Psion Teklogix WORKABOUT PRO M/C Hand-Held Computer User Manual
Below you will find brief information for Hand-Held Computer WORKABOUT PRO M/C. The WORKABOUT PRO M/C is a rugged and versatile hand-held computer designed for use in a variety of environments. It features a bright, easy-to-read display and a full QWERTY keyboard, making it easy to use for data entry and other tasks.
Advertisement
Advertisement
WORKABOUT PRO M/C
Hand-Held Computer
User Manual
August 6, 2004 Part No. 8000024.B
I
SO 9001 Certified
Quality Management System
© Copyright 2004 by Psion Teklogix Inc., Mississauga, Ontario
This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are the property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix warrants a return-to-factory warranty for a period of one year. In some regions, the warranty exceeds this period. Please contact your local Psion Teklogix office for details. For a list of offices, see Appendix A: Support Services And
Worldwide Offices . The warranty on Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization.
See Psion Teklogix terms and conditions of sale for full details.
Service
When requesting service, please provide information concerning the nature of the failure and the manner in which the equipment was used when the failure occurred.
Type, model, and serial number should also be provided. Before returning any products to Psion Teklogix, please call the Customer Services Group for a Return Authorization number.
Support Services
Psion Teklogix provides a complete range of product support services to its customers. For detailed information, please refer to Appendix A: Support Services And
Worldwide Offices . This section also provides information about accessing support services through the Psion Teklogix web site.
Disclaimer
Every effort has been made to make this material complete, accurate, and up-to-date.
Psion Teklogix Inc. reserves the right to make changes without notice and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but not limited to typographical errors.
T
ABLE OF
C
ONTENTS
Program License Agreements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
Approvals And Safety Summary
. . . . . . . . . . . . . . . . . . . . . . . . . . . IX
Chapter 1: Introduction
1.1
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2
Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3
About The WORKABOUT PRO Hand-Held Computer . . . . . . . . . 4
1.3.1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.2 The WORKABOUT PRO Hand-Held Computer . . . . . . . . . 9
1.3.3 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . .10
Chapter 2: Basic Checkout
2.1
Preparing The WORKABOUT PRO For Operation . . . . . . . . . . .15
2.1.1 The Main Battery. . . . . . . . . . . . . . . . . . . . . . . . . .15
2.1.2 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . .15
2.1.3 The Internal Battery . . . . . . . . . . . . . . . . . . . . . . . .15
2.2
Turning The WORKABOUT PRO On and Off. . . . . . . . . . . . . .15
2.2.1 Installing The Battery And Switching The Unit On . . . . . . . .15
2.2.2 Switching The Unit Off (Suspend). . . . . . . . . . . . . . . . .16
2.3
Connecting The WORKABOUT PRO To A PC . . . . . . . . . . . . .16
2.3.1 Using Microsoft® ActiveSync® To Work With Files. . . . . . .16
2.4
Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . . .17
2.5
Resetting The WORKABOUT PRO Hand-Held . . . . . . . . . . . . .17
Chapter 3: Getting To Know The WORKABOUT PRO
3.1
Features Of The WORKABOUT PRO . . . . . . . . . . . . . . . . . .21
3.2
The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
3.2.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual i
Contents
3.2.2 Removing And Installing The Battery Pack . . . . . . . . . . . 23
3.2.3 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . 24
3.3
Switching The Hand-Held On And Off . . . . . . . . . . . . . . . . . 25
3.4
The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.4.1 Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.4.1.1
Activating Modifier Keys. . . . . . . . . . . . . . . . 27
3.4.1.2
Locking Modifier Keys. . . . . . . . . . . . . . . . . 27
3.4.2 The Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.4.3 The Keypad Backlight . . . . . . . . . . . . . . . . . . . . . . 29
3.5
The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.5.1 Colour Display . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.5.2 Monochrome Display . . . . . . . . . . . . . . . . . . . . . . . 30
3.5.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . 30
3.6
Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.6.1 The LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.6.2 Onscreen Indicators . . . . . . . . . . . . . . . . . . . . . . . . 32
3.6.3 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.6.3.1
Adjusting The Speaker Volume . . . . . . . . . . . . 35
3.7
Monitoring The Battery And Maximizing Run Time . . . . . . . . . . 35
3.7.1 Storing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.8
Uploading Data In A Docking Station . . . . . . . . . . . . . . . . . . 36
3.9
Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.10 The SD/MMC Card – Adding Memory . . . . . . . . . . . . . . . . . 37
3.10.1 Inserting The Card . . . . . . . . . . . . . . . . . . . . . . . . 37
3.11 General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.11.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . 39
3.11.2 Cleaning The WORKABOUT PRO . . . . . . . . . . . . . . . 39
Chapter 4: Working With Windows CE .NET
4.1
Navigating In Windows CE .NET And Applications . . . . . . . . . . 43
4.1.1 Navigating Using A Touchscreen And Stylus . . . . . . . . . . 43
4.1.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . 43
4.2
Working With Files, Folders And Programs . . . . . . . . . . . . . . . 44
4.3
The Startup Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.3.1 The Desktop Icons . . . . . . . . . . . . . . . . . . . . . . . . 45
4.3.2 The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ii Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Contents
4.3.2.1
Using The Taskbar . . . . . . . . . . . . . . . . . . . .46
4.3.2.2
Customizing The Taskbar . . . . . . . . . . . . . . . .46
4.4
The Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
4.4.1 The Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
4.4.2 Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . .48
4.4.3 The System Tray . . . . . . . . . . . . . . . . . . . . . . . . . .49
4.4.4 The Task Manager . . . . . . . . . . . . . . . . . . . . . . . . .50
4.4.5 Cycle Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.4.6 Power Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
4.4.7 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4.4.8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
4.4.9 Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
4.4.10 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
4.5
Using A Dialogue Box . . . . . . . . . . . . . . . . . . . . . . . . . .55
Chapter 5: Configuration
5.1
Remote Desktop Connection . . . . . . . . . . . . . . . . . . . . . . .59
5.2
Pocket PC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . .59
5.3
The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
5.4
Control Panel Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
5.5
Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
5.5.1 Display Properties . . . . . . . . . . . . . . . . . . . . . . . . .64
5.5.1.1
Display Contrast . . . . . . . . . . . . . . . . . . . . .64
5.5.1.2
Display Backlight . . . . . . . . . . . . . . . . . . . .65
5.5.1.3
Display Appearance . . . . . . . . . . . . . . . . . . .66
5.5.2 Keyboard Properties . . . . . . . . . . . . . . . . . . . . . . . .67
5.5.2.1
Key Repeat. . . . . . . . . . . . . . . . . . . . . . . .67
5.5.2.2
Keyboard Backlight . . . . . . . . . . . . . . . . . . .68
5.5.2.3
Keyboard One Shot Modes . . . . . . . . . . . . . . .69
5.5.2.4
Keyboard Macro Keys . . . . . . . . . . . . . . . . . .70
5.5.2.5
Unicode Mapping . . . . . . . . . . . . . . . . . . . .71
5.5.3 Volume And Sound Properties. . . . . . . . . . . . . . . . . . .73
5.5.3.1
Volume Adjustments . . . . . . . . . . . . . . . . . . .73
5.5.4 Power Management Properties. . . . . . . . . . . . . . . . . . .74
5.5.4.1
Battery Capacity . . . . . . . . . . . . . . . . . . . . .74
5.5.4.2
Power Saving Schemes . . . . . . . . . . . . . . . . .75
5.5.5 Stylus Properties . . . . . . . . . . . . . . . . . . . . . . . . . .76
5.5.5.1
Setting Double-Tap Sensitivity . . . . . . . . . . . . .76
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual iii
Contents
5.5.5.2
Touchscreen Calibration . . . . . . . . . . . . . . . . 77
5.5.5.3
Touchscreen Options . . . . . . . . . . . . . . . . . . 77
5.5.6 Certificate Assignment . . . . . . . . . . . . . . . . . . . . . . 77
5.6
Bluetooth Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
5.6.1 The Devices Tab . . . . . . . . . . . . . . . . . . . . . . . . . 79
5.6.2 The Server Tab . . . . . . . . . . . . . . . . . . . . . . . . . . 82
5.6.3 The Property Tab . . . . . . . . . . . . . . . . . . . . . . . . . 83
5.6.4 The Bluetooth GPRS Phone . . . . . . . . . . . . . . . . . . . 84
5.7
SNMP (Simple Network Management Protocol) Setup . . . . . . . . . 90
5.7.1 Contact Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
5.7.2 Communities Tab . . . . . . . . . . . . . . . . . . . . . . . . . 92
5.7.2.1
Adding A Community . . . . . . . . . . . . . . . . . 93
5.7.2.2
Modifying A Community Setting . . . . . . . . . . . 94
5.7.2.3
Removing An Existing Community . . . . . . . . . . 94
5.7.3 Trap Destination Tab . . . . . . . . . . . . . . . . . . . . . . . 95
5.7.3.1
Enabling Authentication TRAPS. . . . . . . . . . . . 95
5.7.3.2
Adding A Destination . . . . . . . . . . . . . . . . . 95
5.7.3.3
Changing A Destination . . . . . . . . . . . . . . . . 96
5.7.3.4
Removing A Trap Destination . . . . . . . . . . . . . 96
5.7.4 Permitted Hosts Tab . . . . . . . . . . . . . . . . . . . . . . . 97
5.7.4.1
Adding A Host . . . . . . . . . . . . . . . . . . . . . 97
5.7.4.2
Changing A Host . . . . . . . . . . . . . . . . . . . . 98
5.8
Total Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.8.1 Creating A Backup Profile . . . . . . . . . . . . . . . . . . . . 99
5.8.2 Restoring A Profile . . . . . . . . . . . . . . . . . . . . . . . .102
5.9
APN Manager Settings . . . . . . . . . . . . . . . . . . . . . . . . .102
5.9.1 Automatic GSM Setup – Connecting To The Network . . . . .102
5.9.2 Manual GSM Setup – APN Settings Manager . . . . . . . . . .103
5.9.3 PIN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Chapter 6: Connecting To A LAN With 802.11b
6.1
Installing The 802.11b Radio . . . . . . . . . . . . . . . . . . . . . .109
6.2
Connecting To A LAN Using An 802.11b Radio . . . . . . . . . . . .111
6.2.1 Configuring An IEEE 802.11b Radio . . . . . . . . . . . . . .111
6.2.2 Assigning An IP Address . . . . . . . . . . . . . . . . . . . . .117
6.2.3 Name Servers Tab . . . . . . . . . . . . . . . . . . . . . . . .118
6.2.4 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . .118
iv Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Contents
6.2.4.1
Rearranging Preferred Networks . . . . . . . . . . . 119
6.2.4.2
Deleting A Preferred Network . . . . . . . . . . . . . 119
6.2.4.3
Changing Network Properties . . . . . . . . . . . . . 119
Chapter 7: Expansion Modules
7.1
Expansion Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
7.1.1 Removing The End-Cap And Back Plate . . . . . . . . . . . . 123
7.1.2 What’s Inside. . . . . . . . . . . . . . . . . . . . . . . . . . . 124
7.1.3 Shutting Off Power. . . . . . . . . . . . . . . . . . . . . . . . 125
7.1.4 Installing The PCMCIA Module . . . . . . . . . . . . . . . . . 125
7.1.5 Installing A GSM/GPRS Module . . . . . . . . . . . . . . . . 127
7.1.6 Installing An SE 1223HP Scanner . . . . . . . . . . . . . . . . 128
Chapter 8: Peripheral Devices & Accessories
8.1
Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 133
8.1.1 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . 133
8.1.2 Attaching The Pistol Grip . . . . . . . . . . . . . . . . . . . . 135
8.1.3 Protective Carrying Case . . . . . . . . . . . . . . . . . . . . . 136
8.1.3.1
Using The Swivel Belt Loop With The Carrying Case 137
8.1.4 Soft Shell Holster. . . . . . . . . . . . . . . . . . . . . . . . . 139
8.2
The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
8.2.1 Lithium Ion Battery Safety Precautions . . . . . . . . . . . . . 140
8.3
Chargers And Docking Stations . . . . . . . . . . . . . . . . . . . . . 141
8.3.1 Installation – Chargers And Docking Stations . . . . . . . . . . 142
8.3.2 Power Consumption Considerations . . . . . . . . . . . . . . . 142
8.3.3 Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . 142
8.3.4 Important Charger Safety Instructions . . . . . . . . . . . . . . 142
8.4
Desktop Docking Station – Model #WA4002 . . . . . . . . . . . . . 144
8.4.1 Charging A Battery Installed In The WORKABOUT PRO . . . 145
8.4.2 Charging A Spare Battery . . . . . . . . . . . . . . . . . . . . 145
8.4.3 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . 145
8.4.4 Charger LED Indicators . . . . . . . . . . . . . . . . . . . . . 145
8.4.5 Troubleshooting The Charging Operation Of The Dock . . . . 146
8.4.6 Desktop Docking Station Ports . . . . . . . . . . . . . . . . . 146
8.4.7 Linking A WORKABOUT PRO To A PC . . . . . . . . . . . 146
8.4.7.1
Using Microsoft® ActiveSync® To Work With Files . 147
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual v
Contents
8.4.8 Linking A WORKABOUT PRO To An Ethernet Network . . .147
8.4.8.1
Network Access . . . . . . . . . . . . . . . . . . . .148
8.4.9 Troubleshooting The Docking Station Operations . . . . . . . .148
8.5
Single Battery Charger – Model #WA3001 . . . . . . . . . . . . . . .148
8.5.1 Inserting A Battery In The Single Battery Charger. . . . . . . .149
8.5.2 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . .149
8.5.3 Charge Indicators – The LED. . . . . . . . . . . . . . . . . . .149
8.6
Quad Battery Charger – Model #WA3004. . . . . . . . . . . . . . . .150
8.6.1 Charging Batteries . . . . . . . . . . . . . . . . . . . . . . . .150
8.6.2 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . .150
8.6.3 Charge Indicators – The LEDs . . . . . . . . . . . . . . . . . .150
8.6.4 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . .151
8.6.4.1
Excessive Charge Duration. . . . . . . . . . . . . . .151
8.6.4.2
Indicator Flashing Red . . . . . . . . . . . . . . . . .151
8.6.4.3
Power LED Does Not Light Up . . . . . . . . . . . .151
8.6.4.4
Indicator Does Not Light When Battery Installed . . .152
8.7
Quad Docking Station – Model #WA4004 . . . . . . . . . . . . . . .152
8.7.1 Quad Docking Station Setup . . . . . . . . . . . . . . . . . . .153
8.7.2 Quad Indicators . . . . . . . . . . . . . . . . . . . . . . . . . .153
8.7.3 Inserting A WORKABOUT In The Quad Docking Station . . .153
8.7.4 Network Access. . . . . . . . . . . . . . . . . . . . . . . . . .153
8.7.4.1
Network Addressing . . . . . . . . . . . . . . . . . .154
8.7.5 Battery Charging – LED Behaviour . . . . . . . . . . . . . . .154
8.7.6 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . .154
8.7.6.1
Network Link Unsuccessful . . . . . . . . . . . . . .154
8.7.6.2
Hand-Held LED Does Not Light When Docked. . . .154
8.8
AC Wall Adaptor And Tether Cable . . . . . . . . . . . . . . . . . . .155
8.9
Automotive Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . .156
8.10 The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
8.10.1 Vehicle Cradle Mounting Recommendations . . . . . . . . . .157
8.10.1.1 Mounting Template. . . . . . . . . . . . . . . . . . .158
8.10.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . .158
8.10.3 Using The Vehicle Cradle . . . . . . . . . . . . . . . . . . . .158
8.10.4 Maintaining The Vehicle Cradle . . . . . . . . . . . . . . . . .159
8.10.5 Powered Cradle Installation In High Voltage Vehicles . . . . .159
8.10.6 Powered Vehicle Cradle Installation . . . . . . . . . . . . . . .160
8.10.6.1 Wiring Vehicle Power To The Cradle . . . . . . . . .160
vi Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Contents
8.10.7 The Port Replicator. . . . . . . . . . . . . . . . . . . . . . . . 161
8.11 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Chapter 9: Specifications
9.1
Hand-Held Computer Specifications . . . . . . . . . . . . . . . . . . 165
9.2
Radio Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 167
9.3
SE 1223HP Scanner Specifications . . . . . . . . . . . . . . . . . . . 167
9.4
Battery Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 168
9.4.1 Standard Battery Pack . . . . . . . . . . . . . . . . . . . . . . 168
9.4.2 High-Capacity Battery Pack . . . . . . . . . . . . . . . . . . . 169
9.4.3 Maxell ML2032 Rechargeable Coin Battery . . . . . . . . . . 171
Appendix A: Support Services And Worldwide Offices
A.1 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
A.2 Product Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
A.3 Worldwide Offices. . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Appendix B: Port Pinouts
B.1 Standard Battery Contact Pin Definition . . . . . . . . . . . . . . . . B-1
B.2 High-Capacity Battery Contact Pin Definition . . . . . . . . . . . . . B-1
B.3 LIF (Low Insertion Force) Port Pinout . . . . . . . . . . . . . . . . . B-2
B.4 Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
B.5 Audio Mini-Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Appendix C: USB Setup Application
C.1 USB Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
C.1.1
Launching The Application . . . . . . . . . . . . . . . . . . . C-1
C.1.2
Pre-Installation: Updating usbstor.inf And wceusbsh.inf . . . . C-2
C.1.3
Installation: WORKABOUT PRO As A Device On Your PC . C-4
C.1.4
Post Installation . . . . . . . . . . . . . . . . . . . . . . . . . C-5
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual vii
P
ROGRAM
L
ICENSE
A
GREEMENTS
Microsoft's End User License Agreement
You have acquired a device (“DEVICE”) that includes software licensed by Psion
Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed software products of MS origin, as well as associated media, printed materials, and
“online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold.
