Set GEP Definition. Xerox FreeFlow Variable Information Suite

Smart Editor

Middle colors are used.

Tint

Active when the Gradient Color type is selected, enter a number ranging from 0 to 2, which is used to apply a common tint to the entire gradient.

0 to 1 Light tints from white to plain colors

1

1 to 2

Plain color

Dark tints from plain colors to black

Direction

Active when the Gradient Color type is selected, select either horizontal or vertical direction in which to apply the gradient.

Clear Dry Ink

Active when the CMYK Color type is selected and Separation Color Space is either /SCS_SV or /SCS_V or /SCS_CMYKV, enter a value between 0 and 1.

Spot Color

Active when the CMYK Color type is selected and Separation Color Space is /SCS_SV, populated custom PANTONE color list.

The Set GEP Definition option accesses the Insert SETGEP Command dialog. Use this dialog to define a GEPkey.

Xerox ® FreeFlow ® VI Design Pro

User Guide

205

Smart Editor

GEP Key Name

Enter the name of the GEPKey you are defining.

Line Width

Enter the value for the line width of the outline border. 0 indicates no border.

Border Color

Use the drop-down list to select the border color.

Border Pattern

Use the drop-down list to select the border pattern.

Dash Pattern

Use to define the dash pattern for the outline border. 0 indicates a solid line. It may be either a single number defining the equal width of filled and unfilled portions or a list specifying the initial offset and a width sequence.

Fill Color

Use the drop-down list to select the fill color.

Fill Pattern

Use the drop-down list to select the fill pattern.

206 Xerox ® FreeFlow ® VI Design Pro

User Guide