Philips DV900VHS VCR Owner`s manual
Add to My manuals84 Pages
Philips DV900VHS is a versatile device that combines the functionality of a DVD player and a VCR, allowing you to enjoy both digital and analog video formats. With its advanced playback capabilities, you can experience high-quality video and audio from your favorite DVDs and VHS tapes. Whether you're watching movies, TV shows, or home videos, the Philips DV900VHS provides a convenient and immersive entertainment experience.
advertisement
Digital Video Disc Player &
Video Cassette Recorder
Owner’s Manual
DV900VHS
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to.
Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a
PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Warranty
Verification
Owner
Confirmation
Model
Registration
Registering your product within
10 days confirms your right to maximum protection under the terms and conditions of your
PHILIPS warranty.
Your completed Warranty
Registration Card serves as verification of ownership in the event of product theft or loss.
S
R
S
I
T
R
A
T I
O N N
E
E
D
E
D
W
Y
DA
Hurry!
10
H
IN
Returning your Warranty
Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model.
Know these
safety
symbols
Congratulations on your purchase, and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.
What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in a PHILIPS product.
Sincerely,
Robert Minkhorst
President and Chief Executive Officer
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
t
This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
s
The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT
FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR
MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
P.S. Remember, to get the most from your PHILIPS product, you must return your Warranty
Registration Card within 10 days. So please mail it to us right now!
For Customer Use
Enter below the Serial No.
which is located on the rear of the cabinet. Retain this information for future reference.
Model No.________________
Serial No. ________________
Visit our World Wide Web Site at http://www.philips.com
Safety and General Information 3
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Communications Commission (FCC) Warning: Any unauthorized changes or modifications to this equipment void the user’s authority to operate it.
Department of Health and Human Services (DHHS) Certification: Complies with 21 Center for
Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM. THE BEAM IS LOCATED INSIDE, NEAR THE DECK MECHANISM.
Special Information for Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio/TV Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection
Unauthorized copying, broadcasting, public performance and lending of Discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.
High Quality
This DVD/VCR is equipped with a High Quality (HQ) system and is compatible with existing Video Home
System (VHS) equipment.
Declaration of Conformity
Model Number:
Trade Name:
DV900VHS
Philips
Responsible Party: Philips Consumer Electronics
P.O. Box 14810
Knoxville, TN 37914
(865) 521-4316
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. (© 1992-1997 Dolby Laboratories, Inc. All rights reserved.)
DTS is a trademark of Digital Theater Systems Inc. in the United States of America.
Copyright 2001 Philips Consumer Electronics. All rights reserved.
4 Table of Contents
General Information
Safety and General Information . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . .4
Introduction . . . . . . . . . . . . . . . . . . . . .5
Playable Discs . . . . . . . . . . . . . . . . . . . .6
Playable Video Cassette Tapes . . . . . . .7
Setting Up Your DVD/VCR
Hookups Without a Cable Box/Direct
Broadcast System . . . . . . . . . . . . . . .8-9
Hookups With a Cable Box/Direct
Broadcast System . . . . . . . . . . . . .10-11
Optional Hookups . . . . . . . . . . . . .12-14
Remote Control Setup . . . . . . . . . . . .15
Turning on Your DVD/VCR . . . . . . . .16
Automatic Channel Setup . . . . . . . .17-19
Setting the Clock . . . . . . . . . . . . . . . . .20
Daylight-Savings Time . . . . . . . . . . . . .21
Language Selection (VCR) . . . . . . . . . .22
On-Screen Status Displays (VCR) . . . .23
Description of Controls
DVD/VCR Display - DVD Features . . .24
DVD/VCR Display - VCR Features . . .25
Front Panel . . . . . . . . . . . . . . . . . . . . .26
Rear Panel . . . . . . . . . . . . . . . . . . . . . .27
Remote Control Buttons . . . . . . . .28-31
Basic VCR Operations
Playing a Video Cassette Tape . . . . . . .32
Recording on a Video Cassette Tape . .33
VCR Recording
Recording One Channel/Watching
Another . . . . . . . . . . . . . . . . . . . . . .34
One-Touch Recording . . . . . . . . . . . . .35
Timer Recording . . . . . . . . . . . . . .36-39
Rerecording (Tape Duplication) . . . . .40
Video Cassette Tape Playback
Repeat Play (Video Cassette Tapes) . .41
Real-Time Counter Memory . . . . . . . .42
Time Search . . . . . . . . . . . . . . . . . . . .43
Special Effects Playback . . . . . . . . . . . .44
Automatic Operation Features . . . . . .45
Additional VCR Features
MTS System . . . . . . . . . . . . . . . . . .46-47
Hi-Fi Stereo Sound System . . . . . . . . .48
Blue Background . . . . . . . . . . . . . . . . .49
Disc Playback and Features
Playing a Disc . . . . . . . . . . . . . . . . . . .50
Disc Menus . . . . . . . . . . . . . . . . . . . . .51
Pausing Playback . . . . . . . . . . . . . . . . .52
Step by Step Playback/Slow Motion . . .53
Fast Forward/Reverse Search . . . . . . .54
Track Playback . . . . . . . . . . . . . . . . . .55
Title/Chapter Playback . . . . . . . . . . . .56
Specific Time Playback . . . . . . . . . . . . .57
Repeat Playback (Discs) . . . . . . . . . . . .58
A-B Repeat Playback . . . . . . . . . . . . . .59
Programmed Playback . . . . . . . . . . . . .60
Random Playback . . . . . . . . . . . . . . . .61
Audio Language/Sound Mode . . . . . . .62
Subtitle Language . . . . . . . . . . . . . . . . .63
Camera Angles . . . . . . . . . . . . . . . . . .64
Status Display (Discs) . . . . . . . . . . . . .65
Parental Lock Levels . . . . . . . . . . . . . .66
Parental Lock Password . . . . . . . . . . .67
DVD Player Setup and Features
Audio Settings . . . . . . . . . . . . . . . .68-69
Language Settings . . . . . . . . . . . . . .70-72
Video Settings . . . . . . . . . . . . . . . . . . .73
Other Menu Settings . . . . . . . . . . . . . .74
Information You May Need
Care and Maintenance / Specifications .75
Helpful Hints . . . . . . . . . . . . . . . . .76-79
Limited Warranty . . . . . . . . . . . . . .80-81
Glossary . . . . . . . . . . . . . . . . . . . . . . .82
Index . . . . . . . . . . . . . . . . . . . . . . . . . .83
Accessories . . . . . . . . . . . . . . . . . . . . .84
Introduction 5
Welcome!
This DVD/VCR combines a Digital Video Disc (DVD) Player and a Hi-Fi Video Cassette Recorder (VCR) into one unit, allowing you to play DVDs, Audio Compact Discs (Audio CDs), and video cassette tapes from one piece of equipment. The DVD Player of this DVD/VCR will allow you to enjoy better picture quality, clearer sound, and endless playback features available on DVDs. Expanding technology allows you to add options to your viewing - watch a director’s cut of a movie, listen to the producer’s comments, or play your favorite scene over and over again. Hear a movie in different languages, or listen only to the soundtrack. The possibilities are limited only by your choices and the materials available on the DVD.
When playing Audio CDs, determine the order in which you want to hear the songs, or play the Disc repeatedly - all while seeing the status of the CD on your television.
We hope you enjoy this DVD/VCR and learn to use all of its features. To get the most out of the DVD/VCR, read this owner’s manual carefully. It will describe how you can access all the features listed below.
Features
VCR
• Automatic Channel Setup
• Automatic Head Cleaner
• Automatic Operation Features
• Automatic Tracking Adjustment
• Blue Background
• Daylight-Savings Time
• Hi-Fi Stereo Sound System
• High Quality (HQ) System
• MTS (Multi-Channel Television Sound) System
• 19 micron head
• On-Screen Displays in English or Spanish
• One-Touch Recording
• Real-Time Counter
• Repeat Play
• S-VHS Quasi Play Back (SQPB)
• Special Effects Playback: Forward and Reverse
Searching; Still; Slow Motion
• Time Search
• Timer Recording
DVD
• Audio Language/Sound Mode Choices*
• Automatic Detection of Disc Type
(Audio CD or DVD)
• DVD Menus in a Desired Language *
• On-Screen Display
• Parental Lock*
• Paused/Fast/Slow/Step-by-Step Playback
• Program Playback (Audio CD only)
• Random Playback (Audio CD only)
• Screen Saver
• Multiple Camera Angles*
• Subtitles in a Desired Language *
* If available on the Disc
When referring to this manual, remember...
VCR
Indicates that the feature described is available on video cassette tapes when the DVD/VCR is in VCR mode.
DVD
Indicates that the feature described is available on some Digital Video Discs when the DVD/VCR is in
DVD mode.
AUDIO CD
Indicates that the feature described is available on some Audio Compact Discs when the
DVD/VCR is in DVD mode.
Disc Menus...
Some explanations in this manual are intended to describe the Disc menus. These menus are set by the movie producers or by the music industry, and the menus will vary among Discs. Furthermore, not all Discs are guaranteed to have menus. However, if the Disc has a menu, you can access the Disc menu by pressing the DVD button, then pressing the MENU button on the remote control. (Make sure the DVD/VCR is in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.)
DVD Menus...
Some instructions explain how to use the DVD player’s menu to set up features of the DVD player or the Disc.
You get to the DVD player menu by pressing the SETUP button on the remote control when playback is stopped. Even if a feature is set up in the DVD player’s menu, it may not be available if the current Disc does not include that feature.
Available Disc Features...
Not all of the features described in this manual may be available on every DVD or Audio CD. If the feature is not available on the Disc, you cannot use the DVD/VCR to make these features available. The “No feature” symbol will appear on the TV screen if you try to set up a feature that is not available on the current Disc or is not available at the current time.
6 Playable Discs
This DVD/VCR will play Digital Video Discs (DVDs) and Audio CDs. In order to play a DVD or Audio CD on this DVD/VCR, make sure the Disc meets the requirements for Region Codes and Color Systems as described on this page. Also, the Discs should be labelled with the following logos and should meet these standards.
Disc Type
Digital
Video
Disc
Audio
CD
Logo Contents Disc Size
Sound and
Pictures
12 cm
8 cm
Maximum
Playback Time
Approx. 4 hours
(single-sided)
Approx. 8 hours
(double-sided)
Approx. 80 minutes
(single-sided)
Approx. 160 minutes
(double-sided)
Sound
12 cm
8 cm
(singles)
74 minutes
20 minutes
Disc
Segments
DVDs are divided into Titles, which are divided into Chapters.
Titles and Chapters are numbered.
Audio CDs are divided into numbered Tracks, i.e., a track may be one song.
Region Codes
DVDs also must be labelled for ALL regions or for Region 1 in order to be played on this DVD/VCR. You can not play Discs that are labelled for other regions.
Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this DVD/VCR.
The number inside the globe refers to a region of the world. Region 1 represents the
United States, Canada, upper regions of North America, Bermuda, the U.S. Virgin
Islands, and small regions near Australia.
A Disc encoded in a specific region format can only be played on DVD players with the same region code. For example, if a Disc is labelled for Region 2, you can not play the DVD on this DVD/VCR.
Color Systems
Different color systems are available throughout the world. The most common color systems are NTSC, which is used primarily in the United States and North America,
PAL, and SECAM.
This DVD/VCR uses the NTSC color system. Therefore, the Discs that you play must be recorded in the NTSC system. You cannot play Discs recorded in other formats.
The color system of the DVD may be listed on the DVD or on the Disc jacket.
Unacceptable Discs
The following Discs cannot be played on this DVD/VCR.
• CD-ROM
• Compact Disc-Interactive (CD-I)
• Compact Disc-Recordable (CD-R)
• Digital Video Disc-Video Recordable
(DVD-VR)
•
•
•
•
•
DVD-RAM
DVD-ROM
Photo CD
Video CD
Video Single Disc (VSD)
The following discs may be played, but only the audio will be available. There will be no picture.
• Compact Disc-Graphic (CD-G) • Compact Disc-Video (CD-V)
Playable Video Cassette Tapes 7
Playable Video Cassette Tapes
This DVD/VCR is equipped with a High Quality (HQ) system and is compatible with existing Video Home System (VHS) equipment.
Philips Consumer Electronics recommends that you use only video cassette tapes which are labeled with the mark. The use of other tapes may result in poor picture quality and excessive deposits on the video heads, which may not be covered by the warranty if damage occurs.The 19 micron head provides a better picture when you view tapes recorded in slow speed (SLP).
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.
1
To prevent recording, break off the tab with a screwdriver.
2
To allow recording, cover the hole with cellophane tape.
●
●
DVD/VCR maintenance
●
Use only tapes with the mark.
Remove any light adhesive stick-on notes from the video cassette tape before putting the tape in the DVD/VCR. Removable labels can jam the DVD/VCR.
Periodic maintenance is required to maintain your DVD/VCR’s excellent performance. This DVD/VCR has an Automatic Head
Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.
1
2
8 Hookups Without a Cable Box/Direct Broadcast System
The basic antenna/cable to DVD/VCR to TV is shown below.
If you have a Cable Box or a Direct Broadcast System, please see pages 10-11. For better sound and picture quality when using the DVD player, refer to the Optional Hookups on pages
12-14. After you hook up the DVD/VCR, go to page 16 to turn on the DVD/VCR.
1
Disconnect the antenna or cable from your TV.
Antenna
Indoor/Outdoor
(300 ohm)
75
ANT /
CABLE
OR
75
Ω
ANT /
CABLE
ANTENNA IN
Jack
(on back of TV)
Cable
(75 ohm)
2
Connect the antenna or cable to the ANT-IN (Antenna In) Jack of your
DVD/VCR.
