Psion Teklogix WORKABOUT PRO M/C Hand-Held Computer Quick Start Guide
Reklama
Reklama
WORKABOUT PRO M/C
Hand-Held Computer
Quick Start Guide
March 11, 2004 PN 8000025.A
ISO 9001 Certified
Quality Management System
© Copyright 2004 by Psion Teklogix Inc.,
Mississauga, Ontario
This document and the information it contains is the property of Psion
Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are the property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix warrants a return-to-factory warranty for a period of one year.
In some regions, the warranty exceeds this period. Please contact your local
manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization. See Psion Teklogix terms and conditions of sale for full details.
Service
When requesting service, please provide information concerning the nature of the failure and the manner in which the equipment was used when the failure occurred. Type, model, and serial number should also be provided.
Before returning any products to Psion Teklogix, please call the Customer
Services Group for a Return Authorization number.
Support Services
Psion Teklogix provides a complete range of product support services to its
customers. For detailed information, please refer to “Support Services &
Worldwide Offices” on page 29.
Disclaimer
Every effort has been made to make this material complete, accurate, and upto-date. Psion Teklogix Inc. reserves the right to make changes without notice and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but not limited to typographical errors.
Table Of Contents
1. Basic Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Installing The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Switching The Unit On. . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 Switching The Unit Off (Suspend) . . . . . . . . . . . . . . . . 4
2. Getting To Know The WORKABOUT PRO . . . . . . . . . . . . 5
2.1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2.1 Battery Swap And Runtime . . . . . . . . . . . . . . . . 9
2.3 The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3.1 Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3.2 The Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3.3 Adjusting The Keypad Backlight . . . . . . . . . . . . 12
2.4 The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4.1 Colour Display . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.4.2 Monochrome Display . . . . . . . . . . . . . . . . . . . . . 14
2.4.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . 14
2.5 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5.1 The LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5.2 Onscreen Indicators . . . . . . . . . . . . . . . . . . . . . . 16
2.5.3 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . 18
3. Navigating In Windows CE. . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1 Navigating A Touchscreen . . . . . . . . . . . . . . . . . . . . . . 19
3.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . 19
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 1
3.3 The Startup Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.3.1 Accessing Desktop Icons . . . . . . . . . . . . . . . . . . 20
3.3.2 The Taskbar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.4 The Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.5 Using A Dialogue Box . . . . . . . . . . . . . . . . . . . . . . . . . 26
4. General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4.1 Caring For The Touchscreen. . . . . . . . . . . . . . . . . . . . . 28
4.2 Cleaning The WORKABOUT PRO . . . . . . . . . . . . . . . 28
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Program License Agreements. . . . . . . . . . . . . . . . . . . . . . . . . . 38
2 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
1. Basic Preparation
Important: All approval and safety information is outlined in the
‘WORKABOUT PRO Hand-Held Computer User Manual’
– part number 8000024. This manual is available on our web site www.psionteklogix.com through the Teknet extranet. It is important that you review all safety guidelines before charging a battery or operating a scanner.
This quick start guide provides basic information on the operation and features of the Psion Teklogix WORKABOUT PRO M (Monochrome) and WORKABOUT PRO C (Colour) Hand-Held Computer. For more detailed information, refer to the WORKABOUT PRO
M/C Hand-Held Computer User Manual (PN 8000024) or the documentation supplied with the application you are using.
Typically, WORKABOUT PROs are configured at the factory and arrive ready for use.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counterclockwise to unlock the cover and remove it. The top of the stylus is shaped to help you loosen the fasteners.
• Insert the charged battery. Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 3
Note: If you are using a docking station, you can insert an uncharged battery, dock the unit and switch it on.
1.3 Switching The Unit On
• Press and hold down the <ENTER/ON> key for at least one second to switch the unit on.
• When the LED flashes green, release <ENTER/ON>.
A splash screen displaying the Psion Teklogix logo and the
Microsoft® Windows CE .NET logo appears followed by the startup desktop.
Note: If the unit was already in use – the unit may be off (suspend state) – pressing <ENTER/ON> ‘wakes’ the unit from this state. The screen in which you were working prior to the suspend state is displayed.
1.4 Switching The Unit Off (Suspend)
• Press the <BLUE> key, and then press <ENTER/ON> to switch off the WORKABOUT PRO.
4 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2. Getting To Know The WORKABOUT PRO
2.1 Features
Sound Port
Stylus
(pointing tool)
LED
(Light Emitting Diode)
Microphone
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 5
End Cap
Back Cover
Battery Cover
Battery Cover
Fasteners
Tether Port
Low Insertion
Force (LIF) Port
Audio Jack
6 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2.2 The Battery
The WORKABOUT PRO will operate with a standard 1800 mAh
Lithium Ion battery pack, a high-capacity 2700 mAh Lithium-Ion battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, the battery pack must first be charged.
Warning: Before charging or using the battery pack, it is critical that the safety information in this section be reviewed and that all warnings are strictly followed.
BATTERIES ARE CONSIDERED HAZARDOUS WASTE.
For proper disposal, forward all used batteries to one of:
Psion Teklogix Inc.
2100 Meadowvale Blvd.
Mississauga, Ontario
Canada
L5N 7J9
Psion Teklogix Corp.
1810 Airport Exchange Blvd.
Suite 500
Erlanger, Kentucky
USA 41018
Psion Teklogix S.A.
La Duranne; 135 Rue Rene Descartes; BP 421000
13591 Aix-En-Provence
Cedex 3; France
Warning: TO PREVENT the battery from leaking acid, generating heat or exploding, adhere to precautions below.
