advertisement
Connecting a video device
No video or audio cables are included with your projector.
connect S-video and audio cables
If the video device uses a round, four-prong S-video connector, plug an
S-video cable into that connector on the video device and into the Video 2 connector on the projector. If the device uses a composite video connector, plug a composite video cable into that connector on the video device and into the Video 1 connector on the projector.
For audio, plug a mini-plug audio Y-cable into the Audio in connector on the projector and into the video device’s left and right audio out connectors.
connect video and audio cables
Connect the black power cable to the connector on the back of the projector and to your electrical outlet.
NOTE : Always use the power cable that shipped with the projector. connect power cable
To connect a progressive scan EDTV or HD source, use the Component to
M1 adapter (sold separately).
9
advertisement
Related manuals
advertisement
Table of contents
- 12 Introduction
- 14 Connecting a computer
- 14 Required computer connections
- 16 Displaying a computer image
- 17 Adjusting the image
- 18 Connecting a video device
- 19 Displaying a video image
- 21 Shutting down the projector
- 21 Troubleshooting your setup
- 29 Using the keypad buttons
- 30 Using the remote control
- 31 Using the audio
- 32 Optimizing computer images
- 32 Presentation features
- 32 Optimizing video images
- 32 Customizing the projector
- 33 Using the menus
- 34 Picture menu
- 37 Settings menu
- 41 Maintenance
- 41 Cleaning the lens
- 41 Using the security lock
- 42 Replacing the projection lamp
- 44 Cleaning the lamp filter screens
- 45 Appendix
- 45 Projected image size
- 46 INDEX