Input Commands. AMX NXV-300

NetLinx Programming

Input Commands

These Send Commands are case insensitive.

Input Commands

^KPS

Set the keyboard passthru.

Syntax:

"'^KPS-<pass data>'"

Variable:

pass data

:

<blank/empty> = Disables the keyboard.

0 = Pass data to G4 application (default). This can be used with VPC or text areas.

1 - 4 = Not used.

5 = Sends out data to the Master.

Example:

SEND COMMAND Panel,"'^KPS-5'"

Sets the keyboard passthru to the Master. Option 5 sends keystrokes directly to the



Master via the Send Output String mechanism. This process sends a virtual keystroke command (^VKS) to the Master.

Example 2:

SEND COMMAND Panel,"'^KPS-0'"

Disables the keyboard passthru to the Master.

The following point defines how the parameters within this command work:

• Accepts keystrokes from any of these sources: attached USB keyboard or Virtual keyboard.

^VKS

Send one or more virtual key strokes to the G4

 application.

Key presses and key releases are not distinguished except in the case of CTRL, ALT, and

SHIFT.

Refer to theEmbedded Codes table on page 71

that define special characters which

can be included with the string but may not be represented by the ASCII character set.

Syntax:

"'^VKS-<string>'"

Variable: string = Only 1 string per command/only one stroke per command.

Example:

SEND COMMAND Panel,"'^VKS-'8"

Sends out the keystroke 'backspace' to the G4 application.

70 NXV-300 Modero Virtual Touch Panel