• The battery incorporates built-in safety devices. To ensure their proper function, do not disassemble or alter any parts of the battery.
• Do not short-circuit the battery by directly connecting any of the exposed terminals with metal objects such as wire. Do not transport or store the battery together with metal objects such as necklaces, hair pins, etc.
• Do not dispose of batteries in fire.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 7
• Do not use or leave the battery near a heat source such as a fire or heater.
• Do not immerse the battery in water.
• When charging, use the battery charger specifically designed for the battery.
• Do not pierce, strike, throw or step on the battery.
• Do not directly solder the battery.
• Do not connect the battery to an electrical outlet, vehicle cigarette lighter, etc.
• Do not put battery into a microwave oven or pressurized container.
• Do not use the battery in combination with primary batteries
(such as dry-cell batteries) or batteries of different capacities or brands.
• Immediately remove the battery from the device or battery charger and stop use if the battery gives off an odour, generates heat, becomes discoloured or deformed, or in any way appears abnormal during use.
• Do not continue charging the battery if it does not recharge within the specified charge time.
• The battery may burst or ignite if the battery leaks. Always ensure that it is away from any exposed flames.
• If leaking electrolyte sprays into your eyes, rinse them with clean running water, and immediately seek medical attention.
• Do not store the battery in extremely high temperatures
(e.g., a vehicle, strong direct sunlight, etc.). This may cause the battery to overheat or ignite, and it may also reduce the performance and service life of the battery.
• Do not use in areas where static electricity is greater than what the manufacturer guarantees.
• Keep batteries out of reach of children .
8 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2.2.1 Battery Swap And Runtime
Under normal operating conditions, fully charged 1800 mAh batteries hold a charge for up to 8 hours. 2700 mAh batteries can hold a charge for up to 12 hours.
2.3 The Keyboard
Arrow Keys
Scan Key
Scan Key
Contrast Key
Orange Key
Blue Key
Display
Backlight Key
The keyboard is equipped with a set of standard keys along with a
<ORANGE> and a <BLUE> modifier key to provide access to additional keys and system functions. These additional keys are colour coded in orange and blue print above the standard keys.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 9
2.3.1 Modifier Keys
The <SHIFT>, <CTRL>, <ALT>, <ORANGE> and <BLUE> keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, a square bracket is printed in orange print above the <4> key. Pressing the <ORANGE> key followed by the <4> key displays a square bracket rather than the number 4.
The <SHIFT>, <CTRL> and <ALT> keys operate much like a desktop keyboard except that they are not chorded – two keys cannot be held down simultaneously. The modifier key must be pressed first followed by the key whose function you want modified.
Activating Modifier Keys
When a modifier key is pressed once, the modifier key icon displays the key in lowercase letters in the taskbar. For example, pressing <CTRL> once displays ctrl key in the taskbar. Once the next key is pressed, the modifier key becomes inactive and disappears from the taskbar.
Locking Modifier Keys
When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key icon displays the key in uppercase letters in the taskbar.
For example, pressing the <BLUE> key twice locks it on – it is displayed as BLUE KEY in the taskbar at the bottom of the screen.
The locked modifier key remains active until it is pressed a third time to unlock or turn it off.
2.3.2 The Keys
The <SHIFT> Key
Used to display uppercase alpha characters and provide access to the symbols above the numeric keys.
10 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
The Arrow Keys
Contained in the round disk-shaped key at the top of the keyboard.
Moves the cursor around the screen – up, down, left and right.
The <BKSP/DEL> Key
Moves the cursor one character to the left, erasing the incorrectly entered key stroke.
<DEL> key (<BLUE> <BKSP>) erases the character at the cursor position.
The <CTRL> And <ALT> Key
Modify the function of the next key pressed and are application dependent.
The <TAB> Key
Usually moves the cursor to the next field to the right or downward. Pressing <ORANGE> <TAB> move the cursor backward.
The <ESC> Key
Generally used as a keyboard shortcut to close the current menu, dialogue box or activity and return to the previous one.
The <SPACE> Key
Inserts a blank space between characters. In a Windows dialogue box, the <SPACE> key enables (
√
) or disables a checkbox.
The <SCAN> Keys
Activate the scanner beam while pressed. For units without internal scanners, these keys are inoperable.
The Function Keys – <F1> to <F10>
Perform special, custom-defined functions. These keys are accessed by pressing <BLUE> followed by numeric keys
<1> to <10>. They can be used with the Windows CE .NET operating system or another application.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 11
The Macro Keys – <M1> to <M3>
Contain up to 20 programmable characters (“positions”) and executable keys. These keys are accessed by pressing <ORANGE> followed by alpha keys <O>, <P> or <Q>. When pressed, the macro key executes a custom-defined string of characters, including executable keys.
2.3.3 Adjusting The Keypad Backlight
To adjust the intensity of the keypad backlight and the conditions under which this backlight is activated
• In the Control Panel, choose the Keyboard icon.
Note: Access may be restricted to supervisory use.
• In the Keyboard Properties dialogue box, open the Backlight tab.
Adjusts light intensity.
Determines the duration of time that the keyboard backlight stays on when unit is not in use.
2.4 The Display
Depending on the type of display – colour or monochrome – you can adjust the backlight or contrast of the display to improve character visibility.
12 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2.4.1 Colour Display
Adjusting The Backlight
The display backlight can be adjusted manually.
