Reboot. Netcomm NP725

Netcomm NP725 is a Multi-Mode Access Point, specially designed for connecting wireless networks for wider coverage. NP725 provides features of Access Point (AP) and Wireless Distribution System (WDS) simultaneously. In the Access Point mode, it supports up to eight Virtual Access Points (VAPs) which could provide service in different levels and much securer network. NP725 Access Point also supports the most popular wireless authentication and encryption standards which make flexible security policy possible by taking advantage of these Virtual Access Points.

Chapter 4. Web Management Interface

4.4.4 Reboot

This function allows the administrator to restart the NP725 safely. The process should take about three minutes.

Click Reboot button to restart the system. Please wait for the blinking timer to finish before accessing the system web management interface again.

Occasionally, it is necessary to reboot NP725 to ensure parameter changes being submitted.