- Vehicles & accessories
- Motor vehicle electronics
- Car video systems
- Blaupunkt
- IVMR-7001
- Operating instructions
Blaupunkt IVMR-7001 Car Video System Operating and Installation Instructions
Add to My manuals15 Pages
Blaupunkt el:Car Video System IVMR-7001 is a video system designed for use in cars. It features a monitor with a built-in light that can be set to turn on when the vehicle's doors are opened or to stay on all the time. The light can be easily changed if it burns out. The monitor can be rotated up to 30 degrees to the left or right for optimal viewing. The system comes with a remote control that allows you to control all of the functions of the monitor, including power, volume, channel selection, and menu navigation.
advertisement
![Blaupunkt IVMR-7001 Car Video System Operating and Installation Instructions | Manualzz Blaupunkt IVMR-7001 Car Video System Operating and Installation Instructions | Manualzz](http://s1.manualzz.com/store/data/002025111_1-61eba815cdc78a397f340204ebb68600-360x466.png)
In Car Video
IVMR-7001
Operating and installation instructions
http://www.blaupunkt.com
DEVICE OVERVIEW
Front view
Control buttons
Monitor release button LCD screen
Light switch
AUX socket
Headphones socket
Infrared receiver
Main light unit
Rear view
Light cable for the main unit
Connecting cable
Screws
15
CONTENTS
Notes for the user .................. 17
Supplied equipment .............. 18
Using for the first time ........... 19
Using the interior light .................... 19
Changing the light bulb ................. 20
Light bulb specifications ................ 20
Wiring ........................................... 20
Monitor connection ........................ 20
Installing the monitor ...................... 21
Operation ............................... 22
Opening the monitor ...................... 22
Repositioning the monitor .............. 22
Closing the monitor ....................... 22
Switching on the monitor ............... 22
Display controls ............................. 23
Remote control .............................. 23
OSD menu .................................... 24
Specifications ........................ 26
Guarantee .............................. 27
Appendix ................................ 27
Changing the battery in the remote control ............................... 27
16
Notes for the user
Please observe all the warning notices, precautionary measures and maintenance tips contained in these operating instructions so as to extend the life of your monitor.
●
To avoid causing a road accident, never use the monitor during the journey.
●
Do not place the monitor’s aerial in the following positions:
1. Positions in which the driver’s view could be restricted.
2. Positions in which the aerial could become a danger to safety (e.g. handbrake, steering wheel, gearshift lever and airbag).
●
●
●
Do not install the aerial in locations where it could restrict the driver’s rear view. Do not allow the aerial to jut out past the side of the vehicle.
Attach the aerial carefully so that you do not loose it whilst driving, particularly in the rain or in the carwash.
To avoid the danger of receiving an electric shock and damaged to the monitor, make sure that the monitor cannot become wet or moist. If, however, this does occur, switch the device off, disconnect the electrical cable, and take the monitor to your local specialised dealer as quickly as possible or send it in to our customer service centre.
NOTES FOR THE USER
●
●
●
●
●
●
●
●
●
●
Only operate the device with the recommended electrical supply of
12V direct current.
Make sure you do not place or hang any objects on the electrical cable since this could damage it.
Avoid laying the cable haphazardly or twisting it. Keep it away from heated objects.
Do not attempt to repair the electrical cable if it becomes damaged or severed – instead, replace it immediately with a new one.
Make sure that no metallic or inflammable objects make their way into the monitor’s insides through the ventilation slots.
Do not attempt to open or dismantle the monitor, since you could suffer an electric shock as a result.
If you detect smoke or a strange smell, disconnect the electrical cable immediately and take it to your local specialised dealer or send it in to our customer service centre.
If the monitor’s housing is damaged or broken, take it to your local specialised dealer or send it in to our customer service centre.
Avoid using the monitor in places where it is subjected to dust, dirt or moisture.
Do not install the monitor in places where it is subjected to direct sunlight or extreme temperatures.