• Press the Backlight key < > to cycle through from light to darkest, and then back to lightest. Press <ORANGE> < > to cycle backward from darker to lighter.
To set the range of the backlight:
• Choose the Display icon in the Control Panel.
• Display the Backlight tab.
Note: For units equipped with monochrome screens, the Backlight key < > turns the backlight on or off. Backlight intensity cannot be adjusted.
Note also that adjustments may be restricted to supervisory use only.
Adjusts the light intensity of the backlight.
Sets duration of time the backlight stays on at the configured intensity when the unit is not in use.
Sets duration of time the backlight stays on at half the configured intensity when the unit is not in use.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 13
2.4.2 Monochrome Display
Adjusting The Contrast
Note: Contrast adjustment is only available on hand-helds equipped with monochrome screens. Contrast has no effect on units with colour screens.
The display contrast can be adjusted from the keyboard using the
Contrast key < > just below the arrow keys.
• Press this key until you are satisfied with the contrast adjustment. Press <ORANGE> < > to shift contrast backward.
To set the range of the contrast on a monochrome screen:
• In the Control Panel, choose the Display icon and select the Contrast tab.
Note: Keep in mind that this option may be restricted to supervisory use only.
Adjusts the display contrast.
2.4.3 Calibrating The Touchscreen
Note: This function may be restricted to supervisory use.
14 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
If the touchscreen has never been calibrated or if the stylus pointer is not accurate when you tap on an item:
• In the Control Panel, choose the Stylus icon, select the Calibration tab, and then tap on the <Recalibrate> button.
• Follow the onscreen directions to calibrate the display.
2.5 Indicators
WORKABOUT PROs use an LED (Light Emitting Diode), onscreen messages and audio tones as indicators.
2.5.1 The LED
A single, two-coloured LED is located on the left side of the unit, just above the <BKSP> key. When you press <ENTER/ON>, the
LED flashes green to indicate that the unit has been powered up. The
LED table below outlines the behaviour of the LED while the unit is docked in a charger.
Keep in mind that the application running on the WORKABOUT
PRO can dictate how the LED operates. Review the documentation provided with the application to determine LED behaviour.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 15
LED Behaviour
Solid Green
Solid red
Blinking red
Indication
Battery charge complete.
Charge in progress.
Alarm.
2.5.2 Onscreen Indicators
The taskbar at the bottom of the screen displays a variety of system status indicators.
The taskbar changes dynamically, and only those icons that are applicable are displayed. For example, if a Bluetooth radio is not installed, this icon is not displayed in the taskbar. Double-tapping on an icon displays the associated dialogue box.
Windows® Start Button
You can display the Start Menu by tapping on the Windows® Start button in the taskbar.
16 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Modifier Key Indicators
<SHIFT>, <CTRL>, <ALT>, <BLUE> and <ORANGE> are modifier keys that have onscreen indicators to show when a key is active or locked. If a modifier key is pressed once to activate it, the key is displayed in the taskbar in lowercase characters. If a modifier key is pressed twice, it is ‘locked on’ and the onscreen indicator is displayed in uppercase letters in the taskbar.
Battery Gauge
Battery icons are a visual indication of the remaining battery power.
If the unit is using external AC power, an AC icon is displayed.
Full 75% 50% 25% Empty AC Connection
Battery Charge
The battery charge icon is displayed in the taskbar when the handheld battery is being charged.
LIF and USB Devices
When a device such as a docking station or a charger is connected to the USB (tether) port or the LIF (Low Insertion Force) port and is activated, an associated icon appears in the taskbar.
New device connected: LIF Port New device connected: USB Port
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 17
Security Level
Security levels can be set to limit access and prevent inadvertent changes to application settings.
Bluetooth Radio
If a Bluetooth radio is installed, this icon is displayed in the taskbar.
2.5.3 Audio Indicators
The audio speaker provides a variety of sounds and can be configured to emit a sound under various conditions. Refer to ‘Volume
Adjustment’ in the ‘WORKABOUT PRO Hand-Held Computer User
Manual’ for details.
Note: The volume can also be adjusted using the V olume & Sound
Properties dialogue box in the Control Panel .
Adjusting The Speaker Volume
The volume keys are located above the <A> and <B> keys and are used to adjust the volume emitted from your unit.
The increase volume key is labelled with a plus symbol decrease volume key is labelled with a minus sign .
and the
To adjust the speaker volume:
• Press the <BLUE> key twice to lock it ‘on’.
• Press the increase volume
volume <B> key
<A> key or the decrease
until the volume meets your needs.
• Press the <BLUE> key again to ‘unlock’ it.
18 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
3. Navigating In Windows CE
On WORKABOUT PROs, the ‘point and click’ action associated with a desktop computer mouse is accomplished by tapping a stylus on the touchscreen. In addition, every ‘point and click’ action, an equivalent keyboard shortcut is also available.
3.1 Navigating A Touchscreen
All WORKABOUT PROs are equipped with a touchscreen and a stylus.
To prevent damage to the touchscreen, use only the stylus provided –
never use a screw driver or other sharp objects.
To open a file, launch an applet or open a folder:
• Tap the stylus on the appropriate icon.
Note: If the touchscreen is not registering your screen taps accurately, it may need recalibration. Refer to
3.2 Navigating Using The Keyboard
You can also use the keyboard to choose icons and navigate dialogue boxes, display the desktop, and so on.
Unlike a desktop computer, the WORKABOUT PRO does not support key chording (pressing two keys at the same time). You must press one key followed by the next in sequence.
