advertisement
Appendix A
Product Specifications
Optical and Read Performance Parameters
Parameter
Scan Volume
Minimum Resolution
Depth of Field
(100% UPC Labels)
Minimum Print Contrast
Ratio
Skew (Yaw)
Pitch
Roll
Specification
250 cubic inches
5 mil
0 - 8” (0 - 20.32cm)
25%
± 75
± 65
Between 0 and 360
Scanner Dimensions
6"
15.24cm
3.3"
8.38cm
5.6"
14.22cm
Product Reference Guide 149
Physical Properties
Parameter Specification
Dimensions (Scanner only): 6” x 5.6” x 3.3” (WxHxD)
Weight (Scanner) 1 lb 4.6 oz (0.584kg)
Electrical Parameters
Parameters
AC Power Requirements
AC Power Consumption
Operating (Maximum)
Operating (Nominal)
Sleep mode
DC Power Requirements
Input Voltage
Operating Current and Power at 12V
DC
Maximum Inrush
Maximum Continuous
Nominal Scanner Only
Sleep, Scanner Only
Specification
AC Input: 90-264 VAC, 47~63Hz
Real Power
8.75Watts
2.8Watts
2.0Watts
Reference for POT user
7 to 14 V DC
Current
715mA
545mA
180mA
123mA
Power
8.6 Watts
6.6 Watts
2.2 Watts
1.5 Watts
Environmental Parameters
Specification Parameter
Contaminants
Water and Dust
Temperature Ranges:
Operating
Storage
Ambient Light Indoor
Ambient Light Outdoor
Humidity
Beeper/Speaker
Vibration
IP5x
32
F to +104
F (0
C to +40
C)
-40
F to +158
F (-40
C to +70
C)
0 - 6,000 lux
0 - 86,100 lux
5% to 95% non-condensing
70-90dBA at a distance of 3’-3” (1 meter)
Retail/Office
Other Parameters
Parameter
EAS Support
Specification
YES (Checkpoint)
150 Magellan™ 3200VSI
LED and Beeper Indicators
The scanner’s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner. The tables below list these indications. The scanner’s functions are programmable, and so may or may not be turned on.
For example, certain indications, such as the power-up beep can be disabled using programming bar code labels.
Table 1. LED Indications
LED
INDICATION
Power-on
indication
Good Read
Indication
INDICATION
Bright green flash
Bright green flash
COMMENT
Indicates the scanner has finished all its power up tests and is now ready for operation.
Indicates a bar code has been read and decoded.
Scanner Ready
Sleep Mode
Host Disable
Diagnostics
Prog. Mode
Constant dim green
Green LED slowly and continuously changes from off to dim to off.
Constant green flash at 1 Hz
(100mS on, 900mS off)
Varies (see Error Codes on page 4
for more information)
See Host Disable above.
The scanner is ready for operation. The LED is also configurable to off when idle and ready for operation
The scanner is in Sleep Mode. To wake the scanner up, move an object in front of its window or press the button atop the unit. This indication is configurable and may be programmed to behave differently.
The scanner is disabled due to receiving a disable command from the POS terminal.
The LED can provide diagnostic feedback if the scanner discovers a problem during SelfTest.
The scanner is in Programming Mode.
Product Reference Guide 151
BEEPER FUNCTIONS
BEEPER
INDICATION
INDICATION COMMENT
Power On Beep
Good Read
Indication
Diagnostics
Single beep
Single beep
Varies (see Error Codes on page 4
for more information)
The Power-On Beep indication is a configurable feature which can be enabled or disabled. When enabled, this beep
Indicates the scanner has finished all its power up tests and is now ready for operation.
The good read beep indication is configurable. Options include: Enable/disable, frequency, duration and volume.
See
LED and Beeper Indicators on page 2-25 for more
information.
The Beeper can provide diagnostic feedback if the scanner discovers a problem during SelfTest.
Programming
Mode
Indications
Varies depending upon the feature(s) being configured.
The Beeper will sound as programming bar code labels are scanned, indicating progress during scanner configuration.