17
NOTES FOR THE USER
●
●
Do not subject the monitor to the wet or moisture.
After installing the monitor, avoid knocking it or pulling it downwards excessively, since this will loosen the screws and the monitor could drop off.
SUPPLIED EQUIPMENT
Supplied equipment
The monitor is supplied with all parts listed below. Please check that your device is supplied with all the parts. If one of the listed parts is missing, please contact your dealer immediately.
Standard package
●
Monitor (including mounting fixture)
●
●
●
●
Remote control with battery
500 cm long, 8-pin system cable
(only for AV signal converter)
Guarantee card
Operating instructions
18
USING FOR THE FIRST TIME
Using for the first time
Using the interior light
There are three settings for the interior light: OFF, DOOR and ON (see diagram below).
OFF: The lights are switched off.
DOOR: With this setting, the lights only come on when the vehicle’s doors are opened.
ON: The lights are switched on.
Notes:
●
There is no electrical cable connected to position “B”, since “B” is connected to the ground via two screws.
●
The power supply must be
12 volts.
OFF DOOR ON
Circuit diagra
W = White = Connection to the sensor
B = Black = Ground
R = Red = Electrical connection
19
USING FOR THE FIRST TIME
Changing the light bulb
To fit a new bulb, proceed as follows:
➮
Set the light switch to “OFF”.
➮
Push back the bulb cover and open it (see diagram below).
➮
Remove the old bulb and dispose of it.
➮
Fit a new bulb.
➮
Close the bulb cover.
Wiring
Bulb for the main unit
Light cable for the main unit
Connecting cable
Screws
Bulb cover
Red = Electrical supply (12 V)
White = Internal lighting system
Black = Ground
Light bulb
Caution:
●
The screws have different sizes.
Make sure that you insert the screws in the correct positions.
●
Make sure that the screws are screwed tight to ensure a good ground connection.
Monitor connection
Light bulb specifications
Diameter: 8 mm
Length:
Voltage:
Type:
29 mm
12 V direct current,
5 W
Stanley A3022C or a type with the same specifications
System cable
Connecting cable
Light cable for the main unit
20
USING FOR THE FIRST TIME
Installing the monitor
Select a suitable position for secure installation of the monitor:
●
The device must not distract the driver or restrict the driver’s view.
●
●
●
●
●
●
The ability to enter and get out of the vehicle must not be impeded.
The device must not be installed in such a way that could prevent the other vehicle components from functioning properly (e.g. sliding sunroof).
Make sure that the device is installed in a safe and secure position and cannot become detached in the event of an emergency stop.
Do not attach the device merely to the roof liner.
If you need to drill additional holes, make sure you do not drill through the vehicle’s sheet metal.
Avoid using the monitor over a longer period of time whilst the engine is off so as to prevent the battery from becoming drained.
21
OPERATION
Operation
Opening the monitor
➮
Press the monitor release button to flip down the LCD display.
➮
To watch the television, lower the monitor until it is at an angle of 90 degrees to the main unit.
Closing the monitor
➮
Rotate the monitor back to its central viewing position (see the following diagram).
Repositioning the monitor
The monitor can be rotated by up to 30 degrees to the right and left from its central viewing position (see the following diagram).
➮
Push the monitor back into its main unit so that the screen clips back into the releasing/locking mechanism.
Switching on the monitor
Press the power-on button on the main unit or on the remote control to switch the monitor on/off.
Note:
Before the monitor is switched on, the power indicator lights up orange. This means that the monitor is connected to the 12 V direct current electrical supply.
Furthermore, “NO SIGNAL” will flash on and off in the on-screen display (OSD) as long as there is no A/V input signal present.
22
Display controls Remote control
AV/TV
MUTE POWER
OPERATION
MENU
AUTO PROG
CHANNEL VOLUME
SRC OSD ON
●
POWER:
This button is used to switch the main unit on/off.
●
OSD:
➮
Press the “OSD” button to open the
OSD menu or select a function in the OSD menu.