Operation Key or Key Combination
Switch between applications <ALT> <TAB>
Open task manager screen <ALT> <ESC>
Move cursor Arrow keys
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 19
Open file, folder or icon
Exit & Save
<ENTER>
<ENTER>
Close/Exit & Do Not Save <ESC>
Navigate Dialogue Boxes Next field: <TAB>
Move cursor up: <SHIFT><TAB>
Display next tab : <CTRL> <TAB>
<SPACE> Select Radio Button/
Press Button
Go to Start Menu <BLUE><.>
3.3 The Startup Desktop
When the unit boots up, the startup desktop is displayed. Applications stored in the Startup folder start up immediately. The Startup folder is located in: \Windows\Startup and \Flash Disk\Startup.
3.3.1 Accessing Desktop Icons
• Double-tap on the icon to open a window or, in the case of an application icon, launch an application.
20 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
3.3.2 The Taskbar
A taskbar at the bottom of the screen displays icons through which you can view the security level and battery capacity. A unit equipped with a Bluetooth radio displays the appropriate icon in the taskbar. A hand-held attached to a charger, cradle or docking station displays the associated icon, and so on.
The taskbar also displays active modifier keys – <SHIFT>, <ALT>,
<CTRL>, <ORANGE> and <BLUE>. Keys that have been locked
“on” are displayed in uppercase letters.
Using The Taskbar
• Tap on an icon to display the associated dialogue box. For example, tapping on the battery icon displays the Power Properties dialogue box that indicates the current battery capacity.
3.4 The Start Menu
The Start Menu lists operations you can access and work with. It is available from the startup desktop or from within any application.
To display the menu:
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 21
• Tap on the Windows® Start button in the taskbar. Tap on the item in the menu with which you want to work.
Note: If your touchscreen is disabled, press <BLUE> <.>.
The Desktop
Choosing Desktop from the Start Menu displays the desktop.
Security Settings
To assign a security level:
• Choose Security from the Start Menu .
• Select a security level from the dialogue box, and type the appropriate password.
To change the password:
Note: Keep in mind that this is the same password as that assigned through the Password control panel applet.
22 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
• Choose a security level, and enter the existing password in the Password field.
• Choose the Set Password button.
In the Password Properties dialogue box:
• Type the new password in the Password: text box, and retype the new password in the Confirm Password: text box.
The System Tray
Note: You’ll only need to use this option to access the icons in the taskbar if your touchscreen has been disabled. If your touchscreen is working, you can tap on the taskbar icons to display associated dialogue boxes.
The System Tray option allows keyboard access to the icons in the taskbar at the bottom of the screen. The taskbar displays indicators such as a battery capacity gauge and the security level. These indicators are attached to dialogue boxes that provide additional information.
• Choose System Tray from the Start Menu.
When System Tray is chosen, the taskbar icons become accessible. To display the dialogue box attached to an icon:
• Use the <LEFT> and <RIGHT> arrow keys to highlight the icon with which you want to work.
• Press <ENTER/ON> to display the associated dialogue box.
The Task Manager
The Task Manager option allows you to switch to another task or to end an active task. To display the task manager window:
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 23
• Tap on Task Manager in the Start Menu .
Cycle Tasks
When Cycle Tasks is selected (and the Task Manager is not open), you can cycle through active applications. To cycle to the next active task:
• Tap on Cycle Tasks in the Start Menu
.
Power Info
Selecting Power Info from the Start Menu displays the Power Properties dialogue box. This dialogue box indicates the remaining charge capacity of the battery.
Programs
Program displays a sub-menu of options with which you can work access applications.
24 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Settings
Tapping on Settings displays a sub-menu of options with which you can access the Control Panel applets, configure your radio (Network and Dial-up Connections) and customize the Taskbar and Start Menu .
Run
Choosing the Run option displays a dialogue box in which you can enter the name of the program, folder or document you want to open.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 25
Shutdown
Tapping on Shutdown displays options for a shutdown.
Suspends the unit immediately – equivalent to turning the unit off.
Resets the unit, leaving all saved files and
(registry) settings intact. Unsaved data is lost.
Resets the unit. Files stored outside of permanent memory are lost.
Note: This menu varies depending on the security level. At User level, the Shutdown sub-menu is replaced with a single option
– Suspend . A sub-menu is not available.
Teklogix security level provides another option – Bootloader .
This option behaves like cold-reset, except that the unit launches Bootloader rather than Windows CE .NET.
3.5 Using A Dialogue Box
Tabs
Radio Button
Textbox
Dropdown
Menu
Button
Checkbox
26 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Note: Tap the stylus on a dialogue box element to select or deselect it, display a dropdown menu and so on. To use the keyboard, refer to
“Navigating Using The Keyboard” on page 19.
Dialogue boxes like the samples in this section contain one or more of the following elements:
Tab: Tabs separate different elements of a dialogue box. Tap the stylus on the tab with which you want to work.
Textbox: A textbox requires that you type information. Tap on the textbox you want to work with to highlight it, and then type the appropriate information.
Dropdown: This type of menu is identified by up and down arrows next to the dropdown menu to indicate that additional options are available. Tap on the menu to highlight it, and tap on the arrows attached to the menu to cycle through the options.
Checkbox: This box allows you to select or deselect an option. To select (
√
) or deselect a checkbox, tap the stylus in the checkbox.
