and Comfortable Boating

s Bright backlit displays with wide viewing angles s Auto-Backlighting feature minimizes power consumption s NMEA2000 ® interface offers “Plug and Play” networking s Easy installation with hole-saw flush-mount design s Ideal for mast or bulkhead mounting configurations s White face “F1 Style” gauges provide maximum contrast and visibility s New use Organic Light Emitting Diode (OLED)

Backlighting Technology reduces power consumption

Port

Depth

Current Depth

Shallow alarm threshold

Deep alarm threshold

Anchor shallow alarm threshold

Anchor deep alarm threshold

Speed

STW (Speed through water)

SOG (Speed over ground)

Maximum Speed

Average Speed

VMG to windward

Log (0 – 99999nm)

Trip (0 – 999.99nm)

Wind

Apparent wind speed

Apparent wind direction

True wind speed

True wind direction

Beaufort scale and cardinal point

Maximum wind speed

Maximum true wind speed alarm

Low true wind speed alarm

High apparent wind angle alarm

Low apparent wind angle alarm

Ground Wind

Heading

Heading

Average heading

Locked heading

Heading on next tack

COG (Course over ground)

CMG (Course made good)

DMG (Distance made good)

Navigation

Bearing to Waypoint

Distance to Waypoint

Cross Track Error and error steer bar

Target waypoint name

Target waypoint number

Latitude

Longitude

GPS satellite status

Roll

Pitching

SOG

Environment

Battery voltage

Battery voltage alarm

Date and Time

Water Temperature (two decimal points)

Air Temperature

Pressure

Humidity

Wind Chill Temperature

Dew point

Timer

Count-up timer

Count-down timer

Autopilot

Rudder angle

Engine

Fuel information

Fuel consumption

Engine RPM

WIND

FI-501

NMEA2000 ® ×2

WIND×1

-

™

™

™

™

™

™

™

™

™

™

-

-

-

-

-

-

-

-

-

-

™

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CH WIND

FI-502

NMEA2000 ® ×2

WIND×1

DIGITAL

FI-503

NMEA2000 ® ×2

MULTI

FI-504

NMEA2000 ® ×2

COURSE PILOT

FI-505

NMEA2000 ® ×2

RUDDER

FI-506

NMEA2000 ® ×2

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

™

-

-

™

™

™

™

™

™

™

™

™

™

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

™

-

-

-

-

-

-

-

™

-

-

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

-

™

™

™

™

™

™

™

™

™

™

™

™

™

™

-

-

-

-

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

™

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

™

™

™

-

™

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

™

Instruments

FI-50 Series

0.3 kg 0.7 lb

110 4.3”

2– ø3.5

49 1.9”

26 1.0”

24 0.9”

Wind sensor connector

(FI-501/502 only)

60 2.4”

Wind Transducer

FI-5001

0.3 kg 0.7 lb

80 3.1”

7.5

0.3”

55

2.2”

4–ø5

(30 1.2”) 514 20.2”

369 14.5” 70 2.8”

200 7.9”

220 8.7”

NMEA connector

Cutout for flush mount

ø90 Hole Saw

Depth/Speed/Temp Sensor

DST-800 (Option)

0.9 kg 2.0 lb

ø75 2.94”

ø75 2.94”

5

0.19”

14

0.57”

Junction Box

FI-5002 (Option)

0.3 kg 0.7 lb

2–ø5

ø29

0

ø13

0

52

2.0”

NMEA 2000 ® is a registered trademark of the National Marine Electronics Association.

FURUNO ELECTRIC CO., LTD.

Nishinomiya, Hyogo, Japan

Phone: +81 (0)798 65-2111

Fax: +81 (0)798 65-4200, 66-4622

FURUNO U.S.A., INC.

Camas, Washington, U.S.A.

Phone: +1 360-834-9300

Fax: +1 360-834-9400

FURUNO (UK) LIMITED

Havant, Hampshire, U.K.

Phone: +44 23 9244 1000

Fax: +44 23 9248 4316

FURUNO FRANCE S.A.

Bordeaux-Mérignac, France

Phone: +33 5 56 13 48 00

Fax: +33 5 56 13 48 01

FURUNO ESPAÑA S.A.

Madrid, Spain

Phone: +34 91-725-90-88

Fax: +34 91-725-98-97

FURUNO DANMARK AS

Hvidovre, Denmark

Phone: +45 36 77 45 00

Fax: +45 36 77 45 01

FURUNO NORGE A/S

Ålesund, Norway

Phone: +47 70 102950

Fax: +47 70 102951

FURUNO SVERIGE AB

Västra Frölunda, Sweden

Phone: +46 31-7098940

Fax: +46 31-497093

FURUNO FINLAND OY

Espoo, Finland

Phone: +358 9 4355 670

Fax: +358 9 4355 6710

TRADEMARK REGISTERED MARCA REGISTRADA

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

0709XU Printed in Japan

Catalogue No. M-1542a

FURUNO POLSKA Sp. Z o.o.

Gdynia, Poland

Phone: +48 58 669 02 20

Fax: +48 58 669 02 21

FURUNO DEUTSCHLAND GmbH

Rellingen, Germany

Phone: +49 4101 838 0

Fax: +49 4101 838 111

LLC “FURUNO EURUS”

St. Petersburg, Russian Federation

Phone: +7 812 767 15 92

Fax: +7 812 766 55 52

Precision Instrumentation for Safe

The FURUNO FI-50 Navigation Instrument Series are professionally designed to meet the needs of all sailing and power boat vessels.