●
SRC:
➮
Press this button to select the AV channel (channel 1 – channel 5) of the AV signal converter.
: You can use this button to increase the volume.
You can also navigate upwards in the OSD menu using this button.
: You can use this button to decrease the volume.
Press this button to navigate downwards in the OSD menu.
●
POWER:
To switch the main unit on/off
●
MUTE (Stumm):
Turns down the volume to zero
●
AV/TV:
➮
Press this button to switch between
AV and TV channels.
Note:
This function is only available if the E/A box is connected or the E/A box together with the tuner box.
●
AUTO PROG (Automatic programming):
Select this option on the remote control or in the OSD menu if you want the monitor to automatically search and store the television channels.
The specifications are as follows:
TV system Channels
USA
JAPAN
PALB/G
PALD/K
PALA/I
2-69
1-62
2-69
1-57
21-69
23
OPERATION
Note:
This function is only available if the E/A box is connected together with the tuner box.
●
●
MENU:
You can use this button to open the OSD menu.
CHANNEL:
These buttons allow you to select the selected channels or functions in the
OSD menu.
●
VOLUME:
1. To adjust the volume
2. To adjust settings in the OSD menu
OSD menu
Main menu
➮
Press the “MODE” button on the main unit or “MENU” on the remote control to open the main menu.
Use “EXIT” to close the OSD menu again.
●
VOLUME:
To adjust the volume
●
BRIGHTNESS:
To adjust the brightness
●
CONTRAST:
To adjust the contrast
●
COLOR:
To adjust the colour
●
TINT:
To adjust the tint
●
MISC:
To open the submenu
●
EXIT:
To close the OSD menu
Submenu
➮
In the main menu, select the
“MISC” option to display the following choice of options.
➮
Select “MAIN MENU” to return to the main menu and then “EXIT” to close the OSD menu.
VOLUME
BRIGHTNESS
CONTRAST
COLOR
TINT
MISC
EXIT
+
AUTO PROGRAM
FM CHAN: OFF
AV OUT: LINE
ZOOM: FULL
SPEAKER: OFF
REVOLVE: LEFT RIGHT
REVOLVE: UP DOWN
RESET PICTURE
MAIN MENU
24
●
FM CHAN:
Use this option to select the FM channel. This channel is set by default to
“OFF”.
The specifications are as follows:
TV system FM frequency (MHz) in steps of 0.2 MHz
USA
JAPAN
PALB/G
PALD/K
PALA/I
OFF / 88.1 - 91.9
OFF / 77.1 - 80.9
OFF / 88.1 - 91.9
OFF / 88.1 - 91.9
OFF / 88.1 - 91.9
●
AUTO PROG (Automatic programming):
Please refer to the “AUTO PROG” function in the section describing the remote control.
●
AV OUT:
Select this option to switch between the
AV output modes “Constant” and “Variable”.
●
ZOOM :
This mode is set by default to “Full”. You can use the and buttons to switch between the following settings:
Full = for displaying a 4:3 signal on a
16:9 screen format
ZOOM1 = Picture height expansion, zoom factor = 4/3
WIDTH1 = Picture height expansion and different picture width change
Normal = Side ratio of 4:3
OPERATION
ZOOM2 = Zoom factor = 8/7, picture height expansion
WIDTH = Different picture width change
WIDTH2 = Picture height expansion and different picture width change
ZOOM3 = vertical expansion, zoom factor = 8/7
●
SPEAKER:
Select the “SPEAKER” option and then use the and buttons to switch the monitor loudspeaker on/off.
●
●
REVOLVE:
This function and the and buttons allow you to reverse the picture (i.e.
right-to-left reversed).
RESET PICTURE:
Select the “RESET PICTURE” option to reset the adjusted parameters back to their factory defaults.
●
MAIN MENU:
If you are in the submenu, you can return to the main menu by selecting this option.