Radio buttons: These buttons allow you to choose from a number of options. For example, in the sample screen under
on page 26 , you can choose to
‘Obtain an IP address via DHCP’ or ‘Specify an
IP address’. Tap on a radio button to activate the option next to it.
Buttons: This type of button allows you to ‘Save’, ‘Delete’ and so on the options you’ve chosen in a dialogue box. Tap on the button you want to execute.
Saving Your Choices: Once you’ve made all your changes, tap on the < OK> button to save your changes and exit the window.
Note: If an item in a dialogue box is displayed in grey text, the item is not currently available.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 27
4. General Maintenance
4.1 Caring For The Touchscreen
The touchscreen can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic or crack the internal conductive coating.
Protect the touchscreen from the following chemicals:
• mustard,
• sodium hydroxide,
• concentrated caustic solutions,
• benzyl alcohol, and
• concentrated miner acids.
If touchscreens are used in harsh environments, apply disposable screen protectors to dramatically extend the life of the touchscreen.
4.2 Cleaning The WORKABOUT PRO
Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent to wipe the unit clean.
• Use only mild detergent or soapy water to clean the unit.
• Avoid abrasive cleaners, solvents or strong chemicals. The plastic case is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions.
• To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.
28 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
5. Support Services & Worldwide
Offices
Psion Teklogix provides a complete range of product support services to its customers worldwide.
5.1 Technical Support
Technical Support for Mobile Computing Products is provided via e-mail through the Psion Teklogix customer and partner extranets.
To reach the website, go to www.psionteklogix.com and click on the appropriate Teknet link on the home page. Then click on the
“Log-in” button or the “Register” button, depending on whether you have previously registered for Teknet. Once you have logged in, search for the “Support Request Form”.
5.2 Product Repairs
International
For product repairs, please contact your local Psion Teklogix office
(see
“Worldwide Offices” on page 30).
Canada/U.S.A
Canadian and U.S. customers can receive access to repair services, by calling the toll-free number below, or via our secure website (see
Technical Support, above).
Note: Customers calling the toll-free number should have their
Psion Teklogix customer number or trouble ticket number available.
Voice:1 800 387-8898 (press option “2”)
Fax:1 905 812-6304
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 29
5.3 Worldwide Offices
C OMPANY H EADQUARTERS A ND
C ANADIAN S ERVICE C ENTRE
Psion Teklogix Inc.
2100 Meadowvale Blvd.
Mississauga, Ontario
Canada L5N 7J9
Tel: +1 905 813 9900
Fax: +1 905 812 6300
E-mail: [email protected]
N ORTH A MERICAN
H EADQUARTERS A ND U.S.
S ERVICE C ENTRE
Psion Teklogix Corp.
1810 Airport Exchange Boulevard
Suite 500
Erlanger, Kentucky
USA 41018
Tel: +1 859 371 6006
Fax: +1 859 371 6422
E-mail: [email protected]
I NTERNATIONAL S UBSIDIARIES
Psion Teklogix GmbH
Jakob Kaiser Straße 3
D-47877 Willich Münchheide
Deutschland
Tel: +49 2154 9282 0
Fax: +49 2154 9282 59
E-mail: [email protected]
Psion Teklogix Danmark
Vesterballevej 4-6
7000 Fredericia
Danmark
Tel: +45 76 24 0133
Fax: +45 75 94 4679
E-mail: [email protected]
Psion Teklogix S.A.
La Duranne
135 Rue Rene Descartes
BP 421000
13591 Aix-En-Provence
Cedex 3; France
Tel: +33 4 42 90 88 09
Fax: +33 4 42 90 88 88
E-mail: [email protected]
Psion Teklogix AB
Stora Badhusgatan 18-20
411 21 Göthenburg, Sweden
Tel: +46 31 13 15 50
Fax: +46 31 13 57 80
E-mail: [email protected]
30 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Psion Teklogix (UK) Ltd.
Bourne End Business Centre
Cores End Road
Bourne End
Buckinghamshire SL8 5AR, England
Tel: +44 1628 648800
Fax: +44 1628 648810
WWW: www.teklogix.co.uk
E-mail: [email protected]
Psion Teklogix Finland
Metsänneidonkuja 8
02130 Espoo
Finland
Tel:
Fax:
+358 9 4307 8390
+358 9 4307 8395
E-mail: [email protected]
Psion Teklogix de Mexico, S.A. de C.V.
Sierra Mojada 626, 2º Piso
Col. Lomas Barrilaco, C.P. 11010
Mexico, D.F., Mexico
Tel.: +5255 5 202 6802/6950
Fax: +5255 5 202 4505
E-mail: [email protected]
Psion Teklogix Benelux
Nieuwe weg 1,
2070 Zwijndrecht
Belgium
Tel: +32 3 250 22 00
Fax: +32 3 250 22 20
E-mail: [email protected]
Psion Teklogix Italia S.r.I
Via Galilei, 47
20092 Cinisello Balsamo
Milan, Italy
Tel:
Fax:
+39 02 6604 5410
+39 02 6604 5412
E-mail: [email protected]
Psion Teklogix España, S.L.
Cityparc Ronda de Dalt
Ctra. Hospitalet 147-149
Edificio Atenas 2˚ 3ª
08940 Cornellà de Llobregat (Barcelona)
España
Tel: +34 9 3475 0220
Fax: +34 9 3475 0230
E-mail: [email protected]
Psion Asia Pacific Pte. Ltd.
210 South Bridge Road
#03-01 Singapore 058759
Tel: +65 673 58108
Fax: +65 673 35990
E-mail: [email protected]
Psion Teklogix B.V.
