Separable Security. Motorola DCH6200, DH6200

4 DIAGNOSTICS

Separable Security

This diagnostic displays information on the inserted M-CARD and CableCARD Interface with the DCH .

Field Description

CARD Interface CableCARD Interface is a status indication of the interface between the Host and CableCARD. It will indicate ‘Good’ if a Native/Legacy resource is established between the host and card, ‘Error’ if an error has occurred when establishing the Native/Legacy resource, or ‘Unsupported CARD’ if the inserted CableCARD is not a Motorola M-CARD in M-Mode.

CableCARD ID

Host ID

Data ID

Validation

Pairing Rpt Method

The unique identifier provided by the CableCARD.

The unique identifier in the Host Device Certificate.

A value generated by the CableCARD for the Pairing report.

•

UKNOWN if a Validation message was not received by the product.

•

VALID or INVALID as set by the Host Validation Message received from the headend.

•

BINDING if the CableCARD is busy with the binding authentication process.

•

NOT BOUND if Card validation status in not bound for

CableCARD reasons.

•

HOST CERTIFICATE INVALID if the status is not bound because the Host Certificate was invalid.

•

HOST SIGN FAILED if status is not bound because of failure to verify Host’s SIGN.

•

AUTH KEY FAILED if status in not bound because of failure to match AuthKey from the Host Device.

•

FAILED if binding failed for other reasons.

Set to ‘MMI’ or ‘Reportback’ as received by a message from the headed, or

32

4 DIAGNOSTICS

Field Description set to ‘Unknown’ if the headend message was not received.

MSO Phone Number

CableCARD

MSO Phone Number as configured at the headend.

33