OWNER`S MANUAL 2013 125 Duke EU 200 Duke EU 200 Duke MAL

14 ELECTRICAL SYSTEM

Fuse (75011088030) ( p. 164)

Tip

Replace the spare fuse in the fuse box so that it is available if needed.

– Check that the power consumer is functioning properly.

– Close the fuse box cover.

Finishing work

– Mount the passenger seat. ( p. 79)

14.6

Changing the headlight bulb

Note

Damage to reflector Reduced brightness.

– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before mounting.

120

Preparatory work

– Switch off all power consumers and switch off the engine.

Main work

– Remove expanding rivets

1

.

601915-10

14 ELECTRICAL SYSTEM

– Remove screws

2

.

– Lift the headlight mask slightly and swing forward.

601914-10

– Take off protection cap

3

.

– Disconnect plug-in connector

4

.

B00760-10

– Detach retaining clamp

5

.

– Remove headlight bulb

6

.

– Position the new headlight bulb in the headlight housing.

Headlight (H4/socket P43t) ( p. 164)

Info

Insert the headlight bulb so that the catches latch into the recesses.

B00761-10

121

14 ELECTRICAL SYSTEM

– Attach retaining clamp

5

.

– Connect plug-in connection

4

.

– Mount protection cap

3

.

B00760-10

– Fold the headlight mask up.

– Mount and tighten screws

2

.

Guideline

Screw, headlight mask

601914-10

M6 11 Nm (8.1 lbf ft)

122