User's Guide | Acer S10 User`s guide
Add to my manuals
40 Pages
The Acer S10 is a powerful and versatile handheld device that offers a wide range of features and capabilities. With its compact size and lightweight design, it's easy to take with you wherever you go. Capture your ideas and important moments with the integrated 2-megapixel camera, or expand your storage capacity with the built-in SD/MMC card slot, supporting up to 32GB of additional storage. Stay connected with Bluetooth technology and access a wealth of information and entertainment options with the pre-installed Windows Mobile 6.1 operating system.
advertisement
Acer n300 Handheld
User’s Guide
Disposal instructions
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle.
USA
For electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic
Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org.
iii
Disposal instructions
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle.
USA
For electronic products containing an LCD/CRT monitor or display:
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic
Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org.
iii
iv
About this User’s Guide
Disposal instructions
About this User’s Guide
Welcome to the Acer n300 Handheld User’s Guide. This User’s Guide is designed to help you get up and running quickly with your new Acer n300—a Microsoft ® Windows
Mobile TM Version 5.0 Software for Pocket PC handheld. It describes all you need to know about how to use your handheld as well as the application programs that come with it.
This User’s Guide will discuss the following topics:
• A tour of the Acer n300 system
• Setup and maintenance procedures
• Taking advantage of your handheld’s expansion features
• Synchronizing data between your handheld and your computer
• Connecting your handheld to a computer, a network, or the Internet
• Personalizing your handheld with your own preference settings
This User’s Guide introduces you to the many ways your Acer n300 can help you organize and manage both business and personal information to make your everyday activities a more productive and satisfying experience.
F i r s t t h i n g s f i r s t
Your guides
First things first
We would like to thank you for making Acer n300 your choice for your handheld needs. Your new sleek Acer n300 is a multi-functional tool packed with user-friendly features and high-performance applications designed to make organizing workrelated information and synchronizing it with your personal activities a time-efficient task. We hope you enjoy using your Acer n300 as much as we enjoyed creating it for you.
Use your Acer n300 to effectively manage information related to both business and personal tasks.
• Software installation and new applications
• Use the Microsoft ® Windows Mobile organizing and computing tasks
TM Version 5.0 software to perform
• Synchronize the information on your computer with the information on your handheld using Microsoft
®
ActiveSync
®
• Get connected to the Internet with the Microsoft ® Mobile Internet Explorer
• Create an on-the-go backup file
• Expand your handheld’s capabilities using the built-in SD/MMC slot
• Exchange information between devices that have Bluetooth
®
WLAN(optional) capabilities.
/
• Customize your handheld based on your personal requirements and preferences
Your guides
To help you use your Acer n300, we have designed a set of guides:
For information on:
Programs on your handheld
Refer to:
This User’s Guide. Bundled in the Acer n300 Handheld
Getting Started Disk, it provides online reference for using your Acer n300.
The Acer n300 Handheld Help. To view Help, tap and then Help. http://global.acer.com/ Up-to-date information regarding your handheld
Service enquiries http://global.acer.com/support/index.htm
v
F i r s t t h i n g s f i r s t
Package contents
Package contents
Your Acer n300 comes packed in a cardboard box. Carefully unpack the box and remove the contents. If any of the following items are missing or damaged, contact your dealer immediately:
• Acer n300 handheld
• Stylus
• Acer n300 Handheld Quick Guide
• Acer n300 Handheld Getting
Started Disk
• End User License Agreement • Cradle (for n311) or USB Sync
Cable ( USB Client, DC-in ) (for n310)
• AC Power Adapter
• n300 series pouch
• International Travelers Warranty
• Battery Pack
Maintaining your Acer n300
This section provides information on the following:
• Proper care and usage of your handheld
• Resetting your handheld
1
2
3
4
5
6
Proper care and usage of your Acer n300
Your Acer n300’s rugged and tough construction is designed to provide you with years of reliable and trouble-free service. Observing the following general maintenance procedures will help ensure this:
Take care not to scratch the screen of your handheld. Keep the screen clean. When working with your handheld, use the supplied stylus or plastic-tipped pens intended for use with touch-sensitive screens. Never use an actual pen or pencil or other sharp object on the screen surface.
