Channel Vision 6204 Instruction manual
Channel Vision 6404 is a high-resolution mini pinhole camera suitable for hidden and inconspicuous CCTV installations. With 560 TV lines of resolution and a 5.5mm lens for tight viewing angles, it delivers excellent image quality. Its WDR (Wide Dynamic Range) capability ensures clear images even in challenging lighting conditions. The camera is equipped with a 1/3” SONY Super HAD CCD sensor, providing superior low-light performance with a minimum illumination of 0.1 Lux.
Advertisement
Advertisement
6404
Color Hi-res WDR Mini Camera
6204-xxx
Single Gang Color Hi-res WDR Mini Camera
1 0
The 6404 is a high-resolution mini pinhole camera. Its extremely small size and cone-shaped lens make it ideal for hidden and inconspicuous CCTV installations. Typical applications include door stations, small flush-mount camera assemblies, and hidden camera installations.
Features: h High quality 1/3” SONY Super HAD CCD sensor II h 560 TV lines of resolution h 5.5mm lens for tight viewing angles h WDR
6404 Mini Pinhole Camera Includes
Camera Cable
Camera
Small Screws
Mount
Power Supply
Dimensions
18.1
14
31
30
30
Yellow (Video)
Black (GND)
Red (12VDC)
6404
Model 6404/6204-xxx
Video
(BNC Connector)
Coax extension
(not included)
Power
2-Conductor power
supply extension
(not included)
To Monitor
or
Video distribution
Crimp-on splice
connectors
(not included)
Power supply
(included)
Installation: h Attach the camera mount to a flat surface using the mounting hole shown above.
h Drill a hole in the wall, ceiling, or use the hole in the 6204-xxx bracket for wiring (see diagram).
h If necessary, attach the camera’s video output to a coax extension that is long enough to reach your monitor or video distribution equipment.
h If necessary, cut the connector off of the end of the power supply and splice in an extension using crimp-on connectors.
6404 is also used in the 6204-xxx single gang color camera assembly.
6404
6204-xxx assembly
3
*Specifications:
Image Sensor:
Scanning Frequency:
Resolution:
Total Pixels:
Effective Pixels:
S/N:
Min. Illumination:
Sync System:
Gamma:
Video Output:
Lens:
Electronic Shutter:
WDR:
AGC
Day & Night:
Motion Detection:
Privacy Masking:
Languages:
OSD:
White Balance:
3D-DNR
Digital Zoom:
Digital Effect
1/3” SONY Super HAD CCD
NTSC 15.734KHz (H) 59.94Hz(V)
560 TV Lines
NTSC 811 (H) x 508 (V)
NTSC 768 (H) x 494 (V)
More than 52dB
0.1 [email protected] (0.0002 Lux)
Internal
Y=0.45
1,0 Vpp Composite (75 Ohms)
5.5mm P4
NTSC: 1/60 - 1/120,000 sec
Yes
Off, On (Low, Middle, High)
Auto, Color, BW selectable
Off, On (Area select)
Off, On (192 zone selection)
English, Chinese
Yes
AWB, ATW, AWC-Push, manual
0-6 Setting x1 - x10
Off, V-Flip, Mirror
Operating Temperature:
Humidity:
Power Consumption:
14° - 122° F
Less than 80%
12vDC Max 100mA
Dimensions:
Weight:
0.98" x 0.98”
Approximately 72g
*Specifications subject to change without notice
1
Channel Vision Technology will repair or replace any defect in material or workmanship which occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for one year from the date of original purchase. This is a no hassle warranty with no mail in warranty card needed. This warranty does not cover damages in shipment, failures caused by other products not supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of the equipment. This warranty is extended only to the original purchaser, and a purchase receipt, invoice, or other proof of original purchase date will be required before warranty repairs are provided.
Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free. A Return
Authorization number must be obtained in advance and can be marked on the outside of the shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to state). If a problem with this product develops during or after the warranty period, please contact Channel Vision
Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life sustaining or critical environment applications. Channel Vision customers using or selling Channel Vision products for use in such applications do so at their own risk and agree to fully indemnify Channel Vision for any damages resulting from such improper use or sale.
w w w . c h a n n e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax email: [email protected]
500-266 rev C

Public link updated
The public link to your chat has been updated.
Advertisement