Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
Oglas
Oglas
WORKABOUT PRO S
Hand-Held Computer
Quick Reference Guide
June 23, 2006 PN 8100004.A
ISO 9001 Certified
Quality Management System
© Copyright 2006 by Psion Teklogix Inc., Mississauga, Ontario, Canada
This document and the information it contains is the property of Psion
Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are the property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited
Warranty and Limitation of Liability provided at www.psionteklogix.com/ warranty. (If you are not already a member of Teknet and you attempt to view this warranty, you will be asked to register. As a member of Teknet, you’ll have access to helpful information about your Psion Teklogix products at no charge to you.) In some regions, this warranty may exceed this period. Please contact your local Psion Teklogix office for details. For a list of offices, refer
to “Support Services & Worldwide Offices” on page 28. The warranty on
Psion Teklogix manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an authorized Psion Teklogix service organization. See Psion
Teklogix terms and conditions of sale for full details.
Important:
Psion Teklogix warranties take effect on the date of shipment.
Service
Psion Teklogix provides a complete range of product support services to its customers. For helpful information about accessing our services, please refer to the WORKABOUT PRO C, M-E & S Hand-Held Computer Regulatory &
Warranty Guide, PN 8000084.
Disclaimer
Every effort has been made to make this material complete, accurate, and upto-date. In addition, changes are periodically added to the information herein; these changes will be incorporated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for any damages, including but not limited to consequential damages, caused by reliance on the material presented, including but not limited to typographical errors.
Table Of Contents
1. Basic Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Installing The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Switching The Unit On. . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 Switching The Unit Off (Suspend). . . . . . . . . . . . . . . . 4
2. Getting To Know The WORKABOUT PRO S. . . . . . . . . . . 5
2.1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2.1 Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2.2 The Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.3 Adjusting The Keypad Backlight. . . . . . . . . . . . 10
2.3 The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.3.2 Calibrating The Touchscreen . . . . . . . . . . . . . . . 12
2.4 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.4.1 The LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.4.2 Onscreen Indicators . . . . . . . . . . . . . . . . . . . . . . 14
2.4.3 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. Navigating In Windows CE . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.1 Navigating A Touchscreen . . . . . . . . . . . . . . . . . . . . . . 17
3.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . 17
3.3 The Startup Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.3.1 Accessing Desktop Icons . . . . . . . . . . . . . . . . . . 19
3.3.2 The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.4 The Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 1
3.5 Using A Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4. General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . . 27
4.2 Cleaning The WORKABOUT PRO S . . . . . . . . . . . . . 27
5. Support Services & Worldwide Offices . . . . . . . . . . . . . . . . 28
2 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
Thank you for choosing the WORKABOUT PRO. You’ve purchased a flexible hand-held computer with a wide range of options that make configuring and upgrading the unit fast and easy, enabling you to meet your changing needs now and in the future.
1. Basic Preparation
Thank you for choosing the WORKABOUT PRO.You’ve purchased a hand-held with a wide range of options to help you tailor the unit to meet your exact requirements now and in the future.
Your WORKABOUT will provide many years of productive use.
Important:
All approval and safety information is outlined in the
‘WORKABOUT PRO C, M-E & S Regulatory & Warranty
Guide’, PN 8000084. It is important that you review all safety guidelines before charging a battery or operating
a scanner.
This quick start guide provides basic information on the operation and features of the Psion Teklogix WORKABOUT PRO S Hand-
Held Computer. For more detailed information, refer to the WORK-
ABOUT PRO M-E, C & S Hand-Held Computer User Manual or the documentation supplied with the application you are using.
Typically, WORKABOUT PRO S hand-helds are configured at the factory and arrive ready for use.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be fully charged prior to use. Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed.
Keep in mind also that, along with the main battery, the WORKA-
BOUT PRO S is equipped with an internal, backup battery that preserves data stored on the unit while the main battery is swapped.
Important:
The backup battery is trickle charged from the main battery.
To maximize battery life, avoid excessive discharging and
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 3
4
recharging of the backup battery by keeping the main battery fully charged.