Your handheld is not waterproof and should not be exposed to rain or moisture.
Under extreme conditions, water may enter the circuitry through the front panel buttons or expansion slots. In general, treat your handheld as you would a pocket calculator or other small electronic device.
Take care not to drop your handheld or subject it to any strong impact. Do not place your handheld in your back pocket; if you sit on it, you may damage it.
Protect your handheld from temperature extremes. For example, do not leave your handheld on the dashboard of a car on a hot day or on a day when temperatures are below the freezing point. Also, keep it away from heaters and other sources of heat.
Do not use or store your handheld in any location that is extremely dusty, damp or wet. Always use the (included) SD dummy card to protect the connectors when not in use.
Use a soft, damp cloth to clean your handheld. If the surface of the screen becomes soiled, clean it with a soft cloth moistened with diluted window-cleaning solution.
You can also use n300 series pouch to clean your handheld (included).
vi
F i r s t t h i n g s f i r s t
Maintaining your Acer n300
Resetting your Acer n300
You may have to perform a reset if your handheld no longer responds to the buttons on the screen.
Performing a soft reset
A soft reset allows your handheld to get a fresh start, similar to rebooting a computer.
To perform a soft reset:
• Using the tip of your stylus, lightly press the reset button inside the hole on the bottom of your handheld.
Performing a hard reset
A hard reset will erase all records and entries stored in your handheld. Never perform a hard reset unless a soft reset does not correct your problem. To perform a hard reset:
1. Press and hold the Today and Messaging (a) buttons on your Handheld.
vii
F i r s t t h i n g s f i r s t
Maintaining your Acer n300
2. While holding the Today and Messaging buttons (a), using the tip of your stylus, lightly press the reset button inside the hole (b) on the bottom of your handheld.
NOTE: When you perform a hard reset, formats, preferences, and other settings including date and time are restored to their factory default settings.
viii
Contents
Disposal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Your guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Maintaining your Acer n300 . . . . . . . . . . . . . . . . . . . . . . . vi
Proper care and usage of your Acer n300 . . . . . . . . . . . . . . . . . vi
Resetting your Acer n300 . . . . . . . . . . . . . . . . . . . . . . . vii
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Proprietary 26-pin I/O connector . . . . . . . . . . . . . . . . . . . . 2
Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Design and ergonomics . . . . . . . . . . . . . . . . . . . . . . . . 2
Acer n300 tour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Left view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Top view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Preparing to use your Acer n300 . . . . . . . . . . . . . . . . . . . . . . 7
Charging your Acer n300 . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up your Acer n300 . . . . . . . . . . . . . . . . . . . . . . .10
Installing the Microsoft® ActiveSync® software . . . . . . . . . . . . . .11
Connecting the computer . . . . . . . . . . . . . . . . . . . . . . .11
Performing the first synchronization process . . . . . . . . . . . . . . .13
Command interface . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Handheld buttons and the stylus . . . . . . . . . . . . . . . . . . . .15
Start menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Online help . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
2 Backup and restore data 17
Backup function . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Restore function . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3 Using expansion features 21
Using an SD/MMC card . . . . . . . . . . . . . . . . . . . . . . . . . .21
Inserting an SD/MMC card . . . . . . . . . . . . . . . . . . . . . . .21
Removing an SD/MMC card . . . . . . . . . . . . . . . . . . . . . .22
1
Using an USB thumb drive . . . . . . . . . . . . . . . . . . . . . . . . 22
Inserting an USB thumb drive - Through the Cradle . . . . . . . . . . . . 22
Inserting an USB thumb drive - Through the 3-in-1 Sync cable
(optional accessory) . . . . . . . . . . . . . . . . . . . . . . . . . 22
Appendix A: Regulation & safety notices 23
FCC notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Notice: Shielded cables . . . . . . . . . . . . . . . . . . . . . . . . . 23
Notice: Peripheral devices . . . . . . . . . . . . . . . . . . . . . . . . 23
Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Operation conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Notice: Canadian users . . . . . . . . . . . . . . . . . . . . . . . . . 24
Remarque à l’intention des utilisateurs canadiens . . . . . . . . . . . . . . 24
Declaration of Conformity for EU countries . . . . . . . . . . . . . . . . . 24
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . 25
LCD pixel statement . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Radio device regulatory notice . . . . . . . . . . . . . . . . . . . . . . 26
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
European Union (EU) . . . . . . . . . . . . . . . . . . . . . . . . . . 26
List of applicable countries . . . . . . . . . . . . . . . . . . . . . . . . 27
The FCC RF safety requirement . . . . . . . . . . . . . . . . . . . . . . 27
Canada — Low-power license-exempt radio communication devices (RSS-210) . . 27
Exposure of humans to RF fields (RSS-102) . . . . . . . . . . . . . . . . . 27
2
1 G e t t i n g s t a r t e d
System requirements
1
Getting started
This chapter will discuss the following topics:
• Basic requirements
• Feature highlights of your Acer n300
• Acer n300 system tour
• Step-by-step procedures on how to prepare your handheld for use
• Basic concepts in using your handheld
System requirements
In order to install the Microsoft ® ActiveSync ® software and use your new Acer n300 with a computer at work or at home, be sure the system(s) meet the following minimum system and program requirements.