Back of DVD/VCR
Antenna
Indoor/Outdoor
(300 ohm)
Cr
ANT-IN
OR
ANT-OUT
CH3 CH4
Cable
(75 ohm)
Hookups Without a Cable Box/Direct Broadcast System (cont’d) 9
3
Connect the RF coaxial cable (supplied) to the ANT-IN (Antenna In) Jack on the
back of the DVD/VCR and to the ANTENNA IN Jack on the TV. (You may use
either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
Cr
ANT-IN
Antenna or Cable
75
ANT /
CABLE
75‰
ANT /
CABLE
ANT-OUT
CH3 CH4
RF coaxial cable
ANTENNA IN Jack
(on back of TV) example only
4
Plug in the TV and the DVD/VCR.
5
Set the CH3/CH4 switch on the back of the DVD/VCR to CH3 or CH4,
whichever channel is not used or least used in your area. Set the TV to the same
channel. For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the
TV should be on channel 03.
ANT-IN
Cr
CH 4 or
CH 3
CH3 / CH4
Switch
ANT-OUT
CH3 CH4
CH3 CH4
6
You are ready to turn on the DVD/VCR. Please go to page 16 before turning on the DVD/VCR.
10 Hookups With a Cable Box/Direct Broadcast System
There are two ways to connect your Cable Box/DBS to the DVD/VCR. With this connection:
●
You may view any channel.
●
You must select channels at the Cable Box/DBS. Channels cannot be changed at the DVD/VCR.
●
You may not view a channel other than the one you are recording.
●
You may not program channels at the DVD/VCR.
●
You can only program a timer recording for one channel at a time. Set the TV and the DVD/VCR to the
Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your
Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 37.)
Leave the Cable Box/DBS on for a timer recording.
1
Cable Box/DBS
DVD/VCR
75
ANT /
CABLE
Cable
Signal
IN
OUT
2
ANT-IN
ANT-OUT
L
AUDIO
R
VIDEO
CH3 CH4
IN
DVD/VCR
OUT
DVD/VCR
AUDIO OUT
L
R
RF coaxial cable
RF coaxial cable
3
TV’s
ANTENNA IN
Jack
Connections
1
Connect a Cable signal to the IN Jack on the Cable Box/DBS.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack on the Cable
Box/DBS to the ANT-IN (Antenna In) Jack on the DVD/VCR.
3
Use a second RF coaxial cable to connect the ANT-OUT (Antenna Out) Jack on the DVD/VCR to the TV’s ANTENNA IN Jack.
Recording/Viewing Any Channel
1
With the DVD/VCR on and in VCR position (the VCR light and the VCR/TV light will appear on the display panel), use the CHANNEL o/p buttons to
set the DVD/VCR to the Cable Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch to the same channel.
2
Set the TV to the same channel to which you set the DVD/VCR.
3
Select the channel you want to view/record at the Cable Box/DBS.
Hookups With a Cable Box/Direct Broadcast System (cont’d) 11
With this connection:
●
You may watch one channel while recording another.
●
You may not record scrambled channels.
DVD/VCR
1
ANT-IN
ANT-OUT
L
AUDIO
R
VIDEO
CH3 CH4
IN
DVD/VCR
OUT
DVD/VCR
AUDIO OUT
L
R
2
IN
Cable Box/DBS
Cable
Signal
OUT
RF coaxial cable
75
AN
T /
CABLE
3
TV’s ANTENNA
IN Jack
RF coaxial cable
Connections
1
Connect a Cable signal to the DVD/VCR’s ANT-IN (Antenna In)
Jack.
2
Use an RF coaxial cable (supplied) to connect the ANT-OUT
(Antenna Out) Jack on the DVD/VCR to the IN Jack on the Cable
Box/DBS.
3
Use a second RF coaxial cable to connect the OUT Jack on the
Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the
DVD/VCR’s CH3/CH4 switch. Set the TV to the Cable
Box/DBS output channel (03 or 04).
Then, with the DVD/VCR in VCR position (the VCR light and the
VCR/TV light will appear on the display panel), use the CHAN-
NEL o/p buttons to select the channel you want to
record at the DVD/VCR. Start the recording.
2
Press the VCR/TV button once to put the DVD/VCR in
TV position. (The VCR/TV light will disappear.)
3
Select the channel you want to watch at the Cable
Box/DBS.
Helpful Hint
• When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the DVD/VCR. Set the
TV to the Cable Box/DBS output channel (03 or 04).
12 Optional Hookups
You may connect the DVD/VCR several different ways, depending on your existing equipment and your preferences for sound and picture quality. To determine which hookup is best for you, examine the options on the following pages, then see which best matches your situation. Before you hook up the DVD/VCR, remember:
● Connect the DVD/VCR directly to a TV. If you connect the DVD/VCR to a VCR, then connect the VCR to
● the TV, the picture may be distorted by the copyright protection system.
Turn off the power of all equipment before making any connections.
●
●
●
Refer to the owner’s manuals of your other equipment for additional information.
Depending on your connection, you may need to purchase additional cables.
When you use the DVD/VCR AUDIO and VIDEO OUT jacks on the DVD/VCR, press the DVD/VCR
OUTPUT button to select VCR mode (or DVD mode).
● The S-VIDEO OUT, COAXIAL, OPTICAL, and COMPONENT VIDEO OUT jacks are useful only in DVD mode.
Connecting the DVD/VCR to a Stereo TV
Audio and Video
IN Jacks on TV
1
antenna or cable to
ANT-IN
Jack
3
2
Video Cable
Audio Cables
1
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV, matching the cable col-
ors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the
DVD/VCR’s white DVD/VCR AUDIO OUT jack to the TV’s AUDIO IN jack. You will not use the red audio cable.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and
to the VIDEO IN jack on the TV. Or, for better picture quality, connect an S-Video cable (not supplied) to the
S-VIDEO OUT jack on the DVD/VCR and to the S-VIDEO IN jack on the TV. You will not use the supplied yellow video cable.
4
Connect the TV’s power cord to a power outlet. Turn on the TV and set it to the Audio/Video In
channel, which also may be referred to as A/V In or Auxiliary In. This channel usually is located near channel 00.
See your TV owner’s manual for details. Or, if you used the S-Video cable at step 3, select the S-Video In channel at your TV. See your TV owner’s manual for details.
5
Connect the DVD/VCR’s power cord to a power outlet. Press the POWER button, then press the
DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. “HELLO” will appear briefly on the DVD/VCR’s display panel. You should see the DVD logo on the TV screen briefly. If you do not, check your connections and make sure the TV is set to the correct Audio/Video In channel. If there is no disc in the DVD/VCR, “no DISC” will appear on the display panel.
Optional Hookups (cont’d) 13
●
Connecting to a TV and a Stereo
TV has Component Video In Jacks
Set DOLBY DIGITAL and DTS to OFF on the DVD/VCR. Details are on pages 68-69. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.
1
ANT-IN
ANT-OUT
L
AUDIO
R
VIDEO
CH3 CH4
IN
DVD/VCR
OUT
DVD/VCR
AUDIO OUT
L
R
COMPONENT
VIDEO OUT
S-VIDEO
OUT
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL OPTICAL
Y
Cb
Cr
DVD/VCR
COMPONENT
VIDEO IN
Y
2
Cb/B-Y
Cr/R-Y
3
AUDIO (RIGHT) IN
AUDIO (LEFT) IN
Back of TV
(example only)
Back of Stereo
(example only)
1
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
2
Connect the red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors to the jack colors.
3
Connect an optional component video cable to the COMPONENT VIDEO OUT jacks on the
DVD/VCR and to the COMPONENT VIDEO IN jacks on the TV.
4
Plug in the Stereo’s power cord. Turn on the Stereo and select the Stereo’s Auxiliary IN station.
During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner’s manual for details.
5
Plug in the TV’s power cord. Turn on the TV and set it to the Component Video In channel,
which usually is located near channel 00. During Audio CD playback, you may check the status of Audio
CDs on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details.
6
Connect the DVD/VCR’s power cord to a power outlet. Press the POWER button, then press
the DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. “HELLO” will appear briefly on the DVD/VCR’s display panel. You should see the DVD logo on the TV screen briefly. If you do not, check your connections and make sure the TV is set to the correct Component Video In channel. If there is no disc in the DVD/VCR, “no DISC” will appear on the display panel.
14 Optional Hookups (cont’d)
Connecting to a Dolby Digital Decoder, DTS Decoder, or Amplifier
Some Discs are recorded in a 5.1 channel Dolby Digital Surround or Digital Theater System (DTS) Surround format.
These Discs will sound best if you connect the DVD/VCR to a Dolby Digital or DTS Decoder.
●
You will need a coaxial digital audio cable or an audio optical cable (not supplied). See Helpful Hints below.
●
●
●
If you use the OPTICAL jack, remove the protective cap.
If you connect the DVD/VCR to a Dolby Digital Decoder, set DOLBY DIGITAL to ON. Details are on pages 68-69.
If you connect the DVD/VCR to a DTS Decoder, set DTS to ON. Details are on pages 68-69.
●
●
If the DVD/VCR is not connected to a Dolby Digital or DTS decoder, set DOLBY DIGITAL and DTS to OFF.
Incorrect settings may cause noise distortion and damage the speakers.
Select the 5.1 channel Dolby Digital Surround sound in the Disc menu.
●
●
Connect a subwoofer and the center, front, and surround speakers to the Decoder as described in the Decoder owner’s manual.
If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using a
Mini-Disc or Digital Audio Tape Deck.
1
VIDEO
VIDEO
L/MONO
AUDIO
DVD/VCR
VIDEO IN
Back of TV
(example only)
3
2
COAXIAL DIGITAL
AUDIO IN
1
Connect the antenna or cable to the ANT-IN (Antenna In) jack of your DVD/VCR.
Back of Decoder
(example only)
2
Connect a coaxial digital audio cable (not supplied) to the COAXIAL jack on the DVD/VCR and to
the COAXIAL DIGITAL AUDIO IN jack on the Decoder or Amplifier. (Or, you may connect an audio optical cable (not supplied) to the OPTICAL jack on the DVD/VCR and to the OPTICAL DIGITAL AUDIO IN jack on the Decoder or Amplifier.)
3
Connect the supplied yellow video cable to the yellow DVD/VCR VIDEO OUT jack on the DVD/VCR
and to the VIDEO IN jack on the TV. (Or, you may connect a component video cable or a S-Video cable. Details
are on pages 12-13.)
4
Plug in the power cord of the Decoder or Amplifier. Turn on the
Decoder or Amplifier and select its Auxiliary IN station. During
Disc playback, you will adjust the volume at the Decoder or Amplifier. See its owner’s manual for details.
5
Plug in the TV’s power cord. Turn on the TV and set it to the
correct Video In channel. During Audio CD playback, you may check the Disc status on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details.
6
Connect the DVD/VCR’s power cord to a power outlet. Press the
POWER button, then press the DVD/VCR OUTPUT button so
that the DVD light appears on the DVD/VCR. “HELLO” will appear briefly on the DVD/VCR’s display panel. You should see the DVD logo on the TV screen briefly. If you do not, check your connections and make sure the TV is set to the correct Video In channel. If there is no disc in the
DVD/VCR, “no DISC” will appear on the display panel.
Helpful Hints
• Optical cable may be damaged when bent at acute angles.
Ensure cables are
Minimum 6 in. in diameter
coiled in loops with a diameter of 6 inches or more when storing them.
• Use a cable which is 9.8 feet or shorter.
• Insert cable plugs firmly into the jacks when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a jack.
• Replace the protective cap on the
OPTICAL jack when it is not in use.
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the remote control by pressing the tab, then lifting the lid.
2
Place two AA batteries inside the battery compartment
with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Remote Control Setup 15
1
2
3
Using the Remote Control
●
●
Point the remote control at the DVD/VCR’s remote sensor
(see page 26) when using the remote control to operate the
DVD/VCR.
Do not put objects between the remote control and the
DVD/VCR.
Recycling Guidelines/Battery Safety
● Your new product and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount that needs to be properly dis-
● posed. Your product uses batteries that should not be thrown away when depleted but should be disposed of as small chemical waste. Please find out about the local regulations on disposal of your old product, batteries, and packaging whenever you replace existing equipment.
Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with alkaline; and
Remove batteries when the unit will not be used for a long time.
16 Turning on Your DVD/VCR
Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly.
● You can not program channels if you are using a Cable Box or a
Direct Broadcast System.
1
Press the VCR button, then press the POWER button.
“HELLO” will appear briefly on the front of the DVD/VCR. The VCR light, the VCR/TV light, and the POWER light will appear on the front of the DVD/VCR.
2
Turn on the TV. Set it to the same channel as the CH3/CH4
switch on the back of the DVD/VCR. The display shown below will appear. (If the display does not appear, check your hookups, then follow the steps on page 17 to set up channels and page 22 to select a language.)
SELECT op
→
ENGLISH ON
ESPAÑOL
2
1
Turn on the TV.
POWER
TIMER SET
5
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
MAKE SELECTION OR
PUSH MENU TO CONTINUE
3
Within 60 seconds, press the PLAY button or the STOP button to select English or Spanish on-screen displays and menus.
4
Press the MENU button.
CONNECT ANTENNA OR CABLE
TO VCR
THEN...
PUSH CH UP KEY
OR...
FOR PLAY ONLY - PUSH STOP
5
Within 60 seconds, press the CHANNEL o button to begin
automatic channel programming. AUTO CH PROGRAMMING
IN PROCESS PLEASE WAIT will appear on the TV screen. The
DVD/VCR will memorize all available channels. When all channels are memorized, CHANNELS ARE SET will appear on the screen briefly, then TV programming will appear.
These channels will be available when you want to watch TV while in
VCR mode. To put the DVD/VCR in VCR mode, press the
DVD/VCR OUTPUT button so that the VCR light appears. Then press the VCR/TV button so that the VCR/TV light appears. Press the
VCR button, then use the CHANNEL and Number buttons to select a TV channel for viewing.
