advertisement
Step 7
Set On-disc Print Image (Label) for Media
The next step is to prepare a print image that can be used by the DiscJuggler software to print text or graphics on your CD-Rs or DVD-Rs. To do this, you will use the Discus labeling software provided with your Elite.
• Minimize the DiscJuggler screen and on the desktop, click on the Discus icon. The labeling software will open.
• Double click on the label type (CD Label).
• You will see a window similar to the illustration below. Click on the Text tab.
Click the New button (below the Canvas tab) and type “Test Label.” Click the
OK button. The text will appear in the center of the label.
• When you move the arrow over the text box, it will change to a hand. Left click and drag the text box to the top of the CD.
• You can change the font or enlarge the text with the options on the left side of the window.
T
www.discmakers.com 1-888-800-4041 15
• The DiscJuggler software uses *.prn files for printing. Choose File / Print from the menu bar. Examine the Printer name window for your printer. The default is the CD Color Printer IV. If you purchased the Autograph Pro printer, use the drop down carrot at the right of the printer window to change to the
CD Color Printer Pro.
• Click the Print to File box (below the properties button), then click the OK button. The pop up window should match the screen below.
• You will see a pop up box titled Print to File with a window inside named
Output File Name. Type c:\printtest.prn. Be sure to include the *.prn at the end of the file name. Click the OK button and the label in *.prn format will be generated and saved in the highest directory level of your C drive.
• Minimize the Discus LE software and maximize the DiscJuggler software.
T
www.discmakers.com 1-888-800-4041 16
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Warranty
- 5 Description
- 6 Hardware Configuration
- 7 Unpacking the Hardware
- 8 Installation of the Pick Arm
- 9 Installing Firewire PCI card into PC
- 10 Installation and Connection of AC Power, Firewire, and Serial Link
- 11 Installation of the Autograph On-disc Printer
- 12 Turn the System On and Boot Up
- 13 Start the Duplication Process
- 15 Set On-disc Print Image (Label)
- 17 Set Printer Image for DiscJuggler
- 18 Cycle Only Option
- 19 Start the Job
- 20 Troubleshooting