- Computers & electronics
- Telecom & navigation
- Navigators
- Sony
- GPS-CS3KA - GPS Digital Imaging
- Operating instructions
Formatting the internal memory. Sony GPS-CS3KA, GPS-CS3KA - GPS Digital Imaging
Add to my manuals
88 Pages
advertisement
▼
Scroll to page 2
of 88
Formatting the internal memory
The GPS unit can record multiple GPS logs totaling up to about 360 hours. (Recording duration differs depending on the condition under which you are using the GPS unit.)
When the internal memory is full, the following message appears.
You can format the internal memory using the menu. When formatted, all data in the internal memory is cleared, and cannot be recovered. It takes about 15 seconds for formatting.
1
Press MENU during triangulation.
2
Press V/v to select [Tools], and press ENTER.
3
Press V/v to select [Int Memory Format], and press ENTER.
4
Press V/v to select [OK], and press ENTER.
5
When [Complete] appears, press ENTER.
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 GB
- 4 Table of contents
- 5 Read this first
- 5 What you can do with the GPS unit kit
- 6 Displaying images where they were taken and the route you traveled on a map
- 8 Checking the included items
- 9 Identifying the parts
- 11 Menu screen
- 14 Step 1 Recording the traveled route
- 14 Inserting a battery
- 16 Recording a GPS log
- 19 Formatting the internal memory
- 20 Step 2 Applying the recording positioning information to images
- 20 Installing the supplied software
- 22 Applying positioning information to images with the GPS unit (Matching)
- 26 Applying positioning information to the images on a computer/Importing the GPS log
- 30 Step 3 Displaying the image on a map
- 30 Viewing the image and the location where you recorded an image on a map/Viewing the route you traveled
- 32 Troubleshooting
- 32 Troubleshooting
- 34 Error messages
- 36 Additional information
- 36 GPS
- 37 Precautions
- 41 Specifications
- 45 FR
- 46 Table des matières
- 47 A lire en premier
- 47 Ce que vous pouvez faire avec le kit GPS
- 48 Affichage des images à l'endroit de la prise de vue et de l'itinéraire parcouru sur la carte
- 50 Vérification des articles inclus
- 51 Identification des pièces
- 53 Écran du menu
- 56 Étape 1 Enregistrement de l'itinéraire parcouru
- 56 Insertion d'une batterie
- 58 Enregistrement d'un journal GPS
- 61 Formatage de la mémoire interne
- 62 Étape 2 Application des informations de positionnement enregistrées aux images
- 62 Installation du logiciel fourni
- 64 Application des informations de positionnement aux images à l'aide de l'unité GPS (Matching)
- 68 Application des informations de positionnement aux images d'un ordinateur/ Importation du journal GPS
- 72 Étape 3 Affichage d'image sur une carte
- 72 Affichage de l'image et du lieu de la prise de vue sur une carte/Affichage de l'itinéraire parcouru
- 74 Dépannage
- 74 Dépannage
- 76 Messages d'erreur
- 78 Informations complémentaires
- 78 GPS
- 79 Précautions
- 83 Spécifications