STB20NM60-1 - STP20NM60FP
STB20NM60 - STP20NM60 - STW20NM60
N-channel 600V - 0.25
Ω - 20A - TO-247 - TO-220/FP - D
2
/I
2
PAK
MDmesh™ Power MOSFET
Features
Type
STP20NM60
STP20NM60FP
STB20NM60
STB20NM60-1
STW20NM60
V
DSS
600V
600V
600V
600V
600V
R
DS(on)
< 0.29
Ω
< 0.29
Ω
< 0.29
Ω
< 0.29
Ω
< 0.29
Ω
■
■
■
■
High dv/dt and avalanche capabilities
100% avalanche tested
Low input capacitance and gate charge
Low gate input resistance
I
D
20A
20A
20A
20A
20A
Applications
■
Switching applications
Description
The MDmesh™ is a new revolutionary Power
MOSFET technology that associates the multiple drain process with the company’s PowerMESH™ horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the company’s proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition’s products.
Table 1.
Device summary
Part number
STP20NM60
STP20NM60FP
STB20NM60T4
STB20NM60-1
STW20NM60
Marking
P20NM60
P20NM60FP
B20NM60
B20NM60-1
W20NM60
1
D²PAK
3
TO-220
1
2
3
Figure 1.
Internal schematic diagram
Package
TO-220
TO-220FP
D²PAK
I²PAK
TO-247
1
2
3
TO-220FP
TO-247
I²PAK
1
2
3
Packaging
Tube
Tube
Tape & reel
Tube
Tube
August 2007 Rev 12 1/18
www.st.com
18
5
6
3
4
1
2
Contents
Contents
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol Parameter
V
DS
V
GS
I
D
I
D
I
DM
(2)
P
TOT
Drain-source voltage (V
Gate- source voltage
GS
= 0)
Drain current (continuous) at T
C
Drain current (continuous) at T
C
Drain current (pulsed)
= 25°C
= 100°C
Total dissipation at T
C
= 25°C
Derating factor dv/dt
(3)
Peak diode recovery voltage slope
V
ISO
Insulation withstand voltage (RMS) from all three leads to external heat sink
(t=1s;T
C
=25°C)
Storage temperature T stg
T j
Max. operating junction temperature
1.
Limited only by maximum temperature allowed
2.
Pulse width limited by safe operating area
3.
I
SD
< 20A, di/dt < 400A/µs, V
DD
< V
(BR)/DSS
, Tj < T
JMAX
TO-220/D²PAK
I²PAK/TO-247
600
±30
20
12.6
80
192
1.5
15
TO-220FP
20
(1)
12.6
(1)
80
(1)
45
0.36
--
-65 to 150
150
2500
Unit
V
V
A
A
A
W
W/°C
V/ns
V
°C
°C
Table 3.
Symbol
Thermal resistance
Parameter
Rthj-case Thermal resistance junction-case max
T l
Maximum lead temperature for soldering purpose
TO-220/D²PAK
I²PAK/TO-247
0.65
62.5
TO-220FP
2.8
300
Unit
°C/W
°C/W
°C
Table 4.
Symbol
I
AS
E
AS
Avalanche data
Parameter
Avalanche current, repetitive or notrepetitive (pulse width limited by T j
max)
Single pulse avalanche energy
(starting T j
= 25 °C, I
D
= I
AS
, V
DD
= 50 V)
Max. value
10
650
Unit
A mJ
3/18
Electrical characteristics STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
(T
CASE
=25°C unless otherwise specified)
Table 5.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
V
I
I
DSS
GSS
GS(th)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
R
DS(on)
Static drain-source on resistance
Test conditions Min.
I
D
= 250 µA, V
GS
= 0
V
DS
= Max rating
V
DS
= Max rating,@125°C
V
GS
= ± 30V
V
DS
= V
GS
, I
D
= 250 µA
V
GS
= 10V, I
D
= 10 A
600
3
Typ.
Max.
Unit
4
0.25
1
10
±100
5
0.29
nA
V
Ω
V
µA
µA
Table 6.
Symbol
Dynamic
Parameter Test conditions Min.
Typ.
Max.
Unit
g fs
C
C
C
(1) iss oss rss
Forward transconductance
V
DS
> I
D(on)
x R
DS(on)max,
I
D
= 10 A
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
DS
GS
= 25V, f = 1 MHz,
= 0
11
1500
350
35
S pF pF pF
C oss eq.
(2)
Q g
Q gs
Q
R gd g
Equivalent output capacitance
Total gate charge
Gate-source charge
Gate-drain charge
Gate input resistance
V
GS
= 0V, V
DS
= 0V to
480 V
V
DD
= 480 V, I
D
= 20 A,
V
GS
= 10V
(see Figure 16)
f = 1 MHz Gate DC bias=0 Test signal level = 20 mV open drain
215
39
10
20
1.6
54 pF nC nC nC
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
2.
C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss increases from 0 to 80% V
DSS
.
when V
DS
Ω
4/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Electrical characteristics
Table 7.
Symbol
t d(on) t r t d(off) t f
Switching times
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Test conditions
V
DD
= 300 V, I
D
= 10 A
R
G
= 4.7
Ω V
GS
= 10 V
(see Figure 15)
Min.
Typ.
Max.
Unit
25
20
42
11 ns ns ns ns
Table 8.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SDM
(1)
V
SD
(2) t rr
Q rr
I
RRM
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 20 A, V
GS
= 0
I
SD
=20A, di/dt=100A/µs,
V
DD
= 60 V
(see Figure 20)
t rr
Q rr
I
RRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
T
=20A, di/dt=100A/µs, j
= 150°C, V
DD
= 60 V
(see Figure 20)
1.
Pulse width limited by safe operating area
2.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
Min Typ.
