DMS Go Operator&#39

Chapter 2. Instrument Setup

2.2 The Menu System (cont.)

2.3 Initial Setup

In this section, you’ll learn how to configure the DMS Go display and operating features. Follow these procedures to turn the instrument

ON and make initial adjustments to the control settings. Because the instrument can be set to save the control settings when it is turned

OFF and restore them when it is turned back

ON, you won’t have to repeat these adjustments unless a change is required.

When you power the instrument

ON, the Main Menu is automatically activated.

Note: For most menus, you can press the F1 key to return HOME to the Main Menu or exit a particular function.

24 DMS Go Operator’s Manual