All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT
(“EULA”), DO NOT USE THE DEVICE OR COPY THE SOFTWARE.
INSTEAD, PROMPTLY CONTACT PSION TEKLOGIX INC. FOR INSTRUC-
TIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY
USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON
THE DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA
(OR RATIFICATION OF ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
• You may use the SOFTWARE only on the DEVICE.
• NOT FAULT TOLERANT . THE SOFTWARE IS NOT FAULT TOLER-
ANT. PSION TEKLOGIX INC. HAS INDEPENDENTLY DETER-
MINED HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS
HAS RELIED UPON PSION TEKLOGIX INC. TO CONDUCT SUFFI-
CIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUIT-
ABLE FOR SUCH USE.
• NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided “AS IS” and with all faults. THE ENTIRE RISK AS TO SATIS-
FACTORY QUALITY, PERFORMANCE, ACCURACY, AND
EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU.
ALSO, THERE IS NO WARRANTY AGAINST INTERFERENCE
WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual I
License Agreement
•
• No Liability for Certain Damages. EXCEPT AS PROHIBITED BY
LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM OR IN CONNECTION WITH THE USE OR PER-
FORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL
APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PUR-
POSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT
IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS
(U.S.$250.OO).
• Limitations on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
•
INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRAN-
TIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.
Note on Java Support . The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java technology could lead directly to death, personal injury, or severe physical or environmental damage. Sun
Microsystems, Inc. has contractually obligated MS to make this disclaimer.
•
SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS.
You may permanently transfer rights under this EULA only as part of a permanent sale or transfer of the Device, and only if the recipient agrees to this
EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the
U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information see http://www.microsoft.com/exporting/.
II Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
License Agreement
Meetinghouse Data Communications, Inc. End User License Agreement
End User License Agreement:
ATTENTION: PLEASE READ THIS SOFTWARE LICENSE AGREEMENT
("LICENSE") CAREFULLY BEFORE INSTALLATION. USE OF THE SOFT-
WARE IS SUBJECT TO THE SOFTWARE LICENSE TERMS SET FORTH
BELOW. USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF
THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE
TERMS, YOU MUST RETURN THE SOFTWARE FOR A FULL REFUND. IF
THE SOFTWARE IS SUPPLIED WITH ANOTHER PRODUCT, YOU MAY
RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND.
Software License Terms:
The following terms govern your use of the enclosed Software unless you have a separate written agreement with Meetinghouse Data Communications, Inc. herein also known as “MDC”.
License Grant:
MDC grants you a non-exclusive and non-transferable license to Use one copy of the Software. "Use" means storing, loading, installing, executing or displaying the
Software. “Software” means software, documentation and any fonts accompanying this License whether on disk, in read only memory, on any other media or in any other form. You may not modify the Software or disable any licensing or control features of the Software. If the Software is licensed for "concurrent use", you may not allow more than the maximum number of authorized users to Use the Software concurrently.
The Software is licensed as a "Shareware" version, on one computer only. You may use the Software distributed and licensed as Shareware on a trial basis only. The shareware version of the Software may be distributed freely without any associated fees to other parties who wish to try the software as long as the Software is distributed within an exact copy of the original MDC self-extracting installation file. In other words, nothing may be left out of the Shareware as distributed on MDC's web site at http://www.mtghouse.com.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual III
License Agreement
All permanent licenses are prepaid and the Software is licensed to you by MDC.
You own the media on which the Software is recorded but MDC and/or MDC’s licensor(s) retain title to the Software. The Software and any copies which this
License authorizes you to make are subject to this License.
Permitted Uses and Restrictions:
This License allows you to install and use the Software on a single computer at a time. This License does not allow the Software to exist on more than one computer at a time. You may make one copy of the Software in machine-readable form for backup purposes only. The backup copy must include all copyright information contained on the original. Except as expressly permitted in this License, you may not, in whole or part, decompile, reverse engineer, disassemble, modify, rent, lease, loan, sublicense, distribute or create derivative works based upon the Software, or transmit the Software over a network. You may not copy the Software onto any bulletin board or similar system. You agree that you will not utilize any information obtained from MDC or obtained or learned in the course of using the Software, to develop or improve technology with similar functionality to the Software, nor will you directly or indirectly assist any other party in doing so. You further agree that you will not separate the various modules of the software for their different purposes, if any.
High Risk Activities:
The Software is not fault-tolerant and is not designed, manufactured or intended for use or resale as on-line control equipment in hazardous environments requiring failsafe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the Software could lead directly to death, personal injury, or severe physical or environmental damage ("High Risk Activities").
Accordingly, MDC and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities. You agree that MDC and its suppliers will not be liable for any claims or damages arising from the use of the Software in such applications.
Ownership:
The Software is licensed, not sold. The Software is owned and copyrighted by MDC or its third party suppliers. Your license confers no title or ownership in the Software and is not a sale of any rights in the Software. You acknowledge such ownership and intellectual property rights and will not take any action to jeopardize, limit or interfere in any manner with MDC's or its suppliers' ownership of or rights with respect
IV Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
License Agreement to the Software. The Software is protected by copyright and other intellectual property laws and by international treaties. MDC's third party suppliers may protect their rights in the event of any violation of these License Terms.
Termination:
Your rights under this License will terminate automatically without notice from
MDC if you fail to comply with any term(s) of this License. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form.
U.S. Government Restricted Rights:
The Software and documentation have been developed entirely at private expense and are provided as "Commercial Computer Software" or "restricted computer software". They are delivered and licensed as "commercial computer software" as defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991) or
DFARS 252.227-7014 (Jun 1995), as a "commercial item" as defined in FAR 2.101
(a), or as "Restricted computer software" as defined in FAR 52.227-19 (Jun 1987)
(or any equivalent agency regulation or contract clause), whichever is applicable.
You have only those rights provided for such Software and Documentation by the applicable FAR or DFARS clause or the MDC standard software agreement for the product.
Export Law Assurances:
You may not use or otherwise export or reexport the Software except as authorized by United States law and the laws of the jurisdiction in which the Software was obtained. In particular, but without limitation, the Software may not be exported or reexported (i) into (or to a national or resident of) any U.S. embargoed country or
(ii) to anyone on the U.S. Treasury Department's list of Specially Designated
Nationals or the U.S. Department of Commerce's Table of Denial Orders. By using the Software, you represent and warrant that you are not located in, under control of, or a national or resident of any such country or on any such list.
Limited Warranty on Media: (if applicable)
MDC warrants the media on which the Software is recorded to be free from defects in materials and workmanship under normal use for a period of ninety (90) days from the date of original retail purchase. Your exclusive remedy under this paragraph shall be, at MDC's option, a refund of the purchase price of the product containing the Software or replacement of the Software which is returned to MDC or a
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual V
License Agreement
MDC authorized representative with a copy of the receipt. THIS LIMITED WAR-
RANTY AND ANY IMPLIED WARRANTIES ON THE MEDIA INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO NINETY (90)
DAYS FROM THE DATE OF ORIGINAL RETAIL PURCHASE. SOME JURIS-
DICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. THE
LIMITED WARRANTY SET FORTH HEREIN IS EXCLUSIVE AND IN LIEU
OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED.
LICENSOR SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES. THIS
LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY BY JURISDICTION.
Disclaimer of Warranty on Software:
You expressly acknowledge and agree that use of the Software is at your sole risk.
The Software is provided "AS IS" and without warranty of any kind and MDC and
MDC’s licensor(s) (for the purposes of warranty and liability, MDC and MDC's licensor(s) shall be collectively referred to as "MDC") EXPRESSLY DISCLAIM
ALL WARRANTIES AND/OR CONDITIONS, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
AND/OR CONDITIONS OF MERCHANTABILITY OR SATISFACTORY
QUALITY AND FITNESS FOR A PARTICULAR PURPOSE AND NONIN-
FRINGEMENT OF THIRD PARTY RIGHTS. LICENSOR DOES NOT WAR-
RANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL
MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFT-
WARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS
IN THE SOFTWARE WILL BE CORRECTED. FURTHERMORE, LICENSOR
DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING
THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE OR
RELATED DOCUMENTATION IN TERMS OF THEIR CORRECTNESS,
ACCURACY, RELIABILITY, OR OTHERWISE. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY LICENSOR OR AN LICENSOR
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN
ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SHOULD THE
SOFTWARE PROVE DEFECTIVE, YOU (AND NOT LICENSOR OR AN
LICENSOR AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WAR-
VI Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
License Agreement
RANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THE
TERMS OF THIS DISCLAIMER DO NOT AFFECT OR PREJUDICE THE
STATUTORY RIGHTS OF A CONSUMER ACQUIRING LICENSOR PROD-
UCTS OTHERWISE THAN IN THE COURSE OF A BUSINESS, NEITHER DO
THEY LIMIT OR EXCLUDE ANY LIABILITY FOR DEATH OR PERSONAL
INJURY CAUSED BY LICENSOR’S NEGLIGENCE.
Limitation of Liability:
UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT PROHIBITED
BY LOCAL LAW, INCLUDING NEGLIGENCE, SHALL LICENSOR, ITS SUB-
SIDIARIES, AFFILIATES, OR SUPPLIERS BE LIABLE FOR ANY DIRECT,
INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
(INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS) ARIS-
ING OUT OF OR RELATING TO THIS LICENSE, THE USE, INABILITY TO
USE, OR THE RESULTS OF USE OF THE SOFTWARE, WHETHER BASED IN
WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND
WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
In no event shall MDC's total liability to you for all damages exceed the price paid for the license to use the Software, regardless of the form of the claim.
Government End Users:
If the Software is supplied to the United States Government, the Software is classified as "restricted computer software" as defined in clause 52.227-19 of the FAR.
The United States Government's rights to the Software are as provided in clause
52.227-19 of the FAR.
Controlling Law and Severability:
This License shall be governed by the laws of the United States and the State of
New Hampshire. As to any dispute relating to this License or the Software, you further agree to jurisdiction and venue in the Federal and State Courts located in the
State of New Hampshire. If for any reason a court of competent jurisdiction finds any provision, or portion thereof, to be unenforceable, the remainder of this License shall continue in full force and effect.
Acknowledgement:
Your use of any software produced by MDC is based only on your acknowledgement that you have read this License, understand it, and agree to be bound by its terms and conditions.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual VII
License Agreement
MDC Acknowledgments:
This product includes software developed by MDC and its licensors. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)". This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim
Hudson ([email protected]).
Complete Agreement:
This License constitutes the entire agreement between the parties with respect to the use of the Software and supersedes all prior or contemporaneous understandings regarding such subject matter. No amendment to or modification of this License will be binding unless in writing and signed by MDC.
NOTE: EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE
WARRANTY TERMS DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND
ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICA-
BLE TO THE LICENSE OF THE SOFTWARE TO YOU.
Meetinghouse Data Communications, Inc.
150 Greenleaf Avenue, Unit F
Portsmouth, NH 03801
Revised 8/12/2002
VIII Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
A
PPROVALS
A
ND
S
AFETY
S
UMMARY
Declaration Of Conformity
7525 WORKABOUT PRO Product:
Application of Council
Directive(s):
Conformity Declared to Standards:
Manufacturer:
Year of Manufacture:
Manufacturer’s Address in the European
Community:
EMC Directive: 89/336/EEC
Low Voltage Directive: 73/23/EEC
EN 55022: 1998 Class B;
EN 61000-3-2; EN 61000-3-3
EN 55024:1998;
EN 61000-4-2; ±4kV CD; ±8kV AD
EN 61000-4-3; 3V/m, 80-1000 MHz
EN 61000-4-4; ±1kV Power lines
EN 61000-4-5; ±1kV Differential mode
EN 61000-4-6; 3VRMS, 150kHz-80MHz
EN 61000-4-11; AC Mains Ports
EN 60950: 2000
IEC 60825-1:1993+A1:1997+A2:2001
ASKEY COMPUTER CORP.
10F, NO. 119, ChienKang Rd., Chung-Ho,
Taipei, Taiwan, R.O.C.
2004
PSION TEKLOGIX S.A.
La Duranne; 135 Rue Rene Descartes; BP 421000
13591 Aix-En-Provence
Cedex 3; France
Information Technology Equipment Type of Equipment:
Equipment Class: Commercial and Light Industrial
I the undersigned hereby declare that the equipment specified above conforms to the above directives and standards.
Manufacturer:
Signature
Legal Representative in Europe:
Signature
John Chiou
Position
Product Certification Manager
Place
ASKEY COMPUTER, TAIPEI
Dominique Binckly
Position
Vice President International Sales
Place
PSION TEKLOGIX S.A. France
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual IX
Approvals And Safety Summary
FCC DECLARATION OF CONFORMITY (DoC)
Applicant’s Name & Address:
US Representative’s Name & Address:
ASKEY COMPUTER CORP.
10F, NO. 119, ChienKang Rd., Chung-Ho,
Taipei, Taiwan, R.O.C.