Venrayseweg 57,
5928 NZ Venlo
Nederlands
Tel: +31 77 32400 44
Fax: +31 77 32400 53
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 31
Psion Teklogix Africa
Postnet Suite 39, Private Bag x11
Halfwayhouse, 1685 Ground Floor
East
Waterfall Edge Phase 2, Waterfall
Park
Bekker Road MIDRAND 1685
South Africa
Tel: +27 11 805 7440/1/2
Fax: +27 11 805 7444
Psion Teklogix Systems India
Pvt. Ltd.
M-74, 1st Floor, “M” Block Market
Greater Kailash-Il
New Delhi - 110048
India
Tel:
Fax:
+91 11 26219257
+91 11 26219076
E-mail: [email protected]
Psion Teklogix Wireless Technologies (Shanghai) Ltd.
Unit 1507-08
Mingshen Building
No.3131 Kai Xuan Rd
Shanghai 200030
China
Tel: +86 21 5407 1991
Fax: +86 21 5407 1992
Psion Teklogix Taiwan Co., Ltd.
15FL-5, No. 366 Boai 2nd Road,
Tzuo Ying District, KAOHSIUNG 813
Taiwan, R.O.C.
Tel: +886 7 558 2028
Fax: +886 7 558 3328
E-mail: [email protected]
5.4 World Wide Web
www.psionteklogix.com
32 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Approvals
Declaration Of Conformity
Product: 7525 WORKABOUT PRO
Application of Council R&TTE Directive: 1999/5/EEC
Directive(s): EMC Directive: 89/336/EEC
Low Voltage Directive: 73/23/EEC
Conformity Declared to Standards:
ETSI EN 300 328-2
ETSI EN 301 489-17
EN 55022: 1998 Class B;
EN 61000-3-2; EN 61000-3-3
EN 55024:1998;
EN 60950: 2000
EN 60825-1: 2001 Class 2 Laser Product
Manufacturer: ASKEY COMPUTER CORP.
10F, NO. 119, ChienKang Rd., Chung-Ho,
Taipei, Taiwan, R.O.C.
Manufacturer s Address PSION TEKLOGIX S.A.
in the European La Duranne; 135 Rue Rene Descartes; BP 421000
Community: 13591 Aix-En-Provence
Cedex 3; France
Year of Manufacture: 2004
Type of Equipment:
Equipment Class:
Information Technology Equipment
Commercial and Light Industrial
I the undersigned hereby declare that the equipment specified above conforms to the above directives and standards.
Manufacturer: Legal Representative in Europe:
Signature
John Chiou
Full Name
Signature
Dominique Binckly
Full Name
Product Certification Manager
Position
Vice President International Sales
Position
ASKEY COMPUTER, TAIPEI PSION TEKLOGIX S.A. France
Place Place
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 33
FCC DECLARATION OF CONFORMITY (DoC)
Applicant s Name & Address: ASKEY COMPUTER CORP.
10F, NO. 119, ChienKang Rd., Chung-Ho,
Taipei, Taiwan, R.O.C.
Contact Person: Piyang Chiang
Telephone No.:(510) 440-8694
47849 FREMONT BLVD. FREMONT,
CA, 94538, USA
US Representative s Name & Address: 1810 Airport Exchange Blvd., Suite 500
Erlanger, KY, 41018, USA
Contact Person: Kyle Day
Telephone No.: (859) 372-4329
Equipment Type/Environment:
Trade Name / Model No.:
Year of Manufacture:
Computing Devices
WORKABOUT PRO, Model 7525
2004
Standard(s) to which Conformity is Declared:
The WORKABOUT PRO, model 7525, supplied by Askey Computer Corp., has been tested and found to comply with FCC PART 15, SUBPART B - UNINTENTIONAL
RADIATORS, CLASS B COMPUTING DEVICES FOR HOME & OFFICE
USE .
I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units.
Applicant
Signature
Piyang Chiang
Full Name
Legal Representative in U.S.
Signature
Kyle Day
Full Name
General Manager
Position
Askey International Corp
Place
February 4, 2004
Date
V.P. Channel Sales
Position
Erlanger, KY 41018, USA
Place
February 4, 2004
Date
34 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Safety Summary
This equipment complies with Class B Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Psion Teklogix, the party responsible for compliance, may void the user's authority to operate the equipment.
1. FCC Information to Users
For Class B Unintentional Radiators:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between he equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 35
2. Warning to Users
Warning: Changes or modifications not expressly approved by Psion
Teklogix Inc. could void the user's authority to operate the equipment.
This product complies with 21 CFR 1040.10, 1040.11 Class II and
EN 60825-1: 2001, Class 2 laser product.
L ASER W ARNINGS
For your own safety, it is critical that you comply with the following warnings:
C AUTION
Do not look into the laser beam or point the beam at people or animals.
C AUTION
Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure.
C AUTION
The use of optical instruments with this product will increase eye hazard.
This product may contain a laser scanner that emits less than 1.2 mW maximum radiant power at a wavelength of 650nm or
680nm. This product complies with 21 CFR 1040.10, 1040.11 and DIN EN 60825-1: 2001, and is classified as a Class 2 laser product.
The SE1200 ALR has an maximum radiated power less than 1.4 mW.
36 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
D O N OT O PERATE I N A N E XPLOSIVE A TMOSPHERE
Operating Psion Teklogix equipment where explosive gas is present may result in an explosion.
