advertisement
BERNINA
®
Embroidery Module/Machine
Rotating Designs
Mastering
Your
BERNINA
®
deco
330
The deco 330 rotates designs in clockwise increments of 45º
(1x = 45º, 2x = 90º, 3x = 135º....)
Select indicated motif. Select
Editing tab. Use positioning arrows or touch screen to move the motif up and to the right.
Select Pattern selection tab.
Select motif again. Touch Rotate
45º. Move design to right.
Select Pattern selection tab.
Select motif again. Touch Rotate
45º two times. Move design to left and down.
Embroider. Press carriage return key after finishing last section to return carriage to stored position.
Trim sample, then mount it on the following page.
artista
630E & 640E
The artista 630E & 640E rotate designs in clockwise & counterclockwise increments of 1º.
Select motif; it opens in Edit 1.
Select Large Oval hoop. Select
Edit 2; move design to upper right corner of hoop.
Go to Edit 1 > Add Motif. Select same motif again. Go to Edit 2; select Rotation icon; rotate design 22º. Move motif up and slightly to the left.
Continue adding motifs, rotating to 45º, 70º, and 90º. Using the
Retrieve function, arrange as shown. Touch OK.
Embroider and trim sample, then mount it on the following page.
aurora
430E & 440QEE
Editor Lite software provides quick & easy rotation by 45º increments, free rotation by clicking & dragging, and by specifying degree of rotation in the
Object Projecties box.
Select motif; copy; paste. Right click to open new design’s Object Properties > General. Type 22 in Rotation field; click OK. Move design up and to the right.
Click Paste; while selected, rotate design 45º by left clicking Rotate
CCW/CW icon. Move up & to right.
Click Paste; right click to open
Object Properties > General. Type 77 in Rotation field; OK. Move up and to the right.
Paste again; left click 2x on Rotate
CCW/CW icon. Move up & to right.
Save As
rotation exercise. Send to machine. Stitch, trim, mount.
artista 730E
The artista 730E rotates designs in clockwise and counterclockwise increments of 1º.
Select motif. Select Edit 2. Using
Stitch Length and Width knobs, move design to upper right corner.
Go to Edit 1. With motif selected, touch Duplicate. Select Edit 2.
Rotate 22º, then move up & slightly to right.
Continue to duplicate and rotate motifs to 45º, 77º, and 90º. Using
Retrieve function, arrange as shown. Touch OK.
Embroider and trim sample, then mount it on the following page.
Notes
Note: Editor Lite software provides
quick and easy rotation – 45°
increments by clicking on Rotate
CCW/CW icon, free rotation by clicking and dragging, and by a specific degreesof rotation in the
Object Properties box.
Embroidery Motif
deco
330
#35 - floral border
aurora
430E & 440QEE
My Designs >
BlackBorder2.art
artista
630E & 640E
630E: #21 - floral
640E: #27 - floral
artista
730E
#14 - little wild rose
Fabric & Stabilizer
8” x 10” rectangle
M
ASTERING
Y
OUR
BERNINA ® E
MBROIDERY
M
ODULE
/M
ACHINE
2/06
©2006 BERNINA ® of America, Inc. Permission to copy granted only to Authorized BERNINA ® Dealers
30
BERNINA
®
Embroidery Module/Machine
Rotating Designs Sample
Mastering
Your
BERNINA
®
deco 330
aurora 430E & 440QEE
artista 630E & 640E
artista 730E
M
ASTERING
Y
OUR
BERNINA ® E
MBROIDERY
M
ODULE
/M
ACHINE
2/06
©2006 BERNINA ® of America, Inc. Permission to copy granted only to Authorized BERNINA ® Dealers
31
advertisement
Related manuals
advertisement