Contact Person: Piyang Chiang
Telephone No.: (510) 440-8694
47849 FREMONT BLVD. FREMONT,
CA, 94538, USA
PSION TEKLOGIX
1810 Airport Exchange Blvd., Suite 500
Erlanger, KY, 41018, USA
Contact Person: Kyle Day
Telephone No.: (859) 372-4329
Devices
Trade Name / Model No.:
Year of Manufacture:
WORKABOUT PRO, Model 7525
2004
Standard(s) to which Conformity is Declared:
The WORKABOUT PRO, model 7525, supplied by Askey Computer Corp., has been tested and found to comply with FCC PART 15, SUBPART B - UNINTENTIONAL
RADIATORS, CLASS B COMPUTING DEVICES FOR HOME & OFFICE USE.
I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units.
Applicant Legal Representative in U.S.
Signature
Piyang Chiang
Full Name
General Manager
Position
Askey International Corp
Place
Feb. 4, 2004
Date
Signature
Kyle Day
Full Name
V.P. Channel Sales
Position
Erlanger, KY 41018, USA
Place
Feb. 4, 2004
Date
X Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Approvals And Safety Summary
This equipment complies with Class B Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by Psion Teklogix, the party responsible for compliance, may void the user's authority to operate the equipment.
1. FCC Information to Users
For Class B Unintentional Radiators:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
2. Warning to Users
Warning: Changes or modifications not expressly approved by Psion
Teklogix Inc. could void the user's authority to operate the equipment.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual XI
Approvals And Safety Summary
This product complies with CDRH 21 CFR 1040 Class II and IEC 60825-
1:1993+A1:1997+A2:2001 laser product.
L
ASER
W
ARNINGS
For your own safety, it is critical that you comply with the following warnings:
C
AUTION
The laser aperture is located in the front of termnial. Do not look into the laser beam or point the beam at people or animals.
C
AUTION
Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure.
C
AUTION
The use of optical instruments with this product will increase eye hazard.
This product contains a laser scanner that emits less than 1.2 mW maximum radiant power at a wavelength of 650nm to 680nm. This product complies with CDRH 21 CFR 1040 Class II and IEC 60825-
1:1993+A1:1997+A2:2001 Class 2 laser product.
D
O
N
OT
O
PERATE
I
N
A
N
E
XPLOSIVE
A
TMOSPHERE
Operating Psion Teklogix equipment where explosive gas is present may result in an explosion.
D
O
N
OT
R
EMOVE
C
OVERS
O
R
O
PEN
E
NCLOSURES
To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed.
Before removing the cover and enclosures, remove the battery pack at first
XII Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Approvals And Safety Summary
C
AUTION
!
Danger of explosion if a battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the instructions described in “Lithium Ion Battery Safety Precautions” on page 140. Carefully review all battery safety issues.
V
ORSICHT
!
Explosiongefahr bei unsachgemäßem Austausch der Batterie Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen
Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual XIII
I
NTRODUCTION
1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 About The WORKABOUT PRO Hand-Held Computer . . . . . . . . . . . 4
1.3.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.2 The WORKABOUT PRO Hand-Held Computer . . . . . . . . . . . . 9
1.3.3 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 1
Chapter 1: Introduction
About This Manual
1.1 About This Manual
This manual describes how to configure, operate and maintain the WORKABOUT
PRO hand-held computer.
Chapter 1: Introduction provides a basic overview of the WORKABOUT PRO hand-held.
Chapter 2: Basic Checkout describes the steps required to get the unit ready for operation.
Chapter 3: Getting To Know The WORKABOUT PRO describes the features and outlines how to charge and maintain the battery. This chapter also provides indicators, installing a SD/MMC card and general maintenance.
Chapter 4: Working With Windows CE .NET
describes the Microsoft® Windows CE .NET desktop and how to use it. This chapter also outlines the basics of moving around a Windows CE .NET window, selecting and opening icons, files, folders and working with a dialogue box.
Chapter 5: Configuration provides a description of the Windows CE .NET Control Panel and how to use it to configure the WORKABOUT PRO, along with the scanners attached to the hand-held, and so on.
Chapter 6: Connecting To A LAN With 802.11b
describes how to insert and configure an 802.11b radio.
Chapter 7: Expansion Modules provides instructions about installing expansion modules – the PCMCIA module, the GSM/GPRS module and the scanner module.
Chapter 8: Peripheral Devices & Accessories describes the peripherals and accessories available for your hand-held.
Chapter 9: Specifications details radio, hand-held computer, scanner and battery specifications.
Appendix A: Support Services And Worldwide Offices provides the helpdesk phone number at the Mississauga, Ontario, Canada office and details the support services available. This appendix also lists the worldwide office addresses and phone numbers.
Appendix B: Port Pinouts includes port pinouts.
Appendix C: USB Setup Application details how to use the USB Setup application.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 3
Chapter 1: Introduction
Text Conventions
1.2 Text Conventions
Note: Notes highlight additional helpful information.
Important: These statements provide particularly important instructions or additional information that is critical to the operation of the equipment.
Warning: These statements provide critical information that may prevent physical injury, equipment damage or data loss.
1.3 About The WORKABOUT PRO Hand-Held Computer
The WORKABOUT PRO is a ruggedized hand-held personal computer, running the
Microsoft® Windows CE .NET operating system. It is intended for use in commercial and light industrial applications with a focus on real time wireless data transactions. This hand-held is optimized for mobile computing applications and third party expansion. It is available with a monochrome or colour touchscreen.
1.3.1 Features
• Rugged design:
sealed from water and dust to IP54 (light rain) rating.
withstands multiple drops of up to 1.2m (4 ft.) drop to concrete.
• WORKABOUT PRO Model Variants
WORKABOUT PRO M:
Monochrome touchscreen display
32 MB Flash
64 MB RAM
WORKABOUT PRO C:
32 MB Flash
128 MB RAM
4 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 1: Introduction
Features
Integrated Bluetooth
• Processor:
400 MHz Intel Xscale PXA255
• Operating System:
Microsoft Windows CE .NET 4.2
• Programming Environment:
HTML, XML
Psion Teklogix Mobile Devices SDK
HDK - Hardware Development Kit for third-party developed expansion modules.
Compact Framework
java
Standard protocol APIs
Windows sockets (Windows CE .NET)
Psion Teklogix Mobile SDK
• Wireless Communications:
Optional expansion modules for:
802.11b (via expansion interface)
GSM/GPRS (via expansion interface)
CDMA/lxRTT (via expansion interface) (future project)
Internet Bluetooth class II, version 1.1 standard on WORKABOUT
PRO C
Note: WAN, 802.11b and Bluetooth are available simultaneously on
WORKABOUT PRO C units.
• Application Software:
Internet Explorer 6.0 for CE
Open TekTerm (optional)
ANSI, TESS terminal emulations IBM 3270, IBM 5250, HP 2392
(optional)
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 5
Chapter 1: Introduction
Features
• User Interface:
Monochrome Touchscreen Display
3.5 in. (8.9 cm) diagonal, 1/4 VGA 240 x 320 transflective portrait mode LCD
Backlight on/off control, adjustable contrast
Sunlight readable for outdoor use
High reliability EL backlight
Colour Touchscreen Display
3.5 in. (8.9 cm) diagonal 1/4 VGA, 240 x 320 transflective portrait mode TFT
16-bit colour
Adjustable backlight
Sunlight readable for outdoor use
High reliability LED backlight
Touchscreen
Passive stylus or finger operation
Signature capture
Stylus held on main unit
Keyboards
Alphanumeric
Ergonomic ambidextrous one-hand operation
Backlit, high durability hard-capped keys
Indicators and Controls
Internal speaker with volume control
LED indicating battery charge status
• Bar Code Applications:
Optional 2D Imager expansion module*
Optional 1D SE 1223HP laser scanner expansion module*
Optional field-upgradeable/replaceable pistol grip*
* Note: All are field upgradeable
• Expansion Slots:
One SD/MMC memory card slot – user accessible
6 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 1: Introduction
Features
100 Pin High-Speed Expansion connector, accessible through end-cap or back cover
Supports serial, USB, PCMCIA
Type II Compact Flash slot accessible through end-cap
• Other Expansion Modules:
Type II PCMCIA slot – field upgradeable
Third Party accessories
• External Ports:
USB Host port on base of tethered USB devices (printers, etc.)
Low Insertion Force Docking Station Port with:
USB device port
USB Host port
Power
• Power Management:
Lithium Ion 3.7V Standard Battery
Long life Lithium Ion 3.7V High-Capacity Battery
Quick swap pack
Advanced Smart Battery with gas gauge
3 power source options:
Battery
Wall adaptor
Cigarette light adaptor
Built-in charger
Also accepts standard consumer available AA Alkaline batteries
Rechargeable, user replaceable coin-cell backup battery
• Environmental (Standard):
Operating temperature: 14˚ F to 122˚ F (-10˚ C to 50˚ C)
Storage temperature: -13˚ F to 140˚ F (-25˚ C to 60˚ C)
Humidity: 5-95% RH non-condensing
Rain/Dust: IEC 529, classification IP54
Shock: Multiple 4 ft. (1.2m) drops to polished concrete
• Power Accessories
AC Wall adaptor (charge and operate hand-held)
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 7
Chapter 1: Introduction
Features
Single battery charger
Quad battery charger
Charger/Docking Station (charges hand-held and spare battery)
Vehicle cradle with optional charge capability
Automotive adaptor
• Communication Accessories:
Quad Dock (4-site) with 10/100BaseT Ethernet and charge functions
Desktop Charger/Docking Station supports USB host and device ports and optional 10/100Base T Ethernet module.
Powered/non-powered cradle for vehicle applications
Port Replicator for vehicle cradles (field installable option) includes 3
RS232 ports plus USB device port.
• Carrying Accessories:
handstrap, pistol grip w/ trigger, shoulder strap.
holster, belt loop, protective vinyl carrying case with belt clip.
8 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 1: Introduction
The WORKABOUT PRO Hand-Held Computer
1.3.2 The WORKABOUT PRO Hand-Held Computer
Figure 1.1 WORKABOUT PRO
Tether Port
Audio Jack
Low Insertion
Force Port (LIF)
Figure 1.2 Tether Port, Low Insertion Force (LIF) Port And Audio Jack
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 9
Chapter 1: Introduction
Regulatory Labels
1.3.3 Regulatory Labels
Warning: Using controls or adjustments or performing procedures other than those specified herein may result in hazardous radiation exposure.
Figure 1.3 Scanner Module–Laser Warning Label
Figure 1.4 End- Cap–Expansion Module Warning
Figure 1.5 Back Plate–Expansion Module Warning Label
10 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 1: Introduction
Regulatory Labels
Figure 1.6 Manufacturer Label – WORKABOUT PRO C Unit
Figure 1.7 Manufacturer Label – WORKABOUT PRO M Unit
Figure 1.8 FCC Compliance Label
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 11
Chapter 1: Introduction
Regulatory Labels
Figure 1.9 Standard Capacity Battery Label
Figure 1.10 High-Capacity Battery Label
12 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
B
ASIC
C
HECKOUT
2.1 Preparing The WORKABOUT PRO For Operation . . . . . . . . . . . . 15
2.1.1 The Main Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.1.2 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.1.3 The Internal Battery. . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2 Turning The WORKABOUT PRO On and Off . . . . . . . . . . . . . . . 15
2.2.1 Installing The Battery And Switching The Unit On . . . . . . . . . 15
2.3 Connecting The WORKABOUT PRO To A PC . . . . . . . . . . . . . . 16
2.3.1 Using Microsoft® ActiveSync® To Work With Files . . . . . . . . 16
2.4 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . 17
2.5 Resetting The WORKABOUT PRO Hand-Held . . . . . . . . . . . . . . 17
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 13
Chapter 2: Basic Checkout
Preparing The WORKABOUT PRO For Operation
2.1 Preparing The WORKABOUT PRO For Operation
2.1.1 The Main Battery
The WORKABOUT PRO can be powered with one of the following battery packs:
• Standard Battery
• High-Capacity Battery, or
• 3 AA alkaline batteries.
2.1.2 Charging The Battery
Important: It is critical that you review the battery safety guidelines in “Lithium Ion Battery Safety Precautions” on page 140 before charging the battery.
Battery packs shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed.
Batteries can be charged using a variety of chargers and docking stations along with a Workabout internal charger. When using the internal charger, a suitable power source is required. All chargers and docking stations are described in Chapter 8:
Peripheral Devices & Accessories beginning on page 150.
2.1.3 The Internal Battery
To preserve data stored in your WORKABOUT PRO while you swap the main battery, the unit is equipped with an internal battery – a standard Lithium Alloy
Manganese Dioxide coin battery – a Maxell ML2032. This battery is easily accessible by removing the back cover of the unit.
2.2 Turning The WORKABOUT PRO On and Off
2.2.1 Installing The Battery And Switching The Unit On
• Turn the fasteners at the base of the battery cover counter-clockwise to unlock the cover and remove it. The top of the stylus is shaped to help you loosen the fasteners.
• Slide the charged battery into the unit. Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 15
Chapter 2: Basic Checkout
Switching The Unit Off (Suspend)
Note: If you are using a docking station or an external power supply, you can insert an uncharged battery, dock the unit and switch it on.
To switch on the WORKABOUT PRO:
• Press and hold down the <ENTER/ON> key for at least one second.
• When the LED flashes green, release the <ENTER/ON> button.
A splash screen displaying the Psion Teklogix logo and the Microsoft®
Windows CE .NET logo appears followed by the startup desktop.
Note: If the unit was already in use – the unit may be off (suspend state) – pressing <ENTER/ON> ‘wakes’ the unit from this state. The screen in which you were working prior to the suspend state is displayed.
2.2.2 Switching The Unit Off (Suspend)
• Press the <BLUE> key, and then press <ENTER/ON> to switch off the
WORKABOUT PRO.
2.3 Connecting The WORKABOUT PRO To A PC
Note: Refer to “Linking A WORKABOUT PRO To A PC” on page 146 for more details about the desktop docking station and how to link to a PC.
The WORKABOUT PRO can be connected to a PC using the desktop docking station.
• Insert the unit in the desktop docking station,
• Use the Client USB connector to complete the communication link between the hand-held and the PC.
2.3.1 Using Microsoft
®
ActiveSync
®
To Work With Files
ActiveSync® – Microsoft PC connectivity software – can be used to connect the
WORKABOUT PRO to PCs running this software. By connecting the hand-held to a
PC through your desktop docking station and running ActiveSync on the PC, you can view WORKABOUT PRO files, drag and drop files between the WORKABOUT
PRO and the PC, back up WORKABOUT PRO files to the PC, and so on.
Note: You’ll need the USB setup utility to configure the .ini file. For information about this USB application, refer to Appendix C: USB Setup Application.
16 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Calibrating The Touchscreen
To install ActiveSync, follow the step-by-step instructions provided with the program’s setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx
2.4 Calibrating The Touchscreen
Refer to “Calibrating The Touchscreen” on page 30 for details.
2.5 Resetting The WORKABOUT PRO Hand-Held
Important: Because Psion Teklogix cannot guarantee what has been saved
(registry) after a reset, this should be considered as a last resort.
To reset the unit:
• Press and hold down the <BLUE> key and the <ENTER/ON> key simultaneously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card may be preserved, but Psion
Teklogix cannot guarantee this.
