Zebra WORKABOUT Installation instructions
Below you will find brief information for Stylus Holder WORKABOUT PRO Stylus Holder. The WORKABOUT PRO Stylus Holder is a device that allows you to securely attach a stylus to your WORKABOUT PRO handheld. This is a great way to keep your stylus handy and prevent it from getting lost. The holder secures to the handheld with screws and features a lanyard loop for added security.
Advertisement
Advertisement
Advertisement
Key features
Securely attaches stylus to WORKABOUT PRO handheld
Features a lanyard loop for added security
Easy to install
Includes all necessary parts
Durable construction
Frequently asked questions
The holder is secured with screws to the inserts shown on the WORKABOUT PRO handheld. You will need to thread the tether through the indicated eyelet and loop it through the loop as shown. Make sure to tighten the screws one-quarter turn beyond finger tight but do not over tighten.
The screws are M2.6 x 5mm Philips Driver, Pan Head with Black Oxide finish.
Related
Psion Ikôn Telescopic Stylus User Manual | AI Chat
Zebra WORKABOUT Owner Manual
Psion Teklogix WORKABOUT PRO 7525S Quick Reference Guide
