Optimizing video images. Ask Proxima C130, User^aEURTMs Guide NMB-003, X3, Proxima C130 DLP, Gemini GEM-P1632, InFocus X3, Gemini GEM-P816, Proxima C130
Add to My manuals50 Pages
advertisement
Optimizing video images
After your video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. For general
information on using the menus, see page 34.
• Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture
• Change the Aspect Ratio. Choose the option that best fits your input
• The remote’s Effect button allows you to assign various features to the button. The default effect is About, which displays information about the projector and current source. You can select among Blank, Mute,
Aspect Ratio, Source, Auto Image, Freeze, and About. See page 39 for
details.
•
Select a Sharpness setting (page 37).
•
Use the Color Control to adjust the color gain (page 37).
•
Adjust the Color Temperature. Select a listed warmth value (page 37).
• Turn on Overscan to remove noise on the edges of the image.
Customizing the projector
You can customize the projector for your specific setup and needs. See
page 38 to page 40 for details on these features.
• For rear projection, turn rear mode on in the Settings>System menu.
• For ceiling mounted projection, turn ceiling mode on in the Set- tings>System menu.
• Specify which source the projector checks first for active video during power-up.
• Specify the function of the Effect button on the remote.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify blank screen colors and start up logos.
• Specify the language viewed on the menus.
• Save settings for the active source as a preset.
33
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 7 Positioning the projector
- 8 Projector and Device Connector Guide
- 8 Computer connections
- 8 Video connections
- 11 Connecting a computer source
- 11 Required computer connections
- 11 Optional computer connections
- 12 Displaying a computer source image
- 13 Adjusting the image
- 14 Using the projector with Windows 98 for the first time
- 16 Connecting a video device
- 17 Video device connections
- 17 Composite video connection
- 17 S-video connection
- 18 VGA connection
- 19 Displaying video
- 19 Adjusting the image
- 21 Shutting down the projector
- 21 Troubleshooting your setup
- 29 Using the remote control
- 30 Using the audio
- 31 Using the keypad buttons
- 32 Optimizing computer images
- 32 Presentation features
- 33 Optimizing video images
- 33 Customizing the projector
- 34 Using the menus
- 35 Picture menu
- 38 Settings menu
- 41 Maintenance
- 41 Cleaning the Lens
- 41 Replacing the Projection Lamp
- 43 Cleaning the Lamp Housing Screens
- 43 Using the security lock
- 44 Appendix
- 44 Projected Image Size
- 44 Red LED Behavior and Projector Errors