Raloy Basic Style KVM switch User Manual

PDF

Document

Publicitate

User Manual

Basic Style KVM Switch

1U KVM Switch with DB-15 Connections

Options :

» KVM Over IP

» 8 or 16 port

Remote Console

Single or Multi-User

Safety Notice

Please read the following before using your Raloy unit:

■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.

■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.

1 Product Overview

1-1 Package Content (Standalone KVM)

Remote

Cat6

Console

Remote

Cat6

Console

KVM unit

■ 1 x KVM Unit

■ 1 x Mounting set w/ bracket & screws

■ 1 x Power cord (for KVM)

Local

USB console

CAT 5 / 6 cable max. 150m

KVM unit

Receiver

KVM with Remote User

■ 1 x KVM Unit

■ 1 x Mounting set w/ bracket & screws

■ 1 x Power cord (for KVM)

■ 1 x Power adapter with power cord (for receiver)

■ 1 x RCE-6 6ft combo KVM cable for receiver

Local

USB console

1-2 Package Content (Integrated KVM)

CAT 5 / 6 cable max. 150m

KVM unit

Receiver

■ 1 x KVM Unit

KVM with Remote User

■ 1 x KVM Unit

■ 1 x Receiver box for remote console

■ 1 x Power adapter with power cord (for receiver)

■ 1 x RCE-6 6ft combo KVM cable for receiver

1-3 Basic Style KVM Table

www.Raloy.com/support/downloads.html

Multi-User Matrix Part Numbers

KVM21016*

KVM31116*

KVM32016*

KVM42116*

KVM41216*

KVM43016*

Concurrent Users Local

Single User Part Numbers Concurrent Users Local

KVM10008*

KVM10016*

KVM10108*

KVM10116*

KVM11008*

KVM11016*

* Replace with either an e for the touchpad or b for the trackball. i.e. RNX119-KVM10108e

Remote

Ports

2 Installation

2-1 Before Installation

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

2-2 Unpacking the Unit

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact Raloy immediately.

2-3 Installation Instructions (Standalone KVM)

Step 1

■ Install each bracket using the screws provided.

Screw A: 2 pcs Screw B: 8 pcs

M3.2 x 4.5 mm M4 x 10 mm

Step 2

■ Mount the KVM into the rack.

2-4 KVM Port & CATx Dongle Connection

CE-6 / CE-10 / CE-15

■

6 / 10 / 15 ft Combo KVM cable

■

Support PS/2 or USB server

RDB-15 Combo KVM port

USB Servers

PS/2 Servers

RCE - 6 / 10 / 15 Combo KVM cable support PS/2 or USB server

RCE-6 / RCE-10 / RCE-15 Combo KVM Cable

■ 6 / 10 / 15 ft. Combo KVM cable

■ Supports PS/2 or USB server

2-5 Cascading the KVM

Raloy KVMs CATx10008 / CATx10016 / CATx10032 can be cascaded.

■ Cascade up to 8 levels (256 servers max)

■ Cascade multiple KVM Switches with RCBC-6 cascade cable.

RCBC-6

■ 6ft Combo KVM cascade cable

Master KVM

Slave KVM level 2

Slave KVM level 3

Cascade

To console VGA port

Slave KVM level 4

Slave KVM level 5

Slave KVM level 6

Slave KVM level 7

Slave KVM level 8

When multiple CATx KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).

2-6 Local and Remote Console Diagram

2-7 Connecting a Remote Console

Receiver

Front

Local

Computer Monitor

Rear

USB

K/B Mouse

Remote I/O

Local

Button to

Remote

Button to

KVM switch

Power

The receiver provides a hotkey function for remote console.

Local computer

( Optional setup )

RCE-6

Combo

KVM cable

Monitor

VGA cable

Remote

Console

Cat6 cable up to 150m

12V DC Power

Adapter

Front

Rear

3 Operation

3-1 KVM Button

Power ON

■ Turn off all servers and KVM switches

■ Make sure all cables / connectors are properly connected

■ Power ON sequence

1. Turn on Rack Monitor (if applicable)

2. Turn on KVM switch

3. Turn on Servers

Front Panel - Port LED Indications

8 ports

16 ports

Bank no.

32 ports

Bank no.

PC port LEDs

Channel button

Bank button

PC port LEDs Channel button

Bank button

7-Segment BANK LED indication

Online : Blue LED on indicating a PC is connecting to the port

Active : Green LED on indicating a selected channel

Press to select channel from 01 to 32

Select the bank from 1 to 8

3-2 Password

The password is enabled by default. The default password is “00000000” (Do not use “0” on number pad)

■ Enable password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U

2. Logout of the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P

3. In SUPERVISOR level, enter “00000000” in both the user name & password fields (Do not use “0” on number pad)

4. In USER level, press Space bar + Enter in user name & password field

5. Note: The system will automatically logout after 10 minutes of inactivity

■ Set your own user name & password

1. Login to the KVM on the SUPERVISOR level by entering “00000000” in user name & password fields

2. Open KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar

3. Press F1 to access the MAIN MENU

4. Select “USER SECURITY”

5. Set password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password b. In the row 1 to 8 (USER), press Enter to set your own user name & password

