Installing the Battery and microSD Card. LG VS Vortex Verizon Wireless, MFL67011201(1, VORTEX, VS660 Verizon Wireless

22

The Basics

Installing the Battery and microSD Card

NOTE It is important to fully charge the battery before initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk, use, and standby time. The battery charge level is shown at the top right part of the screen.

Installing the battery

1. Hold the phone with both hands and use the fingertip cutout at the top of the phone to pull open the battery cover (as shown above).

2. Align the battery contacts with the terminals near the bottom of the phone, then press the battery into place.

3. Replace the battery cover over the back of the phone (as demonstrated).

Apply a steady downward pressure until the battery cover clicks into place.

Removing the battery

Turn the power off. Remove the battery cover (as demonstrated in the previous instructions). Then use the fingertip cutout to lift the top edge of the battery out.

Inserting a microSD card

Gently uncover the microSD slot located on the left side of the phone. Position the microSD card facing up and slide it into place until it is fully inserted and locked in place.

23

NOTE The microSD card can be easily damaged by improper operation. Please be careful when inserting, removing or handling it.

To remove the microSD card

1. Unmount the microSD card (see steps below), then uncover the microSD slot located on the left side of the phone.

2. Gently push the exposed edge of the microSD card in with your fingertip to release it from the slot.

3. Carefully pull the microSD card out of the slot and replace the cover to the slot.

NOTE To safely remove the microSD card from your phone, unmount it from your phone first, as described below.

To unmount the microSD card

1. Press the Home Key

Key .

, press the Applications Launcher

2. Touch Settings > SD card & phone storage.

3. Touch Unmount SD card .