Disassembling the External Modules

Disassembling the HDD Module

1.

Remove the two screws holding the HDD bracket on one side.

2.

Remove another two screws holding the HDD bracket on the other side.

3.

Then take the hard disc drive out of the HDD bracket.

Disassembling the ODD Module

1.

Remove the two screws fastening the ODD bracket.

2.

Remove the ODD bracket from the optical disc drive module.

56 Chapter 3

Chapter 4

Troubleshooting

Use the following procedure as a guide for computer problems.

NOTE: The diagnostic tests are intended to test this model. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses.

1.

Duplicate symptom and obtain the failing symptoms in as much detail as possible.

2.

Distinguish symptom. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation.

3.

Disassemble and assemble the unit without any power sources.

4.

If any problem occurs, you can perform visual inspection before you fellow this chapter’s instructions. You can check the following: power cords are properly connected and secured; there are no obvious shorts or opens; there are no obviously burned or heated components; all components appear normal.

5.

Use the following table with the verified symptom to determine which page to go to.

Symptoms (Verified)

Power failure. (The power indicator does not go on or stay on.)

POST does not complete. No beep or error codes are indicated.

POST detects an error and displayed messages on screen.

Other symptoms (i.e. LCD display problems or others).

Symptoms cannot be re-created (intermittent problems).

Go To

“Power System Check” on page 59.

“Insyde MobilePro BIOS POST Beep Code and

POST Messages” on page 61

“Insyde MobilePro BIOS POST Codes” on page

63

“Undetermined Problems” on page 72

“Insyde MobilePro BIOS POST Beep Code and

POST Messages” on page 61

“Insyde MobilePro BIOS POST Codes” on page

63

“Insyde MobilePro BIOS POST Beep Code and

POST Messages” on page 61

“Insyde MobilePro BIOS POST Codes” on page

63

“Index of Symptom-to-FRU Error Message” on page 67

Use the customer-reported symptoms and go to

“Insyde MobilePro BIOS POST Beep Code and

POST Messages” on page 61

“Insyde MobilePro BIOS POST Codes” on page

63

“Intermittent Problems” on page 71

“Undetermined Problems” on page 72

Chapter 4 57