• Intel ® Pentium ® processor (minimum 233 MHz)
• 64 MB RAM
• 120 MB disk space
• CD-ROM drive
• USB port
• SVGA (or compatible) graphics card supporting 256 colours
• Microsoft ® Windows ® XP, 2000
• Microsoft ® Internet Explorer 4.01
Features summary
Performance
• Samsung S3C2440 processor at 300/400 MHz
• System memory:
– 64 MB mobile SDRAM for system operation.
– 64 MB / 128 MB of flash memory for operating system, embedded applications, user applications and storage
• Microsoft
®
Windows Mobile TM Version 5.0 Software for Pocket PC, Premium
Edition with Microsoft
®
Outlook
®
2002
Display
• 3.7" high-brightness transflective TFT LCD
• 480 x 640 (VGA) resolution
• 65,536 colors
1
1 G e t t i n g s t a r t e d
Features summary
2
Audio
• Built-in industry standard 3.5 mm stereo earphone jack , 3 ring type
• Built-in mono speaker
• Built-in mono microphone
Proprietary 26-pin I/O connector
• USB Host (female)
• USB Client (male)
• Serial
• DC power in
Connectivity
• Bluetooth
®
1.2
• IEEE 802.11b WLAN (optional)
Expansion
• SD/MMC slot (SDIO compatible)
• USB Host 1.1
Battery
• Rechargeable 1200 mAH Lithium ion battery
• 8 hours operation time for normal usage (when backlight is inactive)
NOTE: Length of battery operation will depend on power consumption which is based on system resource use. For example, constantly using the backlight or using power-demanding applications will shorten battery life between charges.
• 3 hour charging time from empty to full capacity
Design and ergonomics
• Stylish, light and thin design
Specifications
Height
Width
Depth
Weight
Dimensions
110 mm
70 mm
13.7 mm
135 g (including stylus)
• User-friendly navigation features
– 5-way joystick for one-handed operation
– Quick buttons for easy launch of commonly-used applications
– Press for one-tap access to all available applications
Acer n300 tour
Front view
1 G e t t i n g s t a r t e d
Acer n300 tour
4
5
2
3
6
1
No.
Component
Power / Bluetooth
®
/
802.11b WLAN LED indicator
Description
Power LED indicator.
- status description:
• Flashing green - Charging
• Steady green - Charging complete
• Flashing red - Alarm indicator
3.7” TFT LCD
Today button
Messaging button
Built-in microphone
Calendar button
Bluetooth
®
/ 802.11b WLAN LED indicator.
- status description:
• Flashing blue - Bluetooth
®
/ 802.11b WLAN is on
Displays the applications and data stored in your handheld.
Displays the Today screen.
Activates the Messaging program.
Inputs audio into your handheld.
Activates the Calendar program.
3
1 G e t t i n g s t a r t e d
Acer n300 tour
7
No.
8
Component
5-way joystick
Contacts button
Description
Enables 5 direction scrolling in various menus and applications. Press the center of the joystick on to simulate the function of the Enter key.
Activates the Contacts program.
NOTE: If your handheld is off, pressing any Quick button turns on the handheld and launches the program assigned to that button.
