Installation Diagrams. American Dynamics VM16 Plus, RCTT16BE, View Manager 16 Plus

Installation Diagrams

The following pages illustrate the installation of the

VM16+ Enhanced Touch Tracker in the following configurations:

Enhanced Touch Tracker with Multiplexer

(DB25 connection)................................................4

Enhanced Touch Tracker with Multiplexer

(RJ11 connection) ................................................5

Enhanced Touch Tracker with Quad Splitter

(RJ45 connection) ................................................6

Enhanced Touch Tracker with RVQX7X Quad

Splitter ...................................................................7

Enhanced T OUCH T RACKER with Intellex 1.x ...... 8

Enhanced Touch Tracker with Intellex 2.0.........9

Enhanced Touch Tracker with Intellex 2.1.......10

Enhanced Touch Tracker and Duplex Remote

Panel (RVDRP) ...................................................11

Enhanced T OUCH T RACKER with Domes Only (No

External Unit) ......................................................12

Refer to the appropriate diagram when connecting the Enhanced Touch Tracker.

Installation Notes

• Depending on configuration, two Enhanced

T OUCH T RACKERS may be installed. Terminate

E1 on the EIM that is on the end point of the

SensorNet Network.

• The maximum combined SensorNet cable length is 1000 m (one km or 3000').

• J-Box and dome wiring information is included for information purposes only. Refer to the

J-Box or dome installation instructions for complete wiring information.

RCTT16BE VM16 PLUS ENHANCED TOUCH TRACKER

INSTALLATION GUIDE

3 of 15

8000-2672-01, REV. D1