advertisement
10 FACEPLATE
MELSOFT
10.4 Tag Types
Loop tag
Status tag
Alarm tag
Message tag
PID
PIDP
SPI
IPD
BPI
R
ONF2
ONF3
PFC_SF
PFC_SS
The types of tag that can be displayed in a faceplate are listed in the following table.
As for the contents displayed in the faceplate of each tag, please refer to the sections in "Reference".
Name
PGS
PGS2
MOUT
MONI
SWM
MWM
SEL
BC
PSUM
PVAL
HTCL
NREV
REV
MVAL1
MVAL2
PB
TIMER1
TIMER2
COUNT1
COUNT2
ALM
ALM_64PT
MSG
MSG_64PT
PID control
Position type PID control
Sample PI control
I-PD control
Blend PI control
Ratio control
2 position ON/OFF control
3 position ON/OFF control
Predictive functional control (simple first order lag)
Predictive functional control (simple second order lag) functional (integral process)
Program setter
Multi-point program setter
Manual output
Monitor
Manual setter with monitor
Manual output with monitor
Loop selector
Batch counter
Pulse integrator
Position-proportional output
Heating and cooling output
Motor Irreversible Control
Motor reversible Control
ON/OFF control 1 (without intermediate value)
ON/OFF control 2 (with intermediate value)
Push button operation
Timer1 (Timer stops when COMPLETE flag is on.)
Timer2 (Timer continues when COMPLETE flag is on.)
Count1 (Counter stops when COMPLETE flag is on.)
Count2 (Counter continues when COMPLETE flag is on.)
Alarm
64-points alarm
Message
64-points message
Reference
Section 10.5.1
Section 10.5.1
Section 10.5.2
Section 10.5.1
Section 10.5.1
Section 10.5.1
Section 10.5.1
Section 10.5.1
Section 10.5.3
Section 10.5.3
Section 10.5.12
Section 10.5.12
Section 10.5.12
Section 10.5.4
Section 10.5.5
Section 10.5.6
Section 10.5.7
Section 10.5.8
Section 10.5.9
Section 10.5.10
Section 10.5.11
Section 10.5.11
Section 10.5.13
Section 10.5.14
Section 10.6.1
Section 10.6.1
Section 10.6.1
Section 10.6.1
Section 10.6.3
Section 10.6.2
Section 10.6.2
Section 10.6.2
Section 10.6.2
Section 10.7.1
Section 10.7.2
Section 10.8.1
Section 10.8.2
10-31 10-31
10 FACEPLATE
MELSOFT
These items in the following table are the example items of "Section 10.3 Displaying
Parts on Faceplate" displayed in the faceplate of each tag type. As for the display contents and operations of the corresponding item in the following explanations of each faceplate display, refer to sections in "Reference".
Part
Reference
Loop
PID
2PID
2PIDH
PIDP
SPI
IPD
BPI
R
ONF2
ONF3
PFC_SF
PFC_SS
PFC_INT
PGS
PGS2
I/O
Mode
Control mode
Motion type
STC setting
Section
10.3.2
Section
10.3.3
Section
10.3.4
Section
10.3.5
Time in the step setting
Section
10.3.6
PV value setting
Section
10.3.7
SV value setting
MV value setting
Section
10.3.8
Section
10.3.9
Count setting
BC operation
C/T operation
Section
10.3.10
Section
10.3.11
Section
10.3.12
STATUS operation
Command button operation
Section
10.3.13
Section
10.3.14
----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
( )
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
( )
( )
( )
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ---- ----
Tag type
Status
MOUT
MONI
SWM
MWM
SEL
BC
PSUM
PVAL
HTCL
NREV
REV
MVAL1
MVAL2
PB
TIMER1
---- ---- ---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ---- ---- ----
---- ---- ----
---- ---- ---- ----
---- ---- ---- ---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ( )
---- ---- ---- ---- ---- ( )
---- ---- ---- ---- ---- ( )
---- ---- ----
---- ---- ---- ---- ---- ----
---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ---- ---- ----
---- ---- ---- ---- ---- ---- ---- ---- ----
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
----
---- ---- ---- ---- ---- ---- ---- ---- ----
---- ---- ---- ---- ---- ---- ---- ---- ----
----
----
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
---- ---- ---- ---- ---- ( ) ---- ---- ---- ---- ----
TIMER2
---- ---- ---- ---- ---- ( ) ---- ---- ---- ---- ----
Alarm
COUNT1
---- ---- ---- ---- ---- ( ) ---- ---- ---- ---- ----
COUNT2
ALM
---- ---- ---- ---- ---- ( ) ---- ---- ---- ---- ----
---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
ALM_64PT
---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
Mess-
MSG
---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- age MSG_64PT ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
: Display corresponding to faceplate, ( ): Only display a part of common pattern, : No display
REMARK
In SV value of R, bar is display by ratio to PV value.
In MV value setting of ONF2 and ONF3, bar is not displayed and the MV value setting button can only be set as 2 position (0%, 100%) or 3 position (0%, 50%,
100%)
In SV value setting of PGS, bar is not displayed, display SV pointer on the pattern graph ( Section 10.3.1).
10-32 10-32
advertisement
Related manuals
advertisement