152 Magellan™ 3200VSI
advertisement
Related manuals
advertisement
Table of contents
- 3 Table of Contents
- 9 Getting Started
- 9 About This Manual
- 9 Manual Conventions
- 10 Connecting the Scanner
- 12 Error Codes
- 12 LED Class
- 13 Mount Installation
- 14 Wall Mount
- 14 Countertop Mount
- 15 LED and Beeper Indicators
- 17 Programming
- 17 Introduction to Label Programming
- 17 Understanding the Basics
- 17 Using the Programming Bar Codes
- 18 Resetting the Standard Product Defaults
- 18 Data Matrix Programming Labels
- 19 Using a Bar Code Mask
- 19 Going Green
- 20 Bar Code Mask
- 21 General Features
- 21 Double Read Timeout for Linear Labels
- 23 Double Read Timeout for 2D Labels
- 24 Scanner Button Options
- 25 Camera Button Mode
- 26 Auto Cell Phone Mode
- 26 Auto Cell Phone Mode Enable
- 27 LED Level
- 28 Auxiliary Port Mode
- 29 Auxiliary Port Baud Rate
- 30 Productivity Index Reporting (PIR)
- 31 Sleep Mode
- 33 LED and Beeper Indicators
- 33 Power On Alert
- 33 External Read Indicator (ERI) Active State High
- 34 ERI Timeout
- 35 Good Read: When to Indicate
- 36 Good Read Beep Control
- 36 Good Read Beep Frequency
- 37 Good Read Beep Length
- 38 Good Read Beep Volume
- 39 Scanning Features
- 39 Wake Up Intensity
- 41 Image Capture
- 41 Image Capture
- 41 How to Capture an Image
- 41 Image Capture to a microSD Card by Scanning a Special Label
- 42 Image Capture to the Host by Host Command
- 43 Image Compression
- 43 Image Format
- 44 Image Size
- 45 Image Brightness
- 45 Image Contrast
- 47 Interface Related Features
- 49 Interface Selection
- 51 Interface Features
- 51 Obey/Ignore Host Commands
- 51 Host Transmission Buffers
- 52 RS-232 Interface Features
- 54 Hardware Flow Control
- 55 Intercharacter Delay
- 56 Software Flow Control
- 57 Host Echo
- 58 Host Echo Quiet Interval
- 59 Signal Voltage: Normal/TTL
- 60 RS-232 Invert
- 60 Beep on ASCII BEL
- 60 Beep on Not on File
- 61 ACK NAK Options
- 62 ACK Character
- 62 NAK Character
- 63 Retry on ACK NAK Timeout
- 63 ACK NAK Timeout Value
- 64 ACK NAK Retry Count
- 64 ACK NAK Error Handling
- 65 Transmission Failure Indication
- 66 Single Cable RS-232
- 66 Single Cable RS-232 Options
- 67 Single Cable RS-232 RTS CTS Selection
- 68 Single Cable RS-232 Use BCC
- 68 Single Cable RS-232 Use ACK/NAK
- 69 Single Cable RS-232 Use STX
- 69 Set Single Cable RS-232 STX Character
- 70 Single Cable RS-232 Use ETX
- 70 Set Single Cable RS-232 ETX Character
- 71 Single Cable Pacesetter Plus
- 71 Single Cable Datalogic Extensions
- 72 USB-OEM Interface Features
- 72 USB-OEM Device usage
- 72 IBM
- 72 IBM Transmit Labels in Code 39 Format
- 73 Keyboard Wedge
- 73 USB Keyboard
- 75 Caps Lock State
- 76 Power-On Simulation
- 77 Control Characters
- 78 Wedge Quiet Interval
- 79 Intercharacter Delay
- 79 USB-COM Interface Setup
- 81 Data Editing
- 81 Data Editing Overview
- 81 Please Keep In Mind...
