PIN Key In Operation. Eiki LC-XIP2600, LC-XIP2600 LCD x3

MENU

PIN Key In Operation

When the projector is turned on and the

PIN LOCK PROTECTION is set to [ON], the image will show as on the right side.

1. Press the MENU button on the projector or remote control. Enter PIN code by keypad or remote control.

2. How to enter a PIN code?

You can use control panel or remote control.

CONTROL PANEL

KEYSTONE REMOTE CONTROL

VOL -

INPUT MENU

VOL+

The control panel and remote control buttons to enter a sequence of PIN code is like the photo below.

Refer to photo below to enter a sequence of PIN code by control panel or remote control buttons.

(1) Press ◄ button: Select the [ 1 ]

(2) Press ▲ button: Select the [ 2 ]

(3) Press ► button: Select the [ 3 ]

(4) Press ▼ button: Select the [ Enter ] to move to next row.(4~6,7~9, ~OK)

(5) Press (backspace) item:

In case you enter a wrong digit, select to delete the wrong digit you entered.

(6) Press item:

Once all four digits of the PIN are entered, select

to confirm.

NOTE

(1) Please enter: 0000 for first-time use.

(2) If the PIN is incorrect, a "Enter new code" message will be shown. Please try again. If the PIN code input is incorrect for three times, a warning message will show up and the projector will shut itself down in 30 seconds.

(3) If you have no idea about the PIN, please contact your dealer for help.

36