3
4
Helpful Hints
• To skip this feature and play a tape immediately, insert a tape with its record tab removed. Or, to skip step
3, press the MENU button. All onscreen displays will be in English. To skip step 5, press the STOP button.
Channels will not be programmed, and CHANNELS NOT SET will appear on the screen.
• If you try to program channels when there is no antenna or cable connected to the DVD/VCR, programming will appear to take place, but eventually a NO TV SIGNALS message will appear. Connect an antenna or cable to the DVD/VCR’s ANT-
IN (Antenna In) jack and press the
CHANNEL o button again. If chan-
nel programming does not resume, you may need to follow the steps on page 17.
• You may need to repeat the steps on this page if a power failure occurs.
Automatic Channel Setup 17
Although your DVD/VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up the channels again.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
2-3
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
TUNER SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
2ND AUDIO
ON
POWER
REW
1
CHANNEL
SKIP
2
PLAY
STOP
3
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
F.FWD
RECORD
PAUSE
1
1
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select
AUTO PROGRAMMING, then press the F.FWD button.
The DVD/VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
START FINISH
4
Wait for a few minutes while the DVD/VCR sets up the
channels. When this is complete, CHANNELS ARE SET will appear on the screen. Then the programming of the lowest channel number placed in the DVD/VCR’s memory will appear on the screen. Now when you press the CHANNEL o/p buttons, you will scan only through channels you receive.
Helpful Hints
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will appear on the screen briefly.
• You can not program channels if you are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have a cable connection, channels 1-125 will be available.
18 Automatic Channel Setup (cont’d)
Adding/Deleting Channels
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
2-5
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
TUNER SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select
ADD/DELETE CH, then press the F.FWD button.
SELECT op ADD/DELETE B
124
125
1
2
3
DELETED
DELETED
→
DELETED
ADDED
ADDED
TO END PUSH EXIT
NOTE: If you have an antenna, channel numbers 2-69 will appear on the ADD/DELETE CH menu. If you have a cable connection, channels
1-125 will be available.
4
Press the PLAY button or the STOP button until the channel number you want to add or delete appears beside the arrow.
SELECT op ADD/DELETE B
16
17
18
19
20
DELETED
ADDED
→
ADDED
ADDED
ADDED
TO END PUSH EXIT
5
Press the F.FWD button to select ADDED or DELETED.
Repeat steps 4 and 5 until you have added or deleted all the channels you wanted to add or delete.
6
Press the DISPLAY/STATUS/EXIT button.
6
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
1
Automatic Channel Setup (cont’d) 19
Reviewing Memorized Channels
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
2-3
PLAY
1
REW
STOP
F.FWD
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
TUNER SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
2ND AUDIO
ON
4
3
RECORD
PAUSE
1
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select CH
MEMORY REVIEW, then press the F.FWD button. A list of memorized channels will appear on the screen.
●
If all the memorized channels don’t fit on the screen, press the
F.FWD button to see the remaining channels. Then press the
●
REW(ind) button to return to the first screen of channels.
If you do not press any buttons within 10 seconds, you will either go to the next screen of channels or you will return to the previous menu.
4
Press the DISPLAY/STATUS/EXIT button once or twice to exit.
1
CHANNEL
SKIP
2
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
20 Setting the Clock
Follow the steps below to set the clock for the VCR. Make sure:
● The DVD/VCR is on and the VCR/TV light appears on the display panel. (If it does not, press the VCR/TV button once.)
●
●
You make each entry within 60 seconds of the previous entry.
Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY button or the STOP button to select SET
CLOCK, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select SET
CLOCK, then press the F.FWD button.
4-5
POWER
TIME
– –
:
– –
DATE
– – / – – / – –
6
2-3
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
1
TO END PUSH EXIT
4
Press two Number buttons for the hour(s) and two
Number buttons for the minute(s). Then press 1 for AM
or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.
TIME 02 :15 PM
MONTH – – / – – / – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
5
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the
year. For example, for July 1, 2000, press 07, 01, 00. The day of the week will appear automatically.
TIME 02 :15 PM
DATE 07 / 01 / 00
SAT.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
6
Press the DISPLAY/STATUS/EXIT button.
Helpful Hints
• Enter a 0 before a single-digit number.
• Entries that do not match the
DVD/VCR’s clock or calendar will cause a question mark to appear on the screen.
• To make corrections, press the CLEAR button until the space for the number you want to correct is flashing. Then enter the correct number.
• To see the current time on the TV screen, press the DISPLAY/STATUS/
EXIT button. Details are on page 23.
• Power failures that last for more than one minute can cause you to lose your clock setting.
Daylight-Savings Time 21
You may program the DVD/VCR so the VCR clock will automatically move forward one hour in April and turn back one hour in
October. Daylight-Savings Time is set to ON when you receive your DVD/VCR. Turn Daylight-Savings Time ON or OFF by following the steps below. Before you begin:
●
●
Make sure the clock is set.
Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
2-3
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
POWER
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
REW
1
CHANNEL
SKIP
2
PLAY
STOP
3
TIMER SET
F.FWD
RECORD
PAUSE
1
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select SET
CLOCK, then press the F.FWD button.
SET CLOCK
→
SET CLOCK
DAYLIGHT SVG TIME [ON]
4
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
SELECT op CHOOSE B
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select
DAYLIGHT SVG TIME. Then, press the F.FWD button so that OFF (or ON) appears beside DAYLIGHT SVG TIME.
SET CLOCK
SET CLOCK
→
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
4
Press the DISPLAY/STATUS/EXIT button.
22 Language Selection (VCR)
Follow the steps below to change the language of the VCR onscreen displays and menus.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
VCR SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
OFF
BLUE BACKGROUND ON
TO END PUSH EXIT
2-4
5
3
Press the PLAY button or the STOP button to select
LANGUAGE, then press the F.FWD button.
SELECT op
→
ENGLISH ON
ESPAÑOL
MAKE SELECTION OR
TO END PUSH EXIT
4
Press the PLAY button or the STOP button to select
English or Spanish (ESPAÑOL)on-screen displays and menus.
5
Press the DISPLAY/STATUS/EXIT button.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Helpful Hint
• If you accidentally select Spanish and need English:
1. Press the VCR button, then press the MENU button.
2. Press the PLAY button or the STOP button to select PREPARE EL VCR, then press the F.FWD button.
3. Press the PLAY button or the STOP button to select LENGUAJE, then press the F.FWD button.
4. Press the PLAY button or the STOP button to select ENGLISH.
5. Press the DISPLAY/STATUS/EXIT button.
1
1
On-Screen Status Displays (VCR) 23
A status display will appear when you press the
DISPLAY/STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
If you select STATUS ON, then select COUNTER ONLY
ON:
●
Whenever you press the STOP button or the PLAY button, the status display will appear for five seconds. After five seconds, only the counter will remain on the screen. You must press the DIS-
PLAY/STATUS/EXIT button to remove it. Portions of the status display also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY
OFF:
●
Whenever you press the STOP button or the PLAY button, the status display will appear for five seconds. Portions of the status display also may appear when you press other function buttons.
If you select STATUS OFF:
●
The status display will not appear when you press function buttons. You must press the DISPLAY/STATUS/EXIT button to see the status display.
1
Press the MENU button.
2
Press the PLAY button or the STOP button to select VCR
SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select ON
SCREEN MODE, then press the F.FWD button.
4
Press the PLAY button or the STOP button to select STA-
TUS, then press the F.FWD button so that OFF (or ON) appears beside STATUS.
Tape
Speed
Receiving and Recording Mode
Current status of tape
STOP
TV STEREO
SLP M 1:23:45
Counter and
Counter
Memory
Time
12:00 AM
CH10
STEREO
2ND AUD
HIFI
Channel
Audio Out Mode
MTS
Broadcast
Available
SELECT op CHOOSE B
→
STATUS
COUNTER ONLY
[ON]
[OFF]
TO END PUSH EXIT
5
If you set STATUS to OFF, go to step 6. If you set STATUS to ON, press the PLAY button or the STOP button to select COUNTER ONLY, then press the F.FWD button so that OFF (or ON) appears beside it.
6
Press the DISPLAY/STATUS/EXIT button.
Helpful Hints
• You may not access a status display when viewing a still picture, during slow motion playback, or during forward or reverse searching.
• The status display may not appear if a weak channel is selected and
BLUE BACKGROUND is set to OFF.
Details are on page 49.
24 DVD/VCR Display - DVD Features
Display
Messages about current DVD operations appear here. See
Display Messages below.
DVD Light (red)
This light appears when the DVD/VCR is in DVD mode. You can only watch DVDs when the DVD light is on. To make the DVD light come on, press the OUTPUT button on the front of the DVD/VCR.
OPEN/CLOSE
STOP
DVD
PLAY
POWER
OUTPUT
VCR
STOP/EJECT REW PLAY
TIMER SET
F.FWD
RECORD
CHANNEL VCR/TV
CST.IN
VIDEO
L
AUDIO
R
Disc loading tray
Insert a Disc here.
POWER Light
This Light appears when the power is on.
Lit when a DVD is inserted. When the
DVD light is on, the disc is loaded completely and is ready for playback.
Lit when an Audio CD is inserted. When the
CD light is on, the disc is loaded completely and is ready for playback.
Display Messages
Displays a title number (DVD)
Displays a chapter (DVD) or track (Audio CD) number
Displays the elapsed time of the current title (DVD) or track (Audio CD)
Power is turning on.
Appears after the disc tray closes if the tray is empty.
Tray is opening or is open.
Tray is closing.
Appears briefly when you press the SKIP buttons to search for the next or previous chapter/track.
Power is turning off.
Disc is loading.
DVD/VCR Display - VCR Features 25
Cassette Compartment
Insert a tape here.
OPEN/CLOSE
STOP
DVD
PLAY
POWER
OUTPUT
VCR
STOP/EJECT REW PLAY
TIMER SET
F.FWD
RECORD
CHANNEL VCR/TV
CST.IN
VIDEO
L
AUDIO
R
POWER
STOP/EJECT REW
VCR
PLAY
TIMER SET
F.FWD
RECORD
CHANNEL
VCR/TV
CST.IN
VIDEO
L
AUDIO
R
VCR Light (Green)
This light appears when the DVD/VCR is in VCR mode.You can only watch tapes when the VCR light is on. To make the VCR light come on, press the OUTPUT button on the front of the DVD/VCR.
TIMER SET Light
RECORD Light
This light appears during a recording. It flashes when a recording is paused.
This light glows when the DVD/VCR is in standby mode or off for a timer recording or during a One-Touch Recording. It flashes if the
TIMER SET button is pressed for a timer recording, but there is no tape in the
DVD/VCR. It flashes when all timer recordings or One-Touch Recordings are finished.
POWER Light
This light appears when the power is on.
CST. IN (Cassette-
Inside) Light
This light appears when a tape is in the DVD/VCR.
VCR/TV Light
This light appears when the
DVD/VCR is in VCR position. This light does not appear when the DVD/VCR is in TV position.
26 Front Panel
POWER Button
Press to turn the power on and off.
TIMER SET Button
Press to put the DVD/VCR into standby mode for a timer recording. Details are on page 38.
CHANNEL Buttons
In VCR mode, press to change channels at the DVD/VCR. Or, press to adjust the tracking of a tape during normal playback or slow motion playback. Also, press to remove vertical jitter in a
Still picture. Details are on page 45.
RECORD Button
Press once to start a recording. Press repeatedly to start a One-Touch Recording.
Details are on page 35.
PLAY Button
Press to play a tape. Press to release Slow, Search, or Still mode and return to tape playback. Details are on page 44. Press to select an item in the VCR menu.
Remote Sensor
Receives a signal from your remote control so you can operate your DVD/VCR from a distance.
SEARCH Buttons
Press for a fast forward or reverse search during Disc playback. Details are on page 54.
POWER
OPEN/CLOSE
STOP
DVD
PLAY
OUTPUT
STOP/EJECT REW
VCR
PLAY
TIMER SET
F.FWD
RECORD
CHANNEL VCR/TV
CST.IN
PLAY Button
Press to start or resume Disc playback.
Details are on page 50.
OPEN/CLOSE Button
Press to open or close the Disc tray.
Details are on page 50.
STOP Button
Press to stop Disc playback.
Details are on page 50.
OUTPUT Button
Press to select DVD mode or VCR mode.
STOP/EJECT Button
Press once to stop the tape.
When playback is stopped, press to eject the tape. Press to select an item in the VCR menu.
REW(ind) Button
When tape playback is stopped, press to rewind the tape at high speed. During playback, press to rewind the tape while the picture stays on the screen. Details
are on page 44. Press to return to a previous VCR menu.
AUDIO In Jacks
Connect audio cables coming from the audio out jacks of a camcorder, another VCR, or an audio source here. Details are on page 40.
VIDEO In Jack
Connect a video cable coming from the video out jack of a camcorder, another VCR, or a video source (laser disc player, video disc player, etc.) here. Details are on page 40.
F.FWD (Fast
Forward) Button
When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on
page 44. Press to advance to the next
VCR menu or to change the setting of an item in the VCR menu.
VIDEO
L
AUDIO
R
Rear Panel 27
ANT-IN (Antenna In) Jack
Connect your antenna or cable here.
Details are on pages 8-14.
AUDIO IN Jacks
Connect audio cables coming from the audio out jacks of a camcorder, another VCR, or an audio source here. Details are on page 40.
COMPONENT VIDEO OUT Jacks
Connect optional component video cables here and to the component
Video In jacks of a television. Details
are on page 13.
DVD/VCR AUDIO OUT Jacks
Connect the supplied audio cables here and to the Audio In jacks of a television or other audio equipment.
Details are on pages 12-14.
