Utilities. Netcomm NP725
Add to My manuals55 Pages
Netcomm NP725 is a Multi-Mode Access Point, specially designed for connecting wireless networks for wider coverage. NP725 provides features of Access Point (AP) and Wireless Distribution System (WDS) simultaneously. In the Access Point mode, it supports up to eight Virtual Access Points (VAPs) which could provide service in different levels and much securer network. NP725 Access Point also supports the most popular wireless authentication and encryption standards which make flexible security policy possible by taking advantage of these Virtual Access Points.
advertisement
Chapter 4. Web Management Interface
4.4 Utilities
This section provides information on four utilities used for customizing and maintaining the system, including Admin
Password, Config Save Restore, System Upgrade and Reboot.
4.4.1 Change Password
To protect the management web site from unauthorized access, it is strongly recommended to change the default administrator's password to your own one. Only alpha-numeric characters pattern is allowed and it is strongly recommended to take a combination of both numeric and alphabetic characters.
The administrator can change the password of the system. The login account for the administrator is “admin”. The admin password of the system can be changed here by entering the new password. The default admin password of the system is "admin". Click Apply to activate the new password.
39
advertisement
Related manuals
advertisement
Table of contents
- 4 Introduction
- 4 Overview
- 4 Product Features
- 5 Deployment Topology Examples
- 6 System Overview
- 6 Package Contents
- 6 Hardware
- 8 System Requirement and Preparation
- 9 Installation
- 9 Wireless LAN Access Point Connection
- 10 Basic Configuration
- 20 Web Management Interface
- 23 System
- 23 System Information
- 26 Network Settings
- 27 Management Services
- 28 Virtual AP Overview
- 31 General Settings
- 32 VAP Configuration
- 33 Security Settings
- 36 Advanced Wireless Settings
- 37 Access Control Settings
- 40 WDS Link Overview
- 41 WDS Link Settings
- 42 Utilities
- 42 Change Password
- 43 Configuration Save / Restore
- 44 System Upgrade
- 45 Reboot
- 46 Status
- 46 System Overview
- 48 Associated Client Status