Left view
4
1
No.
2
Label
Power button
Hold switch
Description
Press the button to turn on your handheld (power LED lights up green) if it is off. Press the button to turn off your handheld if it is on.
Slide to lock all buttons from being accidentally pressed when handheld is placed in pocket or bag. A red dot is visible on the hold switch when in hold state.
Using the backlight
If lighting conditions make it difficult for you to see the information on your handheld, use the backlight to illuminate your screen.
When the backlight is off, press the power button and hold it down for about two seconds. Release the button when the backlight turns on. Alternatively, you can tap the LCD to activate the backlight.
When the backlight is on, press the power button and hold it down for two seconds. Release the button when the backlight turns off.
1 G e t t i n g s t a r t e d
Acer n300 tour
Top view
1
No.
2
3
Label Description
Stylus holder
SD/MMC slot
Secures the stylus to your handheld. To use the stylus, remove from its holder and hold it as you would hold a pen or pencil.
Accepts a Secure Digital or MultiMedia Card, allowing you to add more memory, install add-on applications or use audio or text files stored on it with internal applications. You can also use expansion cards to back up data from your handheld.
Earphone jack Connects to audio line-out devices (earphones/headphones).
5
1 G e t t i n g s t a r t e d
Acer n300 tour
Bottom view
1
No.
2
Label
Proprietary
26-pin I/O connector
Soft Reset
Description
Connects your handheld to a portable or desktop computer and
DC power supply to an AC wall outlet to charge the battery.
- USB Host
- USB Client
- Serial
- DC power in
Using the tip of your stylus, lightly press the reset button inside the hole on the bottom of your handheld.
6
Rear view
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
1
No.
2
3
Label
Speaker
Battery access latch
Battery bay
Description
Outputs audio from your handheld.
Unlatches the battery cover to remove the battery pack.
Houses the handheld’s battery pack.
Preparing to use your Acer n300
Perform the following easy installation tasks to begin using your handheld:
• Charge your handheld
• Set up your handheld
• Install the Microsoft
®
ActiveSync
®
software in your computer
• Connect n300 to your computer
• Perform the first ActiveSync operation
Charging your Acer n300
For initial use, you need to charge your handheld for four hours. After that, you can charge it for a few minutes each day to recharge the battery to full capacity. Normally,
7
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300 you can use your handheld for 8 straight hours of operation (backlight inactive) before you need to recharge the battery.
To charge your Acer n300
Unlock the battery access latch to open the battery cover (a), insert the battery pack into the battery bay (b), then close the battery cover to lock the battery pack..
1
2
NOTE: To take the battery pack out, first unlock the battery access latch to open the battery cover, then pull the battery pack out of the bay.
Connecting the Sync cable
Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
Plug the AC adapter into any AC current outlet and charge the device for at least four hours.
8
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
1
2
Connecting the Cradle
Connect the AC adapter cord to the DC-in jack at the back of the cradle.
Plug the AC adapter into any AC current outlet and charge the device for at least 4 hours.
Power LED status during charging:
• Charging - LED indicator flashes green
• Charging complete - LED indicator steady green
If the battery level becomes low in the course of normal use, a status icon appears on the handheld screen indicating low or critical low battery status. Perform an
ActiveSync ® operation to back up your data; then recharge the battery.
9
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
1
2
3
Setting up your Acer n300
After you have initially charged your handheld for four hours, you can now set it up.
Refer to the instructions below.
To set up your Acer n300
Disable hold switch first.
Turn on your handheld by pressing the power button on the left side.
Follow the onscreen instructions to set up your handheld.
10
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
1
2
3
4
Installing the Microsoft
®
ActiveSync
®
software
The main function of the Microsoft ® ActiveSync ® software is to synchronize the information on your computer with the information on your handheld.
Synchronization compares the data on your handheld with your computer and updates the information on both locations. This will then serve as a backup data in case something happens to your handheld.
The following instructions tell you how to install the ActiveSync
® software.
Important installation notes
• Before installing ActiveSync
®
, make sure that your handheld cradle is not yet connected to your computer. Connect the cradle only after you have finished installing ActiveSync
®
.