IF YOU ARE POWERING UP A NEW UNIT, a warning message may appear on the screen indicating that the backup battery capacity is low. To recharge the backup battery, you must fully charge the WORKABOUT PRO with the main battery installed in the unit. An overnight charge is recommended.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counterclockwise to unlock the cover and remove it. The top of the stylus is shaped to help you loosen the fasteners.
• Insert the charged battery. Replace the battery cover, and turn the fasteners at the base of the battery cover clockwise to lock the battery in place.
Note: If you are using a docking station, you can insert an
uncharged battery, dock the unit and switch it on.
1.3 Switching The Unit On
• Press and hold down the [ENTER/ON] key for at least one second to switch the unit on.
• When the LED flashes green, release [ENTER/ON].
The startup desktop is displayed.
Note: If the unit was already in use – the unit may be off (suspend
state) – pressing [ENTER/ON] ‘wakes’ the unit from this state. The screen in which you were working prior to the suspend state is displayed.
1.4 Switching The Unit Off (Suspend)
• Press the [FN/BLUE] key, and then press [ENTER/ON] to switch off the WORKABOUT PRO S.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
2. Getting To Know The WORKABOUT PRO S
2.1 Features
Speaker
Stylus
(pointing tool)
LED
(Light Emitting
Diode)
Microphone
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 5
Battery Cover
Fasteners
WORKABOUT PRO S
BACK
Battery Cover
Back Cover optional scanner module fits here
End Cap
WORKABOUT PRO S -
BOTTOM
Tether Port
Low Insertion
Force (LIF) Port
Audio Jack
6 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
2.2 The Keyboard
Scan Keys Scan Keys
Display
Backlight Key
Arrow Keys
FN/Blue Key
ALPHA/
Orange Key
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 7
The keyboard is equipped with a set of standard keys along with a
[ALPHA/ORANGE] and a [FN/BLUE] modifier key to provide access to additional keys and system functions. These extra keys are colour coded in orange and blue print above the standard keys.
2.2.1
Modifier Keys
The [CTRL], [ALT], [ALPHA/ORANGE] and [FN/BLUE] keys are
modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, alpha keys are displayed in orange print above the numeric key [1]. Pressing the [ALPHA/ORANGE] key followed by the [1] key displays the letter a rather than the number 1.
The [CTRL] and [ALT] keys operate much like a desktop keyboard except that they are not chorded – two keys cannot be held down simultaneously. The modifier key must be pressed first followed by the key whose function you want modified.
Activating Modifier Keys
When a modifier key is pressed once, the modifier key icon displays the key in lowercase letters in the taskbar. For example, pressing [CTRL] once displays ctrl key in the taskbar. Once the next key is pressed, the modifier key becomes inactive and disappears from the taskbar.
Locking Modifier Keys
When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key icon displays the key in uppercase letters in the taskbar.
For example, pressing the [FN/BLUE] key twice locks it on – it is displayed as BLUE KEY in the taskbar at the bottom of the screen. The locked modifier key remains active until it is pressed a third time to unlock or turn it off.
8 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
2.2.2
The Keys
The [ALPHA] Key
Used to access the alpha characters displayed in orange print above numeric keys [1] through [9].
The [CAPS] Key
Used to display uppercase alpha characters. Press [ALPHA/
ORANGE] [.] to activate this key.
The Arrow Keys
Contained in the round disk-shaped key at the top of the keyboard.
Moves the cursor around the screen – up, down, left and right.
The [BKSP/DEL] Key
Moves the cursor one character to the left, erasing the incorrectly entered key stroke.
[DEL] key ([FN/BLUE] [BKSP]) erases the character at the cursor position.
The [CTRL] And [ALT] Key
Modify the function of the next key pressed and are application dependent.
The [TAB] Key
Usually moves the cursor to the next field to the right or downward. Pressing [ALPHA/ORANGE] [TAB] move the cursor backward.
The [ESC] Key
Generally used as a keyboard shortcut to close the current menu, dialog box or activity and return to the previous one.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 9
The [SPACE] Key
Inserts a blank space between characters. In a Windows dialog box, the [SPACE] key enables (
√) or disables a checkbox. This key is accessed by pressing [ALPHA/ORANGE] followed by the numeric key [0].
The [SCAN] Keys
Activate the scanner beam while pressed. For units without internal scanners, these keys are inoperable.