COAXIAL Jack
Connect an optional coaxial digital audio cable here and to the Coaxial Digital Audio In jack of a decoder or amplifier.
Details are on page 14.
ANT-IN
ANT-OUT
L
AUDIO
R
IN
DVD/VCR
OUT
DVD/VCR
AUDIO OUT
L
VIDEO
R
CH3 CH4
COMPONENT
VIDEO OUT
Y
S-VIDEO
OUT
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL OPTICAL
Cb
Cr
DVD/VCR
VIDEO OUT Jack
Connect the yellow video cable
(supplied) here and to the TV’s
Video In jack. Details are on
pages 12 and 14.
AC Power
Cord
Connect to a standard AC outlet to supply power to the
DVD/VCR.
VIDEO IN Jack
Connect a cable coming from the video out jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here. Details are on page 40.
CH3/CH4 Switch
Set to channel 3 or 4 to use your TV with your
DVD/VCR. Details are on pages 8-11.
OPTICAL Jack
Connect an optional audio optical cable here and to the Optical
Digital Audio In jack of a decoder or amplifier.
Details are on page 14.
When the OPTICAL jack is not in use, make sure its protective cap is in place.
S-VIDEO OUT Jack
Connect an optional S-Video cable here and to the S-Video In jack of a television. Details are on pages 12 and 14.
ANT-OUT (Antenna Out) Jack
Use the supplied RF coaxial cable to connect this jack to the ANTENNA IN Jack on your TV, Cable Box, or
Direct Broadcast System. Details are on pages 8-11.
Helpful Hints
• You only need one audio connection and one video connection, so you will not have a cable connected to every jack. For example, if you are using the S-VIDEO OUT jack, you will not use the yellow VIDEO OUT jack or the
COMPONENT VIDEO OUT jacks.
• The S-VIDEO OUT jack, COAXIAL jack, OPTICAL jack,and COMPONENT VIDEO OUT jacks are only useful in
DVD mode.
• When you use the DVD/VCR AUDIO and VIDEO OUT jacks, press the DVD/VCR OUTPUT button on the remote control to select VCR mode or DVD mode.
28 Remote Control Buttons
DVD/VCR OUTPUT Button
Press to select DVD mode or VCR mode. The DVD light will appear on the front of the DVD/VCR when it is in DVD mode. The VCR light will appear on the front of the DVD/VCR when it is in VCR mode. For video tape playback, also make sure the VCR/TV light is on.
Details are on page 32.
POWER Button
Press to turn the power on and off. “HELLO” appears briefly on the display panel as the DVD/VCR turns on. “BYE” appears briefly as the
DVD/VCR turns off. Details are on page24.
DVD Button
Press before using the remote control for DVD features.
REW(ind) Button
DVD mode
●
Press to view the picture in fast reverse motion (DVD) or to reverse playback of an Audio CD. Details are on page 54.
VCR mode
●
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stays on the screen. Details are on page 44. Press to return to a previous menu.
STOP Button
In DVD mode, press to stop Disc playback. In VCR mode, press to stop tape playback or recording, or press to select an item in the VCR menu.
SEARCH MODE/TIME SEARCH Button
DVD mode
●
Press to access or remove the SEARCH menu, which allows you to go directly to a specific Title/Chapter/Track/Time. Details are on pages 55-57.
VCR mode
●
Press to fast forward or rewind the tape a specific length of time.
Details are on page 43.
SETUP Button
When Disc playback is stopped, press to access or remove the DVD player’s SETUP menu. Details are on pages 66-74.
RETURN Button
Press to return to the previous DVD SETUP menu or to remove the
SETUP menu from the TV screen.
TITLE Button
Press to display the Title menu of the Disc, if available. Details are on
page 51.
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Helpful Hints
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control before pressing other DVD buttons. DVD operation buttons are labelled in blue or white. Make sure the DVD/VCR is in DVD mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the
DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before pressing other VCR buttons. VCR operation buttons are labelled in orange or white. Make sure the DVD/VCR is in
VCR mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
Remote Control Buttons (cont’d) 29
MEMORY Button
Press to memorize a tape position at which the real-time counter was set to 0:00:00. Details are on page 42.
TIMER SET Button
Press to put the DVD/VCR in standby mode so a timer recording can occur. Details are on pages 36-38.
VCR/TV Button
Use to select the signal that your TV receives.
VCR Position (VCR or DVD mode)
●
When the green VCR light appears on the front of the DVD/VCR, use the VCR to watch a tape, to watch a TV program while recording it, or to watch a TV broadcast using the CHANNEL o/p or Number buttons to change channels at the DVD/VCR.
When the red DVD light appears on the front of the DVD/VCR, use the
DVD Player to view Disc playback or menus.
If the VCR/TV light appears on the front of the DVD/VCR, it is in VCR position (in either VCR or DVD mode).
TV Position
●
Use to watch TV (changing channels at the TV) or to watch one program while recording another. Details are on page 34. If the VCR/TV light doesn’t appear on the front of the DVD/VCR, it is in TV position.
A-B REPEAT Button
Press to set up A-B Repeat Play, which repeatedly plays a specific segment of a Disc. Details are on page 59.
MENU Button
DVD mode
●
Press to display the menu of the Disc. Details are on pages five and 51.
VCR mode
●
Press to access the VCR menu.
ENTER Button
Press to select a setting in the DVD Player menu or to select a feature in the Disc menu.
SUBTITLE Button
During disc playback, press to access the subtitle menu of the
Disc, then press the o/p buttons to select a language for the subtitles (among those available) or to turn off the subtitles. Details
are on page 63.
REPEAT Button
Press to repeat playback of the current Disc or Track (Audio CD) or a Title or Chapter (DVD). Details are on page 58.
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
30 Remote Control Buttons (cont’d)
SLOW Button
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 44.
PAUSE Button
DVD mode
●
Press to pause Disc playback. Details are on page 52. Press repeatedly to advance the DVD picture step by step (or one frame at a time).
Details are on page 53.
VCR mode
●
While recording, press to temporarily stop the recording (pause).
Press a second time to resume normal recording. Details are on page
33. You can not pause a One-Touch Recording. Or, press during tape playback to freeze the picture. Press again to resume playback.
Details are on page 44.
SKIP/CHANNEL Buttons
DVD mode
●
Press to skip Chapters or Tracks. Details are on page 55.
VCR mode
●
Press to change channels at the DVD/VCR.
Number Buttons
DVD mode
●
Press to directly select a Track (Audio CD) or a Chapter or Title
(DVD) for playback. Details are on pages 55-56.
Press to program Tracks (Audio CD) for playback. Details are on page 60.
VCR mode
●
Use to set up VCR features (such as the clock). Press to select TV channels at the DVD/VCR. Cable Users: Enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6.
If you only press the Number 6 button, channel 6 will be selected after a brief delay. (There also may be a brief delay when you select channels 10,
11, and 12.) If you want to select channels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press number buttons 1, 1, 7. Antenna Users: Enter channel numbers as a twodigit number for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay. You may only select channels 2-69.
DISPLAY/STATUS/EXIT Button
DVD mode
●
Press to display information about the disc.
Details are on page 65.
VCR mode
●
Press to access or remove the VCR’s on-screen status display. Details
are on page 23. Press to exit on-screen VCR menus.
MODE Button
Press to set up programmed or random playback for an Audio CD.
Details are on pages 60-61.
CLEAR Button
DVD mode
●
Press to remove Track numbers from a Program. Details are on page 60.
VCR mode
●
Press to erase incorrect data when programming VCR functions.
Also, press to reset the real-time counter. Details are on page 42.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
REW
PLAY
STOP
F.FWD
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Helpful Hints
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control before pressing other DVD buttons. DVD operation buttons are labelled in blue or white. Make sure the DVD/VCR is in
DVD mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before pressing other VCR buttons. VCR operation buttons are labelled in orange or white. Make sure the DVD/VCR is in VCR mode by pressing the DVD/VCR OUTPUT button so that the DVD light appears on the front of the DVD/VCR.
Remote Control Buttons (cont’d) 31
VCR Button
Press before using the remote control for VCR features.
PLAY Button
Press to begin Disc or tape playback. Press to select an item in the VCR menu.
F.FWD (Fast Forward) Button
DVD mode
●
Press to fast forward the Disc. Details are on page 54.
Press the PAUSE button, then press the F.FWD button to begin slow motion playback. Press the F.FWD button repeatedly to change the forward speed of slow motion. Details are on page 53.
VCR mode
●
When playback is stopped, press to fast forward the tape at high speed. During playback, press to fast forward the tape while the picture stays on the screen. Details are on page 44. Press to advance to the next VCR menu or to change the setting of an item in the VCR menu.
RECORD Button
Press once to start a recording. Details are on page 33. Or, press repeatedly to start a One-Touch Recording. Details are on page 35.
SPEED Button
Press to select the recording speed (SP or SLP). Details are on
pages 38 and 82.
ARROW Buttons
Press to select an item in the DVD player menu or in the Disc menu.
AUDIO Button
Press the AUDIO button, then press the o / p buttons to choose one of the audio languages or sound modes available on the Disc.
Details are on page 62.
ANGLE Button
Press to view the picture from a different angle (if available). Press the
ANGLE button, then press the o / p buttons to choose one of the available angles. Details are on page 64.
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
32 Playing a Video Cassette Tape
VCR
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the DVD/VCR is set to. Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
2
Insert a tape in the cassette compartment of the
DVD/VCR. The POWER,VCR, VCR/TV and CST. IN lights will appear on the front of the DVD/VCR. If the tape’s record tab has been removed, playback will start automatically.
3
If playback does not start automatically, press the VCR button, then press the PLAY button.
4
Press the STOP button to stop playback.
5
Press the REW(ind) button to rewind the tape.
6
After the tape stops, press the STOP/EJECT button on the DVD/VCR to remove the tape.
5
S-VHS Quasi Play Back (SQPB)
This unit allows you to view a tape recorded in S-VHS format. A tape recorded in S-VHS format will play the same as a tape recorded in normal format. This unit detects whether the tape is recorded in S-VHS format or in normal format.
1
2
Turn on the TV.
Insert a tape in the
DVD/VCR.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Helpful Hints
• If the tape you want to play is already in the DVD/VCR, make sure the DVD/VCR power is on and the
DVD/VCR is in VCR mode and VCR position. (The VCR light and the
VCR/TV light will appear on the front of the DVD/VCR.) Then press the
PLAY button.
• Other tape playback options and features are on pages 41-48.
• When you play a tape recorded in
S-VHS format on this unit, you can not get the high resolution that would be available on an S-VHS
VCR. Noise lines (black and white streaks) may appear on the picture.
• If REPEAT PLAY is set to ON, playback will begin automatically, even when the record tab is intact.
3
4
VCR
Recording on a Video Cassette Tape 33
Read and follow the steps below to record a television program onto a video cassette tape. Before you begin, make sure the
DVD/VCR is in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the
DVD/VCR.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the DVD/VCR is set to. Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
2
Insert a tape with its record tab intact into the cassette
compartment of the DVD/VCR. If tape playback begins, press the STOP button.
3
If the VCR/TV light appears on the front of the DVD/VCR, go to step 4. If the VCR/TV light does not appear, press the VCR
button, then press the VCR/TV button once.
4
Press the SPEED button until the desired tape speed
appears briefly on the screen. (Details about tape speed are on
page 38.)
5
Use the CHANNEL o/p buttons or the Number buttons
to select the TV channel to be recorded.
6
Press the RECORD button once to start recording. The
RECORD light will appear.
7
To pause the recording, press the PAUSE button once.
The RECORD light will flash. To resume recording, press the
RECORD button or press the PAUSE button again. The
RECORD light will come on again.
8
To stop recording, press the STOP button.
3
5
4
1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
POWER
1
CHANNEL
SKIP
2
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
REW
PLAY
STOP
3
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Helpful Hints
• If you press the RECORD button when there is not a tape in the
DVD/VCR, NO CASSETTE will flash on the screen.
• If you press the RECORD button while a tape without a record tab is in the DVD/VCR, the DVD/VCR will eject the tape and PROTECTED
CASSETTE CANNOT RECORD will flash on the screen.
• Other recording options are on pages 34-40.
• You can change the tape speed during a recording, but some distortion will appear on the tape.
• The DVD/VCR will record in a preset volume.
8
6
7
34 Recording One Channel/Watching Another
VCR
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the RECORD button to
start a recording of the current TV channel. Details are on
page 33.
2
Press the VCR/TV button to put the DVD/VCR in TV
position. The VCR/TV light will disappear from the front of the
DVD/VCR.
3
Use the TV remote control to select the channel you want to watch at the TV.
4
To return to the channel being recorded, use the TV
remote control to select channel 03 or 04 at the TV (the channel to which the CH3/CH4 switch on the back of the
DVD/VCR is set). Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the TV. Details are on page 12.
5
Press the VCR/TV button on the DVD/VCR remote con-
trol to put the DVD/VCR in VCR position. The VCR/TV light will appear on the front of the DVD/VCR. The channel being recorded will appear on the TV screen.
6
Press the STOP button to stop the recording.
6
2&5
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
3
Select the channel you want to watch at the TV.
4
Select channel 03 or 04 at the
TV.
Helpful Hint
• If you use a Cable Box or Direct
Broadcast System hookup, you may not be able to watch one channel while recording another.
See pages 10-11 for details.
One-Touch Recording 35
VCR
The One-Touch Recording (OTR) feature allows you to set an immediate timed recording 30 minutes to eight hours long. Before you begin:
●
Set up the TV channels at the DVD/VCR. Details are on page 17.
●
●
Select a recording speed (SP, SLP) with the SPEED button.
Put a tape in the cassette compartment of the DVD/VCR. Make
● sure the tape’s record tab is intact and the tape is long enough to record the program(s).