• By default, the Getting Started Disk will check the version of Outlook
®
/
ActiveSync ® included on the disk and will compare this with the version of
Outlook
®
/ActiveSync
®
installed on your computer. If the version of Outlook
®
/
ActiveSync
®
on the disk is newer than the version installed, then the disk will recommend an upgrade. If the version on the disk is older or the same as that installed, then Outlook ® /ActiveSync ® installation will be skipped.
• It is recommended that users install Outlook
®
2002 from this CD before installing ActiveSync
®
.
• Do not copy the ActiveSync
®
files to your computer’s hard disk. You must use the Acer n300 Handheld Getting Started Disk to place the files in their proper locations and to decompress the files.
To install the Microsoft ® ActiveSync ® software
Exit any open programs, including those that run at startup, and disable any virusscanning software.
Insert the Acer n300 Handheld Getting Started Disk into the computer’s CD-ROM drive.
The CD’s welcome page appears.
Click the animated forward icon to go to the next screen.
Please follow the instructions to install Microsoft
®
Outlook
®
2002 and Microsoft
®
ActiveSync ® 4.0.
After installation, the ActiveSync ® icon will appear on your computer’s system tray (on the lower right-hand corner of the screen).
Refer to the ActiveSync ® software online Help for information on how to use the software. If at any time, you would like to restart this setup program, simply re-insert the CD into the CD-ROM drive.
Connecting the computer
The USB sync cable or cradle that comes with your handheld enables you to synchronize the information on your handheld with the data in your computer using
ActiveSync ® technology.
11
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
1
2
3
To connect the computer
Via the USB Sync cable
Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
Plug the AC adapter into any AC current outlet.
Plug the USB client connector into an available USB port on your computer.
3
4
1
2
5
Via the Cradle
Connect the AC adapter cord to the DC-in jack at the back of the cradle.
Put n300 on the cradle.
Plug the AC adapter into any AC current outlet.
Connect the mini USB client connector into the USB client port at the back of the cradle.
Plug the USB client connector into an available USB port on your computer.
12
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
Performing the first synchronization process
After completing the setup procedures you can now perform the first ActiveSync
® operation with the help of the 'New Partnership' setup wizard.
1
This wizard will help you:
• Set up a partnership so you can synchronize information between your handheld and your computer
• Customize your synchronization settings
To perform the first synchronization process
Connect the sync cable to your handheld.
13
1 G e t t i n g s t a r t e d
Preparing to use your Acer n300
2 Plug the USB client connector into a USB port on your computer.
The 'New Partnership' setup wizard will automatically start on your computer screen.
14
3
NOTE: If the wizard does not automatically appear, launch ActiveSync
® on your computer by clicking on its icon from >Programs.
Follow the onscreen instructions.
The first synchronization process will automatically begin when you finish using the wizard.
After your first synchronization, take a look at Calendar, Contacts, and Tasks on your handheld. You'll notice that information you've stored in Microsoft Outlook on your computer has been copied to your handheld, and you didn't have to type a word.
Disconnect your handheld from your computer and you're ready to go!
Once you have set up ActiveSync
®
and completed the first synchronization process, you can initiate synchronization from your handheld. To switch to ActiveSync ® on your handheld, tap >ActiveSync
®
.
1 G e t t i n g s t a r t e d
Command interface
Command interface
Handheld buttons and the stylus
Your handheld has hardware buttons that control actions and scroll functions, and a stylus for selecting items and entering information.
On your handheld, the stylus replaces the mouse.
• Tap. Touch the screen once with the stylus to open items and select options.
• Drag. Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items.
• Tap and hold. Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action you want to perform.
Start menu
From the Start menu, you can select programs, settings and Help topics. To display the
Start menu, from the top of any screen tap .
Online help
Refer to online Help for information on how to use the applications embedded. Please press >Help>Content for online help.
You can find information about the following Microsoft
®
applications.
• Outlook
®
Mobile - Organize personal information: calendar, contacts, tasks, notes and messaging
• Word TM Mobile - Word processing application compatible with Microsoft
®
Word
• Excel TM Mobile - Spreadsheet application compatible with Microsoft
®
Excel
• PowerPoint TM
PowerPoint)
Mobile - View presentation slides (compatible with Microsoft
®
• Windows
®
Media TM Player 10 Mobile - Play back multimedia files: MP3,
Windows ® Media audio, Windows ® Media video, and streaming video files
• Internet Explorer Mobile - Browse websites and download files and images
• Calculator - Easy-to-use calculator
• Games - Enjoy playing classic Solitaire and Bubble Breaker.