The Function Keys – [F1] to [F4]
These keys are not directly accessible from the keyboard – press
[FN/BLUE] followed by the appropriate numeric key to access a function key. These keys are provided to support user applications that require [F] keys.
2.2.3
Adjusting The Keypad Backlight
To adjust the intensity of the keypad backlight and the conditions under which this backlight is activated
• In the Control Panel, choose the Keyboard icon.
Note: Access may be restricted to supervisory use.
10 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
• In the Keyboard Properties dialog box, open the
Backlight tab.
Adjusts light intensity.
Determines the duration of time that the keyboard backlight stays on when unit is not in use.
2.3 The Display
The display backlight can be adjusted to improve visibility in varied light conditions.
2.3.1
Adjusting The Backlight
To adjust the display backlight manually:
• Press the Backlight key [ ] to cycle through from light to darkest, and then back to lightest.
To set the range of the backlight:
• Choose the Display icon in the Control Panel.
• Choose the Backlight tab.
Note: Adjustments may be restricted to supervisory use only.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 11
Adjusts the light intensity of the backlight.
Sets duration of time the backlight stays on at the configured intensity when the unit is not in use.
Sets duration of time the backlight stays on at half the configured intensity when the unit is not in use.
2.3.2
Calibrating The Touchscreen
Note: This function may be restricted to supervisory use.
If the touchscreen has never been calibrated or if the stylus pointer is not accurate when you tap on an item:
• In the Control Panel, choose the Stylus icon, select the
Calibration tab, and then tap on the Recalibrate button.
• Follow the onscreen directions to calibrate the display.
12 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
2.4 Indicators
The WORKABOUT PRO S uses an LED (Light Emitting Diode), onscreen messages and audio tones as indicators.
2.4.1
The LED
A single, two-coloured LED is located on the left side of the unit, just above the [1] key. When you press [ENTER/ON], the LED flashes green to indicate that the unit has been powered up. The LED table below outlines the behaviour of the LED while the unit is docked in a charger.
Keep in mind that the application running on the WORKABOUT
PRO S can dictate how the LED operates. Review the documentation provided with the application to determine LED behaviour.
LED Behaviour
Solid Green
Blinking Green
Solid red
Blinking red
Indication
Charge complete.
Charge in progress.
Temperature outside charge range.
Battery is not charging. Battery fault.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 13
2.4.2
Onscreen Indicators
The taskbar at the bottom of the screen displays a variety of system status indicators.
The taskbar changes dynamically, and only those icons that are applicable are displayed. Double-tapping on an icon displays the associated dialog box.
Windows® Start Button
You can display the Start Menu by tapping on the Windows® Start button in the taskbar.
Modifier Key Indicators
[CTRL], [ALT], [FN/BLUE] and [ALPHA/ORANGE] are modifier keys that have onscreen indicators to show when a key is active or locked. If a modifier key is pressed once to activate it, the key is displayed in the taskbar in lowercase characters.
14 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
If a modifier key is pressed twice, it is ‘locked on’ and the onscreen indicator is displayed in uppercase letters in the taskbar.
Battery Gauge
Battery icons are a visual indication of the remaining battery power.
If the unit is using external AC power, an AC icon is displayed.
Full 75% 50% 25% Empty AC Connection
Battery Charge
The battery charge icon is displayed in the taskbar when the handheld battery is being charged.
LIF and USB Devices
When a device such as a docking station or a charger is connected to the USB (tether) port or the LIF (Low Insertion Force) port and is activated, an associated icon appears in the taskbar.
New device connected: LIF Port New device connected: USB Port
Security Level
Security levels can be set to limit access and prevent inadvertent changes to application settings.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 15
Bluetooth Radio
This icon indicates that a Bluetooth radio is operating in your unit.
2.4.3
Audio Indicators
The audio speaker provides a variety of sounds and can be configured to emit a sound under various conditions. Refer to ‘Volume
Adjustment’ in the ‘WORKABOUT PRO Hand-Held Computer
User Manual’ for details.
Note: The volume can also be adjusted using the Volume & Sound
Properties dialog box in the Control Panel.
