Glossary. Ultra Start 72 SERIES 1172, R9040171, Reality SIM 6 Ultra MM, BarcoReality SIM 6 Ultra MM
Add to my manuals
95 Pages
advertisement
Glossary
GLOSSARY
Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal
American power plug to connect the power cord to the wall outlet.
European power plug to connect the power cord to the wall outlet.
speed serial interface with TMDS (Transition Minimized differential signalling) to send data to the display.
DVI can be single or dual link.
of the video or data type.
Address installed in the projector to be individually controlled.
are examples of composite video systems.
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002 87
Glossary
88 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 1. Packaging and Dimensions
- 7 1.1 Box content
- 7 1.2 Projector Packaging
- 8 1.3 Lens Packaging
- 8 1.4 Dimensions
- 11 2. Installation Guidelines
- 11 2.1 Installation guidelines
- 12 2.2 Configuration
- 13 2.3 Lenses
- 13 2.3.1 Lenses
- 14 2.3.2 Lens formulas
- 15 2.3.3 Lens installation
- 15 2.3.4 Cleaning the lens
- 16 2.4 Batteries
- 16 2.4.1 Battery installation
- 16 2.4.2 Battery replacement
- 19 3. Connections
- 19 3.1 Power connection
- 19 3.2 Input Source connection
- 19 3.2.1 Input facilities
- 19 3.2.2 5-cable input (BNC1)
- 20 3.2.3 5-cable data input (BNC2)
- 20 3.2.4 Video input
- 21 3.2.5 S-Video input
- 22 3.2.6 Digital Visual Interface (DVI) input
- 22 3.2.7 SDI input
- 23 3.2.8 HDSDI input
- 23 3.2.9 Communications
- 23 3.2.9.1 RS232 IN connection
- 25 4. Getting started
- 25 4.1 RCU & Local keypad
- 25 4.2 Terminology overview
- 27 4.3 Switching on
- 28 4.4 Lamp runtime
- 29 4.5 Quick set up adjustments
- 29 4.5.1 Quick lens Adjustment
- 29 4.5.2 Using the RCU
- 30 4.5.3 Projector address
- 31 4.5.3.1 Address setting
- 31 4.5.3.2 Displaying and Programming addresses into the RCU
- 31 4.5.4 Controlling the projector
- 32 4.5.5 Using the menu
- 33 4.5.6 Using the Dialogboxes
- 35 5. Source Selection
- 35 5.1 Source selection
- 36 5.2 Composite Video
- 36 5.3 S-Video selection
- 39 6. General Menu
- 39 6.1 Pause
- 39 6.2 Freeze
- 40 6.3 Standby Timer
- 41 6.4 Identification
- 41 6.5 Runtimes
- 42 6.6 History
- 43 6.7 Reset runtime
- 44 6.8 Runtime warning
- 45 6.9 Lamp Dimming
- 47 7. Image Menu
- 47 7.1 Settings
- 48 7.1.1 Contrast
- 48 7.1.2 Brightness
- 48 7.1.3 Color
- 48 7.1.4 Tint (hue)
- 49 7.1.5 Sharpness
- 49 7.1.6 Gamma
- 49 7.1.7 Phase
- 49 7.2 Aspect ratio
- 50 7.3 Show native resolution
- 51 7.4 Blanking
- 52 7.5 Keystone
- 53 7.6 Color temperature
- 54 7.7 Filmmode detection
- 55 7.8 Advanced settings
- 55 7.8.1 Noise reduction
- 55 7.8.2 Dynamic color depth
- 55 7.9 Input balance
- 55 7.10AGC on Video
- 56 7.11Manual Gain Control
- 57 8. Tools Menu
- 57 8.1 Introduction to PiP
- 59 8.2 PiP select
- 59 8.3 PiP add window
- 60 8.4 PiP remove window
- 61 8.5 PiP layout
- 61 8.5.1 PiP Save
- 61 8.5.2 PiP rename layout
- 62 8.5.3 PiP delete layout
- 63 8.6 PiP Adjust
- 64 8.7 Diagnostics
- 65 9. Signal Menu
- 65 9.1 Switching mode
- 65 9.2 Background
- 67 10.Image files menu
- 67 10.1Load file
- 68 10.2Edit file
- 70 10.3Rename file
- 71 10.4Copy
- 72 10.5Delete
- 73 11.Installation menu
- 73 11.1Lens adjustments
- 74 11.2Projector address
- 75 11.3Orientation
- 76 11.4Full screen representation
- 76 11.5Language
- 77 11.6Quick access keys
- 77 11.7RS232 baudrate
- 78 11.8Centered menu
- 78 11.9Startup screen
- 79 11.10Take screenshot
- 80 11.11Sliderbox position
- 81 11.12AutoImage Setup
- 82 11.13Change password
- 83 11.14Auto file load
- 85 A. Standard Image Files
- 85 A.1 Table overview
- 89 B. Cleaning the Dustfilter
- 89 B.1 Cleaning
- 91 Glossary
- 93 Index