6. Press Enter to save the new password setting or press Esc to cancel the editing without saving changes a. Note: Blank has underscore, while SPACE doesn’t have one b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character

■ Change your password

1. Login to the KVM in SUPERVISOR level by entering your user name & password

2. Open KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar

3. Press F1 to access the MAIN MENU

4. Select “USER SECURITY”

5. Change password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password b. In the row 1 to 8 (USER), press Enter to change your user name & password

6. Press Enter to save the new password setting or press Esc to cancel the editing without saving changes a. Note: Blank has underscore, while SPACE doesn’t have b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character

■ Disable your password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U

2. Logout of the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P

3. You don’t need user name & password to access the KVM OSD menu

■ Forgot your password

Please contact your supplier for further support

Please Note:

■ You must press the KVM hotkey within 2 seconds

■ A beep sound will be heard upon pressing KVM hotkey

3-3 On-Screen Display (OSD)

OSD Menu

OSD operation

next to the system name

Esc

Enter

PgUp/PgDn

1 / 2 / 3 / 4

The PC is powered on

The PC is selected

Access F1 MAIN MENU

Logout of the OSD menu

Previous menu

Cancel / Quit

Complete / Switch to selected port

Switch to previous or next port

Switch to previous bank or next bank

Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32

Remark: Display port 17 ~ 32 for 32 port model only

F1 Main Menu

01 LANGUAGE

02 PORT NAME EDIT

03 PORT SEARCH

04 USER SECURITY

05 ACCESS LIST

06 HOTKEY

07 TIME SETTINGS

08 OSD MOUSE

OSD language change

Define port name

Quick searching by port name

Change password

Define user access authority

Change hotkey

Modify scan display time interval

Modify OSD mouse speed

3-4 IP Operations

Please refer to the IP Manual for information on how to set-up and use the IP functions on compatible Raloy

KVM Switches. The IP Manual can be found at www.Raloy.com/files/Raloy-KVM-IP-Manual.pdf

3-5 Hotkeys for KVM & Remote Console

Local Console Hotkey

Scroll Lock + Scroll Lock + Space Bar

Function

Calling OSD menu

Right-button mouse + Esc

Scroll Lock + Scroll Lock +

Scroll Lock + Scroll Lock + PgUp / PgDn

Calling OSD menu

Switch to previous port

Switch to next port

Switch to previous bank or next bank

Scroll Lock + Scroll Lock + Bank no. + Port no. Switch to specific port

Scroll Lock + Scroll Lock + B

Turn the buzzer ON and OFF

* Default the buzzer is ON

Scroll Lock + Scroll Lock + P

Logout the KVM if password security is ON.

Show up the status windows

Advance hotkeys (for Supervisor login only)

Scroll Lock + Scroll Lock + S

Scroll Lock + Scroll Lock + R

Scroll Lock + Scroll Lock + U

Scroll Lock + Scroll Lock + L

Activate auto-scan mode for connected servers

*Press any key to exit the auto-scan mode

Reset all the KVM settings to factory default

*Except User Security settings

Disable and enable password security

*Default security is ON

To enable / disable the screen saving function and 10 minutes auto-logout

*Default the screen saving is OFF

Note:

■ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”

■ Bank No. : 1 to 8

■ Port No. : 01 to 32

■ e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4

■ e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6

■ You must press the hotkey within 2 seconds

■ A beep sound will be heard for successful entering

■ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and

Enter keys are supported

Remote Console Hotkey

Scroll Lock + Scroll Lock + C

Scroll Lock + Scroll Lock + Q

Scroll Lock + Scroll Lock + S

Scroll Lock + Scroll Lock + A

Function

Toggle switch between remote & local port

Turn the buzzer ON & OFF

*Default the buzzer is ON

Activate auto-scan mode for remote & local port

*The scan time interval is 5 seconds

Auto-adjust the video signal

4 Product Specifications

4-1 Specifications Table

Product Information

Packaging Information

Dimensions (W x D x H)

Gross Weight

Dimensions (W x D x H)

Gross Weight

443 x 171 x 44 mm (17.4 x 6.7 x 1.73 in.)

5.5 lbs / 2.5 kg

500 x 400 x 90 mm (19.7 x 15.7 x 3.5 in.)

9 lbs / 4.1 kg

Environmental

KVM

Local Console

Operating Temperature

Storage Temperature

Relative Humidity

Shock

Vibration

Number of Ports

Connector

Connectivity

0 to 50 °C (32 to 122 °F)

-5 to 60 °C (23 to 140 °F)

90% non-condensing

50G peak acceleration (11ms, half-sine wave)

58~100Hz / 0.98G (11ms / cycle)

8, 16

DB-15 Combo

Combo 4-in-1 KVM Cable

Up to 6, 10, and 15 feet

1 x DB-15 VGA

Up to 1600 x 1200

2 x USB type A (keyboard & mouse)

Remote Console

IP Remote Console

Compatibility

Power

Regulatory

Graphic Connector

Resolution

Input Device

Connector

Resolution

Input Device

Remote I/O

Compensation

Connector

User Management

Network Protocol

Security

Resolution

Browser

Multi-Platform

Support

Input

Option DC

Consumption

Safety

Environment

1 x DB-15 VGA

Up to 1600 x 1200 (500ft.);

Up to 1024 x 768 (1000ft.)