If the end of a tape is reached during an OTR, the DVD/VCR will eject the tape. The DVD/VCR will switch to DVD mode immediately, and the TIMER SET light will blink. To let the OTR continue, insert another tape in the DVD/VCR.
To return to VCR mode, press the TIMER SET button on the front of the DVD/VCR, then press the DVD/VCR OUTPUT but-
● ton so that the green VCR light appears on the front of the
DVD/VCR.
Place the DVD/VCR in VCR mode. Press the DVD/VCR OUT-
PUT button so that the green VCR light appears on the front of
● the DVD/VCR.
Place the DVD/VCR in VCR position. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the CHANNEL o/p but-
tons or the Number buttons to select the channel you want to record.
2
Press the RECORD button repeatedly until the desired recording length (30 minutes to eight hours) appears on the
screen. Recording will begin immediately. The RECORD light and the TIMER SET light will appear on the front of the DVD/VCR.
OTR (0:30)
CH12
3
1
3
To stop an OTR before recording is finished, press the
STOP button.
To cancel the OTR but continue recording, press the RECORD button repeatedly until REC appears in the upper left corner of the TV screen. (STATUS must be set to ON. See page 23 for details.) The
RECORD light will remain on the front of the DVD/VCR, but the
TIMER SET light will disappear.
When the OTR finishes, if no timer recordings are set, the
TIMER SET light will blink. The DVD/VCR power will turn off automatically. When the power is turned on again, the DVD/VCR will be in DVD mode. To return to VCR mode, press the TIMER SET button, then press the DVD/VCR OUTPUT button so that the VCR light appears on the front of the DVD/VCR. (The TIMER SET light will disappear.)
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
2
Helpful Hints
• To check the time remaining for an
OTR after the OTR has been set, press the DISPLAY/STATUS/EXIT button.
• To change the recording length while an OTR is in progress, press the
RECORD button until the desired length appears on the screen.
• If you begin an OTR when another recording is paused, the OTR will begin.
• You can not pause an OTR.
• If the preset time for a timer recording comes up during an OTR, the
OTR has priority. A message will remind you when the timer recording was scheduled to begin. You may let the OTR continue; the timer recording will not take place. Or, stop the OTR and press the TIMER SET button immediately. The timer recording will take place if you press the TIMER
SET button before the timer recording’s scheduled start time.
36 Timer Recording
VCR
Follow the steps below to program your DVD/VCR to record TV programs while you’re away from home. The DVD/VCR will turn itself on, record, and turn itself off automatically. Before you begin:
●
Set up the TV channels at the DVD/VCR.Details are on page 17.
●
Set the clock. If the clock is not set, CLOCK MUST BE SET will appear on the TV screen briefly, followed by the VCR menu.
●
Follow the directions on page 20 to set the VCR’s clock.
Put a tape in the cassette compartment of the DVD/VCR. Make
● sure the tape’s record tab is intact and the tape is long enough to record the program(s).
Press the DVD/VCR OUTPUT button so that the VCR light appears on the front of the DVD/VCR.
●
Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
Do each step within 60 seconds of the previous step.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
2-3
POWER
VCR/TV
DVD
REW
1
CHANNEL
SKIP
2
DVD/VCR
OUTPUT
PLAY
STOP
3
TIMER SET
MEMORY
VCR
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
PROGRAM, then press the F.FWD button.
SELECT op CHOOSE B
→
ONCE
DAILY
WEEKLY
PROGRAM REVIEW
SETUP
MODE AUDIO SUB TITLE ANGLE
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select a
ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD button.
●
ONCE: The DVD/VCR will record a TV program on any day you choose, up to 12 months away.
●
DAILY: The DVD/VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time.
●
WEEKLY: The DVD/VCR will record the same channel on the same day, at the same time, and for the same length of time every week.
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
Daily
Recording
(example)
SELECT PROGRAM NUMBER
TO END PUSH EXIT
1
1
Helpful Hint
• If you need to make a correction while programming a timer recording, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information.
4
Use the Number buttons (1-8) to select a slot in which to
store the timer recording. There are eight slots. Numbers for open slots will flash on the screen.
NOTE: If you enter a number for a slot that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen briefly. Information about the program in that slot will appear on the screen.
If this happens, press the DISPLAY/STATUS/EXIT button, then select another number.
●
●
●
●
5
Use the Number buttons to enter the TV channel you want to record.
Cable Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 6, press 0,6. If you only press the Number 6 button, channel 6 will be selected after a brief delay.
There also may be a brief delay when you select channels
10, 11, and 12. If you want to select channels 100 and above, enter channel numbers as a three-digit number. For example, to select channel 117, press 1, 1, 7.
Antenna Users, enter channel numbers as a two-digit number for the quickest results. For example, to select channel 5, press 0,5. If you only press the Number 5 button, channel 5 will be selected after a brief delay. You may only select channels 2-69.
If you are recording from line input, press 0,0 to select AV REAR.
If you are using a Cable Box/DBS, select the Cable Box/DBS output channel (03 or 04). Set the Cable Box/DBS to the channel you want to record. Leave the Cable Box/DBS on for the timer recording. Details are on page 10.
6
Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute you want the recording to begin. Press 1 for AM or
2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL
TIME ON
10
– – : – –
Timer Recording (cont’d) 37
4-7
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
REW
1
CHANNEL
SKIP
2
PLAY
STOP
3
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
7
Follow the instructions in step 6 to enter the recording’s
stop time. (AM or PM will be set automatically.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL
TIME ON
TIME OFF
10
09:30 PM
– – : – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Instructions continue on page 38.
Helpful Hints
• Entries that do not match the
DVD/VCR’s clock or calendar will cause a question mark to appear on the screen.
• If you are recording from line input, connect the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the DVD/VCR.
(Please see illustration on page 40.)
38 Timer Recording (cont’d)
8
Press the Number 1 button to record in SP speed or the
Number 2 button to record in SLP speed. (See the chart below.) You cannot use the SPEED button at this time.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL
TIME ON
TIME OFF
REC SPEED
SP=1 SLP=2
10
09:30 PM
11:00 PM
SLP
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
POWER
VCR/TV
DVD
REW
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
11
TIMER SET
F.FWD
STOP
9
Press two Number buttons for the month and two
Number buttons for the day you want to record the pro-
gram. For example, for July 10, 2000, press 07, 10. The day of the week and the year will appear automatically (you cannot program the DVD/VCR to record more than one year in advance).
ONE TIME PROGRAM
PROGRAM 1
CHANNEL
TIME ON
TIME OFF
REC SPEED
START DATE
10
09:30 PM
11:00 PM
SLP
07/10/00
MON.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
8
9
10
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
10
Press the DISPLAY/STATUS/EXIT button. PROGRAM
WAS COMPLETED/PLEASE PUSH TIMER-SET FOR TIMER
RECORDING will appear on the screen briefly. (If PROGRAM
NOT COMPLETED appears, try again from step 1.)
11
Press the TIMER SET button. The TIMER SET light will appear on the front of the DVD/VCR. The DVD/VCR will be in standby mode. If you turn on the DVD/VCR power, the DVD/VCR is in
DVD mode. You can use the DVD features.
If the timer recording will take place several hours or days from now, you may use the DVD/VCR until time for the recording. Press the TIMER SET button to place the DVD/VCR in standby mode a few minutes before the recording starts.
If you forget to place the DVD/VCR in standby mode, PLEASE PUSH
TIMER-SET FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. Press the CLEAR button to remove the message. Then press the TIMER SET button.
Tape Speeds
This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP,
LP, and SLP. When recording, you can change the tape speed (SP or SLP) using the SPEED button. You cannot record in LP speed.
Press the TIMER
SET button to place the
DVD/VCR in standby mode.
Insert a tape in the DVD/VCR.
Leave the Cable
Box/DBS on
(if applicable).
Tape Speed
SP
LP
(standard play)
(long play)
(playback only)
Cassette type/Playback Time
T160 T120 T60
2 hrs.
40 mins.
5 hrs.
20 mins.
2 hrs.
4 hrs.
1 hr.
2 hrs.
SLP
(super long play)
8 hrs.
6 hrs.
3 hrs.
Timer Recording (cont’d) 39
Checking or Cancelling Timer Recordings
●
Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the VCR light appears on the front of the DVD/VCR.
1
With the DVD/VCR on and in VCR mode and in VCR position
(press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR), press the VCR button, then
press the MENU button.
2
Press the PLAY button or the STOP button to select
PROGRAM, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select
PROGRAM REVIEW, then press the F.FWD button. The timer recording information for the program in the lowest numbered slot will appear on the screen. If no timer recordings are set, nothing will happen when you press the F.FWD button.
4
Press the F.FWD button repeatedly to review all pro-
grammed timer recordings. If you don’t press the F.FWD button within 10 seconds, the DVD/VCR will automatically display information about the next programmed timer recording. This will continue until all timer recordings have been displayed. Then the menu will disappear.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.
6
Repeat steps 1-4 to make sure you have cleared the correct timer recording.
2-4
POWER
5
VCR/TV
DVD
REW
1
CHANNEL
SKIP
2
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
STOP
3
TIMER SET
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
1
1
Helpful Hints
• CLASH may flash on the screen when you finish setting a timer recording.
This means that the timer recording you just programmed and another timer recording overlap. The current timer recording will not take place.
You may choose to cancel the overlapping timer recording.
• To stop a started timer recording, press the STOP/EJECT button or the
TIMER SET button on the front of the
DVD/VCR.
• If the power fails for more than one minute, programmed timer recordings will be lost. If this occurs, repeat the steps on pages 16 and 20 before resetting the timer recordings.
• If the preset time for a timer recording comes up during an OTR, the
OTR has priority. A message will remind you when the timer recording was scheduled to begin. You may let the OTR continue; the timer recording will not take place. Or, stop the OTR and press the TIMER SET button immediately. The timer recording will take place if you press the TIMER
SET button before the timer recording’s scheduled start time.
See page 78 for more hints.
40 Rerecording (Tape Duplication)
VCR
The instructions on this page show you how to copy tapes. The illustration uses two DVD/VCRs. Different
VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-7.
1. Audio cables from DVD/VCR AUDIO OUT Jacks of
DVD/VCR 1 to AUDIO IN Jacks of DVD/ VCR 2
DVD/VCR 1
Playing unit
DVD/VCR 2
Recording unit
2. Video cable from DVD/VCR VIDEO
OUT Jack of DVD/VCR 1 to VIDEO
IN Jack of DVD/VCR 2
1
Make the connections shown above.
3. RF coaxial cable from the ANT-OUT
(Antenna Out) jack of DVD/VCR 2 to the TV’s ANTENNA IN Jack
2
DVD/VCR 1 will play your tape. Put a prerecorded tape into
the cassette compartment of DVD/VCR 1.
3
DVD/VCR 2 will record your tape. Insert a blank tape in the
cassette compartment of DVD/VCR 2. The DVD/VCR must be in VCR mode and VCR position. (The VCR light and the VCR mode and VCR/TV light will appear on the front of the DVD/VCR.)
Helpful Hints
4
Turn on the TV and set it to channel 03 or 04, whichever channel the CH3/CH4 switch on DVD/VCR 2 is set to.
5
Point the remote control at DVD/VCR 2. Press the VCR button, then press the Number buttons 0, 0, 1 or 0, 0, 2.
(See Helpful Hints at right.)
6
Press the SPEED button to select SP or SLP at DVD/VCR 2.
7
Press the VCR PLAY button on DVD/VCR 1 and the
RECORD button on DVD/VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on DVD/VCR 1, then press the STOP/EJECT button on DVD/VCR 2.
• If you use the AUDIO and VIDEO
IN Jacks on the back of DVD/VCR
2, press Number buttons 0, 0, 1 at step 5. AV REAR will appear on the
TV screen.
• If you use the AUDIO and VIDEO In
Jacks on the front of DVD/VCR 2, press Number buttons 0, 0, 2 at step 5. AV FRONT will appear on the TV screen.
• Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.
• If a program has copyright protection, it may not record clearly.
• These instructions show you how to copy tapes using two DVD/VCRs like yours. Different VCRs may operate differently.
• You cannot record DVD material onto a video cassette tape using a single unit.
Repeat Play (Video Cassette Tapes) 41
VCR
●
Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR.
1
POWER TIMER SET
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
VCR SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
OFF
BLUE BACKGROUND ON
TO END PUSH EXIT
2-4
5
1
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
3
Press the PLAY button or the STOP button to select
REPEAT PLAY.
4
Press the F.FWD button so that ON appears beside
REPEAT PLAY.
SELECT op CHOOSE B
→
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
ON
BLUE BACKGROUND ON
TO END PUSH EXIT
5
Press the DISPLAY/STATUS/EXIT button. Now, when a tape has finished playing, the DVD/VCR will rewind it and start playback again.
Helpful Hints
• To cancel Repeat Play, follow steps
1-3 above. At step 4, press the
F.FWD button so that OFF appears beside REPEAT PLAY. Press the DIS-
PLAY/STATUS/EXIT button.
• The real-time counter memory does not function during Repeat Play.
42 Real-Time Counter Memory
VCR
Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.
●
Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR.
1
Press the VCR button, then play, fast forward, or rewind a tape to the location that you would like to refer to later. Press the STOP button to stop the tape.
2
Press the DISPLAY/STATUS/EXIT button to see the status display.
STOP
TV STEREO
1:08PM
CH10
1
2
SLP 1 : 23 : 45 HIFI
3
While the status display is on the screen, press the
CLEAR button to reset the real-time counter to zero.
STOP
TV STEREO
1:08 PM
CH10
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
4
5
3
SLP 0 : 00 : 00 HIFI
4
While the real-time counter is on the screen, press the
MEMORY button so that M appears beside the counter.
STOP
TV STEREO
1:08 PM
CH10
SLP M 0 : 00 : 00 HIFI
5
To go to a tape location where the real-time counter was reset to zero, press the REW(ind) button or the F.FWD
button when playback is stopped.