Adjusting The Speaker Volume
The volume keys are located to the left and right of the arrow key and are used to adjust the volume emitted from your unit.
The increase volume key is labelled with a plus symbol and the
decrease volume key is labelled with a minus sign
To adjust the speaker volume:
.
• Press the [FN/BLUE] key twice to lock it ‘on’.
• Press the [RIGHT] arrow key to increase the volume or the
[LEFT] arrow key to decrease the volume.
• Press the [FN/BLUE] key again to ‘unlock’ it.
16 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
3. Navigating In Windows CE
On the WORKABOUT PRO S, the ‘point and click’ action associated with a desktop computer mouse is accomplished by tapping a stylus on the touchscreen. In addition, every ‘point and click’ action, an equivalent keyboard shortcut is also available.
3.1 Navigating A Touchscreen
All WORKABOUT PRO S units are equipped with a touchscreen and a stylus.
To prevent damage to the touchscreen, use only the stylus provided –
never use a screw driver or other sharp objects.
To open a file, launch an applet or open a folder:
• Tap the stylus on the appropriate icon.
Note: If the touchscreen is not registering your screen taps accu-
rately,
it may need recalibration. Refer to “Calibrating The Touchscreen” on page 12.
3.2 Navigating Using The Keyboard
You can also use the keyboard to choose icons and navigate dialog boxes, display the desktop, and so on.
Unlike a desktop computer, the WORKABOUT PRO S does not support key chording (pressing two keys at the same time). You must press one key followed by the next in sequence.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 17
Operation Key or Key Combination
Switch between applications [ALT] [TAB]
Open task manager screen [ALT] [ESC]
Move cursor
Open file, folder or icon
Arrow keys
[ENTER]
Exit & Save [ENTER]
Close/Exit & Do Not Save [ESC]
Navigate Dialog Boxes Next field: [TAB]
Move cursor up: [ALHPA/ORANGE][TAB]
Display next ‘tab’: [CTRL] [TAB]
[SPACE] ([ALPHA/ORANGE] [0]) Select Radio Button/
Press Button
Go to Start Menu [FN/BLUE][.]
3.3 The Startup Desktop
When the unit boots up, the startup desktop is displayed. Applications stored in the Startup folder start up immediately. The Startup folder is located in: \Windows\Startup and \Flash Disk\Startup.
18 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
3.3.1
Accessing Desktop Icons
• Double-tap on the icon to open a window or, in the case of an application icon, launch an application.
3.3.2
The Taskbar
A taskbar at the bottom of the screen displays icons through which you can view the security level and battery capacity. A unit equipped with a Bluetooth radio displays the appropriate icon in the taskbar. A hand-held attached to a charger, cradle or docking station displays the associated icon, and so on.
The taskbar also displays active modifier keys – [ALT], [CTRL],
[ALPHA/ORANGE] and [FN/BLUE]. Keys that have been locked
“on” are displayed in uppercase letters.
Using The Taskbar
• Tap on an icon to display the associated dialog box. For example, tapping on the battery icon displays the Power Properties dialog box that indicates the current battery capacity.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 19
3.4 The Start Menu
The Start Menu lists operations you can access and work with. It is available from the startup desktop or from within any application.
To display the menu:
• Tap on the Windows Start button in the taskbar. Tap on the item in the menu with which you want to work.
Note: If your touchscreen is disabled, press [BLUE] [.].
The Desktop
Choosing Desktop from the Start Menu displays the desktop.
Security Settings
To assign a security level:
• Choose Security from the Start Menu.
20 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
• Select a security level from the dialog box, and type the appropriate password.
To change the password:
Note: Keep in mind that this is the same password as that assigned
through the Password control panel applet.
• Choose a security level, and enter the existing password in the Password field.
• Choose the Set Password button.
In the Password Properties dialog box:
• Type the new password in the Password text box, and retype the new password in the Confirm Password text box.
Programs
Programs displays a sub-menu of options with which you can work to access applications.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 21
Shortcuts
This menu provides access to task shortcuts:
The System Tray
Allows keyboard access to the icons in the taskbar at the bottom of the screen. The taskbar displays indicators such as a battery capacity gauge. These indicators are attached to dialog boxes that provide additional information.