• File Explorer - Manage files in main memory or on storage media cards
• Microsoft
®
ActiveSync
®
4.0 - Synchronize PIM data with Microsoft
®
Outlook
®
• Pictures & Videos - View pictures and videos
• Lunar View - View the Chinese lunar calendar
• Pocket MSN - Provide instant access to your Hotmail account, and MSN
Messenger Contacts list
• Terminal Services Client - Run applications or remotely manage a server from the Pocket PC
15
1 G e t t i n g s t a r t e d
Command interface
If you need Help for any specific application, launch the application and then tap
>Help for online help.
You can use your handheld to exchange information with mobile devices, your computer, a network, or the Internet. If you need more information on Bluetooth ® or
Wireless LAN (optional):
Bluetooth
®
Help
• Turn Bluetooth ® on by tapping
Manager or Bluetooth
®
Settings>
>Turn Bluetooth ® on> >Bluetooth
>Help for Bluetooth
®
help.
®
• Or you can tap >Help>Contents>Setting Up Connections for more
Bluetooth
®
information.
Wireless LAN Help (optional)
• Turn Wireless LAN on by tapping
>Help for WLAN help.
>Turn WLAN on> >WLAN Utility>
• Or you can tap >Help>Contents>Setting Up Connections or Browsing the
Web for more information.
16
2 B a c k u p a n d r e s t o r e d a t a
2
Backup and restore data
1
2
Backup/Restore enables you to back up data files and applications from your handheld to a storage device and to restore data to your handheld. Advanced security features offer password protection for sensitive documents/applications during
Backup and/or Restore operations. The expansion features of your handheld allow you to use any of the following storage devices:
• SD Card (Secure Digital Card)
• MMC card
• USB thumb drive
Please do not press any button including the power button during a backup or restore operation.
There are two tabs (from left to right) in the program window corresponding to the two functions of Backup and Restore.
• Backup
• Restore
To launch Backup/Restore:
Insert a storage device (SD/MMC card or USB thumb drive) if you want to do backup/ restore operation on a storage device.
Tap >Programs>Backup/Restore.
17
2 B a c k u p a n d r e s t o r e d a t a
Backup function
18
3
4
5
6
1
2
7
1
To perform data backup
Close all running programs except for Backup/Restore.
In the Backup tab, choose whether to accept the default filename (MyBackup) or type a new one by tapping on the keyboard icon on the bottom of the screen.
Select a storage device from the 'Backup to' pull-down menu.
Define the backup scope (default: PIM only) from ‘Option' pull-down menu.
Check the password box and enter a password if you want to secure the backup file.
Tap to proceed with the backup process.
During the backup process, a progress screen will appear displaying backup status.
When the backup process is completed, a message box appears, saying that backup operation is completed.
Restore function
You can only restore backup files that are generated by Backup/Restore; file format is
*.abk (Acer backup).
To perform data restoration
Close all running programs except for Backup/Restore.
2 B a c k u p a n d r e s t o r e d a t a
2 Select a source storage device from the 'Restore from' pulldown menu.
The lower half of the screen will display a list of files contained in the selected storage device. Filename, file size and date when the backup file was created are indicated in the list.
3
4
5
6
1
2
3
Tap a filename to select the file you wish to restore, and please note that non-.abk files are not shown.
Select file, then tap information including:
button. The window will shift to display the backup file
• File name - filename of the selected .abk file.
• Backup date - date when the selected .abk file was created.
• Backup option & file size.
• Main memory free size - free space in your handheld’s main storage memory.
This should be bigger than the file size of the selected .abk file for the restore process to continue.
Tap again to proceed with the restore process.
During the restore process, a progress screen will appear displaying restore status.
When the restore process is completed, a message box appears, saying restore operation is complete.
To delete a file from a storage device
To increase the size of available free space in a storage device, you can delete files that you no longer need.
Tap the Restore tab.