D O N OT R EMOVE C OVERS O R O PEN E NCLOSURES
To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed.
C AUTION !
Danger of explosion if a battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the instructions listed under the heading
Battery” on page 7. Carefully review all battery safety issues.
V ORSICHT !
Explosiongefahr bei unsachgemäßem Austausch der Batterie
Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 37
Program License Agreements
Microsoft's End User License Agreement
You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”),
DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY
CONTACT PSION TEKLOGIX INC. FOR INSTRUCTIONS ON RETURN OF THE
UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE,
INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTI-
TUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY
PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
• You may use the SOFTWARE only on the DEVICE.
• NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT.
PSION TEKLOGIX INC. HAS INDEPENDENTLY DETERMINED HOW
TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED
UPON PSION TEKLOGIX INC. TO CONDUCT SUFFICIENT TESTING
TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
• NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided
“AS IS” and with all faults. THE ENTIRE RISK AS TO SATISFACTORY
QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUD-
ING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT
OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE
RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE
SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND
ARE NOT BINDING ON, MS.
• Note on Java Support. The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of
Java technology could lead directly to death, personal injury, or severe physical or environmental damage. Sun Microsystems, Inc. has contractually obligated
MS to make this disclaimer.
• No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW,
MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL,
38 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE
SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REM-
EDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL
MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUN-
DRED FIFTY DOLLARS (U.S.$250.OO).
• Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
• SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.
You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this
EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.
• EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S.
Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information see http://www.microsoft.com/exporting/.
Meetinghouse Data Communications, Inc. End User License Agreement
End User License Agreement:
ATTENTION: PLEASE READ THIS SOFTWARE LICENSE AGREEMENT
("LICENSE") CAREFULLY BEFORE INSTALLATION. USE OF THE SOFTWARE
IS SUBJECT TO THE SOFTWARE LICENSE TERMS SET FORTH BELOW.
USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE
TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS, YOU MUST
RETURN THE SOFTWARE FOR A FULL REFUND. IF THE SOFTWARE IS SUP-
PLIED WITH ANOTHER PRODUCT, YOU MAY RETURN THE ENTIRE UNUSED
PRODUCT FOR A FULL REFUND.
Software License Terms:
The following terms govern your use of the enclosed Software unless you have a separate written agreement with Meetinghouse Data Communications, Inc. herein also known as “MDC”.
License Grant:
MDC grants you a non-exclusive and non-transferable license to Use one copy of the
Software. "Use" means storing, loading, installing, executing or displaying the Software.
“Software” means software, documentation and any fonts accompanying this License whether on disk, in read only memory, on any other media or in any other form. You may not modify the Software or disable any licensing or control features of the Software. If the Software is licensed for "concurrent use", you may not allow more than the maximum number of authorized users to Use the Software concurrently.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 39
The Software is licensed as a "Shareware" version, on one computer only. You may use the Software distributed and licensed as Shareware on a trial basis only. The shareware version of the Software may be distributed freely without any associated fees to other parties who wish to try the software as long as the Software is distributed within an exact copy of the original MDC self-extracting installation file. In other words, nothing may be left out of the Shareware as distributed on MDC's web site at http:// www.mtghouse.com.
All permanent licenses are prepaid and the Software is licensed to you by MDC. You own the media on which the Software is recorded but MDC and/or MDC’s licensor(s) retain title to the Software. The Software and any copies which this License authorizes you to make are subject to this License.
Permitted Uses and Restrictions:
This License allows you to install and use the Software on a single computer at a time.
This License does not allow the Software to exist on more than one computer at a time.
You may make one copy of the Software in machine-readable form for backup purposes only. The backup copy must include all copyright information contained on the original.
Except as expressly permitted in this License, you may not, in whole or part, decompile, reverse engineer, disassemble, modify, rent, lease, loan, sublicense, distribute or create derivative works based upon the Software, or transmit the Software over a network. You may not copy the Software onto any bulletin board or similar system. You agree that you will not utilize any information obtained from MDC or obtained or learned in the course of using the Software, to develop or improve technology with similar functionality to the
Software, nor will you directly or indirectly assist any other party in doing so. You further agree that you will not separate the various modules of the software for their different purposes, if any.
High Risk Activities:
The Software is not fault-tolerant and is not designed, manufactured or intended for use or resale as on-line control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Software could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities"). Accordingly, MDC and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk
Activities. You agree that MDC and its suppliers will not be liable for any claims or damages arising from the use of the Software in such applications.
Ownership:
The Software is licensed, not sold. The Software is owned and copyrighted by MDC or its third party suppliers. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software. You acknowledge such ownership and intellectual property rights and will not take any action to jeopardize, limit or interfere in any manner with MDC's or its suppliers' ownership of or rights with respect to the Software.
40 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
The Software is protected by copyright and other intellectual property laws and by international treaties. MDC's third party suppliers may protect their rights in the event of any violation of these License Terms.
Termination:
Your rights under this License will terminate automatically without notice from MDC if you fail to comply with any term(s) of this License. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
U.S. Government Restricted Rights:
The Software and documentation have been developed entirely at private expense and are provided as "Commercial Computer Software" or "restricted computer software".
They are delivered and licensed as "commercial computer software" as defined in
DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991) or DFARS
252.227-7014 (Jun 1995), as a "commercial item" as defined in FAR 2.101 (a), or as
"Restricted computer software" as defined in FAR 52.227-19 (Jun 1987) (or any equivalent agency regulation or contract clause), whichever is applicable. You have only those rights provided for such Software and Documentation by the applicable FAR or DFARS clause or the MDC standard software agreement for the product.