These instruments provide a wide variety of precise information, even under the harshest conditions, enhancing your safety at sea.

Each easy-to-use display unit utilizes standard NMEA2000 ® network connectors and cabling. Data from each component may be fully i n t e g r a t e d w i t h a n y N a v n e t 3 D o r o t h e r N M E A 2 0 0 0 ® s y s t e m providing an easy “Plug and Play” installation.

System Configurations

WIND CH WIND DIGITAL MULTI COURSE PILOT RUDDER

Basic Configurations

Wind Transducer

Digital Wind Multi CH Wind

Power Boat

Depth/Speed/Temp

Sensor

Network Radar Sensor

WAAS/GPS

Antenna

Junction Box

Navnet 3D

Multi Function

Display

* 12V power will be supplied from NavNet 3D

Wind Transducer

HUB

DFF1

Transducer

Depth/Speed/Temp

Sensor

Wind Transducer

Wind

12 V

Digital

Depth/Speed/Temp

Sensor

12 V

Sail Boat

Network Radar Sensor

WAAS/GPS

Antenna

Depth/Speed/Temp

Sensor

Digital Wind

Navnet 3D

Multi Function

Display

Wind Transducer

Multi

12 V

Digital Wind Multi

Junction Box

* 12V power will be supplied from NavNet 3D

NMEA 2000 ®

NMEA 0183

Ethernet others

FI-501 FI-502 FI-503

Apparent and True Wind Angle is displayed in both analog and digital format when connected to the FI-5001 or other

NMEA2000 ® wind measurement system.

Data displayed

• Apparent and true wind speed • Apparent and true wind angle • Maximum true wind speed

• MAX/LOW true wind speed alarm • High/Low apparent wind angle alarm • Beaufort wind speed

• VMG to windward

The FI-502 provides detailed and precise wind bearing measurements from 60 port to

60 Starboard, an important range for Close

Hauled (CH) points of sail.

The FI-503 displays critical digital data for navigation, such as depth, speed, temp, and atmospheric weather data in a 3-way split screen.

Data displayed

1 • Current depth • Shallow/deep alarm

• Shallow/deep anchor alarm • Wind angle

• High/Low apparent wind angle

2 • Boat speed • MAX/AVG STW • SOG • MAX/AVG

SOG • VMG to windward • Wind speed • MAX true wind • MAX/LOW true wind speed alarm

• Beaufort wind speed

3 • LOG • Trip • Count up/down timer • Water temperature • Air temperature • Air pressure

• Humidity • Wind chill temperature • Dew point

FI-504 FI-505 FI-506

The FI-504 features a large digital display.

The combination of alpha and numeric characters present all of the data and functionality available in the FI-50 Network.

Alternating Data Displays are possible and selected information can be switched at 3 second intervals.

The FI-505 provides a digital compass readout with an analog “Off-Course” needle that greatly assists the helmsman in maintaining the desired vessel course.

Or, use the needle to check and verify the autopilot steering performance.

Connected to an Autopilot, the FI-506

Rudder Angle Display show precise rudder angle information.

Data displayed

• Rudder angle

Data displayed

• Displays all information on the FI-50 series

• NAVIGATION (Bearing/distance to WPT, XTE, WPT number/name, L/L, Satellites tracked, Roll & Pitch)

• ENVIRONMENT (Battery voltage, Time & Date)

• ENGINE (Trip fuel used, Fuel consumption,

Engine RPM)

Data displayed

• Current heading • Locked heading

• Average heading • Course over ground

Specifications of FI-50 series

Display: Analog and digital LCD (FI-501, 502, 505)

Digital LCD (FI-503, 504)

Power supply: 12 VDC, less than 0.1 A

Temperature: –15°C to +55°C

Waterproofing: IP56

Sensors and Accessories (Option)

Wind Transducer

FI-5001

Angle Accuracy: Better than ±10°

Speed Accuracy: Better than ±5 % (20 kt)

Power supply: 12 VDC, less than 40 mA

Transducer cable: 30/50 m

Depth/Speed/Temp Sensor

DST-800

Junction Box

FI-5002

NMEA2000 ® backbone x 2 ports

NMEA2000 ® x 6 ports

Power supply: 12 VDC, less than 2 A

Easy to install

Surface Mount the displays with a hole saw then install 4 hidden screws under the front bezel. Installations are easy and clean with a finished appearance (1"(26mm)bulkhead protrusion)

Optional “Low Profile” Flush Mounting front panels provide a cosmetic match to NN3D Displays and a custom console appearance (0.4"(10mm)bulkhead protrusion)

Surface mount installation

The units are designed to match the

NavNet 3D series and other navigation equipment. The “Plug and Play” system utilizes NMEA 2000 ® interface protocol, which gives the system exceptional interface ability.

Wind Transducer

Flush mount installation with optional front panel

FI-501 FI-503 MULTI FUNCTION

DISPLAY

JUNCTION

BOX

Easy to Read with Silver Bright LCD Display

The FI-50 Series utilize high-contrast, backlit LCD displays for superior viewing even in direct sunlight. Each unit features an easy-to-read display and 4 simple programming buttons for operation. The function for each key and combination is printed directly on the front panel.

Automatic Backlight Adjustment

The FI-50 series of instruments minimize power consumption by turning off the backlight during the daytime. Sensors on the front panel measure ambient lighting conditions and adjust the on/off condition of the display backlighting accordingly.

FI-503 DIGITAL FI-504 MULTI

Daytime Sunset or after

22 mm

22 mm

41 mm

Back Light

Turns On

Automatic Detection

Back Light

Turns Off

Operational guide description on the front panel