advertisement
2
2.1
Safety
Intended use
2.1.1 Environmental
This product is only for indoor use and connecting of computers.
Don´t use and store it inside humid rooms or near water.
Don´t use it close to source of heat. The additional heat could lead to overheating and fire.
2.1.2 Disposal
Don´t put this device to normal waste.
Please read the instruction in chapter 8 for disposal of packaging and device.
2.2 General information
Please read this manual carefully before installing or using this product.
Keep this manual and pass it by passing of the product.
Please follow the instructions and warning of this manual before using the product.
The inobservance of this manual can effect violations and damage.
We disclaim liability for violations and damages caused by inobservance of this manual.
2.3 Danger and protection
Don´t damage the cable.
Don´t use patched or damaged cable.
Don´t put the device close to heating.
In case of strange noise or smell pull the power cord out of the socket.
Don´t open the device.
Please ensure, that all cables will be fixed permanently.
Keep the product away from children.
Don´t remove the cable with wet hands (electric strike).
Don´t use the product with wet hands (electric strike).
Please remove the power cord from socket in case of longer non-use
(Could led to overheating, fire hazard or electric strike).
Keep the product free of dust (Overheating or fire).
Look for sufficient airflow to avoid overheating and fire.
Leave service or cleaning only authorized qualified personnel.
Manual Rackmount KVM RJ45 Series 4 of 16
06.08.2019
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Basic information
- 3 Introduction
- 3 Scope of delivery
- 3 General information
- 4 Safety
- 4 Intended use
- 4 Environmental
- 4 Disposal
- 4 General information
- 4 Danger and protection
- 5 Product information
- 5 Hardware requirements
- 5 Features
- 6 Front view
- 7 Rear view
- 8 Dongle
- 9 Mounting into a Rack
- 9 Installation and implementing
- 9 Direct connection
- 9 Cascading
- 10 Operating
- 11 Handling
- 11 Toggle by switches
- 12 Toggle by hotkeys
- 14 Maintenance
- 14 Disposal
- 14 Warranty terms
- 15 Contact