- No category
advertisement
Table of Contents
3.2.2 Erase the results saved on the luminometer........................................... 15
3.3.2 Set the waiting time and measuring time ................................................ 18
Section 4 Chemiluminescence Toxicity Test...................................................... 23
4.2 Prepare the reagents for luminometer calibration and sample testing.............. 23
5.1 EZ Arsenic, 0–500 ppb (0, 10, 25, 50, 100, 250, 500) ...................................... 33
5.2 EZ Arsenic, 0–4000 ppb (0, 35, 75, 175, 1500, 4000) ..................................... 34
EcloxTOC.fm
Table of Contents
Page 3
Table of Contents
Section 11 Luminescent Bacteria Toxicity Test:
11.6 Prepare the stock suspension using the LCK491 reagent...............................51
11.13.1 Description of screening luminescence results....................................65
11.13.2 Description of LIMIT measure results ..................................................66
11.13.3 Show or send screening luminescence results....................................66
11.13.4 Show or send LIMIT measure results ..................................................67
Section 12 Luminescent Bacteria Toxicity Test
Table of Contents
Page 4
EcloxTOC.fm
Table of Contents
12.3 Thermostat and PC software requirements .................................................... 72
12.6.1 Prepare the stock suspension using the LCK491 reagent.................... 75
12.10.1 Prepare a 9 dilution series (D 2 values and higher)............................ 85
12.10.2 Prepare a 3 dilution series (D 2 values and higher)............................ 89
12.10.3 Prepare a 9 dilution series (D 1 values and higher)............................ 93
12.10.4 Prepare a 3 dilutions series (D 1 values and higher) .......................... 98
12.11 Measure the light intensity of the test suspension....................................... 101
13.3.1 Luminometer battery replacement ...................................................... 112
13.3.2 Pocket Pal™ battery replacement (pH and TDS) ............................... 112
Section 15 Replacement parts and accessories .............................................. 117
EcloxTOC.fm
Table of Contents
Page 5
Table of Contents
Table of Contents
Page 6
EcloxTOC.fm
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Table of Contents
- 7 Section 1 Specifications
- 9 Section 2 General information
- 9 2.1 Safety information
- 9 2.1.1 Use of hazard information
- 10 2.2 Product overview
- 10 2.2.1 Test descriptions
- 12 2.2.2 Test setup
- 12 2.3 Unpack the instrument
- 13 Section 3 Luminometer
- 13 3.1 Overview
- 14 3.2 Prepare the luminometer for use
- 14 3.2.1 Test the operation
- 15 3.2.2 Erase the results saved on the luminometer
- 16 3.2.3 Set the measurement range
- 18 3.3 Change the default settings
- 18 3.3.1 Set the LCD contrast
- 18 3.3.2 Set the waiting time and measuring time
- 19 3.4 Connect the luminometer to a printer
- 21 3.5 Connect the luminometer to a computer
- 21 3.6 Install LUMISsoft on the computer
- 23 Section 4 Chemiluminescence Toxicity Test
- 23 4.1 Overview
- 23 4.2 Prepare the reagents for luminometer calibration and sample testing
- 24 4.2.1 Prepare CT Reagent 2
- 24 4.2.2 Prepare CT Reagent 3
- 26 4.3 Calibrate the luminometer
- 28 4.4 Measure pollutants in the water sample
- 31 4.5 Show the previous results
- 31 4.6 Send previous results to a computer
- 33 Section 5 EZ Arsenic Test Kit
- 33 5.1 EZ Arsenic, 0–500 ppb (0, 10, 25, 50, 100, 250, 500)
- 34 5.2 EZ Arsenic, 0–4000 ppb (0, 35, 75, 175, 1500, 4000)
- 34 5.3 Interferences
- 35 5.3.1 Removing sulfide (optional)
- 37 Section 6 Pesticide/Nerve Agent Test
- 37 6.1 Pesticide/Nerve Agent procedure
- 39 Section 7 Free and Total Chlorine Test
- 39 7.1 Measuring hints and general information
- 39 7.2 Free chlorine procedure, 0–3.5 mg/L
- 41 7.3 Total chlorine procedure, 0–3.5 mg/L
- 43 Section 8 Color Test
- 43 8.1 Color Test, low range
- 44 8.2 Color Test, high range
- 45 Section 9 Pocket Pal™ pH Tester
- 45 9.1 Use and care of the tester
- 46 9.2 2-point calibration
- 47 Section 10 Pocket Pal™ TDS Tester
- 47 10.1 Use and care of the tester
- 48 10.2 Calibration
- 49 Section 11 Luminescent Bacteria Toxicity Test: Screening and LIMIT measure
- 49 11.1 Overview
- 50 11.2 Accuracy
- 50 11.3 Reagent description
- 50 11.3.1 Quality assurance test
- 51 11.4 Reagent storage and preservation
- 51 11.5 Prepare the reagent
- 51 11.6 Prepare the stock suspension using the LCK491 reagent
- 54 11.7 Prepare the test suspension
- 55 11.8 Sample collection, storage and preservation
- 55 11.9 Interferences
- 56 11.10 Prepare the sample
- 57 11.11 Prepare the test tubes
- 60 11.12 Measure the toxicity of the sample dilutions
- 65 11.13 Show or send previous results
- 65 11.13.1 Description of screening luminescence results
- 66 11.13.2 Description of LIMIT measure results
- 66 11.13.3 Show or send screening luminescence results
- 67 11.13.4 Show or send LIMIT measure results
- 69 Section 12 Luminescent Bacteria Toxicity Test according to ISO 11348 part 3
- 70 12.1 Overview
- 71 12.2 Accuracy
- 72 12.3 Thermostat and PC software requirements
- 73 12.4 Reagent description
- 74 12.5 Reagent storage and preservation
- 75 12.6 Prepare the reagent
- 75 12.6.1 Prepare the stock suspension using the LCK491 reagent
- 76 12.6.2 Prepare the test suspension
- 82 12.7 Sample collection, storage and preservation
- 83 12.8 Interferences
- 84 12.9 Prepare the sample
- 85 12.10 Prepare the dilutions series
- 85 12.10.1 Prepare a 9 dilution series (D 2 values and higher)
- 89 12.10.2 Prepare a 3 dilution series (D 2 values and higher)
- 93 12.10.3 Prepare a 9 dilution series (D 1 values and higher)
- 98 12.10.4 Prepare a 3 dilutions series (D 1 values and higher)
- 101 12.11 Measure the light intensity of the test suspension
- 106 12.12 Measure the light intensity of the test suspension after the sample dilutions are added
- 108 12.13 Show or send previous results
- 111 Section 13 Maintenance
- 111 13.1 General maintenance
- 111 13.1.1 Cleaning the kit
- 111 13.1.2 Cleaning the luminometer
- 111 13.2 Decontamination
- 112 13.3 Battery replacement
- 112 13.3.1 Luminometer battery replacement
- 112 13.3.2 Pocket Pal™ battery replacement (pH and TDS)
- 115 Section 14 Troubleshooting
- 117 Section 15 Replacement parts and accessories
- 125 Appendix A Luminescent bacteria risks
- 125 A.1 Risk specifications
- 126 A.2 Biosafety Level 1 information
- 126 A.3 Disposal