25
SPECIFICATIONS
Specifications
Screen size: 7" Monitor, A1
Carrier frequency for IR sensor:
L-CH : 2.3 MHz
R-CH : 2.78 MHz
Screen resolution:
1440 (H) x 234 (V)
Headphones output level:
1.0 Vpp
Active area: 154.08 (H) x
86.58 (V)
Operating voltage (direct current voltage): 11 - 15 V
Pixel pitch (mm): 0.107 (H) x
0.370 (V)
Power consumption:
9 W
Signal system: Dual system NTSC/
PAL
Operating temperature:
0 - 60
°
C
Brightness: 400 cd/m 2
Contrast ratio:
Viewing angle:
Left/right:
Top/bottom:
150
60/60 degrees
60/30 degrees
Storage temperature:
-25 - 80
°
C
Dimensions:
Weight:
320 x 195 x
60 mm
1,200
±
50 g
Response time (rise/fall):
25/30 ms
Video input level: 1.0 Vpp
±
10%
Audio input level: 0.3 Vrms
A/V input level: 1.0 Vpp
±
10%
AUX input level: 1.0 Vpp
±
10%
26
GUARANTEE
Guarantee
The scope of the guarantee depends on the regulations in force within the country in which the unit was purchased.
If your unit develops a fault, please contact your dealer and present the purchase receipt.
If the statutory guarantee period in your country is less than 12 months, Blaupunkt will grant a 12-month manufacturer’s guarantee. This guarantee does not cover damage due to wear, incorrect usage or commercial use.
If you wish to enforce a claim under the manufacturer’s guarantee that is provided by Blaupunkt, please send the faulty equipment together with the purchase receipt to the Blaupunkt customer service centre in your country. You can find out which address is closest to you by contacting the telephone hotline listed on the back page of this booklet. Blaupunkt retains the right to rectify defects or supply a replacement.
APPENDIX
Appendix
Changing the battery in the remote control
➮
Push the battery compartment button to the right (see A below).
➮
Pull the battery compartment out of the remote control (see B below).
➮
Change the battery.
+
A
B
Subject to changes!
27
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Números de serviço / Servicenumre
Country: Phone: Fax: WWW:
Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.com
Austria
Belgium
Denmark
Finland
(A)
(B)
01-610 390
02-525 5454
(DK) 44 898 360
(FIN) 09-435 991
01-610 393 91
02-525 5263
44-898 644
09-435 99236
France (F) 01-4010 7007 01-4010 7320
Great Britain (GB) 01-89583 8880 01-89583 8394
Greece
Ireland
(GR)
(IRL)
0800-550 6550
01-4149400
01-576 9473
01-4598830
Italy (I)
Luxembourg (L)
02-369 6331
40 4078
Netherland (NL) 023-565 6348
Norway (N) 66-817 000
02-369 6464
40 2085
023-565 6331
66-817 157
Portugal
Spain
(P)
(E)
01-2185 00144 01-2185 11111
902-120234 916-467952
Sweden (S) 08-7501500
Switzerland (CH) 01-8471644
08-7501810
01-8471650
Czech. Rep.
(CZ) 02-6130 0441
Hungary (H) 01-333 9575
Poland (PL) 0800-118922
02-6130 0514
01-324 8756
022-8771260
Turkey
USA
(TR) 0212-3350677
(USA) 800-2662528
0212-3460040
708-6817188
Brasil
(Mercosur) (BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474 +604-6413 640
09/01
Blaupunkt GmbH
CM/PSS2 - 8 622 403 141
advertisement
Related manuals
advertisement
Table of contents
- 4 Notes for the user
- 5 Supplied equipment
- 6 Using for the first time
- 6 Using the interior light
- 7 Changing the light bulb
- 7 Light bulb specifications
- 7 Wiring
- 7 Monitor connection
- 8 Installing the monitor
- 9 Operation
- 9 Opening the monitor
- 9 Repositioning the monitor
- 9 Closing the monitor
- 9 Switching on the monitor
- 10 Display controls
- 10 Remote control
- 11 OSD menu
- 13 Specifications
- 14 Guarantee
- 14 Appendix
- 14 remote control