advertisement
6.2 Toggle by On-Screen menue
To start the On-Screen menue press
„Ctrl“ or „Scroll“ twice.
PN
QV
Available ports.
The port, marked by arrow is actually selected.
Quick view.
Port in Quick view list are marked with the triangle.
PC Displays online computers
Name Name of port if spezified.
F1 GOTO
F2 SCAN
The GOTO function allows you to switch directly to the connection port by typing the port name or its port number.
The "SCAN" function allows you to perform automatic port scanning of the connected computers. Users can switch ports in order to view the corresponding port computer status.
The SCAN function can automatically scan from current selected port, the scan interval can be set by users.
When scanning, a small window on the screen indicates the current port number.
Press [Space] to stop scanning, and the KVM switches to the port last scanned.
F3 LIST Choose between different view lists.
ALL
QVIEW
Manual Rackmount KVM RJ45 Series
Shows all ports.
Shows Quick View list.
12 of 16
06.08.2019
F4 QV
F5 EDIT
F6 SET
Manual Rackmount KVM RJ45 Series
POWERED ON Shows only turned on computers.
POWERED ON+ Shows turned on computers from Quick View list.
QVIEW+NAME Shows named ports from Quick View list.
NAME Shows only named ports.
Choose option with arrow keys and press Enter.
Selects a port for Quick View. Selection will be shown by a triangle.
Deselect port by pressing F4 again
Give a name to a port. Choose first a port and then press F5.
Then entert he name of the port.
Set up On-Screen menue.
Choose option with arrow keys and press Enter.
OSD ACTIVATING HOTKEY
Short keys to open the OSD.
CTRL + CTRL HOTKEY is Ctrl
SCRLL + SCRLL HOTKEY is Scrl
ALT + ALT HOTKEY is Alt
SHIFT + SHIFT HOTKEY is Shift
SWITCH HOTKEY
Short keys to switch ports.
CTRL + CTRL + NUM HOTKEY is Ctrl.
SCRLL + SCRLL + NUM HOTKEY is Scrl
ALT + ALT + NUM HOTKEY is Alt
SHIFT + SHIFT + NUM HOTKEY is Shift
NUM is the wished port (E.g. 2 for port 2).
SCAN DURATION
Selects the scan interval
Possible: 3, 5, 10, 15, 20, 30, 40 and 60 seconds
SCAN DURATION
Selects scan duration for each port
SET PASSWORD
Change password
13 of 16
06.08.2019
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Basic information
- 3 Introduction
- 3 Scope of delivery
- 3 General information
- 4 Safety
- 4 Intended use
- 4 Environmental
- 4 Disposal
- 4 General information
- 4 Danger and protection
- 5 Product information
- 5 Hardware requirements
- 5 Features
- 6 Front view
- 7 Rear view
- 8 Dongle
- 9 Mounting into a Rack
- 9 Installation and implementing
- 9 Direct connection
- 9 Cascading
- 10 Operating
- 11 Handling
- 11 Toggle by switches
- 12 Toggle by hotkeys
- 14 Maintenance
- 14 Disposal
- 14 Warranty terms
- 15 Contact