advertisement
4 MODE ADMINISTRATION
MELSOFT
4.4 Mode Transition
At the starting time, the lock mode is used.
The operation for exiting the monitor tool can be executed by a user who has the authority only.
Lock mode
Starting
Operator mode
<User authority>
Operator1 to 4
*1
Change mode
Engineer mode
<User authority>
Engineer
4
Only a user who has the authority
Exit
*1: The display is switched in accordance with status of operator1 to 4.
4.5 Mode Change
POINT
Specify the authority for operator1 to 4 on User Authority Setting (
9.2), and set the authority specified for user name with User Setting
Section
( Section 4.6, Section 9.3) to change the operation range for each operator.
The operation authority for operator1 to 4 after installation is the initial setting status ( Section 9.2).
The mode can be changed by specifying a user name and a password registered with the Change Mode function beforehand.
(
User name, its corresponding authority and password are registered by user settings.
Section 4.6, Section 9.3)
1.
Click the "Change Mode" button on the monitor toolbar.
2.
One of the following two operations can be executed in the "Change Mode" dialog box.
(In the setting operator/engineer mode)
Input character string to user name and password item.
Click the "OK" button.
(Return to lock mode)
Click the "Lock" button.
POINT
The security level of GT SoftGOT can be changed in accordance with the user authority which changes the mode by setting the security level change on Usercreated Screen Setting. For details, refer to Section 9.11.
4-2 4-2
advertisement
Related manuals
advertisement