Note: You do not need to reset your WORKABOUT PRO after configuring the radio.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 17
G
ETTING
T
O
K
NOW
T
HE
WORKABOUT PRO
3.1 Features Of The WORKABOUT PRO . . . . . . . . . . . . . . . . . . . 21
3.2 The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3.2.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.2.2 Removing And Installing The Battery Pack . . . . . . . . . . . . . 23
3.2.3 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.3 Switching The Hand-Held On And Off . . . . . . . . . . . . . . . . . . . 25
3.4 The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.4.1 Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.4.1.1 Activating Modifier Keys . . . . . . . . . . . . . . . . . . 27
3.4.1.2 Locking Modifier Keys . . . . . . . . . . . . . . . . . . . 27
3.4.2 The Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.4.3 The Keypad Backlight . . . . . . . . . . . . . . . . . . . . . . . . 29
3.5 The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.5.1 Colour Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
3.5.2 Monochrome Display . . . . . . . . . . . . . . . . . . . . . . . . . 30
3.5.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . 30
3.6 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.6.1 The LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.6.2 Onscreen Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.6.3 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.6.3.1 Adjusting The Speaker Volume . . . . . . . . . . . . . . . 35
3.7 Monitoring The Battery And Maximizing Run Time . . . . . . . . . . . . 35
3.7.1 Storing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3.8 Uploading Data In A Docking Station . . . . . . . . . . . . . . . . . . . 36
3.9 Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.10 The SD/MMC Card – Adding Memory . . . . . . . . . . . . . . . . . . 37
3.10.1 Inserting The Card. . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.11 General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.11.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . . 39
3.11.2 Cleaning The WORKABOUT PRO . . . . . . . . . . . . . . . . . 39
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 19
Chapter 3: Getting To Know The WORKABOUT PRO
Features Of The WORKABOUT PRO
3.1 Features Of The WORKABOUT PRO
Sound Port
Stylus
(pointing tool)
LED
(Light Emitting Diode)
Microphone
Figure 3.1 Front Of WORKABOUT PRO M Or C
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 21
Chapter 3: Getting To Know The WORKABOUT PRO
The Batteries
End Cap
Back Cover
Battery Cover
Battery Cover
Fasteners
Tether Port
Audio Jack
Low Insertion
Force (LIF) Port
Figure 3.2 Back Of WORKABOUT PRO
3.2 The Batteries
The WORKABOUT PRO hand-held can operate with a Standard Lithium Ion battery pack, a High Capacity Lithium Ion battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, preparing the hand-held unit for operation requires that the battery pack be charged before it is installed in the unit.
22 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Battery Safety
To maintain data during a battery swap, the WORKABOUT PRO is also equipped with an easily accessible coin backup battery.
3.2.1 Battery Safety
Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in the section entitled “Lithium Ion Battery Safety Precautions” beginning on page 140.
3.2.2 Removing And Installing The Battery Pack
Removing The Battery Cover
• Turn the fasteners at the base of the battery cover counter-clockwise to unlock the cover. The top of the stylus has a screwdriver shaped end to help you loosen the fasteners.
• Lift and remove the cover.
Battery Cover Fasteners
Figure 3.3 The Battery Cover
Installing The Battery
• Insert the charged battery in the unit.
• Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place.
Note: If you are using a docking station or other external power source, you can insert an uncharged battery, dock the unit and switch it on.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 23
Chapter 3: Getting To Know The WORKABOUT PRO
Charging The Battery
3.2.3 Charging The Battery
Important: FOR DETAILED INFORMATION about chargers and docking
stations, refer to Chapter 8: Peripheral Devices & Accessories beginning on page 131.
For battery safety, refer to “Lithium Ion Battery Safety Precautions” beginning on page 140.
Lithium Ion battery packs must be charged before use. These batteries can be charged with a variety of chargers and docking stations. These include:
• Desktop Docking Station (Model #WA4002) – operates as both a charger and a docking station. Operating as a charger, both the battery installed in the hand-held and a spare battery can be charged simultaneously.
• Quad Docking Station (Model #WA4004) – can charge the battery of up to four WORKABOUT PROs inserted in the docking station.
• Single Battery Charger (Model #WA3001) – charges a single battery.
• Quad Battery Charger (Model #WA3004) – charges up to four spare Standard or High-Capacity WORKABOUT PRO battery packs.
It can take up to 5 hours to charge a battery. The WORKABOUT PRO’s intelligent charging system protects the battery from over-charging by terminating the charge process when the battery is at maximum capacity.
Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 35 for additional information about the battery.
Important: To avoid damaging the battery, chargers will not begin the charge process until the battery temperature is between 0˚ C to 45 ˚C
(32˚ F to 113˚ F).
24 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Switching The Hand-Held On And Off
3.3 Switching The Hand-Held On And Off
Switching On The WORKABOUT PRO
• Press and hold down the <ENTER/ON> key for at least one second.
• When the LED flashes green, release the <ENTER/ON> button.
A splash screen displaying the Psion Teklogix logo and the Windows CE .NET logo appears followed by the startup desktop.
Note: If the WORKABOUT PRO is in suspend state, pressing <ENTER/ON> key ‘wakes’ the unit from this state. The screen in which you were working before the computer entered suspend state is displayed.
Switching Off The WORKABOUT PRO (Suspend)
Important: Keep in mind that turning off the WORKABOUT PRO does not result in a complete reboot; rather, the unit enters a power-saving,
“suspend” state. When the unit is turned on from suspend state, operation resumes within a few seconds.
To switch off the WORKABOUT PRO:
• Press the <BLUE> key, and then press the <ENTER/ON> key.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 25
Chapter 3: Getting To Know The WORKABOUT PRO
The Keyboard
3.4 The Keyboard
Arrow
Keys
Scan
Key
Contrast
Key
Orange
Key
Scan
Key
Display
Backlight Key
Blue
Key
Figure 3.4 The Keys
The WORKABOUT PRO is equipped with a 55-key alphanumeric keyboard. Along with the standard keyboard keys, the <ORANGE> and <BLUE> modifier keys provide access to additional keys and system functions. These functions are colour coded in orange and blue print above the keyboard keys.
Note: Almost all keys can be reprogrammed to suit your requirements.
26 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Modifier Keys
3.4.1 Modifier Keys
The <SHIFT>, <CTRL>, <ALT>, <ORANGE> and <BLUE> keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, a square bracket is printed in orange print above the <4> key. Pressing the
<ORANGE> key followed by the <4> key displays a square bracket rather than the number 4.
The <SHIFT>, <CTRL> and <ALT> keys operate like a desktop keyboard except that they are not chorded (two keys held down simultaneously). The modifier key must be pressed first followed by the key whose function you want modified.
3.4.1.1
Activating Modifier Keys
When a modifier key is pressed once, it is displayed in lowercase letters in the taskbar at the bottom of the screen. For example, if the <CTRL> key is pressed once, ctrl key is displayed in the taskbar. Once the next key is pressed, the modifier key becomes inactive and disappears from the taskbar.
3.4.1.2
Locking Modifier Keys
When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is displayed in uppercase letters in the taskbar. For example, pressing the <BLUE> key twice locks it on – it is displayed as BLUE KEY in the taskbar at the bottom of the computer screen.
The locked modifier key will remain active until it is pressed a third time to unlock or turn it off. Once a modifier key is unlocked (pressed a third time), the uppercase representation in the taskbar is no longer displayed.
Note: The locking function of the <ORANGE> and <BLUE> keys can be disabled so that pressing either of these keys once will lock the keys ‘on’.
Refer to “Keyboard One Shot Modes” on page 69 for details.
3.4.2 The Keys
The <SHIFT> Key
The <SHIFT> key is used to display uppercase alpha characters and provide access to the symbols above the numeric keys. Pressing this key twice locks it ‘on’ so that when you press an alpha key, an upper case character is displayed. When you press a numeric key, the associated symbol on the numeric key is displayed
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 27
Chapter 3: Getting To Know The WORKABOUT PRO
The Keys
The Arrow Keys
The Arrow keys are located on the grey circular key at the top of the keyboard, directly below the display. The arrow keys move the cursor around the screen – up, down, left and right. The cursor is the flashing box or underline character that indicates where the next character you type will appear.
The <BKSP/DEL> Key
The <BKSP> key (sometimes referred to as destructive backspace) moves the cursor one character to the left, erasing the incorrectly entered key stroke.
The <DEL> key (<BLUE> <BKSP>) erases the character at the cursor position.
The <CTRL> And <ALT> Keys
The <CTRL> and <ALT> keys modify the function of the next key pressed and are application dependent.
The <TAB> Key
Typically, the <TAB> key moves the cursor to the next field to the right or downward.
The <ESC> Key
Generally, this key is used as a keyboard shortcut to close the current menu, dialogue box or activity and return to the previous one.
The <SPACE> Key
Pressing this key inserts a blank space between characters. In a Windows dialogue box, pressing the <SPACE> key enables (
√
) or disables a checkbox.
The <SCAN> Keys
Pressing either of the <SCAN> keys – the two yellow keys situated in upper-left and upper-right corner of the keyboard – activates the scanner beam. For units that do
not have internal scanners, these keys are inoperable.
The Function Keys – <F1> to <F10>
Function keys <F1> to <F10> perform special, custom-defined functions. These keys are accessed by pressing <BLUE> followed by numeric keys <1> to <10>.
They can be used with the Windows CE .NET operating system or another application.
28 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
The Keypad Backlight
The Macro Keys – <M1> to <M3>
Macro keys <M1> to <M3> contain up to 20 programmable characters (“positions”) and executable keys. These keys are accessed by pressing <ORANGE> followed by alpha keys <O>, <P> or <Q>. When pressed, the macro key executes a custom-defined string of characters, including executable keys.
3.4.3 The Keypad Backlight
The intensity of the keypad backlight and the conditions under which this backlight is activated can be configured using the Keyboard icon in the Control Panel . The behaviour of the keypad backlight is tailored in the Keyboard Properties dialogue box. Refer to
“Keyboard Backlight” on page 68 for details about this option.
Note: Keep in mind that this option may be restricted to supervisory use only.
3.5 The Display
Depending on the type of display – colour or monochrome – you can adjust the backlight behaviour or the contrast of the display to improve character visibility.
Note: Display backlight and contrast adjustments may be restricted to supervisory use only.
3.5.1 Colour Display
Adjusting The Backlight
Note: For units equipped with monochrome screens, the Backlight key < > turns the backlight on or off. Backlight intensity cannot be adjusted.
On colour screens, the display backlight can be adjusted using the keyboard.
• Press the Backlight key < > to cycle from the lightest to darkest settings, and then back to lightest. Press <ORANGE> < > to cycle backward from darker to lighter.
To set the range of the backlight intensity and the duration of time that the backlight will remain on, you’ll need to choose the Display icon in the Control Panel . Refer to
“Display Backlight” on page 65 for details about the Display Properties Backlight tab.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 29
Chapter 3: Getting To Know The WORKABOUT PRO
Monochrome Display
3.5.2 Monochrome Display
Adjusting The Contrast
Note: Contrast adjustment is only available on hand-helds equipped with monochrome screens. Contrast has no effect on units with colour screens.
The display contrast can be adjusted from the keyboard using the Contrast key < > just below the arrow keys.
• Press this key until you are satisfied with the contrast adjustment. Press
<ORANGE> < > to shift contrast backward.
To set the maximum range of the contrast on a monochrome screen, you’ll need to choose the Display icon in the Control Panel. Refer to “Display Contrast” on page 64 for details about the Display Properties Contrast tab.
Keep in mind that this option may be restricted to supervisory use only
3.5.3 Calibrating The Touchscreen
If your touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, use the Stylus Properties dialogue box in the Control
Panel to recalibrate the screen.
• In the Control Panel , choose the Stylus icon to display the Stylus Properties window.
Figure 3.5 Stylus Icon
30 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Indicators
• Select the Calibration tab, and then tap on the ‘ Recalibrate ’ button.
Figure 3.6 Calibration Screen
• Follow the directions on the calibration screen to calibrate the screen.
Note: The Stylus Properties dialogue box provides two additional tabs: Double-tap and
Options . The Double-Tap tab allows you to adjust the sensitivity of the double-tap and the physical distance between taps. The Options tab allows you to disable the touchscreen.
3.6 Indicators
The WORKABOUT PRO uses an LED (Light Emitting Diode), onscreen messages and audio tones to indicate the various conditions of the hand-held, the batteries, the scans and so on.
3.6.1 The LED
The WORKABOUT PRO is equipped with a single, dual-coloured LED. When the
<ENTER/ON> key is pressed, the LED flashes green to indicate that the unit has been powered up.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 31
Chapter 3: Getting To Know The WORKABOUT PRO
Onscreen Indicators
If the unit is attached to an external power supply, the hand-held LED reflects the battery charge status.
LED Behaviour Charge Status
Off
Solid green
Fast flashing green
Slow flashing green
Solid red
Flashing red
No battery detected in the charge well.
Battery is fully charged.
Battery is charged to 75% capacity.
Charge in progress.
Battery is outside ambient temperature range of
0˚ C to 45 ˚C (32˚ F to 113˚ F).
Charge alarm indicating a charging circuit problem.
Refer to “Troubleshooting” on page 151 for details.
Flashing red then green in a 3 second cycle
Power up test sequence.
Table 3.1 WORKABOUT PRO LED BEHAVIOUR
Note: The application installed on your WORKABOUT may alter the behaviour of the LED on your unit. Refer to your application manual for details.
3.6.2 Onscreen Indicators
The taskbar at the bottom of the screen displays a variety of system status indicators.
Figure 3.7 Taskbar
32 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Onscreen Indicators
Taskbar icons change dynamically, and only those icons that are applicable are displayed. For example, if a Bluetooth radio is not installed in your hand-held, the
Bluetooth radio icon is not displayed in the taskbar.
Note: To access these icons and display the associated menu and dialogue boxes, refer to “Using The Taskbar” on page 46.
Windows® Start Button
This icon provides access to the Start Menu. Tapping on the Windows® Start button displays the menu.
Modifier Key Indicators
<SHIFT>, <CTRL>, <ALT>, <BLUE> and <ORANGE> are modifier keys that have associated onscreen indicators to show when a key is active or locked. If a modifier key is pressed once to activate it, the key is displayed in the taskbar in
lowercase characters – for example, pressing the <BLUE> key once displays ‘ blue key ’ in the taskbar. If a modifier key is pressed twice, it is ‘locked on’ and the onscreen indicator is displayed in uppercase letters in the taskbar – for example, pressing <BLUE> twice displays ‘ BLUE KEY ’ in the taskbar.
Battery Gauge
The battery shaped icon displayed in the taskbar provides a visual indication of the remaining battery power. The icon acts as a meter that is either full, at three-quarter level, half, quarter level or empty.
When the battery level is low – approximately 15 minutes from empty – a warning window pops up. When the battery power is completely depleted, a final warning window indicates that the WORKABOUT PRO will be powered down.
If the unit is being powered externally, an external power icon is displayed in the taskbar.
Full 75% 50% 25% Empty External Power
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 33
Chapter 3: Getting To Know The WORKABOUT PRO
Audio Indicators
Battery Charge
The battery charge icon is displayed in the taskbar when the battery is being charged.
LIF and USB Devices
When a device such as a docking station or a charger is connected to the USB
(tether) port or the LIF (Low Insertion Force) port and is activated, an associated icon appears in the taskbar. A message also appears on the screen recognizing that a new device has been connected through either the USB or the LIF port.
