Changing the Paper Type. Ricoh CLP22, LP222cn

Monitoring and Configuring the Printer

B

On the [Group] menu, point to [Search Device], and then click [TCP/IP],

[IPX/SPX] or [TCP/IP(SNMPv3)].

A list of printers using the selected protocol appears.

❒ Select the protocol of the printer whose configuration you want to change.

C

Select a printer.

D

On the [Tools] menu, point to [Device Settings], and then click [Protect Printer

Operation Panel].

A Web browser opens and the dialog box for entering the password for the

Web Image Monitor administrator appears.

E

Enter the user name and password, and then click [OK].

Contact your network administrator for information about the settings.

The [System] page of Web Image Monitor appears.

F

Select [Level 1] or [Level 2] in the [Lock Operation Panel Menu] list.

G

Click [Apply].

H

Quit Web Image Monitor.

For details about setting items, see Help in the [General Settings] on [Config-

uration] page.

Changing the Paper Type

Follow the procedure below to change the paper type.

A

Start SmartDeviceMonitor for Admin.

B

On the [Group] menu, point to [Search Device], and then click [TCP/IP],

[IPX/SPX] or [TCP/IP(SNMPv3)].

A list of printers using the selected protocol appears.

❒ Select the protocol of the printer whose configuration you want to change.

C

In the list, select a printer whose configuration you want to change.

D

On the [Tools] menu, point to [Device Settings], and then click [Select Paper

Type].

A Web browser opens and the dialog box for entering the password for the

Web Image Monitor administrator appears.

170