Design. Brant Radiant Heaters LR-LB1 Series
Add to my manuals12 Pages
Brant Radiant Heaters LR-LB1 Series LED Bay Lighting Fixtures are designed to illuminate industrial locations and can reduce energy use and maintenance needs, improve safety, and reduce CO2 emissions. With a typical mounting height of 8-24 ft. from the ground, these durable fixtures are IP65 certified (Ingress Protection Rating), meaning they are both dust-tight and protected against water projected from a nozzle. This makes them perfect for use in demanding environments. The LR-LB1 Series can dim from 10% to 100%, allowing for adjustable brightness levels to suit specific needs.
advertisement
2.0
Specifications • Design • Sample Lighting Layout
2.0
Specifications
LR-LB1 Series
Chart 2.1 • LED Bay Lighting Specifications
MODELS
LR-LB1_6PG-3W
LR-LB1_10PT-3W
LR-LB1_10PT-4W
Limited Warranty: 5-Years
DESCRIPTION
LR-LB1 Fixture with 6 ft. Plug 18/3
LR-LB1 Fixture with 10 ft. Pigtail 18/3
LR-LB1 Fixture with 10 ft. Pigtail 18/4
Watts
(w)
97
97
97
Colour
(k)
5,000
5,000
5,000
Lumens
(l)
8,600
8,600
8,600
1 Recommended mounting height allowance will depend on proper building evaluation.
Amps
(A)
Typical
Mount
0.80
8-24 ft.
1
0.80
8-24 ft.
0.80
8-24 ft.
Weight
(lbs.)
5
5
5
Product can dim from 10% to 100%
Operating temperature range: -40°C to +45°C (-40°F to 113°F).
CSA/DLC certified for indoor and outdoor applications, IP65 certified, and NEMA 4X certified.
IP Code Definition and Explanation of IP65 Rating
The IP Code, International Protection Marking, IEC standard 60529, also interpreted as Ingress Protection
Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.
Solid Particle Protection: The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects. 6: Totally protected against dust ingress.
Liquid Ingress Protection: The second digit indicates the level of protection that the enclosure provides against harmful ingress of water. 5: Protected against low pressure jets of water from all directions - limited ingress
Design
When designing a layout for a particular application, there are several factors that should be taken into consideration.
The typical mounting height for model LR-LB1 is 8 - 24 ft. from the ground. This mounting height is a recommendation only. The facility usage purpose, colour scheme, desired brightness levels, and overall facility size will all factor into the layout of the lighting fixtures.
These LED Lighting Fixtures are NEC Class 1 compliant. Check applicable province, local, and national codes before designing and installing lighting fixtures.
A common misconception with LED lighting is the belief that they do not generate heat. While it is true that LED fixtures produce much less heat than other forms of lighting due to the increased efficiency and lower power consumption, thermal management is still a crucial component of a well-designed LED fixture. The LR-LB1 fixtures have been designed to not only enclose the LEDs and circuitry, but to act as a heat sink as well. These fixtures utilize state of the art thermal interface materials to conduct the heat from the LED module to the housing. The housing has been geometrically designed with a large surface area for excellent convection of heat away from the housing. As a result, the LR-LB1 series fixture is warranted for 50,000 hours of use within an ambient temperature of up to 45°C (113°F). For maximum long-term reliability, this light should be installed in free air.
4 5
4
LR-LB1 Series 2.0
Specifications • Design • Sample Lighting Layout
Figure 2.1 • Sample Lighting Layout - Maintenance Hangar
90.0’ Notes:
- Airplane Repair
Hanger
- 19 ft Ceiling
- Dark Walls
and Floor
- High Light Output
Desired
65.0’
Chart 2.2 • Sample Lighting Layout Statistics
Description
Airplane Hanger
Symbol
+
Avg
49.6 fc
Max
61.5 fc
Min
29.6 fc
Max/Min
2.1:1
Avg/Min
1.7:1
Chart 2.3 • Sample Lighting Layout Schedule
Symbol Label Qty.
Catalog
Number Lamp
Number
Lamps
Lumens
/Lamp Description Wattage Polar Plot
A 39
LR-LB1
(100%
Output)
144 White LEDs.
Lumen Output=
8,599 LMS.
1 8,599
Brant Radiant
Heaters
LED Bay
Luminaire
97.07
Max: 3476cd
5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project