5. System Operations. PTN MHD44TP

HDBaseT Matrix Switchers 4x4

 ID looping function. 99pcs WP8 can be looped and controlled together, by ID identifying.

 Programmed by USB or RS232, working with PTN PC software (PS-WP).

 Crystal and backlit buttons with easy user-friendly customizable changeable labels.

 The backlit brightness is controllable.

 Dimension: 11.4cm long and 7cm wide.

5. System Operations

5.1 Usage of IR Remote

Available input channels, range from 1~4, others are unavailable.

Menu buttons, AV and ALL buttons have the same function as the front panel. THROUGH:

To transfer the signals directly to the corresponding output channels

Example: Press “3”, “THROUGH” is to transfer the signals from input channel No. 3 to its corresponding output channels No.3.

Available output channels, range from 1~4.

Each channel has 1 IR IN, 1 COAX, 1

HDBaseT, 1 RS232, and 1 AUDIO outputs, and channel No.1 & No.2 has 1 HDMI output.

Figure 6 IR Remote

MHD44TP can be controlled by its built-in IR receiver or through the IR EYE port by connecting with external IR receiver, or even can be controlled remotely by a far-end IR device through the twisted pair.

PTN Electronics Limited 9 www.PTN-electronics.com