New device connected: New device connected:
LIF Port USB Port
Bluetooth Radio
If a Bluetooth radio is installed in your unit, this icon is displayed in the taskbar.
Security Level
Security levels can be set to limit user access to the settings. In addition, applications can be restricted to prevent inadvertent changes.
3.6.3 Audio Indicators
The audio speaker provides a variety of sounds and can be configured to emit a sound when a key is pressed, a keyboard character is rejected, scan input is accepted or rejected, an operator’s entry does not match in a match field or the battery is low.
The volume keys are located above the <A> and <B> keys. The increase volume key is labelled with a plus symbol and the decrease volume key is labelled with a minus symbol .
34 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Adjusting The Speaker Volume
3.6.3.1
Adjusting The Speaker Volume
To adjust the speaker volume:
• Press the <BLUE> key twice to lock the key ‘on’ and then, press the
increase volume key or the decrease volume key until the volume meets your requirements.
• Remember to press the <BLUE> key again to turn it ‘off’.
3.7 Monitoring The Battery And Maximizing Run Time
Under normal operating conditions, fully charged Standard Batteries hold a charge for up to 8 hours. High-Capacity batteries can hold a charge for up to 12 hours.
As Lithium Ion batteries age, their capacity decreases gradually, and they are generally considered depleted after approximately 2 years of use (less than 60% of original capacity remaining). Keep in mind however that heavy usage or operating the unit at temperature extremes will shorten the battery life.
Lithium Ion batteries do not require conditioning cycles and the WORKABOUT
PRO battery system (including chargers) requires no user interaction to maintain peak performance.
To maximize the run time of your batteries, consider the following:
• The display backlight is the largest drain on the battery. Try to keep its brightness as low as possible.
• The hand-held is ‘event’ driven – that is, when the unit is not in use, it reverts to sleep mode (even when it appears to be running), saving battery power. Events include a key press, touchscreen taps and scan triggers.
Power consumption is reduced if you avoid unnecessary events, and allow the unit to sleep as much as possible.
• The battery is a ‘smart battery’ with built-in intelligence. The taskbar battery icon is a linear gauge used to estimate the remaining run time of the battery. It is important to note that the battery capacity icon displays quarter percentages of nominal capacity (the capacity of a new battery). An aged battery, even when fully charged, shows somewhat less capacity than nominal.
Double-tapping on the battery icon displays a dialogue box that provides detailed information about the battery status and performance.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 35
Chapter 3: Getting To Know The WORKABOUT PRO
Storing Batteries
• When the hand-held is switched off, it goes into a low-power, suspend state but continues to draw a small amount of power from the battery. This should not be an issue unless the unit is left in suspend state for more than a week – in this case, the battery should be removed.
3.7.1 Storing Batteries
Long term battery storage is not recommended. If storage is necessary:
• Always try to use a ‘first-in first-out’ approach to minimize storage time.
• Lithium Ion batteries age much faster at elevated temperatures. Store batteries at temperatures between 0˚ C and 20˚C.
• Always charge batteries to at least 40 to 60% before storing them. Batteries can be damaged by an over-discharge phenomenon that occurs when an empty battery is stored for a long period of time such that the cell voltage drops below a lower limit.
• To minimize storage degradation, recharge stored batteries to 40 to 60% every 4 or 6 months to prevent over-discharge damage.
• A ‘never used’ Li-Ion battery that has been stored for 3 years may have limited or no useful life remaining once put into service. Think of batteries as perishable goods.
3.8 Uploading Data In A Docking Station
Important: Review the documentation provided with the user application installed in your WORKABOUT PRO before performing data uploads.
The desktop docking station and quad docking station allows the WORKABOUT
PRO to link to an Ethernet network. They are typically used to upload transaction data to a server computer when a radio link in not available.
Note: Refer to “Chargers And Docking Stations” on page 141 for more details.
36 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Bluetooth Radio
The desktop docking station can complete batch uploads to a Client USB connected
PC or server. An optional10/100baseT Ethernet module is also available.
Unlike the desktop docking station, the quad docking station supports only TCP/IP connections to a PC or server through a 10/100baseT Ethernet connection.
When a WORKABOUT PRO is properly inserted in a docking station, a dock icon is displayed in the taskbar at the bottom of the screen. The unit also detects the presence of the Ethernet network.
3.9 Bluetooth Radio
Note: Integrated Bluetooth class II radios are standard on WORKABOUT
PRO C units. Keep in mind also that Bluetooth is available simultaneously with WAN and 802.11b on a single unit.
A WORKABOUT PRO C is equipped with an on-board Bluetooth radio. This type of radio enables short range data communication between devices. The Bluetooth also provides the capability to use a Bluetooth-enabled cellular phone as a data modem, exchanging information with other Bluetooth devices and providing network access. Keep in mind too that a Bluetooth and an 802.11b radio card can operate simultaneously in your unit. Refer to “The Bluetooth GPRS Phone” on page 84 for setup details.
3.10 The SD/MMC Card – Adding Memory
To add additional non-volatile memory to your hand-held, you can insert a Secure
Digital/Multi-Media Card (SD/MMC) through the battery compartment.
3.10.1 Inserting The Card
• Remove the battery cover and the battery.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 37
Chapter 3: Getting To Know The WORKABOUT PRO
Inserting The Card
A hinged door at the top of the battery compartment protects the connectors.
Hinged SD door
SD/MMC
Card
Figure 3.8 Inserting the SD.MMC Card
• Lift the hinged SD door by gently pulling upward on the metal tab.
• Orient the SD/MMC card according to the legend stamped into the battery well plastic.
• Place the card in the slot with the card contacts down, and slide it inward until it latches into place.
• Swing hinged door back into place.
To remove the card:
• Gently press it inward slightly until the detent unlatches, and the card is expelled from the slot.
38 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
General Maintenance
3.11 General Maintenance
3.11.1 Caring For The Touchscreen
The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive coating on the inside. The polyester can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic, or crack the internal conductive coating.
The chemicals listed below must not come into contact with the touchscreen:
• mustard,
• sodium hydroxide,
• concentrated caustic solutions,
• benzyl alcohol, and
• concentrated miner acids.
If the touchscreen is used in harsh environments, consider applying a disposable screen protector (WA6110). These covers reduce the clarity of the display slightly but will dramatically extend the useful life of the touchscreen. When they become scratched and abraded, they are easily removed and replaced.
3.11.2 Cleaning The WORKABOUT PRO
Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent to wipe the unit clean.
• Use only mild detergent or soapy water to clean the hand-held unit.
• Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions.
• To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 39
W
ORKING
W
ITH
W
INDOWS
CE .NET
4
4.1 Navigating In Windows CE .NET And Applications . . . . . . . . . . . . 43
4.1.1 Navigating Using A Touchscreen And Stylus . . . . . . . . . . . . 43
4.1.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . . . 43
4.2 Working With Files, Folders And Programs . . . . . . . . . . . . . . . . 44
4.3 The Startup Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.3.1 The Desktop Icons . . . . . . . . . . . . . . . . . . . . . . . . . . 45
4.3.2 The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
4.4 The Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4.4.1 The Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.4.2 Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.4.3 The System Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
4.4.4 The Task Manager . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.4.5 Cycle Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.4.6 Power Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4.4.7 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.4.8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.4.9 Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.4.10 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.5 Using A Dialogue Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 41
Chapter 4: Working With Windows CE .NET
Navigating In Windows CE .NET And Applications
4.1 Navigating In Windows CE .NET And Applications
Graphic user interfaces like Windows CE .NET for portable devices or desktop
Windows (2000, XP, etc.) utilize ‘point and click’ navigation. On the WORK-
ABOUT PRO, this is accomplished using a touchscreen and stylus rather than a mouse. An equivalent keyboard shortcut is also available for every ‘point and click’ action.
4.1.1 Navigating Using A Touchscreen And Stylus
Note: If the touchscreen is not registering your screen taps accurately, it may need recalibration. Refer to “Calibrating The Touchscreen” on page 30.
A touchscreen is a standard feature on all WORKABOUT PROs. Each is equipped with a stylus – a pointing tool that looks like a pen – stored in a slot at the top of the unit. The stylus is used to select objects on the touchscreen.
• Tap the stylus on the appropriate icon to open a file or launch an applet.
4.1.2 Navigating Using The Keyboard
If the touchscreen on your unit is disabled, choosing icons and navigating dialogue boxes, displaying the desktop, and so on will require keyboard input.
Operation Key or Key Combination
Switch between active applications <ALT> <TAB>
Open task manager <ALT> <ESC>
Move the cursor
Open file, folder or icon
Arrow keys
<ENTER>
Exit & Save
Close/Exit & Do Not Save
Navigate Dialogue Boxes
<ENTER>
<ESC>
<TAB>
To move cursor up <SHIFT> <TAB>
To display contents of the next ‘tab’ <CTRL><TAB>
Select Radio Button/Press Button <SPACE>
Go to Start Menu <BLUE><.>
Table 4.1 Keyboard Navigation
Keep in mind that unlike a desktop computer, the WORKABOUT PRO does not support key chording (pressing two keys at the same time). You must press one key followed by the next in sequence.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 43
Chapter 4: Working With Windows CE .NET
Working With Files, Folders And Programs
4.2 Working With Files, Folders And Programs
Folder
Program Icon
File
Figure 4.1 Working With Windows Icons
• Double-tap on the appropriate icon – a folder icon, a program icon or a file icon – to open or launch your selection.
4.3 The Startup Desktop
When the WORKABOUT PRO boots up, the startup desktop (shell) is displayed.
Any applications stored in the Startup folder start up immediately.
Figure 4.2 The WORKABOUT PRO Startup Desktop
44 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 4: Working With Windows CE .NET
The Desktop Icons
Note: The startup folder is in: \Windows\StartUp and \Flash Disk\Start Up.
• Tap on an icon to open a window or, in the case of an application icon, launch an application.
4.3.1 The Desktop Icons
The icons displayed in the startup desktop operate in much the same way as those displayed on any standard PC desktop that is running Windows®.
My Computer
Choosing this icon displays the contents of your WORKABOUT PRO. If you’re not sure how to work with the files, folders and programs displayed, refer to “Working
With Files, Folders And Programs” on page 44.
Recycle Bin
This option temporarily contains items that were deleted, allowing you to either permanently delete or restore the items.
Command Prompt
Command Prompt is used to access the DOS command prompt. At the prompt, you can type DOS commands such as dir to display all the directories in the drive.
Inbox
Inbox is used to access and view your email.
Internet Explorer
Choosing this icon launches Internet Explorer – a standard Windows CE .NET version. Keep in mind that your supervisor will need to set up access using the
Internet Options
and the
Network and Dial-up Connections
icons in the
Control Panel
.
Microsoft Wordpad
Th
is application, an abbreviated version of Microsoft Word, allows you to create documents on the WORKABOUT PRO.
Remote Desktop Connection
This option allows your WORKABOUT PRO to communicate with a remote desktop PC. “Remote Desktop Connection” on page 59 provides a website address with step-by-step instructions.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 45
Chapter 4: Working With Windows CE .NET
The Taskbar
4.3.2 The Taskbar
Figure 4.3 The Taskbar
The WORKABOUT PRO is equipped with a taskbar at the bottom of the screen. It displays icons through which you can view the battery capacity and identify any active modifier keys – <SHIFT>, <ALT>, <CTRL>, <ORANGE> and <BLUE>.
Keys that have been locked “on” are displayed in uppercase letters. When a peripheral is attached to the tether or LIF port, the associated icon is displayed. In addition, the taskbar displays the application(s) currently running on your unit and the security level assigned to it.
4.3.2.1
Using The Taskbar
• Using the stylus, tap on an icon to display the associated dialogue box. For example, tap on the battery icon to display a
Power Properties
dialogue box that indicates the current battery capacity.
Note: If your touchscreen is disabled, type <BLUE> <.> <Y> to choose System Tray from the Start Menu . Press the <LEFT> or <RIGHT> arrow keys to choose a taskbar icon and press <ENTER> to display the associated dialogue box.
4.3.2.2
Customizing The Taskbar
To customize the taskbar so that it displays only those icons you require:
• Tap on the Settings option, and then tap on
Taskbar...
in the sub-menu,
46 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 4: Working With Windows CE .NET
The Start Menu
The
Taskbar and Start Menu
dialogue box is displayed.
Figure 4.4 Taskbar And Start Menu Settings
• Tap the stylus on the items you want to activate or deactivate. A check mark indicates an active item.
4.4 The Start Menu
Note: Some of the Start Menu items may be disabled based on the WORK-
ABOUT PRO’s current security settings.
The
Start Menu
lists the operations you can access and work with. It is available from the startup desktop or from within any application.
To display the menu:
• Tap on the Windows® Start button in the left-most corner of the taskbar.
Figure 4.5 Start Menu
• Tap on the item in the menu with which you want to work.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 47
Chapter 4: Working With Windows CE .NET
The Desktop
4.4.1 The Desktop
Choosing the Desktop option from the
Start Menu
displays the WORKABOUT
PRO desktop.
4.4.2 Security Settings
Choosing the Security option from the
Start Menu
displays a dialogue box in which you can define the WORKABOUT PRO access level –
Teklogix
,
Supervisor
or
User
.
Figure 4.6 Security Levels
Security Level
These security levels define the options accessible to the operator in the
Start Menu
and the taskbar. When you change security levels, you’ll need to enter the appropriate password in the
Password
textbox. The security level is represented by an icon in the shape of a lock in the taskbar.
Changing A Password
Note: Keep in mind that this is the same password as that assigned through the
Password
control panel applet. Refer to “Control Panel Icons” on page 60.
To assign a password:
• Choose a security level, and enter the existing password in the
Password
field
• Choose the
Set Password
button.
A dialogue box labelled
Password Properties
is displayed.
• Type the new password in the
Password:
text box
• In the
Confirm Password:
text box, retype the new password.
48 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 4: Working With Windows CE .NET
The System Tray
Configuring Security
Choosing the
Configure
button displays the
Configure Security
dialogue box.
Figure 4.7 Configuring Security
This dialogue box allows you to determine which security levels will have an associated icon displayed in the taskbar. By default, a security icon is not displayed for user-level security.
4.4.3 The System Tray
Note: This option is useful if your touchscreen has been disabled. Activating
System Tray allows you to access taskbar icons using keyboard keys in place of the stylus.
The System Tray option allows access to the icons in the taskbar using your keyboard. The taskbar displays indicators such as a battery capacity gauge and the security level. These indicators are attached to dialogue boxes that provide additional information.
• Choose System Tray from the
Start Menu
.
To display the dialogue box attached to an icon:
• Press the <LEFT> or <RIGHT> arrow keys to choose a taskbar icon and press <ENTER> to display the associated dialogue box.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 49
Chapter 4: Working With Windows CE .NET
The Task Manager
4.4.4 The Task Manager
The Task Manager option allows you to switch to another task or to end an active task. To display the task manager window:
• Tap on the Task Manager in the
Start Menu.
Figure 4.8 Task Manager
4.4.5 Cycle Tasks
When Cycle Tasks is selected (and the Task Manager is not open), you can cycle through active applications. To choose this option:
• Tap on Cycle Tasks in the
Start Menu
.
4.4.6 Power Info
Selecting Power Info from the
Start Menu
displays the
Power Properties
dialogue box.
