Add rinse aid reminder. Miele G 6572 SCVi

Miele G 6572 SCVi is a user-friendly dishwasher that can automate the washing process thanks to 3D cutlery tray, FlexiTimer, and EcoFeedback. Apart from that, it offers a range of washing programs to clean different types of loads, all energy-efficient thanks to EcoStart. Guided by reminders for salt and rinse aid, you can keep your dishwasher in optimal condition. Ranging from 45 to 75 °C, temperatures provide multiple options for caring for different types of dishes, and the half load function is suited to smaller loads.

Before using for the first time

 Add rinse aid only until it is visible in the opening.

The rinse aid reservoir holds ap‐ prox. 110 ml.

 Close the flap firmly so that it clicks into place. Otherwise water can enter the rinse aid reservoir during a pro‐ gramme.

 Wipe up any spilled rinse aid. This prevents over-foaming occurring dur‐ ing the next programme.

You can adjust the rinse aid dosage for best results (see "Settings menu,

Rinse aid").

Add rinse aid reminder

When the 

Add rinse aid

message ap‐ pears, the reservoir contains sufficient rinse aid for 2 - 3 programmes only.

 Add rinse aid in plenty of time.

 Confirm with OK.

The refill reminder will go out.

If you only ever use combination prod‐ ucts containing salt and rinse aid in your dishwasher, you can switch both reminders off if you wish (see "Set‐ tings menu - Refill reminders").

If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to add salt and rinse aid and to switch the re‐ minders back on.