Features: Back and Keyboard
Contents of the box:
Endcap
Scan Bar
LED
Indicator
Back Cover
Features: The Battery Compartment
SIM Card Slot
(if present)
SD Card Slot
ld Com
S Version puter�
Start Gui
de
PN: 80001
36-00
1.A
Speaker
Stylus
Microphone Port
ON
Features: Typical Variants
Features: Front
LED
Indicator
Version without
scanner or
GSM radio
Tether Port
DC Input
Beeper Port
On/Off Switch
Microphone
Port
Stylus
This Guide
Switch the hardware on.
Battery Cover
Additional documentation
(dependent on order)
ISO 9001
Certified
Quality Manage �
ment System
The WORKABOUT PRO
1
Battery Contacts
Hand-He
Quick
June 6,
2007
Note: The SIM Card slot
may be covered on your unit
Getting Started
Insert the battery.
3
Close and lock
the battery cover.
On/Off Switch
Version with GSM
radio and scanner
in endcap
FCC Labels
Version with serial
port in endcap
LIF Port
Version with scanner
in pod
2
Version with pistol grip
Battery Fasteners
Battery Fasteners
Battery Cover
Turn the fasteners towards
the centre of the unit
to lock the battery cover.
Over
4
Charge the battery. The power adaptor may
be plugged directly into the WORKABOUT PRO.
5
Turn the unit on. Press the Enter key
for a few seconds.
Enter Key
To turn the WORKABOUT PRO off, do one
of the following:
•
Press and release the Blue FN key, then press and
release the Enter key.
Select Shut down from the Start menu.
Blue FN Key
•
Orange FN Key
Resetting the unit
Quick Start Guide
July 14, 2009
Important: Resetting may result in data loss.
6
The WORKABOUT PRO may also be charged
in a Docking Station.
Note: Use only the
universal AC power
adaptor appoved by
Psion Teklogix for the
WORKABOUT PRO.
Allow the WORKABOUT PRO to charge
for 6 hours.
5 - 40°C
41 - 104°F
6h
Note: Full battery performance is
only reached after the first few full
charge/discharge cycles.
Connect the WORKABOUT PRO to the
host computer. Connect using a Tether Port to
To cold-reset the WORKABOUT PRO:
•
USB cable, or through a Docking Station.
7
8
Install ActiveSync®.
Go to http://go.microsoft.com/fwlink/?LinkId=147001 and
follow the instructions to download and install
ActiveSync 4.5 or higher.
Note: ActiveSync is not needed when connecting
to a host computer that uses the Windows® Mobile
Device Center (such as Microsoft® Windows Vista®).
Configure ActiveSync. Follow the onscreen
instructions provided by ActiveSync to establish
a connection between the host computer and the
WORKABOUT PRO.
Hand-Held Computer
S Version
Press the Blue FN key, the Orange FN key, and the Enter key
simultaneously for a few seconds. The WORKABOUT PRO
cold-resets.
During a cold reset, running programs are halted and RAM
memory is cleared. The contents of flash memory and the
registry are preserved. The operating system is reloaded.
To warm-reset the WORKABOUT PRO:
•
Press the Blue FN key and the Enter key simultaneously for a
few seconds. The WORKABOUT PRO warm-resets.
During a warm reset, running programs are halted. The
contents of RAM, flash memory and the registry are preserved.
*8000136-001*
8000136-001
Rev. B
ISO 9001 Certified
Quality Management System
PN: 8000136-001.B
">