This dialogue box indicates the remaining charge capacity of the battery.
50 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 4: Working With Windows CE .NET
Programs
4.4.7 Programs
• Tap on Programs to display a sub-menu of options.
Figure 4.9 Program Sub-Menu
This sub-menu allows you to access to the following options:
ActiveSync
®
This option allows you to connect to another device using ActiveSync.
Command Prompt
Command Prompt
is used to access the DOS command prompt. At the prompt, you can type DOS commands such as dir to display all the directories in the drive.
Inbox
Inbox
is used to access and view your email.
Internet Explorer
The WORKABOUT PRO is equipped with Microsoft® Internet Explorer consistent with all Windows CE .NET devices on the market. You can access the
Internet Options
icon through the
Start Menu
under Settings>Control Panel or by double-tapping on the desktop icon labelled
My Computer
and then, double-tapping on the
Control Panel
icon.
Microsoft Wordpad
Th
is application, an abbreviated version of Microsoft Word, allows you to create documents using the WORKABOUT PRO.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 51
Chapter 4: Working With Windows CE .NET
Settings
Windows Explorer
Windows Explorer
installed on your unit is consistent with all Windows CE .NET devices. You can access this option either from the
Start Menu
under
Programs>Windows Explorer .
Remote Desktop Connection
Remote Desktop Connection
is an application used to connect to a Windows Terminal
Server so that you can run a “session” on the Server machine using the
WORKABOUT PRO (Windows CE .NET device). “Remote Desktop Connection” on page 59 provides a website with details about this option.
4.4.8 Settings
Tapping on Settings displays a sub-menu of options, including
Control Panel,
Network and Dial-up Connections
and
Taskbar and Start Menu
settings.
Figure 4.10 Settings Sub-Menu
Control Panel
The
Control Panel
contains applets used to configure hardware, the operating system and the shell. If your unit is running with the Psion Teklogix Open Tekterm application or another application, additional configuration applets may appear in the
Control Panel.
52 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 4: Working With Windows CE .NET
Run
Network And Dial-Up Connections
The
Network and Dial-up Connections
window allows you to configure the radio or execute an existing configuration. Refer to “Configuring An IEEE 802.11b Radio” on page 111 for radio setup details.
Taskbar And Start Menu
The
Taskbar and Start Menu
option displays a dialogue box in which you can customize the taskbar, choosing which options will be displayed. Refer to
“Customizing The Taskbar” on page 46 for additional details about this option.
4.4.9 Run
Choosing the Run option from the
Start Menu
displays a dialogue box in which you can enter the name of the program, folder or document you want to open or launch.
Figure 4.11 Run Dialogue Box
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 53
Chapter 4: Working With Windows CE .NET
Shutdown
4.4.10 Shutdown
With Shutdown highlighted, pressing the <RIGHT> arrow key displays a sub-menu of options, including
Suspend, Warm Reset
and
Cold Reset.
Figure 4.12 Shutdown Sub-Menu
Note: This menu varies slightly depending on the security level chosen. When the unit is set to User level, the
Shutdown
option is replaced by
Suspend
.
A sub-menu is not available.
At Teklogix security level, an additional option is available in the sub-menu
–
Bootloader
. This option behaves like cold-reset, except that the WORK-
ABOUT PRO starts Bootloader rather than Windows CE .NET
Suspend
The
Suspend
option suspends the WORKABOUT PRO immediately – this is equivalent to turning the hand-held off.
Warm Reset
The
Warm Reset
option resets the WORKABOUT PRO, leaving all saved files and
(registry) settings intact. Any unsaved data is lost.
Cold Reset
The
Cold Reset
option resets the WORKABOUT PRO. Any files not stored in permanent memory are lost. However, the registry settings are saved.
54 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 4: Working With Windows CE .NET
Using A Dialogue Box
4.5 Using A Dialogue Box
A dialogue box (like the samples in Figure 4.13) appears when you need to make selections and enter further information.
You can move between dialogue items by tapping on them, or by pressing the arrow keys and the <TAB> key. (<SHIFT> <TAB> moves the cursor backwards.)
Tabs
Radio
Button
Textbox
Checkbox
Dropdown Menu
Button
Figure 4.13 Dialogue Boxes
Dialogue boxes contain one or more of the following elements:
Tab: A tab separates different elements of a dialogue box. Tapping on a tab displays its contents.
Textbox: A textbox requires that you type information. Use the stylus to highlight the textbox and then type the appropriate information.
Dropdown: This type of menu is identified by up and down arrows next to the dropdown menu to indicate that additional options are available. Tap on the menu to highlight it, and use the arrows to cycle through the options.
Checkbox: This box allows you to select or deselect an option. To select or deselect a checkbox, tap the stylus in the checkbox to select (
√
) or deselect it.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 55
Chapter 4: Working With Windows CE .NET
Using A Dialogue Box
Radio buttons: These buttons allow you to choose from a number of options. For example, in the sample screen in Figure 4.13 on page 55 you can choose to
‘Obtain an
IP address via DHCP’
or
‘Specify an IP address’
. Tap on a radio button to activate the option next to it.
Buttons: This type of button allows you to ‘Save’, ‘Delete’ and so on the options you’ve chosen in a dialogue box. Tap the stylus on the button you want to activate it.
Saving Your Choices: Once you’ve made all your changes, tap on the OK button or press the <ENTER> to save your changes and exit the dialogue box.
Note: A dialogue box item that is displayed in grey text indicates that it is not currently available.
56 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
C
ONFIGURATION
5.1 Remote Desktop Connection . . . . . . . . . . . . . . . . . . . . . . . . 59
5.2 Pocket PC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . 59
5.3 The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
5.4 Control Panel Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.5 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
5.5.1 Display Properties . . . . . . . . . . . . . . . . . . . . . . . . . . 64
5.5.1.1 Display Contrast . . . . . . . . . . . . . . . . . . . . . . . 64
5.5.1.2 Display Backlight . . . . . . . . . . . . . . . . . . . . . . 65
5.5.1.3 Display Appearance . . . . . . . . . . . . . . . . . . . . . 66
5.5.2 Keyboard Properties . . . . . . . . . . . . . . . . . . . . . . . . . 67
5.5.2.1 Key Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . 67
5.5.2.2 Keyboard Backlight . . . . . . . . . . . . . . . . . . . . . 68
5.5.2.3 Keyboard One Shot Modes . . . . . . . . . . . . . . . . . 69
5.5.2.4 Keyboard Macro Keys . . . . . . . . . . . . . . . . . . . . 70
5.5.2.5 Unicode Mapping . . . . . . . . . . . . . . . . . . . . . . 71
5.5.3 Volume And Sound Properties . . . . . . . . . . . . . . . . . . . . 73
5.5.3.1 Volume Adjustments . . . . . . . . . . . . . . . . . . . . . 73
5.5.4 Power Management Properties . . . . . . . . . . . . . . . . . . . . 74
5.5.4.1 Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . 74
5.5.4.2 Power Saving Schemes . . . . . . . . . . . . . . . . . . . 75
5.5.5 Stylus Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
5.5.5.1 Setting Double-Tap Sensitivity . . . . . . . . . . . . . . . 76
5.5.5.2 Touchscreen Calibration . . . . . . . . . . . . . . . . . . . 77
5.5.5.3 Touchscreen Options. . . . . . . . . . . . . . . . . . . . . 77
5.5.6 Certificate Assignment . . . . . . . . . . . . . . . . . . . . . . . . 77
5.6 Bluetooth Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
5.6.1 The Devices Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
5.6.2 The Server Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
5.6.3 The Property Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
5.6.4 The Bluetooth GPRS Phone . . . . . . . . . . . . . . . . . . . . . 84
5.7 SNMP (Simple Network Management Protocol) Setup . . . . . . . . . . 90
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 57
Chapter 5: Configuration
5.7.1 Contact Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
5.7.2 Communities Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
5.7.2.1 Adding A Community . . . . . . . . . . . . . . . . . . . . 93
5.7.2.2 Modifying A Community Setting . . . . . . . . . . . . . . 94
5.7.2.3 Removing An Existing Community . . . . . . . . . . . . . 94
5.7.3 Trap Destination Tab . . . . . . . . . . . . . . . . . . . . . . . . . 95
5.7.3.1 Enabling Authentication TRAPS. . . . . . . . . . . . . . . 95
5.7.3.2 Adding A Destination . . . . . . . . . . . . . . . . . . . . 95
5.7.3.3 Changing A Destination . . . . . . . . . . . . . . . . . . . 96
5.7.3.4 Removing A Trap Destination . . . . . . . . . . . . . . . . 96
5.7.4 Permitted Hosts Tab . . . . . . . . . . . . . . . . . . . . . . . . . . 97
5.7.4.1 Adding A Host . . . . . . . . . . . . . . . . . . . . . . . . 97
5.7.4.2 Changing A Host . . . . . . . . . . . . . . . . . . . . . . . 98
5.8 Total Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.8.1 Creating A Backup Profile . . . . . . . . . . . . . . . . . . . . . . 99
5.8.2 Restoring A Profile . . . . . . . . . . . . . . . . . . . . . . . . . 102
5.9 APN Manager Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 102
5.9.1 Automatic GSM Setup – Connecting To The Network . . . . . . . 102
5.9.2 Manual GSM Setup – APN Settings Manager . . . . . . . . . . . 103
5.9.3 PIN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
58 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Remote Desktop Connection
5.1 Remote Desktop Connection
Remote Desktop Connection
is a WORKABOUT PRO application used to connect to a
Windows Terminal Server so that you can run a “session” on the Server machine, using the hand-held (Windows CE .NET device).
Refer to the following website for step-by-step information about setting up this connection: http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp
5.2 Pocket PC Compatibility
The WORKABOUT PRO supports the AYGShell API set that allows
PocketPC-compatible applications to run on the hand-held. Microsoft® Windows
CE .NET 4.2 is designed to include application programming interface (API) compatibility support for the Microsoft Windows Powered Pocket PC 2002 shell in units running Windows CE .NET 4.2.
The website below describes the APIs exposed through AYGShell and the application compatibility between Windows Powered Pocket PC 2002-based applications and Windows CE .NET 4.2-based devices: http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dncenet /html/WINCENET_CEPCC_App.asp
5.3 The Control Panel
The
Control Panel
provides a group of icons through which you can set a variety of system-wide properties, such as mouse sensitivity, network configuration and the desktop color scheme.
Note: If you are uncertain how to move around a dialogue box and make selections, review “Using A Dialogue Box” on page 55.
When the WORKABOUT PRO boots up, the startup desktop (shell) is displayed, and any applications stored in the Startup folder start up immediately.
To access the
Control Panel
:
• Use the stylus to tap on the
Start
button in the taskbar to display the
Start Menu
.
Tap on Settings>
Control Panel
.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 59
Chapter 5: Configuration
Control Panel Icons
The
Control Panel
folder contains icons used in the setup of your WORKABOUT PRO.
Figure 5.1 Control Panel
5.4 Control Panel Icons
The
Control Panel
provides a group of icons that allow you to customize and adjust settings on your WORKABOUT PRO.
APN Manager Settings
Allows you to specify the APN (access point name) settings for units equipped with a GSM/GPRS card.
Date/Time
Allows you to set the current Month, Date, Time and Time Zone on the unit.
Display
Changes the appearance (window colour scheme) on the unit desktop.
Keyboard
Toggles character repeat on and off and specifies delay and rate for repeated characters. It also allows you to adjust the keyboard backlight.
60 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Control Panel Icons
Volume & Sound
Allows you to adjust the volume of the sound emitted to indicate events like warnings, key clicks and screen taps. This option also allows you to tailor sounds (wave files) emitted from your WORKABOUT PRO.
Mouse Properties
This icon allows you to customize the sensitivity and speed of the stylus double-tap.
Owner
Provides fields in which you can specify owner information. A ‘
Notes
’ tab allows additional information to be entered and displayed when the unit is powered up. ‘
Network ID
’ tab information is used to access network resources.
(This information should be provided by your System Administrator.)
Password
Allows you to assign a password to restrict access to elements of the unit.
Once assigned, password access cannot be circumvented so it is important that you write down your password and keep it in a safe place. Refer to
“Security Settings” on page 48 for details.
Power
Displays battery pack power status. (Alternately, battery status can be accessed through the taskbar.) The
‘Power Scheme’
tab allows you to determine a suspend states, and the
‘Charger’
tab determines whether or not a battery that requires it, can be recalibrated. (Refer to “Power Saving
Schemes” on page 75 for details.)
Regional Settings
Allows you to specify the local language the display text will use along with the format of numbers, currency, time and date for your region.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 61
Chapter 5: Configuration
Control Panel Icons
Remove Programs
Lists the programs that can be removed from your unit. To remove a program, select it and then click on the
Remove
button.
S tylus
Adjusts how Windows CE .NET recognizes your double-tap (as slow or rapid successive taps).
Under the ‘
Calibration
’ tab, you can recalibrate your touchscreen by tapping on the ‘Recalibrate’ button and following the directions on the calibration screen.
System
Displays system and memory properties. Under the
Memory
tab, you can allocate memory between storage memory and program memory.
Dialing
Specifies dialing settings, including area code, country code, dial type and the code to disable call waiting. You can store multiple patterns – for example, ‘Work’, ‘Home’, and so on using this dialogue box.
Certificates
A public key is transmitted as part of a certificate. The certificate assigned through this icon is used to ensure that the submitted public key is, in fact, the public key that belongs to the submitter. The client checks that the certificate has been digitally signed by a certification authority that the client explicitly trusts. “Certificate Assignment” on page 77 directs you to the appropriate setup information.
PC Connection
Enables direct connections to a desktop computer. Selecting the ‘
Change Connection
’ button allows you to change the type of direct connect to your PC.
62 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Control Panel Icons
Teklogix Scanners
If your WORKABOUT PRO is equipped with a scanner, this option provides the set up parameters and choose the bar code symbologies that the unit will successfully read.
Network And Dial-up Connections
Displays a network window from which the radio can be configured and an existing configuration can be executed.
Internet Options
Used to configure your Internet browser including options such as identifying the default and search page that the browser applies when connecting to the Internet, setting the cache size, specifying the Internet connection options, and defining the security level that is applied when browsing.
SNMP
SNMP (Simple Network Management Protocol) is the protocol used to monitor and manage devices attached to a TCP/IP network.
Bluetooth
A short-range wireless technology that enables data communication between devices. It also provides the capability to use a Bluetooth-enabled cellular phone as a data modem, exchanging information with other Bluetooth devices and providing network access.
Total Recall
Total Recall is a Psion Teklogix utility developed to maintain the persistence of installed applications and settings over cold boots. This is based on a backup and restore concept and is extended to incorporate many advanced features.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 63
Chapter 5: Configuration
Basic Setup
5.5 Basic Setup
5.5.1 Display Properties
• In the
Control Panel
, choose the
Display
icon.
Figure 5.2 Choosing The Display Icon
5.5.1.1
Display Contrast
The
Contrast
tab allows you to adjust the display contrast to suit the environment in which you are using the hand-held. Keep in mind that contrast adjustments only an affect monochrome displays.
• In the Display Properties dialogue box, open the Contrast tab.
Figure 5.3 Display Contrast Properties
64 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Display Backlight
Sliding bar in the
Contrast
tab to the left decreases or darkens the display contrast.
Sliding the bar to the right to increases or lightens the display contrast.