When the tape reaches the point at which the counter was set to zero, the tape will stop.
Press the PLAY button to watch the tape.
Helpful Hints
• The MEMORY button does not function if REPEAT PLAY is set to
ON. Details are on page 41.
• To erase a real-time counter memory, press the MEMORY button until the M disappears from the screen.
• You may only set the real-time counter to zero at one location at a time. If you set the real-time counter to zero at a second location, the previous real-time counter to zero setting will be erased.
Time Search 43
VCR
Follow the steps below to program the DVD/VCR to search forward or backward on a tape a specific length of time. There must be a tape in the DVD/VCR.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the SEARCH
MODE/TIME SEARCH button.
TIME SEARCH
0:00
3
2
ENTER SEARCH TIME
2
Within 10 seconds, use the Number buttons to enter the desired length of time you want to skip forward or back-
ward. For example, for 1 hour, 25 minutes, press Number buttons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.
3
Within 10 seconds, press the F.FWD button or the
REW(ind) button. The DVD/VCR will skip over the specified length of time, then begin playback.
1
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
Helpful Hints
• If you want to search for more than
59 minutes, you must enter the length of time in hours and minutes.
For example, to search forward 70 minutes, press 1,1,0 at step 2.
• You can not do a Time Search while recording.
• To remove the Time Search display, press the SEARCH MODE/TIME
SEARCH button again.
• To cancel a Time Search that is in progress, press the STOP button.
• If the end of the tape is reached during a Time Search, the Time
Search will be cancelled. The
DVD/VCR may rewind the tape.
Details are on page 45.
44 Special Effects Playback
VCR
Before trying the features on this page, make sure the DVD/VCR is in VCR mode.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
Forward and Reverse Searching (SP/LP/SLP)
1
During tape playback, press and release the F.FWD but-
ton or the REW(ind) button. A fast forward or reverse picture search will begin.
2
To return to playback, press the PLAY button.
Super High Speed Searching (LP/SLP)
1
During tape playback, press the F.FWD button or the
REW(ind) button, then press again. The DVD/VCR will now search in super high speed.
2
To return to normal playback, press the PLAY button.
Viewing a Still Picture
1
During tape playback, press the PAUSE button. A still picture will appear on the screen.
2
To release the still picture and return to playback, press the PLAY button or press the PAUSE button again.
Viewing a Slow Motion Picture
1
During tape playback, press the SLOW button. The tape will play in slow motion.
2
To release Slow mode and return to normal playback, press the PLAY button or press the SLOW button again.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP
MODE AUDIO SUB TITLE ANGLE
Helpful Hints
• Slow and Still modes will automatically switch to Stop mode after five minutes to protect the DVD/VCR and the tape from damage.
• SP/LP/SLP means this feature will work with tapes recorded in
Standard Play, Long Play, or Super
Long Play.
• LP/SLP means this feature will work with tapes recorded in Long
Play or Super Long Play. For details about tape speed, see pages 38 and 82.
Automatic Operation Features 45
VCR
The following tape playback features are available in VCR mode.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin.
If a timer recording is set, and the TIMER SET light is flashing, the power will not come on automatically when you insert a tape with the record tab intact.
If a timer recording is set and the TIMER SET light is flashing, the
DVD/VCR will eject the tape if the record tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded, or recorded to its end, the
DVD/VCR will rewind the tape, stop, then eject the tape.
If the real-time counter memory is set, the DVD/VCR will only rewind the tape to the point at which the counter is set to zero, then stop. The DVD/VCR will not eject the tape automatically. If
REPEAT PLAY is set to ON, the DVD/VCR will not eject the tape automatically.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off (but the
DVD/VCR must be plugged in).
If a timer recording is set, and the TIMER SET light is on or flashing, the tape cannot be ejected. To eject the tape, you must first press the TIMER SET button to cancel the timer recording, then press the
STOP/EJECT button to remove the tape.To reset the timer recording, insert a tape, then press the TIMER SET button to put the
DVD/VCR in standby mode for the timer recording.
Automatic Tracking Adjustment
The DVD/VCR adjusts tracking automatically to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).
Manual Tracking
To manually adjust the tracking during normal playback and slow motion playback, press the CHANNEL o/p buttons on the
DVD/VCR. (The CHANNEL o/p buttons on the remote control will not adjust tracking.)
Tracking will return to Automatic Tracking Adjustment when you press the STOP button or insert a tape.
You cannot manually adjust the tracking of a Still picture. However, you may press the CHANNEL o/p buttons on the front of the
DVD/VCR to remove vertical jitter in a Still picture.
Before
Tracking
Adjustment
After
Tracking
Adjustment
46 MTS (Multi-Channel Television Sound) System
VCR
Your DVD/VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your DVD/VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes recorded in monaural (single-source) sound as well.
Your DVD/VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with your DVD/VCR’s stereo and second audio setups. Then follow the directions on page 47 to record in stereo or second audio and the directions on page 48 to play back tapes recorded in Hi-Fi stereo.
Understanding On-Screen Displays
When you receive a signal from a channel you’re watching, portions of the on-screen display shown below will appear when you press the DISPLAY/STATUS/EXIT button on the remote control.
The indication 2ND AUD or TV
STEREO that appears on this side of the status display tells you if your
DVD/VCR is programmed to receive a second audio or stereo broadcast (it cannot be programmed to receive both at the same time).
Specifically…
STOP
TV STEREO
SLP 1:23:45
12:00 AM
CH 02
STEREO
2ND AUD
HIFI
The indication 2ND AUD or STEREO that appears on this side of the status display tells you if the program you’re watching is available in second audio or stereo.
This indication is not available during tape playback.
STOP
TV STEREO
SLP 1:23:45
12:00 AM
CH 02
STEREO
2ND AUD
HIFI
When a program broadcast in stereo is available, STEREO appears here.
When a program broadcast in second audio is available, 2ND AUD appears here.
When a program is available both in stereo and second audio, both
STEREO and 2ND AUD appear here. Even though a program is available in stereo or second audio, you still must program the DVD/VCR to receive or record the program. Follow the directions on page 47.
NOTE: Although a program may be broadcast in both stereo and second audio, you cannot record in both stereo and second audio at the same time.
To record and play back programs broadcast in stereo, even if you have a single-speaker TV, just use one of the connections shown, then follow the steps on pages 47-48.
Monitor
TV
Stereo
Speaker TV
Single
Speaker TV
Stereo Amplifier or Receiver
OR
OR
Monaural Sound
RF coaxial cable (supplied) from DVD/VCR’s
ANT-OUT (Antenna Out) jack to TV’s
ANTENNA IN Jack
Video cable from DVD/VCR VIDEO OUT Jack of
DVD/VCR to VIDEO IN Jack of monitor TV
R L
Audio cables from
DVD/VCR AUDIO OUT
Jacks of DVD/VCR to
AUDIO IN Jacks of Stereo
Amplifier or Receiver
MTS (Multi-Channel Television Sound) System (cont’d) 47
VCR
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select
TUNER SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
2ND AUDIO
ON
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select TV
STEREO or 2ND AUDIO. Then, press the F.FWD
button. ON will appear to the right of your selection.
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
→
2ND AUDIO ON
TO END PUSH EXIT
4
Press the DISPLAY/STATUS/EXIT button.
5
To record, select the channel to be recorded using the
CHANNEL o/p buttons, then go to step 6.
6
Press the RECORD button to start recording.
1
5
4
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
2-3
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
6
1
Helpful Hints
• You can only receive and record in stereo or second audio programs that are broadcast in stereo or second audio. You can only play in stereo or second audio tapes that were recorded in stereo or second audio. Please see page 46 to determine if the program you want to watch/record is being broadcast in stereo or second audio.
• If you select second audio when second audio is not available, the
DVD/VCR will record normal audio.
48 Hi-Fi Stereo Sound System
VCR
Multi-Channel Television Sound system broadcasts are automatically recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the tapes recorded in Hi-Fi stereo, however, you’ll need to follow steps 1-5.
● Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY button or the STOP button to select VCR
SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
OFF
BLUE BACKGROUND ON
TO END PUSH EXIT
3
Press the PLAY button or the STOP button to select
AUDIO OUT, then press the F.FWD button.
SELECT op
→
HIFI
MONO
ON
1
5
TO END PUSH EXIT
4
Press the PLAY button or the STOP button to select
HIFI. ON will appear to the right of HIFI on the screen.
SELECT op
→
HIFI
MONO
TO END PUSH EXIT
ON
5
Press the DISPLAY/STATUS/EXIT button.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
2-4
1
Helpful Hints
• Normally, HIFI should be selected from the AUDIO OUT menu for playback with Hi-Fi sound. But, you can change the selection to MONO if you want monaural audio playback. To do this, follow steps 1-3. At step 4, press the PLAY button or the
STOP button to select MONO. Press the DISPLAY/STATUS/EXIT button.
HIFI will disappear from the status display.
• All programs are automatically recorded in both Hi-Fi stereo sound and in monaural sound.
• The audio level of a tape recorded in Hi-Fi stereo will differ from the audio level of a tape not recorded in
Hi-Fi stereo.
• If you play non-Hi-Fi tapes while the
DVD/VCR is set to HIFI, HIFI will disappear from the status display and the tape will play in monaural sound.
Please see additional notes on page 79.
Blue Background 49
VCR
If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted.
Or, if you want to receive the weak signal, set BLUE BACK-
GROUND to OFF. When you select a channel that is receiving a weak signal, you will see and hear the static in the TV programming. The channel number will not appear on the screen when you select a weak channel.
To set BLUE BACKGROUND to ON or OFF, follow these steps.
●
Before you begin, place the DVD/VCR in VCR mode. Press the
DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
→
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2-3
4
REW
POWER
PLAY
STOP
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT MEMORY
VCR
1
CHANNEL
SKIP
2 3
RECORD
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
2
Press the PLAY button or the STOP button to select
VCR SET UP, then press the F.FWD button.
SELECT op CHOOSE B
→
REPEAT PLAY
ON SCREEN MODE
AUDIO OUT
LANGUAGE
OFF
BLUE BACKGROUND ON
TO END PUSH EXIT
F.FWD
PAUSE
3
Press the PLAY button or the STOP button to select
BLUE BACKGROUND. Then, press the F.FWD button repeatedly so that OFF (or ON) appears beside BLUE
BACKGROUND.
SELECT op CHOOSE B
REPEAT PLAY
ON SCREEN MODE
OFF
AUDIO OUT
LANGUAGE
→
BLUE BACKGROUND ON
TO END PUSH EXIT
4
Press the DISPLAY/STATUS/EXIT button.
1
1
50 Playing a Disc
DVD AUDIO CD
Playing a DVD or an Audio CD
Before you begin...
Turn on the power of the TV, amplifier and any other equipment connected to the DVD/VCR. Make sure the TV and the stereo or amplifier (if applicable) are set to the correct channel. Details are
on pages 8-14.
1
Press the POWER button to turn on the DVD/VCR. “HELLO” will appear briefly on the display panel.
2
Press the DVD/VCR OUTPUT button so that the red
DVD light appears on the front of the DVD/VCR. Then, press the DVD button.
3
Press the OPEN/CLOSE button on the front of the
DVD/VCR to open the Disc tray.
4
Place a Disc into the tray. Make sure the Disc is sitting properly in the correct recess.
Some DVDs are recorded on both sides. Make sure the side you want to play is facing up. Or, if the DVD is recorded on only one side, place the Disc in the tray with the label facing up.
5
Press the PLAY button. The tray will close automatically, and playback will begin at the first Chapter or Track of the Disc.
Or, you may press the OPEN/CLOSE button to close the tray, and DVD playback will start automatically. (You also may close the tray by gently pressing the Disc tray toward the DVD/VCR.)
If the DVD in the tray has a menu, the menu may appear on the screen instead. Details are on page 51.
With some Audio CDs, playback will not begin unless you press the PLAY button.
6
Press the STOP button to stop playback. If disc playback is stopped for more than one minute, a screen saver will appear.
Details are on page 77.
Remember, this DVD/VCR will play only certain Discs.
See page six for details.
3
Press the OPEN/CLOSE button on the DVD/VCR.
4
Insert a Disc.
1
5
POWER
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
REW
1
CHANNEL
SKIP
2
PLAY
STOP
3
TIMER SET
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
REPEAT
Helpful Hints
2
6
• A “No Feature” symbol may appear at the bottom right of the
TV screen. This symbol means either the feature you tried is not available on the Disc, or the DVD/VCR can not access the feature at this time.
This does not indicate a problem with the DVD/VCR.
• If a Disc is dirty or has scratches, the pictures may appear distorted and playback may stop. In such cases, remove the Disc and turn off the DVD/VCR. Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the DVD/VCR again and reinsert the Disc for playback.
• When the DVD or CD light appears on the display panel, the Disc is loaded completely and is ready for playback.
• When you press the OPEN/CLOSE button or the DVD PLAY button on the front of the DVD/VCR when the power is off, the DVD/VCR will turn on automatically and will be in DVD mode.
Disc Menus 51
DVD
Using the DVD Menus
Some DVDs contain menus that describe the contents of the Disc or allow you to customize Disc playback. For example, the menu may offer choices for subtitle languages, director’s commentary, or soundtrack playback.
To use the DVD menu and select playback features, follow these steps.
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the MENU button. The
DVD’s main menu will appear.
2
Press the arrow buttons ( o / p / s / B ) to select an item,
then press the ENTER button. Continue this process to set up all the features you wish to see on the Disc.
1
To access the DVD’s Main Menu...
DVD VCR
PLAY
REW F.FWD
STOP
2
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
Using the Title Menu
Some DVDs have a Title Menu, which lists the Titles available on the Disc. Use the Title Menu to start playback at a specific Title.