- 82 Global Prefix/Suffix
- 83 AIM ID
- 84 Label ID
- 90 Case Conversion
- 91 Character Conversion
- 93 Symbologies
- 94 UPC-A
- 94 Disable/Enable UPC-A
- 94 Check Digit Transmission
- 95 Number System Transmission
- 95 Expand UPC-A to EAN-13
- 96 UPC-E
- 96 Disable/Enable UPC-E
- 96 Check Digit Transmission
- 97 Number System Digit
- 97 Expand to UPC-E to UPC-A
- 98 Expand UPC-E to EAN13
- 98 UPC/EAN Quiet Zone
- 99 GTIN
- 99 Expand UPC/EAN to GTIN
- 100 EAN-13
- 100 Disable/Enable EAN-13
- 100 Check Digit Transmission
- 101 EAN-13 Flag 1 Character
- 101 ISBN
- 102 EAN-8
- 102 Disable/Enable EAN-8
- 102 Check Digit Transmission
- 102 Expand EAN-8 to EAN-13
- 103 EAN Two-Label
- 103 EAN Two-Label Combined Transmission
- 104 Price Weight Check Digit
- 105 Add-ons
- 107 GS1 DataBar Omnidirectional / Stacked Omnidirectional
- 107 Disable/Enable GS1 DataBar Omnidirectional
- 107 UCC/EAN 128 Emulation
- 108 GS1 DataBar Expanded / Expanded Stacked
- 108 Disable/Enable GS1 DataBar Expanded
- 108 GS1-128 Emulation
- 109 GS1 DataBar Expanded Length Control
- 109 GS1 DataBar Expanded Length 1, Length 2 Programming Instructions
- 110 Coupon Read Control
- 111 GS1 DataBar Limited
- 111 Disable/Enable GS1 DataBar Limited
- 111 GS1-128 Emulation
- 112 Code 39
- 112 Disable/Enable Code 39
- 112 Check Character Calculation
- 113 Check Character Transmit
- 113 Start/Stop Characters
- 114 Code 39 Full ASCII
- 115 Code 39 Length Control
- 115 Code 39 Length 1, Length 2 Programming Instructions
- 116 Code 32 Italian Pharmacode
- 116 Disable/Enable Code 32 Italian Pharmacode
- 116 Start/Stop Characters
- 116 Check Character Transmit
- 117 Code 128
- 117 Disable/Enable Code 128
- 117 Disable/Enable EAN 128
- 118 Transmit Function Characters
- 118 Length Control
- 119 Code 128 Length 1, Length 2 Programming Instructions
- 119 Code 128 Conversion to Code 39
- 120 Interleaved 2 of 5
- 120 Disable/Enable Interleaved 2 of 5
- 120 Check Digit Calculation
- 120 Check Digit Transmit
- 121 Interleaved 2 of 5 Length Control
- 121 Interleaved 2 of 5 Length 1, Length 2 Programming Instructions
- 122 Codabar
- 122 Disable/Enable Codabar
- 122 Check Character Verification
- 123 Check Character Transmit
- 123 Codabar Length Control
- 124 Codabar Length 1, Length 2 Programming Instructions
- 124 Start/Stop Character Type
- 125 Start/Stop Character Transmission
- 125 Start/Stop Character Match
- 126 Code 93
- 126 Disable/Enable Code 93
- 126 Length Control
- 127 Code 93 Length 1, Length 2 Programming Instructions
- 128 MSI
- 128 Disable/Enable MSI
- 128 MSI Check Character Transmit
- 129 MSI Check Character Calculation
- 129 MSI Number of Check Characters
- 130 MSI Length Control
- 130 MSI Length 1, Length 2 Programming Instructions
- 131 2D Symbologies
- 132 PDF 417
- 132 Disable/Enable PDF 417
- 132 Allow Zero Length PDF 417 Reading
- 133 PDF 417 Length Control
- 134 PDF 417 Length 1, Length 2 Programming Instructions
- 135 Micro PDF 417
- 135 Disable/Enable Micro PDF 417
- 136 Micro PDF 417 Length Control
- 137 Micro PDF 417 Length 1, Length 2 Programming Instructions
- 138 Datamatrix
- 138 Disable/Enable Datamatrix
- 139 Datamatrix Length Control
- 140 Datamatrix Length 1, Length 2 Programming Instructions
- 141 QR Code
- 141 Disable/Enable QR Code
