Status. AMX NXV-300

Setup Pages and Descriptions

Status

The

Status

page (FIG. 7) is the first page viewed when entering the

Setup

page interface from the main touch panel pages. The

Status

page may be reached by pressing and holding down the

Reset

button on the front of the device for six seconds.

Display

FIG. 7

Status Page

Current time Info Date Protected Setup

The elements of the

Status

page are described in the table below:

Status Page Elements

Connection Status icon:

Connection Status:

Display:

Info:

Protected Setup:

Current Time/Date

Exit:

This visual display of the connection status allows the user to have a current update of the panel’s connection status regardless of what page is currently active.

• A Lock only appears on the icon if the panel has established a connection with a currently secured target Master (

requiring a username and password

).

Displays whether the panel is communicating externally, the encryption status of the communicating Master, what connection type is being used (

Ethernet

only), and of what System the panel is a part.

This visual display of the connection status is also reflected at the upper-right of each firmware page. This allows the user to have a current visual update of the panel’s connection status regardless of what page is currently active.

• The word "

Encrypted

" appears only when an encrypted connection is established with a target Master. Otherwise, the status reads "

No

Encryption

".

• When a connection is established, the message displayed is: "

Connected via

Ethernet

".

• If no connection can be established by the Modero panel, it will continue to try and establish a connection while displaying: "

Attempting via...

".

• The panel must be rebooted before incorporating any panel communication changes and detecting any active Ethernet connections.



The Ethernet connection is only detected after the panel is rebooted.

• This button opens the

Display

page (page 12).

• This button opens the

Panel Information

page (page 13).

• This button opens the

Protected Setup

page (page 17).

• The time and date in these fields are provided by the Master.

Returns to the Main touch panel page. In this case, the previous page is the default Main page.

NXV-300 Modero Virtual Touch Panel 11