Tap a menu item to select a storage device.
From the list, tap a filename until a delete pop-up menu is displayed.
19
2 B a c k u p a n d r e s t o r e d a t a
4 Tap Delete to remove the file.
20
3 U s i n g e x p a n s i o n f e a t u r e s
Using an SD/MMC card
3
Using expansion features
The slim and lightweight design of your Acer n300 belies its impressive expansion features . These expansion features include:
• SD/ MMC slot
• USB host port via sync cable or cradle
These expansion features allow you to:
• Install additional applications
• Increase storage capacity
• Perform backup procedures
NOTE: When using any peripheral device with your handheld, please refer to the documentation accompanying each device for information on how to install and operate it.
Using an SD/MMC card
On the top side of your handheld is an SD/ MMC slot. This allows you to expand your handheld memory and perform data backup.
Refer to "Top view" on page 5 for the location of the SD/
MMC slot.
1
2
Inserting an SD/MMC card
Hold your handheld securely.
Insert the SD/
MMC card into the SD/MMC slot.
21
3 U s i n g e x p a n s i o n f e a t u r e s
Using an USB thumb drive
3
1
2
Push the card into the slot using your finger until you feel the card lock and hear an audible system sound. This indicates that the card is properly seated within the slot.
Removing an SD/MMC card
Hold your handheld securely.
Release the card from the slot by using your thumb to push against the top of the card, as if you were pushing it further into the slot (a). An audible system sound and a click will signal that the card has been released.
3 Gently remove the card from the slot (b).
Using an USB thumb drive
Your Acer n300 supports USB host expansion. Via cradle or sync cable, you can access a
USB thumb drive directly from your n300.
1
2
3
Inserting an USB thumb drive - Through the Cradle
Connect the AC adapter cord to the DC-in jack at the back of the cradle.
Plug the AC adapter into any AC current outlet.
Insert the USB thumb drive into USB host port of Cradle.
1
2
3
Inserting an USB thumb drive - Through the 3-in-1 Sync cable (optional accessory)
Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
Plug the AC adapter into any AC current outlet.
Insert the USB thumb drive into USB host port of sync cable.
22
Appendix A: Regulation & safety notices
FCC notice
Appendix A:
Regulation & safety notices
This appendix lists the general notices of your PDA.
FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with noncertified peripherals is likely to result in interference to radio and TV reception.
23
Appendix A: Regulation & safety notices
Caution
Caution
Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this computer.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Declaration of Conformity for EU countries
Hereby, Acer, declares that this PDA series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. (Please visit http:// global.acer.com/products/pda/reg-pda/index.htm for complete documents.)
Compliant with Russian regulatory certification
24
Appendix A: Regulation & safety notices
Important safety instructions
Important safety instructions
Read these instructions carefully. Save them for future reference.
1 Follow all warnings and instructions marked on the product.
2 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a water-moistened cloth for cleaning.
3 Do not use this product near water.
4 Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.
5 This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
6 Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.
7 If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
8 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
9 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
10 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a When the power cord or plug is damaged or frayed.
b If liquid has been spilled into the product.
c If the product has been exposed to rain or water.
d If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
e If the product has been dropped or the case has been damaged.
f If the product exhibits a distinct change in performance, indicating a need for service.
11 The Acer PDA uses a lithium battery.
Replace the battery with the same type as the product's battery we recommend in the product specification list. Use of another battery may present a risk of fire or explosion.
12 Warning! Batteries may explode if not handled properly. Do not disassemble or dispose of them in fire. Keep them away from children and dispose of used batteries promptly.
25
Appendix A: Regulation & safety notices
LCD pixel statement
13 To avoid hazard of unexpected electrical shock, use the AC adapter only when the wall socket is properly grounded.
14 Do not use your PDA while exercising.
LCD pixel statement
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction.
Radio device regulatory notice
NOTE: Below regulatory information is for models with wireless LAN and/or Bluetooth ® only.
General
This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/ or Bluetooth ® modules). Below information is for products with such devices.