5.5.1.2
Display Backlight
The
Display Properties
dialogue box in the
Control Panel
allows you to specify the intensity of the backlight along with the duration of time it stays on after an event like a key press or scanner trigger.
Note: Keep in mind that this option may be restricted to supervisory use only.
• In the Display Properties dialogue box, open the Backlight tab.
Figure 5.4 Display Backlight Properties
Note: Backlight changes take affect immediately. You do not need to reset the WORKABOUT PRO.
Intensity
This parameter is used to adjust the light intensity of the backlight. Sliding the bar to the left lowers the light intensity, and sliding it to the right raises the intensity.
Bright For
The value chosen from this dropdown menu determines the duration of time that the backlight stays on at the configured intensity when a unit is not in use.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 65
Chapter 5: Configuration
Display Appearance
Dim For
The value chosen from this dropdown menu determines the duration of time that the backlight stays on at half the configured intensity (dimmed backlight) when a unit is not in use.
External Power Checkbox
When you select (
√
) the checkbox next to
‘When using external power keep the backlight always ON.
’, the backlight remains ON at the configured intensity when the
WORKABOUT PRO is operating with external power (not battery power). If power is being drawn from the battery, this option is ignored and the other parameters defined in
Display Properties
dialogue box take affect.
5.5.1.3
Display Appearance
• In the Display Properties dialogue box, open the Appearance tab.
Figure 5.5 Display Appearance Properties
This dialogue box allows you to customize the display colour scheme.
66 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
5.5.2 Keyboard Properties
This icon displays the Keyboard Properties dialogue box in which you can adjust the repeat rate of the keys, the intensity of the keyboard backlight and the behaviour of the <BLUE> and <ORANGE> modifier keys. This dialogue box also allows you to define macro keys and Unicode characters.
• In the
Control Panel
, choose the
Keyboard
icon.
Figure 5.6 Choosing The Keyboard Icon
5.5.2.1
Key Repeat
• In the Keyboard Properties dialogue box, open the Repeat tab.
Figure 5.7 Key Repeat Properties
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 67
Chapter 5: Configuration
Keyboard Backlight
Repeat Delay
The value assigned for this parameter determines the delay in milliseconds between repeat characters. Sliding the
Repeat Delay
bar to the left increases the delay between key repeats while sliding the bar to the right shortens the repeat delay time.
Repeat Rate
The value assigned for the
Repeat Rate
parameter determines how quickly the key you press repeats and is measured in characters per second (cps). Sliding the bar to the left slows the repeat rate, and sliding the bar to the right increases the repeat rate.
Note: Use the field at the bottom of this dialogue box to test the repeat delay and rate settings you’ve chosen.
5.5.2.2
Keyboard Backlight
• In the Keyboard Properties dialogue box, open the Backlight tab.
Figure 5.8 Keyboard Backlight Properties
Intensity
This parameter is used to adjust the light intensity of the keyboard backlight. Sliding the bar to the left darkens the keyboard backlight intensity, and sliding it to the right lightens the intensity.
ON Time
The value chosen from this dropdown menu determines the duration of time that the keyboard backlight stays on when a unit is not in use.
68 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard One Shot Modes
5.5.2.3
Keyboard One Shot Modes
• In the Keyboard Properties dialogue box, open the One Shots tab.
Figure 5.9 Keyboard One Shot Properties
When these options are enabled (
√
), the <ORANGE> and <BLUE> keys only remain active until the next key is pressed. If the ‘One Shots’ options are disabled
(the checkbox is left blank), the <ORANGE> and <BLUE> keys are locked ‘on’ when pressed only once; they remain ‘on’ until they are pressed a second time to unlock them.
Note: Keep in mind that checking the taskbar lets you know whether or not these keys are locked on. When the <ORANGE> and <BLUE> keys are locked ‘on’, the taskbar at the bottom of the screen displays them in uppercase characters –
ORANGE KEY
and
BLUE KEY. If
these keys are displayed in lowercase characters in the taskbar, you’ll know that the
orange key
and the
blue key
are not locked. They will become inactive following a key press.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 69
Chapter 5: Configuration
Keyboard Macro Keys
5.5.2.4
Keyboard Macro Keys
• In the Keyboard Properties dialogue box, open the Macros tab.
Figure 5.10 Macro Dialogue Box
A macro has 20 programmable characters (or “positions”). The macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys including <ENTER>, <BKSP> and <DEL> (<BLUE>-<BKSP>), function keys and arrow keys.
Recording And Saving A Macro
You can program up to 3 macro keys.
• In the Macro: menu, highlight a macro key number – for example, macro 1 to assign a macro to macro key <M1> .
Tap on the
Record Macro
button.
A message screen is displayed instructing you to ‘Please Enter Key Strokes’.
Figure 5.11 Recording A Macro
70 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Unicode Mapping
• Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro.
• When you’ve finished recording your macro sequence, press the key sequence – <CTRL> <ALT> <ENTER>.
A new screen displays the macro sequence you created. The
Save Macro
button is highlighted.
• Tap on
Save Macro
to save your macro.
Note: If you want to discard the macro you’ve just created, tap on the
Discard Macro
button.
Executing A Macro
• Press the macro key to which you’ve assigned the macro. For example, if you created a macro for macro key ‘1’, press <M1> to execute the macro.
Deleting A Macro
• In the
Macros
tab, use the stylus to highlight the macro number you want to delete.
• Tap on the
Delete Macro
button, and press <ENTER>.
5.5.2.5
Unicode Mapping
• In the Keyboard Properties dialogue box, open the Unicode Mapping tab.
Figure 5.12 Unicode Mapping
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 71
Chapter 5: Configuration
Unicode Mapping
The
Unicode Mapping
tab is used to map combinations of virtual key values and
<CTRL> and <SHIFT> states to Unicode™ values. This tab shows the configured
Unicode character along with the Unicode value. For example, the sample screen above shows “a (U+0061)” indicating that the character “a” is represented by the
Unicode value “0061”, and so on. Keep in mind that Unicode configurations are represented as hexidecimal rather than decimal values.
All user-defined Unicode mappings are listed in the
Unicode Mapping
tab in order of virtual key value, and then by order of the shift state. If a Unicode mapping is not listed, the Unicode mapping is mapped to the default Unicode value.
Adding And Changing Unicode Values
Important: Changes to Unicode mappings are not saved until you exit the
Keyboard Properties
dialogue box.
• Tap on the
Add/Change
button.
Figure 5.13 Adding And Change Unicode Values
• Highlight a value in the Unicode mapping list – in the sample screen above, a value will be assigned to virtual key 0 (VK 0).
• Position the cursor in the ‘Unicode Mapping’ field and type a Unicode value for the highlighted key.
Note: To add a shifted state – <SHIFT> and/or <CTRL>, tap the stylus on the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’.
72 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Volume And Sound Properties
Removing Unicode Values
• In the ‘Unicode Mapping’ tab, highlight the item you want to delete, and tap the
Remove
button.
5.5.3 Volume And Sound Properties
• In the
Control Panel
, choose the
Volume & Sounds
icon.
Figure 5.14 Choosing The Volume Icon
5.5.3.1
Volume Adjustments
Figure 5.15 Volume Settings
• Slide the volume button to the left to lower the beeper volume or to the right to increase the beeper volume.
• Under the heading
‘Enable sounds for:’
, enable (
√
) the conditions under which you want the WORKABOUT PRO to emit a beep.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 73
Chapter 5: Configuration
Power Management Properties
5.5.4 Power Management Properties
This icon displays a Power Properties dialogue box that indicates the unit’s battery capacity and allows you to manage battery use.
• In the
Control Panel
, choose the
Power
icon.
Figure 5.16 Choosing The Power Icon
5.5.4.1
Battery Capacity
• In the Power Properties dialogue box, open the Battery tab.
Figure 5.17 Power Battery Properties
The
Battery
tab details information about the battery installed in your WORKABOUT
PRO.
74 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
5.5.4.2
Power Saving Schemes
• In the Power Properties dialogue box, open the Schemes tab.
Chapter 5: Configuration
Power Saving Schemes
Figure 5.18 Power Scheme Properties
Power Scheme
This dropdown menu allows you to specify whether the unit is using
AC Power
or
Battery Power
.
Switch State To Suspend
Important: If a WORKABOUT PRO is using battery power, Psion Teklogix recommends setting the Suspend value to 10 minutes. Setting
‘Switch State To Suspend’ to values greater than 10 or setting the suspend state to ‘Never’ will adversely affect the battery run time.
To further reduce power consumption, carefully consider the duration of time that the display backlight is ‘on’ (see “Display
Backlight” on page 65).
When the WORKABOUT PRO is idle – not receiving any user input (a key touch, a scan, and so on) or system activity (serial data, an activity initiated by an application, and so on), the hand-held uses the value assigned in the
Switch State To
Suspend
field to determine when the unit will go to sleep (appear to be off).
When the time in the
Suspend
field elapses without any activity, the unit enters
Suspend
state. In
Suspend
state, the WORKABOUT PRO CPU enters a sleep state, and any radios are shut off. The state of the device (RAM contents) is preserved. Pressing
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 75
Chapter 5: Configuration
Stylus Properties
<ENTER> wakes the system from suspend state. When the unit is in suspend state, the network connection will not be broken immediately. If the connection is dropped, you must re-establish the network connection.
5.5.5 Stylus Properties
Note: Touchscreen calibration may not be enabled on your unit. If your screen appears to require recalibration, contact your supervisor.
• In the Control Panel , choose the Stylus icon.
Figure 5.19 Stylus Icon
5.5.5.1
Setting Double-Tap Sensitivity
• In the
Double-Tap
tab, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen.
Figure 5.20 Setting Stylus Sensitivity
76 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Touchscreen Calibration
5.5.5.2
Touchscreen Calibration
Touchscreens rarely require recalibration. However, if your touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow the directions below.
• Choose the Calibration tab and then tap on the Recalibrate button.
Figure 5.21 Calibrating The Touchscreen
• Follow the directions in the
Calibration
tab to recalibrate the screen.
5.5.5.3
Touchscreen Options
This tab allows you to disable the touchscreen.
• Choose the
Options
tab and then tap on the
‘Disable the touch panel’
checkbox.
5.5.6 Certificate Assignment
• In the Control Panel , choose the Certificate icon.
Figure 5.22 Certificate Icon
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 77
Chapter 5: Configuration
Bluetooth Setup
The dialogue box is used in conjunction with 802.1x authentication to enhance security.
Figure 5.23 Certificates Dialogue Box
For a detailed description about
Certificate
setup for both the server and client-side devices (WORKABOUT PROs), refer to the following website:
www.microsoft.com/windows2000/techinfo/planning/walkthroughs/default.asp - "Security Services"
Note: When importing certificates, the unit only recognizes .cer files.
5.6 Bluetooth Setup
Bluetooth is a global standard for wireless connectivity for digital devices and is intended for Personal Area Networks (PAN). The technology is based on a short-range radio link that operates in the ISM band at 2.4 GHz. When two
Bluetooth-equipped devices come within a 5 meter range of each other, they can establish a connection. Because Bluetooth utilizes a radio-based link, it does not require a line-of-sight connection in order to communicate.
78 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
The Devices Tab
Note: The Bluetooth radio card uses an internal antenna.
• In the
Control Panel
, choose the
Bluetooth Device Properties
icon to display the
Bluetooth Manager
screen.
Figure 5.24 Bluetooth Icon
The
Bluetooth Controls
dialogue box is used to display the other Bluetooth devices with which you can communicate.
Figure 5.25 Bluetooth Devices Tab
5.6.1 The Devices Tab
Scan
• Click on the <
Scan
> button to list available devices.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 79
Chapter 5: Configuration
The Devices Tab
Wait for the WORKABOUT PRO to complete its scan (approximately 20 seconds).
When scanning starts, the
<Scan>
button will change to
<Stop>
– if necessary, you can tap on this button to stop the process. Once scanning is complete, all discovered devices will be displayed in the list box, with Name, Address, Active status, and
PIN information.
Note: During the scanning process, addresses are located first, followed by names. Therefore, only the names of devices that are within the Bluetooth radio coverage range will be retrieved.
The Active column indicates whether any service is activated for that device. When a service is activated, the device is displayed in the list even when it is not detected during the scan.
The PIN column indicates whether you have a PIN (password) set for the device.
At this point you can either query for services or set the PIN for each device. Once you highlight a device in the list box, both the
<Services>
and
<Set PIN>
buttons become available.
Services
A discovered device may display several service profiles that it can use to communicate, and you will want to activate the type you need. Supported profiles that can be activated include: DUN (Dial-Up Networking service), Printer (serial service), and LANPPP (LANAccessUsingPPP service). ASync (ActiveSync) is another available profile.
• To start the service scan, highlight a device in the
Devices
tab list, and then click on the
<Services>
button or double-click on the device entry.
Note: If the remote device is out of reach or turned off, it can take a considerable amount of time for the Services dialogue box to appear – it may appear to be frozen.
Once the device’s service profiles are displayed in the Services list box:
• Highlight the desired service, and then click on <
Activate>
or <
Deactivate>
, as required.
Once the service is successfully activated, the assigned port (if applicable) will appear in the Port column of the Services list box. You can choose to use BSP or
COM as the port name. BSP is the latest Microsoft Bluetooth stack standard, but
80 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
The Devices Tab older applications assume serial ports are COM. When using COM as the port name, the Bluetooth manager will try to find and use a free port between COM7 and
COM9. When using BSP as the port name, BSP2 to BSP9 are available for use. The port is available as soon as it is activated.
Note: The CH column shows the RFCOMM channel of the service IF the service is RFCOMM-based. This information is not generally needed except for debugging purposes.
The Authentication and Encryption options can be changed only before activation.
To change those after activation, deactivate the service first, then change the options.
Once a service is activated, all the information regarding the service, including the
RFCOMM channel number, is saved in the registry. (Some remote devices may change their RFCOMM channel numbers when they reboot, so your saved setting may not work when the remote device is rebooted. In that case, you must deactivate the service and reactivate it to detect the current RFCOMM channel.)
Set PIN
PINs can be set for each device by pressing the
<Set PIN>
button in the
Devices
tab, or you can skip this step and try to connect to the device first.
Important: The remote device must have authentication enabled, otherwise the PIN authentication will fail.
• Highlight a device, click on the <
Set Pin>
button, and type the PIN.
You will receive a message, either that the PIN has been successfully validated or that it has been rejected.
If the PIN has been validated, an asterisk (*) appears in the PIN column in the
Devices list box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in the registry.
To remove the PIN:
• Click on <
Set PIN>
and press <ENTER>.
If the WORKABOUT PRO attempts to connect to a remote device that has
Authentication enabled and does not have a required PIN set, an Authentication
Request dialogue box appears.
• Enter the PIN, and click on <OK> to connect the devices.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 81
Chapter 5: Configuration
The Server Tab
5.6.2 The Server Tab
Figure 5.26 Bluetooth Servers Tab
The Bluetooth connection is initiated from your WORKABOUT PRO to the remote device – therefore the WORKABOUT PRO is called the ‘client’ and the remote is called the ‘server’. The
Servers
tab displays the server profiles that can be activated in your WORKABOUT PRO. There is currently one server profile available: Serial.
• Tap on the checkbox to activate (
√
) the server, and it will display the associated port name beside the server name.