Max Unit
20
80
1.5
390
5
25
510
6.5
26 ns
µC
A ns
µC
A
A
A
V
5/18
Electrical characteristics STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Figure 2.
Safe operating area for TO-220 /
D²PAK / I²PAK
Figure 3.
Thermal impedance for TO-220 /
D²PAK / I²PAK
Figure 4.
Safe operating area for TO-220FP Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Output characterisics Figure 7.
Transfer characteristics
6/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Figure 8.
Transconductance Figure 9.
Electrical characteristics
Static drain-source on resistance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage vs temperature
Figure 13. Normalized on resistance vs temperature
7/18
Electrical characteristics STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Figure 14. Source-drain diode forward characteristics
8/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
3 Test circuit
Figure 15. Switching times test circuit for resistive load
Figure 16. Gate charge test circuit
Test circuit
Figure 17. Test circuit for inductive load switching and diode recovery times
Figure 18. Unclamped inductive load test circuit
Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform
9/18
Package mechanical data
4
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at:
www.st.com
10/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Package mechanical data
DIM.
L1
L2
øP
E e
L
øR
S b2 c
D
A
A1 b b1
MIN.
4.85
2.20
1.0
2.0
3.0
0.40
19.85
15.45
14.20
3.70
3.55
4.50
TO-247 MECHANICAL DATA
mm.
TYP
5.45
18.50
MAX.
5.15
2.60
1.40
2.40
3.40
0.80
20.15
15.75
14.80
4.30
3.65
5.50
MIN.
0.19
0.086
0.039
0.079
0.118
0.015
0.781
0.608
0.560
0.14
0.140
0.177
5.50
inch
TYP.
0.214
0.728
0.216
MAX.
0.20
0.102
0.055
0.094
0.134
0.03
0.793
0.620
0.582
0.17
0.143
0.216
11/18
Package mechanical data STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
DIM.
L
L1
L20
L30
øP
Q e1
F
H1
J1
E e c
D
A b b1
MIN.
4.40
0.61
1.15
0.49
15.25
10
2.40
4.95
1.23
6.20
2.40
13
3.50
3.75
2.65
TO-220 MECHANICAL DATA
mm.
TYP MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
MIN.
0.173
0.024
0.045
0.019
0.60
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
16.40
28.90
3.85
2.95
0.147
0.104
inch
TYP.
0.645
1.137
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
0.151
0.116
12/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
DIM.
c c2
D e e1
A
A1 b b1
E
L
L1
L2
8.95
2.40
4.95
10
13
3.50
1.27
MIN.
4.40
2.40
0.61
1.14
0.49
1.23
Package mechanical data
TO-262 (I
2
PAK) MECHANICAL DATA
mm.
TYP inch
TYP.
9.35
2.70
5.15
10.40
14
3.93
1.40
MAX.
4.60
2.72
0.88
1.70
0.70
1.32
0.352
0.094
0.194
0.393
0.511
0.137
0.050
MIN.
0.173
0.094
0.024
0.044
0.019
0.048
0.368
0.106
0.202
0.410
0.551
0.154
0.055
MAX.
0.181
0.107
0.034
0.066
0.027
0.052
13/18
Package mechanical data STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
DIM.
L2
L3
L4
G
G1
H
L5
L6
L7
Ø
F
F1
F2
A
B
D
E
0.75
1.15
1.15
4.95
2.4
10
MIN.
4.4
2.5
2.5
0.45
28.6
9.8
2.9
15.9
9
3
TO-220FP MECHANICAL DATA
mm.
TYP
16
1
1.7
1.7
5.2
2.7
10.4
MAX.
4.6
2.7
2.75
0.7
30.6
10.6
3.6
16.4
9.3
3.2
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
1.126
.0385
0.114
0.626
0.354
0.118
inch
TYP.
0.630
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
1.204
0.417
0.141
0.645
0.366
0.126
L6
L7
L3
L2
L5
L4
1 2 3
14/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60 Package mechanical data
DIM.
L
L2
L3
M
D1
E
E1
G
R
V2
B2
C
C2
D
A
A1
A2
B
10
4.88
15
1.27
1.4
2.4
0º
1.14
0.45
1.23
8.95
MIN.
4.4
2.49
0.03
0.7
D
2
PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
TYP
1.7
0.6
1.36
9.35
MAX.
4.6
2.69
0.23
0.93
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
8
10.4
0.393
8.5
5.28
15.85
1.4
1.75
3.2
0.192
0.590
0.050
0.055
0.094
0.4
4º
inch
TYP.
0.315
0.334
0.015
0.208
0.625
0.055
0.068
0.126
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
1
15/18
Packaging mechanical data
5
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Packaging mechanical data
D
2
PAK FOOTPRINT
16/18
A0
B0
D
D1
E
F
K0
P0
P1
P2
R
T
W
TAPE MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
10.5
10.7
0.413 0.421
15.7
15.9
0.618 0.626
1.5
1.6
0.059 0.063
1.59
1.61
0.062 0.063
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
4.8
5.0
0.189 0.197
3.9
4.1
0.153 0.161
11.9
12.1
0.468 0.476
1.9
2.1
0.075 0.082
50 1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
TAPE AND REEL SHIPMENT
N
T
D
G
A
B
C
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
BASE QTY
1000
BULK QTY
1000
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Table 9.
Date
Document revision history
26-Jul-2004
17-Feb-2005
25-Oct-2006
18-Dec-2006
27-Aug-2007
Revision
8
9
10
11
12
Changes
First Release
Insert the TO-247 package
The document has been reformatted
Text updates on
Table 5.
Updated
Figure 2
and
Figure 4
Revision history
17/18
STB20NM60/-1 - STP20NM60FP - STP20NM60 - STW20NM60
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
18/18