• Choose System Tray from the Shortcuts menu.
When System Tray is chosen, the taskbar icons become accessible.
To display the dialog box attached to an icon:
• Use the [LEFT] and [RIGHT] arrow keys to highlight the icon with which you want to work.
• Press [ENTER/ON] to display the associated dialog box.
Cycle Tasks
Used to cycle through active applications (providing the Task Manager is not open). To cycle to the next active task:
• Tap on Cycle Tasks in the Shortcuts menu.
22 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
The Task Manager
Used to switch to another task or to end an active task. To display the task manager window:
• Tap on Task Manager in the Shortcuts menu.
Settings
Tapping on Settings displays a sub-menu of options with which you can access the Control Panel applets, configure your radio
(Network and Dial-up Connections) and customize the Taskbar and
Start Menu.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 23
Help
Tapping on Help provides access to a list of descriptive files that outline the basics of Windows CE .NET.
Run
Choosing the Run option displays a dialog box in which you can enter the name of the program, folder or document you want to open.
24 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
Shutdown
Tapping on Shutdown displays options for a shutdown.
Suspends the unit immediately – equivalent to turning the unit off.
Resets the unit, leaving all saved files and
(registry) settings intact. Unsaved data is lost.
Resets the unit. Files stored outside of permanent memory are lost.
Note: This menu varies depending on the security level. At User
level, the Shutdown sub-menu is replaced with a single
option: Suspend. A sub-menu is not available.
Teklogix security level provides another option: Bootloader. This
option behaves like cold-reset, except that the unit launches Bootloader rather than Windows CE .NET.
3.5 Using A Dialog Box
Tabs
Radio Button
Textbox
Dropdown
Menu
Button
Checkbox
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 25
Note: Tap the stylus on a dialog box element to select or deselect it,
display a dropdown menu and so on. To use the keyboard,
refer to “Navigating Using The Keyboard” on page 17.
Dialog boxes like the samples in this section contain one or more of the following elements:
Tab: Tabs separate different elements of a dialog box. Tap the stylus on the tab with which you want to work.
Textbox: A textbox requires that you type information. Tap on the textbox you want to work with to highlight it, and then type the appropriate information.
Dropdown: This type of menu is identified by up and down arrows next to the dropdown menu to indicate that additional options are available. Tap on the menu to highlight it, and tap on the arrows attached to the menu to cycle through the options.
Checkbox: This box allows you to select or deselect an option. To select (
√) or deselect a checkbox, tap the stylus in the checkbox.
Radio buttons: These buttons allow you to choose from a number
Specify an IP address. Tap on a radio button to activate the option next to it.
Buttons: This type of button allows you to Save, Delete and so on, the options you’ve chosen in a dialog box. Tap on the button you want to execute.
Saving Your Choices: Once you’ve made all your changes, tap on the OK button to save your changes and exit the window.
Note: If an item in a dialog box is displayed in grey text, the item is
not currently available.
26 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
4. General Maintenance
4.1 Caring For The Touchscreen
The touchscreen can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic or crack the internal conductive coating. Protect the touchscreen from the following chemicals:
• mustard, ketchup,
• sodium hydroxide,
• concentrated caustic solutions,
• benzyl alcohol, and
• concentrated acids.
If touchscreens are used in harsh environments, apply disposable screen protectors to dramatically extend the life of the touchscreen.
4.2 Cleaning The WORKABOUT PRO S
Important:
Do not immerse the unit in water. Dampen a soft cloth with mild detergent to wipe the unit clean.
• Use only mild detergent or soapy water to clean the unit.
• Avoid abrasive cleaners, solvents or strong chemicals. The plastic case is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions.
• To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide 27
5. Support Services & Worldwide Offices
Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs.
To locate the service address and phone number nearest to you, refer to the WORKABOUT PRO C, M-E & S Hand-Held Computer Regu-
latory & Warranty Guide, PN 8000084, or visit our website: www.psionteklogix.com
28 Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Reference Guide
Preuzimanje
Javna poveznica ažurirana
Javna poveznica na vaš razgovor je ažurirana. You may view and manage your chat links after registration here.
Javna poveznica dokumenta
Oglas
