- Vehicles & accessories
- Motor vehicle electronics
- Remote starters
- Barco
- BarcoReality SIM 6 Ultra MM
- Owner's manual
6.9 Lamp Dimming. Ultra Start 72 SERIES 1172, R9040171, Reality SIM 6 Ultra MM, BarcoReality SIM 6 Ultra MM
Add to my manuals
95 Pages
advertisement
▼
Scroll to page 2
of 95
6.9 Lamp Dimming
What can be done?
The lamp can be dimmed via the lamp dimming feature.
Start Up
1. Press MENU to activate the Toolbar
2. Press
→ to select the Lamp item
3. Press
↓
to Pull down the Lamp menu (image 6-16)
4. Use
↑ or
↓ to select Dimming
5. Press ENTER
A dialogbox is displayed
Select the desired lamp power (image 6-17)
Image 6-16
A projector starts always with full lamp power.
Image 6-17
6. General Menu
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002 41
6. General Menu
42 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download
PDF
advertisement
Table of contents
- 7 1. Packaging and Dimensions
- 7 1.1 Box content
- 7 1.2 Projector Packaging
- 8 1.3 Lens Packaging
- 8 1.4 Dimensions
- 11 2. Installation Guidelines
- 11 2.1 Installation guidelines
- 12 2.2 Configuration
- 13 2.3 Lenses
- 13 2.3.1 Lenses
- 14 2.3.2 Lens formulas
- 15 2.3.3 Lens installation
- 15 2.3.4 Cleaning the lens
- 16 2.4 Batteries
- 16 2.4.1 Battery installation
- 16 2.4.2 Battery replacement
- 19 3. Connections
- 19 3.1 Power connection
- 19 3.2 Input Source connection
- 19 3.2.1 Input facilities
- 19 3.2.2 5-cable input (BNC1)
- 20 3.2.3 5-cable data input (BNC2)
- 20 3.2.4 Video input
- 21 3.2.5 S-Video input
- 22 3.2.6 Digital Visual Interface (DVI) input
- 22 3.2.7 SDI input
- 23 3.2.8 HDSDI input
- 23 3.2.9 Communications
- 23 3.2.9.1 RS232 IN connection
- 25 4. Getting started
- 25 4.1 RCU & Local keypad
- 25 4.2 Terminology overview
- 27 4.3 Switching on
- 28 4.4 Lamp runtime
- 29 4.5 Quick set up adjustments
- 29 4.5.1 Quick lens Adjustment
- 29 4.5.2 Using the RCU
- 30 4.5.3 Projector address
- 31 4.5.3.1 Address setting
- 31 4.5.3.2 Displaying and Programming addresses into the RCU
- 31 4.5.4 Controlling the projector
- 32 4.5.5 Using the menu
- 33 4.5.6 Using the Dialogboxes
- 35 5. Source Selection
- 35 5.1 Source selection
- 36 5.2 Composite Video
- 36 5.3 S-Video selection
- 39 6. General Menu
- 39 6.1 Pause
- 39 6.2 Freeze
- 40 6.3 Standby Timer
- 41 6.4 Identification
- 41 6.5 Runtimes
- 42 6.6 History
- 43 6.7 Reset runtime
- 44 6.8 Runtime warning
- 45 6.9 Lamp Dimming
- 47 7. Image Menu
- 47 7.1 Settings
- 48 7.1.1 Contrast
- 48 7.1.2 Brightness
- 48 7.1.3 Color
- 48 7.1.4 Tint (hue)
- 49 7.1.5 Sharpness
- 49 7.1.6 Gamma
- 49 7.1.7 Phase
- 49 7.2 Aspect ratio
- 50 7.3 Show native resolution
- 51 7.4 Blanking
- 52 7.5 Keystone
- 53 7.6 Color temperature
- 54 7.7 Filmmode detection
- 55 7.8 Advanced settings
- 55 7.8.1 Noise reduction
- 55 7.8.2 Dynamic color depth
- 55 7.9 Input balance
- 55 7.10AGC on Video
- 56 7.11Manual Gain Control
- 57 8. Tools Menu
- 57 8.1 Introduction to PiP
- 59 8.2 PiP select
- 59 8.3 PiP add window
- 60 8.4 PiP remove window
- 61 8.5 PiP layout
- 61 8.5.1 PiP Save
- 61 8.5.2 PiP rename layout
- 62 8.5.3 PiP delete layout
- 63 8.6 PiP Adjust
- 64 8.7 Diagnostics
- 65 9. Signal Menu
- 65 9.1 Switching mode
- 65 9.2 Background
- 67 10.Image files menu
- 67 10.1Load file
- 68 10.2Edit file
- 70 10.3Rename file
- 71 10.4Copy
- 72 10.5Delete
- 73 11.Installation menu
- 73 11.1Lens adjustments
- 74 11.2Projector address
- 75 11.3Orientation
- 76 11.4Full screen representation
- 76 11.5Language
- 77 11.6Quick access keys
- 77 11.7RS232 baudrate
- 78 11.8Centered menu
- 78 11.9Startup screen
- 79 11.10Take screenshot
- 80 11.11Sliderbox position
- 81 11.12AutoImage Setup
- 82 11.13Change password
- 83 11.14Auto file load
- 85 A. Standard Image Files
- 85 A.1 Table overview
- 89 B. Cleaning the Dustfilter
- 89 B.1 Cleaning
- 91 Glossary
- 93 Index