- 142 QR Code Length Control
- 142 Configuring Variable Length Decoding:
- 143 QR Code Length 1, Length 2 Programming Instructions
- 144 Maxicode
- 144 Disable/Enable Maxicode
- 145 Maxicode Length Control
- 145 Configuring Variable Length Decoding:
- 146 Maxicode Length 1, Length 2 Programming Instructions
- 147 Aztec
- 147 Disable/Enable Aztec
- 148 Aztec Length Control
- 148 Configuring Variable Length Decoding:
- 149 Aztec Length 1, Length 2 Programming Instructions
- 150 Composite Labels
- 150 Disable/Enable GS1 DataBar Omnidirectional 2D Component
- 150 Disable/Enable GS1 DataBar Expanded 2D Component
- 151 Disable/Enable GS1 DataBar Limited 2D Component
- 152 Advanced Decoding Features
- 152 Inverse Label Reading
- 153 References
- 153 Global Prefix/Suffix
- 154 Label ID
- 155 Length Control
- 155 Configuring Variable Length Decoding:
- 156 Length 1, Length 2 Programming Instructions
- 157 Product Specifications
- 157 Optical and Read Performance Parameters
- 157 Scanner Dimensions
- 158 Physical Properties
- 158 Electrical Parameters
- 158 Environmental Parameters
- 158 Other Parameters
- 159 LED and Beeper Indicators
- 161 Cable Pinouts
- 161 Standard Cable Pinouts (Primary Interface Cables)
- 162 Cable Pinouts (Handheld Scanner Attached via the Aux Port)
- 163 Alpha-Numeric Pad
- 165 Factory Default Settings
- 165 Factory Defaults by Interface
- 173 Keyboard Function Key Mappings
- 173 Keyboard Model Cross Reference
- 181 Host Commands
- 181 Accepting RS-232 Commands
- 183 Sample Symbols
- 183 1D Symbol Samples
- 185 2D Sample Symbols
- 186 Composite Sample Symbols
- 187 microSD Card
- 187 microSDHC Compatibility
- 187 microSD Card Insertion
- 188 microSD Card Removal
- 188 Autorun File Processing
- 189 microSD Function Summary
- 189 microSD Function Details
- 189 From Scanner to microSD Card
- 189 Capture and save an image to a microSD card by scanning a label.
- 190 Export a Configuration file from the Scanner to the microSD card
- 190 Export Scanner Status to microSD card
- 191 From microSD Card to Scanner
- 191 Application code load to scanner
- 191 Configuration load to scanner
- 193 Handheld Data Format Requirements
- 193 Handheld Data Format Requirements General
- 194 Datalogic Handheld Data Format Requirements
- 194 RSS-14
- 194 RSS Expanded
- 194 UPC-A
- 194 UPC-A with 2-Digit Supplemental
- 194 UPC-A with 5-Digit Supplemental
- 194 UPC-A with Code 128 Supplemental
- 195 UPC-E
- 195 UPC-E with 2-Digit Supplemental
- 195 UPC-E with 5-Digit Supplemental
- 195 UPC-E with Code 128 Supplemental
- 196 EAN-8
- 196 EAN-8 with 2-Digit Supplemental
- 196 EAN-8 with 5-Digit Supplemental
- 196 EAN-8 with Code 128 Supplemental
- 196 EAN-13
- 196 EAN-13 with 2-Digit Supplemental
- 196 EAN-13 with 5-Digit Supplemental
- 197 EAN-13 with Code 128 Supplemental
- 197 Code 39
- 197 Code 39-Pharmacode
- 197 I 2 of 5
- 198 Codabar
- 198 Code 128
- 199 MSI
- 199 Code 93
- 199 PDF417
- 200 AIM Formats
- 200 UPC-A
- 200 UPC-E
- 200 EAN-13
- 200 EAN-8
- 200 2-Digit Supplemental
- 200 5-Digit Supplemental
- 202 Code 128 Supplemental
- 202 Bookland
- 202 Code 39
- 202 Codabar
- 203 MSI
- 203 Code 93
- 203 RSS-14
- 203 RSS Expanded
- 203 I 2 of 5
- 203 Code 128 / EAN128
- 204 PDF417
- 204 “Unknown” AIM ID (an AIM ID which is not specified above)