Export Law Assurances:
You may not use or otherwise export or reexport the Software except as authorized by
United States law and the laws of the jurisdiction in which the Software was obtained. In particular, but without limitation, the Software may not be exported or reexported (i) into (or to a national or resident of) any U.S. embargoed country or (ii) to anyone on the
U.S. Treasury Department's list of Specially Designated Nationals or the U.S. Department of Commerce's Table of Denial Orders. By using the Software, you represent and warrant that you are not located in, under control of, or a national or resident of any such country or on any such list.
Limited Warranty on Media: (if applicable)
MDC warrants the media on which the Software is recorded to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of original retail purchase. Your exclusive remedy under this paragraph shall be, at
MDC's option, a refund of the purchase price of the product containing the Software or replacement of the Software which is returned to MDC or a MDC authorized representative with a copy of the receipt. THIS LIMITED WARRANTY AND ANY IMPLIED
WARRANTIES ON THE MEDIA INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIM-
ITED IN DURATION TO NINETY (90) DAYS FROM THE DATE OF ORIGINAL
RETAIL PURCHASE. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THIS LIMITATION MAY
NOT APPLY TO YOU. THE LIMITED WARRANTY SET FORTH HEREIN IS
EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN,
EXPRESS OR IMPLIED. LICENSOR SPECIFICALLY DISCLAIMS ALL OTHER
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 41
WARRANTIES. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY BY
JURISDICTION.
Disclaimer of Warranty on Software:
You expressly acknowledge and agree that use of the Software is at your sole risk. The
Software is provided "AS IS" and without warranty of any kind and MDC and MDC’s licensor(s) (for the purposes of warranty and liability, MDC and MDC's licensor(s) shall be collectively referred to as "MDC") EXPRESSLY DISCLAIM ALL WARRANTIES
AND/OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIM-
ITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MER-
CHANTABILITY OR SATISFACTORY QUALITY AND FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY
RIGHTS. LICENSOR DOES NOT WARRANT THAT THE FUNCTIONS CON-
TAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT
THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR
ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED.
FURTHERMORE, LICENSOR DOES NOT WARRANT OR MAKE ANY REPRE-
SENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE
SOFTWARE OR RELATED DOCUMENTATION IN TERMS OF THEIR COR-
RECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRIT-
TEN INFORMATION OR ADVICE GIVEN BY LICENSOR OR AN LICENSOR
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY
WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE SOFTWARE
PROVE DEFECTIVE, YOU (AND NOT LICENSOR OR AN LICENSOR AUTHOR-
IZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE
EXCLUSION MAY NOT APPLY TO YOU. THE TERMS OF THIS DISCLAIMER
DO NOT AFFECT OR PREJUDICE THE STATUTORY RIGHTS OF A CONSUMER
ACQUIRING LICENSOR PRODUCTS OTHERWISE THAN IN THE COURSE OF
A BUSINESS, NEITHER DO THEY LIMIT OR EXCLUDE ANY LIABILITY FOR
DEATH OR PERSONAL INJURY CAUSED BY LICENSOR’S NEGLIGENCE.
Limitation of Liability:
UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT PROHIBITED BY
LOCAL LAW, INCLUDING NEGLIGENCE, SHALL LICENSOR, ITS SUBSIDIARIES,
AFFILIATES, OR SUPPLIERS BE LIABLE FOR ANY DIRECT, INCIDENTAL, SPE-
CIAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFIT,
LOST DATA, OR DOWNTIME COSTS) ARISING OUT OF OR RELATING TO THIS
LICENSE, THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE
SOFTWARE, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER
LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF
42 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
SUCH DAMAGES. In no event shall MDC's total liability to you for all damages exceed the price paid for the license to use the Software, regardless of the form of the claim.
Government End Users:
If the Software is supplied to the United States Government, the Software is classified as
"restricted computer software" as defined in clause 52.227-19 of the FAR. The United
States Government's rights to the Software are as provided in clause 52.227-19 of the FAR.
Controlling Law and Severability:
This License shall be governed by the laws of the United States and the State of New
Hampshire. As to any dispute relating to this License or the Software, you further agree to jurisdiction and venue in the Federal and State Courts located in the State of New
Hampshire. If for any reason a court of competent jurisdiction finds any provision, or portion thereof, to be unenforceable, the remainder of this License shall continue in full force and effect.
Acknowledgement:
Your use of any software produced by MDC is based only on your acknowledgement that you have read this License, understand it, and agree to be bound by its terms and conditions.
MDC Acknowledgments:
This product includes software developed by MDC and its licensors. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)". This product includes cryptographic software written by
Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]).
Complete Agreement:
This License constitutes the entire agreement between the parties with respect to the use of the Software and supersedes all prior or contemporaneous understandings regarding such subject matter. No amendment to or modification of this License will be binding unless in writing and signed by MDC.
Note: EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WAR-
RANTY TERMS DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN
ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO
THE LICENSE OF THE SOFTWARE TO YOU.
Meetinghouse Data Communications, Inc.
150 Greenleaf Avenue, Unit F
Portsmouth, NH 03801
Revised 8/12/2002
5207-005160
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 43
Atsisiųsti
Vieša nuoroda atnaujinta
Vieša nuoroda į jūsų pokalbį buvo atnaujinta. You may view and manage your chat links after registration here.
Dokumento vieša nuoroda
Reklama