Once you activate a server profile, it is recommended that the WORKABOUT PRO be rebooted before you try to bond from a server.
Note: You do not need to reboot if you are deactivating a server.
82 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
5.6.3 The Property Tab
Chapter 5: Configuration
The Property Tab
Figure 5.27 Bluetooth Servers Tab
The
Property
tab displays information about your WORKABOUT PRO, and provides some port options.
The Device Name field shows the device name of your WORKABOUT PRO. This name can be changed (see the Note in this section for details).
Device Class shows the Class of Device (e.g. desktop, hand-held), which is always set to Handheld.
Local Bluetooth Address shows the address of your WORKABOUT PRO radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is set to BSP, BSP2 to BSP9 are available for activated services (including the server).
When COM is chosen, COM7 to COM9 are available.
The Connection list table shows the Name, Address, and Type of the currently active connections. The table is periodically updated while on display, but it can take a few seconds before it reflects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning as well as the service connections.
Note: You can change the device-name and description of your radio by clicking on the
System
icon in
Control Panel
, which will open the
System Properties
dialogue box. Click on the
Device Name
tab to access the menu and change your
settings. Then click on OK.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 83
Chapter 5: Configuration
The Bluetooth GPRS Phone
Although the name will have changed in the Property menu in Bluetooth
Controls, the radio only reads it on boot-up. For the changes to take effect, you must reset the WORKABOUT PRO.
5.6.4 The Bluetooth GPRS Phone
Once you’ve completed the Bluetooth settings described beginning on page 78, you can go ahead and set up communication through your GPRS phone.
1. To set up the internet parameters, select the
Network And Dial-up Connections
icon from the
Control Panel.
Figure 5.28 Network And Dial-up Connection Icon
2. Select the
Make New Connection
icon.
Figure 5.29 Creating A GPRS Connection
84 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
The Bluetooth GPRS Phone
3. In the
Make New Connection
dialogue box, choose
Dial-Up Connection
.
Enter a name for your GPRS network connection.
Figure 5.30 Setting Up The Connection
4. Highlight the
Next>
button, and press <ENTER> to display the
Modem
dialogue box.
Figure 5.31 Setting Up The Modem
5. In the dropdown menu labelled
Select a modem:
, choose the name of the modem with which you want to connect, and then choose the
Configure
button to display the
Device Properties
dialogue box.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 85
Chapter 5: Configuration
The Bluetooth GPRS Phone
The WORKABOUT PRO communicates with your phone and retrieves the parameters for the
Device Properties
dialogue box. The unit then disconnects.
Figure 5.32 Port Settings
6. Under the
Call Options
tab, turn off
Cancel the call if not connected within
... and press <ENTER> to save your changes.
Figure 5.33 Call Options
86 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
The Bluetooth GPRS Phone
7. In the
Modem
dialogue box, select the
Next>
button to display the
Phone
Number
dialogue box.
Figure 5.34 Setting The Phone Number
The phone number you enter is network carrier dependent. Once you’ve specified all the necessary information, choose the
Finish
button.
8. In the
Control Panel
, choose the
Dialing
icon.
Figure 5.35 Dialing Icon
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 87
Chapter 5: Configuration
The Bluetooth GPRS Phone
9. The values in the
Dialing Properties
dialogue box need to be edited according to your network carrier specifications.
Figure 5.36 Setting Up Dialing Properties
Once you’ve edited this dialogue box to reflect your network carrier requirements, press <ENTER> to save your changes.
10. At this point, you’ll need to return to the
Control Panel
and select the
Network and Dial-up Connections
icon.
11. In the network connection window, the new network configuration – in this case –
GPRS Network
– is displayed. Choose the new icon.
Figure 5.37 GPRS Network Connection
88 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
The Bluetooth GPRS Phone
This onscreen message indicates the status of your connection – connected, disconnected, error messages, and so on.
Figure 5.38 Successful Connection
• Select the
Hide
button to move this message to the background.
You can now access the internet.
Figure 5.39 Accessing The Internet
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 89
Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
5.7 SNMP (Simple Network Management Protocol) Setup
Simple Network Management Protocol (SNMP) is the protocol used to monitor and manage devices attached to a TCP/IP network (providing they support SNMP).
SNMP uses Management Information Bases (MIBs) that define the variables an
SNMP Network Management Station can access. Each product has a defined set of
MIBs that determine how SNMP operates, the type of access allowed and so on.
All Teklogix products support the TEKLOGIX-GENERIC-MIB – a MIB that defines some common features across Teklogix products. All devices also support
MIB-II, a management information base that defines the common features of
TCP/IP networks. The SNMP Agent software embedded in the WORKABOUT
PRO supports SNMPv1 (RFC 1157).
• In the
Control Panel
, choose the
SNMP
icon.
Figure 5.40 SNMP Icon
90 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
5.7.1 Contact Tab
The
SNMP
dialogue box is displayed.
Chapter 5: Configuration
Contact Tab
Figure 5.41 Contact Tab
Contact
This field identifies the contact person for this managed node along with information about how to get in touch with this person. The content of this parameter is accessible through MIB-II’s sysContact object.
Location
This parameter is used to identify the physical location of this node (e.g., Warehouse
A: Pillar 32B). The content of this parameter is accessible through MIB-II’s sysLocation object.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 91
Chapter 5: Configuration
Communities Tab
5.7.2 Communities Tab
Figure 5.42 Community Settings
The “Communities” tab provides a means of limiting access to SNMP managed devices to those SNMP Managers with matching “community names”, as specified by RFC 1157.
Enable SNMP
Enabling (
√
) ‘
Enable SNMP
’ allows the device to respond to SNMP queries and to send
Traps. After enabling this option and rebooting the device, the SNMP Agent will automatically start up. To disable this feature, remove the check mark from the check box.
92 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
5.7.2.1
Adding A Community
• Choose the
Add
button to add a new ‘community’.
Chapter 5: Configuration
Adding A Community
Figure 5.43 Adding A Community
Name
The value assigned here is the name assigned by the network administrator to the set of devices to which this managed node belongs.
Rights
This menu allows you to specify access – that is, ‘Read-Only’ or Read-Write’
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 93
Chapter 5: Configuration
Modifying A Community Setting
5.7.2.2
Modifying A Community Setting
To modify an existing community:
• Highlight the community you want to alter.
• Tap the
Change
button.
Figure 5.44 Changing Or Removing A Community
A
Modify Community
dialogue box is displayed, listing the community you highlighted.
• Edit the
Name
and/or
Rights
, and press <ENTER> to save your changes.
5.7.2.3
Removing An Existing Community
To remove an item:
• Highlight the community you want to remove in the
Communities
tab and then choose the
Remove
button.
A
Delete Confirmation
screen is displayed.
• To remove a community, tap the
Yes
button.
• If you decide not to remove the community, tap the
No
button.
94 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Trap Destination Tab
5.7.3 Trap Destination Tab
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running on the managed node. This option allows you to define where the report will be sent.
Figure 5.45 Trap Destination Tab
5.7.3.1
Enabling Authentication TRAPS
Enabling (
√
)
‘Enable Authentication TRAPS’
allows authorization traps to be sent when a failure is detected (e.g., an SNMP message received with a bad community name).
5.7.3.2
Adding A Destination
To add a new destination:
• Tap on the
Add
button.
Figure 5.46 Adding A Trap Destination
• Type a destination in the text box provided, and press <ENTER>.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 95
Chapter 5: Configuration
Changing A Destination
5.7.3.3
Changing A Destination
To change an existing trap destination:
• Highlight the destination you want to alter in the
Trap Destination
tab, and then tap on the
Change
button.
A dialogue box like the one displayed when you add a destination is displayed.
Figure 5.47 Changing A Destination
• Make the changes to the destination, and press <ENTER> to save the changes.
5.7.3.4
Removing A Trap Destination
To remove a trap destination:
• In the
Trap Destination
tab, highlight the destination you want to delete.
• Tap on the
Remove
button.
A
Delete Confirmation
screen is displayed.
• To remove a destination, tap on the
Yes
button.
• If you decide not to remove the destination, tap on the
No
button.
96 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Permitted Hosts Tab
5.7.4 Permitted Hosts Tab
For security reasons, the Network Administrator may want to restrict SNMP-node access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Managers which are allowed to monitor and manage this device. If no entries are listed, the device will accept SNMP queries from any host.
Figure 5.48 Permitted Hosts Tab
5.7.4.1
Adding A Host
To add a new host:
• Tap on the
Add
button.
Figure 5.49 Adding A Host
• Type a new host IP address in the text box provided, and press <ENTER>.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 97
Chapter 5: Configuration
Changing A Host
5.7.4.2
Changing A Host
To change an existing host IP address:
• Highlight the IP address you want to alter in the
Permitted Hosts
tab, and then tap on the
Change
button.
A dialogue box like the one displayed when you add a host is displayed.
• Make the necessary changes, and press <ENTER>.
5.8 Total Recall
Total Recall
is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept and is extended to incorporate power advanced features.
• In the
Control Panel
, choose the
Total Recall
icon.
Figure 5.50 Total Recall Icon
98 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
5.8.1 Creating A Backup Profile
Chapter 5: Configuration
Creating A Backup Profile
Figure 5.51 Backup Profile
In the dropdown menu, you can choose from four options:
Create Backup Profile
,
View
Selected Profile
,
Restore Selected Profile
and
Delete Selected Profile
. Keep in mind however that until a profile is created, the only available option is
Create Backup Profile.
• Tap on the
<Next>
button to begin the process.
Figure 5.52 Profile Details
Profile Information
This dialogue box lists the possible storage destinations for the profile file.
• To begin, type a name for the profile in the field labelled
Profile Name
.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 99
Chapter 5: Configuration
Creating A Backup Profile
This dialogue box also lists the image type –
OS Version
and
Registry Type
for the
WORKABOUT PRO.
• Tap on the icon to expand your settings for
AutoRetore Profile
and
Profile
Location
.
-
Figure 5.53 Profile Options
Not an AutoRestore Profile
– creates a backup that is manually restored by the operator.
-
-
AutoRestore Profile for this device only
– creates a profile that automatically restores itself following a cold boot.
Clone Profile for other devices
– creates a profile that automatically restores after resuming from a cold boot, but it will not contain the touch screen calibration coordinates or the Wireless radio settings.
-
Profile Location
– allows the operator to specify where the profile is to be saved. The location for the profile will typically be Flash or a
Storage card.
• Tap on the <
Next
> button to display the next dialogue box –
Add Files.
Add Files
Figure 5.54 Adding Files
100 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Creating A Backup Profile
By default,
All Files:
is selected so that all installed or copied files, database entries, and the Registry will be saved. You can, however, limit the backup to database, and/or the registry only.
• Tap on the <
Next
> button to view your selections.
View Selections
Depending on what you have selected for inclusion in your profile, you can view a list of the selected files, databases, and/or registry.
Figure 5.55 Viewing Selections
• Tap on the <
Next
> button to perform the operation.
Performing The Backup
Figure 5.56 Performing The Backup
• Tap on Select the <
Backup To \Flash
> or <
\Storage Card
> button to start the process and create a profile.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 101
Chapter 5: Configuration
Restoring A Profile
5.8.2 Restoring A Profile
Figure 5.57 File Restoration
To manually restore a profile:
• Choose
Restore Selected Profile
from the dropdown menu, and select the
Profile
Name
displayed in the drop down box.
Note: You can also manually restore an auto restore profile located in flash or a storage device.
5.9 APN Manager Settings
The
APN Settings Manager
icon in the
Control Panel
is used to set up APN (Access Point
Name) settings for units equipped with GSM/GPRS radios.
Important: Typically, APN setup information is automatically configured for you. The
APN Manager Settings
icon is only necessary if automatic setup fails.
5.9.1 Automatic GSM Setup – Connecting To The Network
When you initially attempt to connect to a network using a GSM radio, a dialogue box is displayed asking if you would like your GSM automatically configured.
1. Choose
Yes
to initiate automatic configuration.
2. In the
Start Menu
, choose Settings > Network...
and in the connection window, double-tap on the
GPRS
icon that has been set up for you.
3. In the
Dial-Up
dialogue box, tap on the <
Connect
> button.
102 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
Manual GSM Setup – APN Settings Manager
PIN (Personal Identification Number) Request
The SIM (Subscriber Identity Module) card in your unit may be password protected.
In this case, a dialogue box will appear, requesting that you enter your PIN
(Personal Identification Number).
1. Type the PIN assigned to your unit SIM.
2. In the
Start Menu
, choose Settings > Network...
and in the connection window, double-tap on the
GPRS
icon that has been set up for you.
3. In the
Dial-Up
dialogue box, tap on the <
Connect
> button.
5.9.2 Manual GSM Setup – APN Settings Manager
Note: Before using the APN Manager, close any active connections.
• In the
Control Panel
, choose the
APN Manager Settings
icon.
Figure 5.58 APN Manager Settings Icon
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 103
Chapter 5: Configuration
Manual GSM Setup – APN Settings Manager
If automatic configuration has failed, you’ll need to set up your details manually, using the APN (Access Point Name) settings tab.
Figure 5.59 APN Settings Tab
• Tap on the <
Add
> button.
Figure 5.60 Adding A New APN
• In the
Add/Edit APN
dialogue box, type a new APN, and tap on <
OK
>.
104 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
PIN Settings
Your new APN is added to the ‘List of Possible APNs’ under the
APN Settings
tab.
New APN
Figure 5.61 Adding A New APN
• To use your new APN, tap on the <
Active
> button.
Note: To avoid overwriting your newly created APN, disable the checkbox next to ‘
Enable APN for auto configuration
’.
5.9.3 PIN Settings
The
Pin Settings
tab is used to change, enable or disable the PIN (Personal
Identification Number) assigned to your SIM card.
Figure 5.62 PIN Settings Tab
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual 105
Chapter 5: Configuration
PIN Settings
To change your PIN:
• Type your existing PIN in the text box labelled
Current PIN
.
• Type the new PIN in the text box labelled
New PIN
.
Enabling (
√
)
Enable PIN Support.
activates the PIN entry requirement – each time you connect to a network, your PIN will be requested. Leaving this checkbox unchecked disables PIN requirement.
Note: Some SIM cards do not allow the PIN support to be disabled.
Enabling (
√
)
Save PIN for auto configuration.
causes the PIN to be stored in the hand-held.
At power up, the PIN is automatically submitted to the modem.
Important: Keep in mind that if the WORKABOUT PRO is starting from a
‘cold reboot’, the PIN is deleted. If unauthorized use of the hand-held is a serious issue at your site,
Save PIN for auto configuration
should be disabled.
106 Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Rugged design
Bright, easy-to-read display
Full QWERTY keyboard
Supports various expansion modules
Compatible with docking stations
Bluetooth wireless connectivity
SD/MMC card slot for additional memory
Windows CE .NET operating system
One-year return-to-factory warranty
Frequently asked questions
The WORKABOUT PRO M/C uses a lithium-ion battery. To charge the battery, simply place the device in the docking station or use the single battery charger. The charge status is indicated by LEDs on the charger or dock.
The WORKABOUT PRO M/C can accommodate a variety of expansion modules, including PCMCIA, GSM/GPRS, and SE 1223HP scanner modules. These modules can enhance the device's functionality for specific applications.
You can connect the WORKABOUT PRO M/C to a computer using the docking station or a USB cable. Microsoft® ActiveSync® is used to transfer files between the device and the computer.
