Channel Vision 6200 Instruction Manual

6200-xxx
Flush Mount Single Gang Box Color Camera
10
Model 6200-xxx
The 6200 series color flush mount single gang box cameras are
the perfect solution for surveillance applications where discreet
style is required. Finished with a smoked acrylic facing and choice
of seven different decorative colors, the box blends easily into any
installation background. The compact camera is housed behind the
acrylic facing and features a 1/3” Sony Super HAD CCTV sensor,
550 lines of resolution and a 5.5mm lens for tight viewing angles.
The 6200-Series is weather resistant and suitable for either indoor
or outdoor use.
Features:
h High quality 1/3” SONY Super HAD CCD sensor
h 550 TV lines of resolution
h 5.5mm lens for tight viewing angles
h Easy to install in a single gang box
h Decorative Colors Available
White (212), Polished Brass (222), Antique Brass (232), Chrome
(242), Oil Rubbed Bronze (252), Black (282), Satin Nickel (302)
Camera
Camera Cable
Small Screws
Mount
Power Supply
18.1
31
14
30
30
2
Yellow (Video)
Black (GND)
Red (12VDC)
Dimensions
Model 6200-xxx
Video
(BNC Connector)
Coax extension
(not included)
6200
Power
2-Conductor power
supply extension
(not included)
Crimp-on splice
connectors
(not included)
To Monitor
or
Video distribution
Power supply
(included)
Installation:
h Attach the camera mount to the bracket supplied with this product
h Apply double sided gasket between plexiglass and outer plate
h If necessary, attach the camera’s video output to a coax extension
that is long enough to reach your monitor or video distribution
equipment.
Gasket
Plexiglass
Gasket
Outer Plate
h If necessary, cut the connector off of the end of the power supply and
splice in an extension using crimp-on connectors.
6403
6200-xxx assembly
3
*Specifications:
Image Sensor:
Picture Elements:
Resolution:
S/N Ratio:
Min Illumination:
Electronic Shutter:
Iris Control:
White Balance:
Gamma Characteristic:
Lens Focal Length:
Sync. System:
Power Requirements:
Power Consumption:
Video Output:
Dimensions:
only
Operating Temp:
1/3” SONY Super HAD CCD
NTSC: 768x494
550 lines
More than 48 dB
0.2 LUX @ F2.0
1/60s - 1/100,000s
Automatic
Automatic
0.45
5.5mm
Internal
12VDC
65mA
1 Vp-p @ 75 ohms
1.18” x 1.18” x 0.55” (30 x 30 x 18mm), camera
-10°C to 50°C (14°F to 122°F)
*Specifications subject to change without notice.
1
Channel Vision Technology will repair or replace any defect in material or workmanship which
occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty with no mail in warranty card
needed. This warranty does not cover damages in shipment, failures caused by other products not
supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of
the equipment. This warranty is extended only to the original purchaser, and a purchase receipt,
invoice, or other proof of original purchase date will be required before warranty repairs are
provided.
Mail in service can be obtained during the warranty period by calling (800) 840-0288 toll free.
A Return Authorization number must be obtained in advance and can be marked on the outside of the
shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to
state). If a problem with this product develops during or after the warranty period, please contact
Channel Vision Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life sustaining or critical
environment applications. Channel Vision customers using or selling Channel Vision products for
use in such applications do so at their own risk and agree to fully indemnify Channel Vision for any
damages resulting from such improper use or sale.
www.channelvision.com
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: [email protected]
500-308 rev B