PC9155 Wireless Alarm System
Enrolling Sensors & Pendants
Step
1
Enter [*][8][5555][898]
âWireless Enrollment Modeâ is displayed.
Step
2
⢠Place the Wireless device near the alarm system.
⢠Activate the device as described in the associated installation sheet.
⢠The Electronic Serial Number (ESN) is displayed.
⢠Press , to confirm serial number.
Wireless
Enrollment Mode
223E02
Confirm ESN?
*
The ESN is a 6-digit alphanumeric number located on a removable sticker on the wireless device.
⢠If the serial number is incorrect, press
Step
3
After successful confirmation of the serial number, the system prompts for the zone #.
The next available zone is displayed.
⢠Press , to accept the selection or enter a zone number (01 to 32).
For the first enrolled device enter
i
Step
4
Step
5
and repeat this step.
.
If a second device is enrolled in a zone that already has a device enrolled,
the system offers the choice of overwriting the existing device.
⢠Press , to overwrite the zone.
⢠Press
to re-enter the zone number (previous display).
After successful entry of the zone number, the system prompts for the zone type. (The
recommended zone type is displayed). Press , to accept the zone type or:
⢠Enter
for: Delay Type 1 - Entry/Exit Point e.g., door.
⢠Enter
for: Instant Type - e.g., window.
⢠Enter
for: Interior Stay/Away Type - e.g., motion detector.
⢠Enter
for: Delayed 24 Hr. Fire Type - e.g., smoke detector.
⢠Enter
for: 24 Hr. Panic - e.g., panic pendant.
After successful entry of the zone type:
The alarm system returns to the Wireless Enrollment screen. Continue with one of the
following:
⢠Activate another sensor or pendant to continue enrollment (Step 2).
⢠Press
to enter another programming section.
⢠Press
Enter Zone #
00
Zone 01: 224A01
Overwrite?
*
Press (*) or
Zone Type: 03
Wireless
Enrollment Mode
to exit Installer Programming.
Enrolling Proximity Tags
If this function is available on the keypad, the [ ][5] menu provides the option to assign a proximity tag to an access code once the
access code has been entered. Swipe the tag to enroll it during user access code assignment.
i
To unenroll a proximity tag, the user code must be deleted. To retain the user code it must be reentered.
2-6
">
