- Vehicles & accessories
- Motor vehicle electronics
- Remote starters
- Barco
- BarcoReality SIM 6 Ultra MM
- Owner's manual
7.7 Filmmode detection. Ultra Start 72 SERIES 1172, R9040171, Reality SIM 6 Ultra MM, BarcoReality SIM 6 Ultra MM
Add to my manuals
95 Pages
advertisement
7. Image Menu
Image 7-12
7.7 Filmmode detection
What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
The filmmode detection insures that these converted signals are shown without artefacts.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press MENU to activate the Toolbar
2. Press
→ to select the Image item
3. Press
↓ to Pull down the Image menu
4. Use
↑ or
↓ to select Filmmode detection
5. Press
→ to pull down the menu
6. Use
↓ or
↑ to enable or disable the Filmmode detection
7. Press ENTER
A white bullet shows the active setting (image 7-13)
Image 7-13
50 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 1. Packaging and Dimensions
- 7 1.1 Box content
- 7 1.2 Projector Packaging
- 8 1.3 Lens Packaging
- 8 1.4 Dimensions
- 11 2. Installation Guidelines
- 11 2.1 Installation guidelines
- 12 2.2 Configuration
- 13 2.3 Lenses
- 13 2.3.1 Lenses
- 14 2.3.2 Lens formulas
- 15 2.3.3 Lens installation
- 15 2.3.4 Cleaning the lens
- 16 2.4 Batteries
- 16 2.4.1 Battery installation
- 16 2.4.2 Battery replacement
- 19 3. Connections
- 19 3.1 Power connection
- 19 3.2 Input Source connection
- 19 3.2.1 Input facilities
- 19 3.2.2 5-cable input (BNC1)
- 20 3.2.3 5-cable data input (BNC2)
- 20 3.2.4 Video input
- 21 3.2.5 S-Video input
- 22 3.2.6 Digital Visual Interface (DVI) input
- 22 3.2.7 SDI input
- 23 3.2.8 HDSDI input
- 23 3.2.9 Communications
- 23 3.2.9.1 RS232 IN connection
- 25 4. Getting started
- 25 4.1 RCU & Local keypad
- 25 4.2 Terminology overview
- 27 4.3 Switching on
- 28 4.4 Lamp runtime
- 29 4.5 Quick set up adjustments
- 29 4.5.1 Quick lens Adjustment
- 29 4.5.2 Using the RCU
- 30 4.5.3 Projector address
- 31 4.5.3.1 Address setting
- 31 4.5.3.2 Displaying and Programming addresses into the RCU
- 31 4.5.4 Controlling the projector
- 32 4.5.5 Using the menu
- 33 4.5.6 Using the Dialogboxes
- 35 5. Source Selection
- 35 5.1 Source selection
- 36 5.2 Composite Video
- 36 5.3 S-Video selection
- 39 6. General Menu
- 39 6.1 Pause
- 39 6.2 Freeze
- 40 6.3 Standby Timer
- 41 6.4 Identification
- 41 6.5 Runtimes
- 42 6.6 History
- 43 6.7 Reset runtime
- 44 6.8 Runtime warning
- 45 6.9 Lamp Dimming
- 47 7. Image Menu
- 47 7.1 Settings
- 48 7.1.1 Contrast
- 48 7.1.2 Brightness
- 48 7.1.3 Color
- 48 7.1.4 Tint (hue)
- 49 7.1.5 Sharpness
- 49 7.1.6 Gamma
- 49 7.1.7 Phase
- 49 7.2 Aspect ratio
- 50 7.3 Show native resolution
- 51 7.4 Blanking
- 52 7.5 Keystone
- 53 7.6 Color temperature
- 54 7.7 Filmmode detection
- 55 7.8 Advanced settings
- 55 7.8.1 Noise reduction
- 55 7.8.2 Dynamic color depth
- 55 7.9 Input balance
- 55 7.10AGC on Video
- 56 7.11Manual Gain Control
- 57 8. Tools Menu
- 57 8.1 Introduction to PiP
- 59 8.2 PiP select
- 59 8.3 PiP add window
- 60 8.4 PiP remove window
- 61 8.5 PiP layout
- 61 8.5.1 PiP Save
- 61 8.5.2 PiP rename layout
- 62 8.5.3 PiP delete layout
- 63 8.6 PiP Adjust
- 64 8.7 Diagnostics
- 65 9. Signal Menu
- 65 9.1 Switching mode
- 65 9.2 Background
- 67 10.Image files menu
- 67 10.1Load file
- 68 10.2Edit file
- 70 10.3Rename file
- 71 10.4Copy
- 72 10.5Delete
- 73 11.Installation menu
- 73 11.1Lens adjustments
- 74 11.2Projector address
- 75 11.3Orientation
- 76 11.4Full screen representation
- 76 11.5Language
- 77 11.6Quick access keys
- 77 11.7RS232 baudrate
- 78 11.8Centered menu
- 78 11.9Startup screen
- 79 11.10Take screenshot
- 80 11.11Sliderbox position
- 81 11.12AutoImage Setup
- 82 11.13Change password
- 83 11.14Auto file load
- 85 A. Standard Image Files
- 85 A.1 Table overview
- 89 B. Cleaning the Dustfilter
- 89 B.1 Cleaning
- 91 Glossary
- 93 Index