European Union (EU)
This device complies with the essential requirements of the European Council
Directives listed below:
73/23/EEC Low Voltage Directive
• EN 60950
89/336/EEC Electromagnetic Compatibility (EMC) Directive
• EN 55022
• EN 55024
• EN 61000-3-2/-3
99/5/EC Radio & Telecommunications Terminal Equipment (R&TTE) Directive
• Art.3.1a) EN 60950
• Art.3.1b) EN 301 489 -1/-17
• Art.3.2) EN 300 328-2
26
Appendix A: Regulation & safety notices
List of applicable countries
List of applicable countries
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece, Spain,
France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal, Finland,
Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary, Czech Republic,
Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in the countries of
European Union, as well as Norway, Switzerland, Iceland and Liechtenstein. This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact local office in the country of use.
The FCC RF safety requirement
The radiated output power of the wireless LAN Mini PCI Card and Bluetooth ® card is far below the FCC radio frequency exposure limits. Nevertheless, the Acer PDA shall be used in such a manner that the potential for human contact during normal operation is minimized as follows:
• An improper installation or unauthorized use may cause harmful interference to radio communications. Also any tampering of the internal antenna will void the FCC certification and your warranty.
• To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm (8 inches) must be maintained between this device and any other antennas or transmitters.
Canada — Low-power license-exempt radio communication devices (RSS-210)
a Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.
b Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is intended to be operated indoors and installed outdoors is subject to licensing.
Exposure of humans to RF fields (RSS-102)
The Acer PDA employs low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's website at www.hc-sc.gc.ca/rpb.
27
Appendix A: Regulation & safety notices
Exposure of humans to RF fields (RSS-102)
28
Index
A
ActiveSync®
B backlight
Backup opening 17
Restore function 18
C command interface device buttons
Today screen copyright
E expansion features 21
Acer versatile connector 21 attaching expansion sleeve inserting CompactFlash card removing CompactFlash card
21
22
H handheld guides
maintenance
package contents resetting
handheld features
audio
battery pack
install connectivity display
ergonomics expansion
performance
handheld setup connecting cradle installing battery
installing Microsoft ActiveSync software initial synchronisation
S system tour
bottom view front view left view top view
,
T third-party applications
IA Album LE 20
1
2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Disposal instructions
- 4 About this User’s Guide
- 5 First things first
- 5 Your guides
- 6 Package contents
- 6 Maintaining your Acer n300
- 6 Proper care and usage of your Acer n300
- 7 Resetting your Acer n300
- 11 1 Getting started
- 11 System requirements
- 11 Features summary
- 11 Performance
- 11 Display
- 12 Audio
- 12 Proprietary 26-pin I/O connector
- 12 Connectivity
- 12 Expansion
- 12 Battery
- 12 Design and ergonomics
- 13 Acer n300 tour
- 13 Front view
- 14 Left view
- 15 Top view
- 16 Bottom view
- 17 Rear view
- 17 Preparing to use your Acer n300
- 17 Charging your Acer n300
- 20 Setting up your Acer n300
- 21 Installing the Microsoft® ActiveSync® software
- 21 Connecting the computer
- 23 Performing the first synchronization process
- 25 Command interface
- 25 Handheld buttons and the stylus
- 25 Start menu
- 25 Online help
- 27 2 Backup and restore data
- 28 Backup function
- 28 Restore function
- 31 3 Using expansion features
- 31 Using an SD/MMC card
- 31 Inserting an SD/MMC card
- 32 Removing an SD/MMC card
- 32 Using an USB thumb drive
- 32 Inserting an USB thumb drive - Through the Cradle
- 32 Inserting an USB thumb drive - Through the 3-in-1 Sync cable (optional accessory)
- 33 Appendix A: Regulation & safety notices
- 33 FCC notice
- 33 Notice: Shielded cables
- 33 Notice: Peripheral devices
- 34 Caution
- 34 Operation conditions
- 34 Notice: Canadian users
- 34 Remarque à l’intention des utilisateurs canadiens
- 34 Declaration of Conformity for EU countries
- 35 Important safety instructions
- 36 LCD pixel statement
- 36 Radio device regulatory notice
- 36 General
- 36 European Union (EU)
- 37 List of applicable countries
- 37 The FCC RF safety requirement
- 37 Canada - Low-power license-exempt radio communication devices (RSS-210)
- 37 Exposure of humans to RF fields (RSS-102)
- 39 Index