2 x USB type A (keyboard & mouse)

RJ45 via CAT6/CAT5e/CAT5 cable up to 500 feet

Auto adjusts for cable length

RJ45 Ethernet

15-user login; 1 active user

DHCP / BOOTP / DNS

SSL v3, RSA, AES, HTTP / HTTPs, CSR

Up to 1600 x 1200

IE, Firefox, Safari, Netscape

Mix PCs, SUN and Mac G3 / G4 Mac / iMac

Windows 7 / Vista / 2003 / XP, Linux, Unix

Auto sensing 11 to 240VAC, 50/60 Hz; or AC / DC power adapter [email protected] (optional)

12V / 24V / 48V DC input

Max. 24W; Standby 5W cUL, FCC, CE

RoHS2, REACH

4-2 DC Power: 12V, 24V, 48V Input

Model

Input rating

Input voltage:

Input range:

Input current

- No load

- Full load

Output rating

Output voltage:

Output current:

Efficiency

12V

12-Volt

9 ~ 18V

50 mA

4950 mA

12-Volt

4.16A

84%

24V

24-Volt

18 ~ 36V

50 mA

2450 mA

12-Volt

4.16A

85%

48V

48-Volt

36 ~ 75V

50 mA

1220 mA

12-Volt

4.16A

85%

5 Important Information

Warranty Information

I. Raloy Limited Warranty

Raloy Customer Support warrants to the original retail purchaser that this product is and will be free from defects in materials and workmanship for a period of twenty-four (24) months from date of purchase. During the warranty period, the purchaser must promptly contact Raloy Tech Support for assistance to report a unit failure.

II. Warranty Period

1. The standard warranty period is 24 months commencing from the date of your Raloy invoice.

2. For Touch Screen and High Brightness LCD custom units, the standard warranty period is 15 months commencing from the date of your Raloy invoice.

3. Warranty will be void if any of these cases apply: physical damages by accident, natural disaster, neglect, misuse or improper use of the equipment.

III. Product Return Procedure

Please see the Raloy website at www.raloy.com/support/raloy-product-warranty.html

for detailed product return information.

IV. Raloy Extended Warranty

Raloy also provides the option to extend your warranty service up to 60 Months, please contact our sales at [email protected]

for more warranty service and upgrade details.

Disclaimer of Warranty

EXCEPT AS SPECIFICALLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY LAW,

RALOY DISCLAIMS ALL WARRANTIES AND CONDITIONS WHETHER EXPRESSED, IMPLIED, OR

STATUTORY AS TO ANY MATTER WHATSOEVER INCLUDING, WITHOUT LIMITATION, TITLE, NON-

INFRINGEMENT, CONDITION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR OR INTENDED

PURPOSE. EXCEPT AS EXPRESSLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY

LAW, RALOY SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES

(INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF INFORMATION,

FINANCIAL LOSS, PERSONAL INJURY, LOSS OF PRIVACY OR NEGLIGENCE) WHICH MAY BE CAUSED

BY OR RELATED TO, DIRECTLY OR INDIRECTLY, THE USE OF A PRODUCT OR SERVICE, THE

INABILITY TO USE A PRODUCT OR SERVICE, INADEQUACY OF A PRODUCT OR SERVICE FOR ANY

PURPOSE OR USE THEREOF OR BY ANY DEFECT OR DEFICIENCY THEREIN EVEN IF RALOY OR AN

AUTHORIZED RALOY RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR

LOSSES.

Visit www.Raloy.com

for full warranty information.

What the Warranty Does Not Cover

■ Any product, on which the serial number has been defaced, modified or removed.

■ Damage, deterioration or malfunction resulting from:

■ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

■ Repair or attempted repair by anyone not authorized by us.

■ Any damage of the product due to shipment.

■ Removal or installation of the product.

■ Causes external to the product, such as electric power fluctuation or failure.

■ Use of supplies or parts not meeting our specifications.

■ Normal wear and tear.

■ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Legal Information

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication.

All brand names, logo and registered trademarks are properties of their respective owners.

Salut! Sunt un chatbot AI special antrenat pentru a te ajuta cu Raloy Basic Style KVM switch User Manual. Am analizat cu atenție documentul și te pot ajuta să găsești informațiile exacte de care ai nevoie sau să explic conținutul în termeni clari și simpli. Indiferent dacă ești în căutarea unui ghidaj privind anumite funcții, pași de depanare sau utilizare generală, nu ezita să pui întrebări. Cu cât oferi mai multe detalii despre preocupările sau nevoile tale, cu atât mai precis și eficient te pot ajuta!

Asistentul scrie

Asistentul nu mai este la tastatură. Te rugăm să încerci din nou mai târziu.

Se pare că ai ajuns la un document care este scris în mai multe limbi, inclusiv una care nu este limba ta nativă. Poți folosi linkurile următoare pentru a ascunde temporar paginile fără limba pe care o preferi.