advertisement
Part Names
Control Panel
10
11
11
12
14
13
15
LAMP INDICATOR 17
16 18
POWER INDICATOR
KEYSTONE
Adjust the vertical keystone.
11
VOLUME + / -
Sound louder or lower.
1
INPUT
Select input source:
RGB 1 RGB 2
S-Video
Note :
Video
DVI-I
Y,Pb,Pr
If the projector can not be captured the signals within 15 minutes, it will be shut down automatically.
1
MENU
Display or hide the OSD main menu.
1
BLANK
Blank the projected image. The time of
Blank mode can be set in 15 minutes, 30 minutes or 60 minutes. The projector will shut down automatically after passing each set time.
10
1
AUTO
Automatically adjust the setting to match the current input.
1
(POWER)
Power On / Off.
1
LAMP INDICATOR
Indicate a status in the projector.
1
POWER INDICATOR
Light on or flash to indicate the operating status of the projector.
Part Names
Rear
A B C
F H I K M
N
P
D E G J L O
A
USB
Connect the USB cable to a computer to utilize the Interactive functions.
B
RS232
Serial data port for controlling the projector with a computer or other RS-232 control device.
C
AUDIO IN 1 &
D
AUDIO IN 2
Mini jack port corresponds to computer input. (RGB IN→AUDIO IN 1, DVI-1 IN
→AUDIO IN 2)
E
AUDIO OUT
T h i s j a c k o u t p u t s t h e a u d i o s i g n a l from computer signal to external audio equipment.
F
RGB IN
Input analog RGB signal from a computer.
G
RGB OUT
Connect an external monitor to this connection to view the “RGB IN” input.
H
DVI-I IN
Input digital DVI-I signal from a computer.
I
S-VIDEO
S-Video signal from a video source.
J
VIDEO
Composite video signal from a video source.
K
AUDIO IN 3, R / L
RCA type corresponds to video input.
L
COMPONENT ( Y, Pb, Pr / Y,
Cb, Cr)
Input Component signal from a DVD player.
M
LAN
Please see page 37 Network Control
Application for details.
N
REAR IR RECEIVER
O
P
SPEAKER
Slot for Kensington Micro Saver
Security System
Built-in Security Slot
This security slot supports the MicroSaver
®
Security System. MicroSaver
®
is a registered trademark of Kensington Microware Inc.
The logo is trademarked and owned by
Kensington Microware Inc.
11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Contents
- 7 Safety Instructions
- 11 Safety Labels
- 12 Part Names
- 12 Projector
- 13 Control Panel
- 15 Setting Up
- 15 Arrangement
- 16 Power ON / OFF
- 17 Setting Up The Projector
- 18 Ceiling Mounted Installation Guide
- 19 Adjusting The Projector’s Elevation
- 20 How To Connect
- 22 Remote Control
- 24 Menu Operation
- 24 How To Operate On-Screen Display
- 25 MENU (PC Mode)
- 25 Picture Menu (PC Mode)
- 26 Audio Menu (PC Mode)
- 27 Setting Menu (PC Mode)
- 28 MENU (Video Mode)
- 28 Picture Menu (Video Mode)
- 29 Audio Menu (Video Mode)
- 30 Setting Menu (Video Mode)
- 31 Advanced Menu
- 34 Presentation Menu
- 36 Security Menu
- 39 PIN Key In Operation
- 40 Network Control Software Application
- 41 Before Use
- 41 Before Using Network Control Software
- 42 Projector Auto Search
- 44 Modify the Projector Setting
- 45 Registering And Configuring the Projector
- 45 Delete
- 46 Projector Setting
- 47 System Setting
- 48 Monitor / Default Setting / Auto Scan Timer
- 51 Control Panel Window Introduction
- 51 Power Control / Input Source / Function Key
- 52 Function Key / Projector Status
- 53 Network Control Window Introduction
- 54 Maintenance Of Projector
- 54 Air Filter / Replacing the Air Filter
- 56 Lamp / Replacing New Lamp
- 58 Other Care
- 59 Troubleshooting
- 59 Indicator
- 60 Error For Machine Defects
- 62 List of Supported Monitor Displays