Some DVDs may allow you to choose Chapters from the Title menu.
For example, if a DVD has 10 Titles and you want to go directly to Title 5, follow these steps.
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the TITLE button. The
Title Menu will appear.
If a Title menu is not available, the
TV screen.
symbol may appear on the
NOTE: If the DVD only has a main menu, the main menu may appear when you press the TITLE button.
2
Press the arrow buttons ( o / p / s / B ) to select the
desired Title, then press the ENTER button.
Playback will begin at the Title you selected.
1
To access the DVD’s Title Menu...
DVD VCR
PLAY
REW F.FWD
STOP
2
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1
Helpful Hints
• Menus may vary among Discs.
Refer to the information accompanying the Disc for details.
• Not all DVDs have Title menus.
• Some DVDs may refer to Chapters as “scenes.” Some DVDs may refer to the Title Menu as the “scene index.”
52 Pausing Playback
DVD AUDIO CD
Pausing Playback
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
During disc playback, press the DVD button, then press the
PAUSE button on the remote control. Playback will pause and the sound will be muted.
PAUSE
2
Press the PLAY button to resume playback.
PLAY
1
Pausing Playback...
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2
RECORD
PAUSE
3
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
REPEAT
2
1
DVD
Memory On:
Resuming playback from the point where playback stopped
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the STOP button during
disc playback. Playback will stop, and STOP will appear at the top right corner of the TV screen. In a few seconds, MEMO ON
(Memory On) will appear in the top left corner of the TV screen.
STOP MEMO ON
2
Press the PLAY button. Playback will resume from the point where playback stopped last.
PLAY
Memory On...
POWER
TIMER SET
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD
PLAY
VCR
2
REW
STOP
F.FWD
1
Helpful Hints
• Memory On can be erased by pressing the STOP button a second time while playback is stopped.
MEMO OFF will appear briefly at the top left corner of the TV screen.
• Memory On is not available with
Audio CDs.
• The DVD/VCR will switch to VCR mode automatically if disc playback is paused or stopped for 30 minutes. This helps avoid the possible burning of a still image into the TV picture tube. Details are on page
77.
• To see the on-screen display messages, such as PLAY, STOP, or
PAUSE, set OSD MESSAGE to ON.
Details are on page 74.
Step by Step Playback 53
DVD
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the PAUSE button to
pause playback. The sound will be muted.
PAUSE
2
Press the PAUSE button repeatedly to see the picture advance one frame (or step) at a time.
The sound will remain muted. PAUSE will appear briefly on the screen each time you press the PAUSE button. (OSD MESSAGE must be set to ON. Details are on page 74.)
3
Press the PLAY button to resume playback.
PLAY will appear briefly on the screen. (OSD MESSAGE must be set to ON. Details are on page 74.)
PLAY
POWER
TIMER SET
1
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
REW
PLAY
F.FWD
3
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
1,2
DVD
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the PAUSE button during playback.
2
Press the F.FWD button. Slow motion playback will begin.
Press the F.FWD button repeatedly during slow motion playback to vary the speed of slow motion playback. You may play the DVD at 1/16, 1/8, or 1/2 the normal playback speed.
3
Press the PLAY button to return to normal playback.
Slow Motion
1
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
REW
1
CHANNEL
SKIP
2
4 5
PLAY
STOP
3
6
F.FWD
RECORD
PAUSE
SLOW
Helpful Hints
• The sound will be muted when playback is paused and during slow motion playback.
• You can not play the DVD in reverse slow motion.
3
2
1
54 Fast Forward/Reverse Search
DVD AUDIO CD
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
During playback, press the DVD button, then press the
F.FWD button or the REW button on the remote control.
●
●
On a DVD, pressing the F.FWD or REW button repeatedly will forward or reverse the picture at twice, eight times, or 32 times the normal playback speed. Sound will be muted during searching.
Use the F.FWD button for a forward search. Press the REW button for a reverse search.
Press the REW button.
E
X2
Press the F.FWD button.
D
X2
Press the REW button again.
E
X8
Press the REW button again.
E
X32
Press theF.FWD button again.
D
X8
Press the F.FWD button again.
D
X32
2
1
Press the REW button again.
Press the F.FWD button again.
●
●
On an Audio CD, you may search forward or backward at 16 times the normal playback speed (hX16 or gX16). Pressing the F.FWD or REW button repeatedly will not affect the speed of the search. Sound will be intermittent during searching on an
Audio CD.
Use the F.FWD button for a forward search. Press the REW button for a reverse search.
Press the REW button during Audio CD playback.
E
X16
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2
RECORD
PAUSE
3
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Press the F.FWD button during Audio CD playback.
D
X16
2
Press the PLAY button to return to normal playback.
Helpful Hint
• To see the search speed on the screen, OSD MESSAGE must be set to ON. Details are on page 74.
Track Playback 55
AUDIO CD
Starting Playback at a Specific Track
There are three ways to begin playback on an Audio CD at a specific
Track. You may use the Number buttons, the SEARCH MODE button, or the SKIP H G buttons. For details, read the information below.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
A
Using the Number Buttons to Select a Track
Press the DVD button, then press the Number buttons to
enter the desired Track number. The selected Track will be located, and playback will start. You may select a Track with the
Number buttons during playback or when playback is stopped.
For single-digit Tracks, press a single Number button. For example, to play Track three, press the Number 3 button.
For Tracks numbered 10 and above, press the +10 button (repeatedly, if necessary), then press the Number button of the second digit. For example, to play Track 12, press the +10 button, then press the Number 2 button. For Track 22, press the +10 button twice, then press the Number 2 button.
If you enter a Track number that is not available on the Disc, playback will not begin (or the current Track will continue to play).
B
Using the SEARCH MODE Button to Select a Track
Press the DVD button, then press the SEARCH MODE but-
ton once, then press the o p
buttons to select the Track number you desire. Finally, press the PLAY button to begin playback at the selected Track.
If you press the SEARCH MODE button once during playback, the current Track number will be displayed inside the brackets.
B
A-C
1
4
POWER
VCR/TV
DVD
REW
SKIP
2
5
DVD/VCR
OUTPUT
CHANNEL
PLAY
STOP
7
SPEED
8
SEARCH MODE
0
DISPLAY
TIME SEARCH STATUS/EXIT
3
6
9
+10
TIMER SET
CLEAR
MENU
ENTER
MEMORY
VCR
F.FWD
RECORD
PAUSE
SLOW
A B
REPEAT
TITLE
RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
SEARCH/TRACK
TOTAL TRACKS: 07
C
A
Start Exit
C
Using the SKIP H G Buttons to Select a Track
Press the DVD button, then press the SKIP G
button during playback to skip the current Track and move to the next
Track. Press the SKIP G
button repeatedly to skip subse-
quent Tracks. The Track number will appear briefly on the TV screen.
Press the SKIP H
button during playback to return to the
beginning of the current Track. Press the SKIP H
button
repeatedly to go to previous Tracks. The Track number will appear briefly on the TV screen.
If you press a SKIP button when playback is paused, you must press the PLAY button to resume playback.
If you press a SKIP button when playback is stopped, the selected
Track will begin playing automatically.
56 Title/Chapter Playback
DVD
Starting Playback at a Specific Title/Chapter
There are two ways to begin DVD playback at a specific Title or
Chapter. You may use the Number buttons or the SEARCH
MODE button.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
A
Using the Number Buttons to Select a Title/Chapter
During playback, press the DVD button, then press the
Number buttons to select a Chapter. The Chapter will be located and playback will start.
When playback is stopped, press the Number buttons to
select a Title. The Title will be located and playback will begin.
For single-digit Chapters or Titles, press a single Number button.
For example, to play Chapter three, press the Number 3 button during playback. To play Title two, press the Number 2 button while playback is stopped.
For Chapters/Titles numbered 10 and above, press the +10 button
(repeatedly, if necessary), then press the Number button of the second digit. For example, to play Chapter 12, press the +10 button, then press the Number 2 button during playback. For Title 22, press the +10 button twice, then press the Number 2 button when playback is stopped.
B
Using the SEARCH MODE Button to Select a Title/Chapter
To start playback at a specific Chapter, press the DVD button, then press the SEARCH MODE button once, then
press the Number buttons or the o p
buttons to enter the
Chapter number. Press the PLAY button to begin playback at the selected Chapter.
SEARCH/CHAPTER
A
A-B
1
POWER
VCR/TV
DVD
REW
CHANNEL
SKIP
2
DVD/VCR
OUTPUT
PLAY
STOP
3
TIMER SET
MEMORY
VCR
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
TOTAL CHAPTERS: 027
CHAPTER: [ 15]
B
Start Exit
To start playback at a specific Title, press the SEARCH MODE
button twice, then press the Number buttons or the o p
buttons to enter the Title number. Press the PLAY button to begin playback at the selected Title.
SEARCH/TITLE
TOTAL TITLES: 07
Start Exit
Helpful Hints
• Some discs may not allow you to change Titles in the Search Mode screen.
• During DVD playback, press the
SKIP buttons to go to the next chapter, return to the beginning of the current chapter, or go to a previous chapter.
Specific Time Playback 57
DVD AUDIO CD
Starting Playback at a Specific Disc Time
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the SEARCH MODE
button repeatedly (three times for DVDs or two times for
Audio CDs).
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [ _h_ _m_ _s ]
Start Exit
●
●
●
●
2
Use the Number buttons to enter the Disc time at which you want playback to begin.
Example: 1 hour, 23 minutes and 30 seconds
1 → +10 → +10 → 3 → +10 → +10 → +10 → 0
To enter zero, press the Number 0 (zero) button or press the
B button.
Make sure the time you enter is within the total time of the
Disc. If it is not, you will have to enter a different time.
If you make a mistake, press the B button repeatedly until you reach the item you need to correct (hour, minute, or second), then enter the correct information.
SEARCH/TIME
TOTAL TIME: 1h23m45s
TIME [1h05m30s]
1
POWER
TIMER SET
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
3
2
Start Exit
3
Within 30 seconds, press the PLAY button. Playback will start at the time that you specified.
Helpful Hint
• Specific time playback is not available with some discs or if MEMO-
RY OFF is activated for a DVD.
Details are on page 52.
58 Repeat Playback (Discs)
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the REPEAT button repeatedly until the repeat mode you want appears in the top left corner of the TV screen.
DVD
●
●
Repeatedly pressing the REPEAT button during playback lets you choose REPEAT CHAPTER, REPEAT TITLE, or REPEAT
OFF.
If a Chapter is playing repeatedly, then you press the Number buttons to select a new Chapter, the new Chapter will play repeatedly.
REPEAT
[CHAPTER]
Press the REPEAT button to select
REPEAT CHAPTER. The current
Chapter plays over and over.
1
REPEAT
[TITLE]
Press the REPEAT button again to select REPEAT TITLE. The entire
Title plays over and over.
POWER
TIMER SET
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
REPEAT
[OFF]
Press the REPEAT button again to select REPEAT OFF. Regular playback will resume.
1
AUDIO CD
●
●
Repeatedly pressing the REPEAT button during playback lets you choose REPEAT TRACK, REPEAT ALL and REPEAT OFF.
If a Track is playing repeatedly, then you press the Number buttons to select a new Track, the new Track will play repeatedly.
REPEAT
[TRACK]
Press the REPEAT button to select
REPEAT TRACK. The current
Track plays over and over.
REPEAT
[ALL]
Press the REPEAT button again to select REPEAT ALL. The entire
Audio CD plays over and over.
REPEAT
[OFF]
Press the REPEAT button again to select REPEAT OFF. Regular playback will resume.
Helpful Hint
• Repeat playback is not available with some discs.
A-B Repeat Playback 59
DVD AUDIO CD
You can play a section of an Audio CD or DVD repeatedly.
Follow these steps to set up the section that you want to play over and over.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button.
2
Play the Disc to the point at which you want repeated playback to begin.
3
Press the A-B REPEAT button to set the starting point (A).
2
1
REPEAT
[ A - ]
POWER
VCR/TV
DVD
REW
1
CHANNEL
SKIP
2
DVD/VCR
OUTPUT
MEMORY
PLAY
STOP
3
TIMER SET
VCR
F.FWD
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
4
4
Play or fast forward the Disc to the point at which you want repeated playback to end, then press the A-B
REPEAT button again.
The section will begin to play immediately, playing over and over until you cancel the A-B Repeat feature.
REPEAT
[ A - B ]
3-5
5
To cancel the A-B Repeat feature, press the A-B REPEAT button so that REPEAT [OFF] appears on the TV screen.
Regular Disc playback will resume.
REPEAT
[ OFF ]
Helpful Hints
• A-B Repeat playback is not available with some DVDs.
• With DVDs, the entire A-B repeat section must be within a single
Title.
• With Audio CDs, the A-B repeat section can contain multiple
Tracks.
• Point B must be later on the Disc than Point A.
60 Programmed Playback
AUDIO CD
You may determine the order in which Tracks will play. The order that you set is called the Program. To set up programmed playback, follow these steps.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
While playback is stopped, press the DVD button, then
press the MODE button. The program screen will appear.
PROGRAM
T [_ _] / 14 TOTAL 0h00m00s
2-3
1
Start, Delete Exit
2
Press the Number buttons or the o/p buttons to enter
the number of the first Track that you want to play.
Then, press the ENTER button to store the selected
Track in the Program.
● If you enter a wrong Track number, press the CLEAR button.
The last Track in the Program will be removed.
PROGRAM
T [_ _] / 14 TOTAL 0h07m46s
01: 12 position in program track number
1
POWER TIMER SET
VCR/TV
DVD/VCR
OUTPUT MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
4
Start, Delete Exit
3
Repeat step 2 until you have selected all the Tracks you wish to play in the Program.
●
Up to 20 Tracks may be stored in the Program.
