advertisement
Control Panel Window Introduction
Network Control Window introduction
Icon
Scan all
Name
Start Auto Scan
Description
Capture the all registered projectors’ information one time only.
According to the system setting, get the projector information automatically.
Stop Auto Capture Stop scanning the projector information.
Auto Search
Open Project File
Search the projector in the same network to register and modify the setting.
Open project file which was saved.
Save Project File Save the registered projector in this project.
System Setting
About
Exit
Register projector
Exit
Setting the projector system reminder message.
Icon content description.
Exit the Network software.
Register projector’s information.
Cancel registered information.
50
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project