●
Make sure the Track numbers you enter are available on the
Audio CD. If it is not, you will have to enter a different track.
4
Press the PLAY button. The Tracks will play in the order in which you programmed them. The Program will play once.
●
The contents of the program will be stored until you turn off the DVD/VCR or open the Disc tray.
Helpful Hints
• Specific Track and random playback cannot be combined with programmed playback. During programmed playback, the MODE and SEARCH MODE buttons will not operate.
• You may play a Program repeatedly. During programmed playback, press the REPEAT button so that REPEAT [ON] appears. The program will play over and over.
• To see which Tracks you stored in the Program, press the STOP button to stop playback, then press the MODE button so that the
PROGRAM screen appears.
• Programmed playback can only be started from the program screen.
AUDIO CD
You may play the Tracks of an Audio CD in Random order instead of the order in which they are recorded (1,2,3...). To set up Random Playback, follow these steps.
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
While playback is stopped, press the DVD button, then press the MODE button repeatedly so that the RANDOM screen appears.
RANDOM
1
Random Playback 61
POWER TIMER SET
VCR/TV
DVD/VCR
OUTPUT MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
2
Start Exit
2
While the RANDOM screen appears, press the PLAY but-
ton. The Tracks will play in random order. After all the Tracks on the disc have played once, playback will stop.
62 Audio Language/Sound Mode
The DVD/VCR allows you to select a Language for DVDs or a
Sound Mode for Audio CDs. Before you begin, put the DVD/VCR in DVD mode.
● Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
Language
DVD
1
Press the DVD button, then press the AUDIO button dur-
ing playback, then press the o/p buttons to select the
desired language.
● The language can be changed only if multiple languages are available on the DVD.
AUDIO 1 : E N G / 8
Press the o/p buttons.
Press the o/p buttons again.
AUDIO 2 : F R E / 8
1
POWER TIMER SET
VCR/TV
DVD/VCR
OUTPUT MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Press the o/p buttons again.
AUDIO 8 : J P N / 8
HELLO
➜
BONJOUR
•••
AUDIO 1 AUDIO 2
Sound Mode
AUDIO CD
1
Press the DVD button, then press the AUDIO button dur-
ing playback, then press the o/p buttons until the sound
mode you want appears.
● When producers record an Audio CD, they record the sound on two channels - the left and the right. You can choose to hear the sound on the left channel, the sound on the right channel, or the sound on both channels (Stereo). You will select L-CH,
R-CH, or STEREO.
AUDIO S T E R E O
Both right and left channels are active (stereo).
Only the right channel is active.
AUDIO R - C H
Only the left channel is active.
Helpful Hints
• If a desired language is not shown
after pressing the o/p buttons sev-
eral times, the DVD does not have that language.
• The display will disappear after about 15 seconds.
• Some DVDs only allow you to change the language in the Disc menu.
• When you use the DIGITAL AUDIO
OUT COAXIAL jack, the sound mode of audio CDs cannot be changed.
AUDIO L - C H
DVD
The DVD/VCR allows you to select a language for subtitles from those available on the disc.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the SUBTITLE button
during playback. The subtitle menu will appear on the TV screen.
2
Within 15 seconds, press the o/p buttons to select a sub-
title language. Select a language from those available on the
DVD.
SUBTITLE 1 : E N G / 8
Press the o/p buttons.
1
2
1
SUBTITLE 2 : F R E / 8
Press the o/p buttons to select another language.
Subtitle 2
Subtitle Language 63
POWER TIMER SET
VCR/TV
DVD/VCR
OUTPUT MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
SUBTITLE 0 : O F F / 8
To turn off subtitles, press the o/p buttons repeatedly until OFF appears in the subtitle menu.
No subtitles
➜
•••
HELLO
SUBTITLE 1
BONJOUR
SUBTITLE 2
3
The subtitle menu will disappear after about 15 seconds.
Helpful Hints
• With some DVDs, you may select a subtitle language in the Disc menu.
• If the desired language is not shown
after pressing the o/p buttons sev-
eral times, the Disc does not have subtitles in that language.
• The subtitles may be delayed for a few seconds.
• Your subtitle selection will be cancelled if you open the Disc tray or turn off the power. The default setting of the DVD will be selected again.
64 Camera Angles
DVD
Some DVDs contain scenes that were recorded from different angles. You may select a camera angle with the DVD/VCR.
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
POWER
TIMER SET
1
Press the DVD button, then press the ANGLE button during playback.
2
Within 15 seconds, press the o/p buttons to select a dif-
ferent angle.
ANGLE [ 1 ] / 8
ANGLE [ 2 ] / 8
1
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
REW
PLAY
STOP
Angle 1 (default) of eight possible angles
Press the o/p buttons to select another angle.
Angle 2
RECORD
1
CHANNEL
SKIP
2 3
2
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
PAUSE
F.FWD
1
Press the o/p buttons again.
Angle 8
ANGLE [ 8 ] / 8
●
●
If the Disc contains sequences recorded from different camera angles, the angle symbol will appear at the bottom-right of the screen. You can change the camera angle when the symbol appears on the screen.
The camera angle cannot be changed if the Disc does not contain sequences recorded from different camera angles.
Helpful Hints
• The ANGLE ICON must be set to
ON in order for the angle symbol to appear as described in step 2. To set ANGLE ICON to ON, see page
74.
• If the angle status appears on the screen (for example, ANGLE [1]/8), the angle symbol will not appear on the screen.
Status Display (Discs) 65
DVD AUDIO CD
Accessing the Status Display
You can check the information about the current Disc by pressing the DISPLAY button on the remote control.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
Press the DVD button, then press the DISPLAY/STATUS/
EXIT button repeatedly to access or remove the status displays.
DVD
TITLE
TIME
REMAIN
: 01/04
0h24m14s
0h05m25s
CHAPTER : 001/010
TIME 0h02m25s
REMAIN 0h01m31s
• Current Title number / total number of Titles
• Elapsed time of the current Title
• Remaining time of the current Title
• Current Chapter number / total number of
Chapters in the current Title
• Elapsed time of the current Chapter
• Remaining time of the current Chapter
AUDIO : 1.ENGLISH
DOLBY DIGITAL
6CH
SUBTITLE : 2.FRENCH
ANGLE : 8/8
VIRTUAL 3D
• Current language for the sound
• Current audio format (DOLBY DIGITAL 5.1
Channel is displayed as DOLBY DIGITAL 6 CH.)
• Current language for the subtitles
• Selected angle / total number of angles
• VIRTUAL 3D setting (appears only if
VIRTUAL 3D is ON)
1
POWER
TIMER SET
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
No display
AUDIO CD
TRACK
TIME
REMAIN
: 01/04
0h05m25s
0h01m31s
PROGRAM
• Current Track number / total Track number
• Elapsed time of the current Track
• Remaining time of the current Track
• Current play mode
No display
66 Parental Lock Levels
Parental Lock allows you to block viewing of DVDs that have ratings that exceed your selections. To set the levels, follow the steps below.
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
While playback is stopped, press the DVD button, then press
the SETUP button. The setup screen will appear.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
2
Press the Number 4 button to select LOCK.
The SETUP/LOCK menu will appear.
SETUP/LOCK
PASSWORD [ _ _ _ _ ]
1. LEVEL [NONE]
2. CHANGE PASSWORD
Enter, Back
3
Press the Number buttons to enter your 4-digit password.
●
When doing this for the first time, enter any 4 digits. That number will be the password until you change it.
SETUP/LOCK
PASSWORD [ ]
1. LEVEL [NONE]
2. CHANGE PASSWORD
Enter, Back
4
Press the Number 1 button to select LEVEL.
SETUP/LOCK
PARENTAL LOCK
NONE
LEVEL 8 [PLAY ALL]
LEVEL 7 [NC-17]
LEVEL 6 [R]
LEVEL 5
LEVEL 4 [PG13]
LEVEL 3 [PG]
LEVEL 2
LEVEL 1 [G]
Enter
Parental Lock is off.
All DVDs will play, regardless of rating.
DVDs rated NC-17 or higher will not play.
DVDs rated R or higher will not play.
DVDs rated PG13 or higher will not play.
DVDs rated PG or higher will not play.
DVDs rated G or higher will not play. Only
DVDs that are not rated will play.
5
Press the o/p buttons to select the level you desire, then press
the ENTER button. For example, if you want to play Discs rated
PG13, you must select LEVEL 5 or higher.
The SETUP/LOCK menu will reappear. The level you selected will appear on the screen beside LEVEL.
6
Press the RETURN button twice to remove the menu.
POWER TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
1
PLAY
REW F.FWD
STOP
RECORD
1
CHANNEL
SKIP
2
PAUSE
4
2
3
5
1
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER
RETURN
SETUP
MODE AUDIO SUB TITLE ANGLE
RATING EXPLANATIONS
• NC-17 - Under 17 not admitted
• R - Restricted; under 17 requires accompanying parent or adult guardian
• PG13 - Unsuitable for children under 13
• PG - Parental Guidance suggested
• G - General Audience
3
6
Helpful Hints
• Some DVDs are not compatible with
Parental Lock. Make sure the DVD plays according to the Parental Lock settings you have made.
• The DVD/VCR will not allow you to change LEVEL settings until you enter the correct password.
• When you try to play a Disc that has a rating that exceeds the level you set, a message will appear on the screen, indicating the Disc cannot be played.
If this happens, press the
OPEN/CLOSE button to remove the
Disc, then select a level that allows playback. Or select NONE to turn off
Parental Lock. Load the Disc again and begin playback as usual. Some
Discs may allow you to simply enter your 4-digit password, then begin playback automatically. Follow the instructions provided by the Disc message.
Parental Lock Password 67
You can change the password as often as you like. To do so, follow these steps.
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
While playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
2
Press the Number 4 button to select LOCK.
The SETUP/LOCK menu will appear.
SETUP/LOCK
PASSWORD [ _ _ _ _ ]
1. LEVEL [NONE]
2. CHANGE PASSWORD
1
Enter, Back
●
3
Press the Number buttons to enter the 4-digit password.
When doing this for the first time, enter any 4 digits. That number will be the password until you change it.
SETUP/LOCK
PASSWORD [ ]
1. LEVEL [NONE]
2. CHANGE PASSWORD
1
4
2
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
3,5
6
Enter, Back
4
Press the Number 2 button to select CHANGE PASS-
WORD. The first space in the PASSWORD will start flashing.
5
Press the Number buttons to enter your new password.
6
Press the RETURN button twice to remove the menu.
Helpful Hints
• Write down the password in case you forget it.
• To erase the old password, press the POWER button to turn off the
DVD/VCR. Then, press and hold the
DVD STOP button on the DVD/VCR while pressing the POWER button on the DVD/VCR to turn on the power again. When “HELLO” appears on the display panel, you may release the DVD STOP button.
Follow the steps on this page to set the password that you desire.
68 Audio Settings
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
While playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
2
Press the Number 3 button to select AUDIO.
SETUP/AUDIO
1. DIGITAL OUT
2. VIRTUAL 3D [OFF]
1
1
POWER
TIMER SET
2-3
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Enter, Back Exit
3
Press the corresponding Number button to select an item: DIGITAL OUT or VIRTUAL 3D.
SETUP/AUDIO
DIGITAL OUT
1. PCM [48kHz]
2. DOLBY DIGITAL [ON]
3. DTS [ON]
• Sets the sample rate for playing a disc
recorded with high sound quality
• Select when a Dolby Digital decoder
is connected.
• Select when a DTS decoder is connected.
Enter, Back Exit
To change the DIGITAL OUT settings, go to step 4.
SETUP/AUDIO
VIRTUAL 3D
1. OFF
2. ON
• Select ON to activate the 3D effect.
Enter, Back Exit
To change the VIRTUAL 3D setting, press the corresponding
Number button, then go to step 5.
This unit employs TruSurround system
of SRS Labs, Inc. as the
VIRTUAL 3D technology.
TruSurround and the symbol are trademarks of
SRS Labs, Inc. in the United States and selected foreign countries.
TruSurround technology is incorporated under license from SRS Labs, Inc.
Helpful Hint
• To enjoy Dolby Digital Surround or
DTS Surround sound, you must have the DVD/VCR connected to a
Dolby Digital or DTS decoder.
Details are on page 14.
4
To change the PCM, DOLBY DIGITAL, or DTS settings, press the corresponding Number button to select the desired item, then press the Number button to choose the setting (i.e. ON or OFF).
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
Enter, Back Exit
• Audio signals are converted to
48 kHz/16 bit signals when playing
a DVD recorded with high sound quality
(48 kHz/20 bit/24 bit, 96 kHz).
• Sound is reproduced at 96 kHz if a DVD
is recorded with high sound quality. If you
are playing 48 kHz discs or if 4:3 LETTER
BOX is selected, sound is reproduced at 48 kHz.
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON • Select ON when a Dolby Digital decoder is used.
Enter, Back Exit
SETUP/AUDIO
DTS
1. OFF
2. ON
• Select ON when a DTS decoder is used.
Enter, Back Exit
5
Press the SETUP button to remove the menu.
Audio Settings (cont’d) 69
4
5
POWER TIMER SET
VCR/TV
DVD/VCR
OUTPUT MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
70 Language Settings
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
DVD
1
While playback is stopped, press the DVD button, then
press the SETUP button. The setup screen appears.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
2
Press the Number 1 button to select LANGUAGE.
SETUP/LANGUAGE
1. AUDIO
2. SUBTITLE
[ORIG]
[AUTO]
3. DISC MENU [AUTO]
4. PLAYER MENU [ENG]
1
2-3
Enter, Back Exit
3
Press a Number button to select an item: AUDIO, SUB-
TITLE, DISC MENU, or PLAYER MENU.
1
SETUP/LANGUAGE
AUDIO
1. ORIGINAL
2. ENGLISH
3. SPANISH
4. FRENCH
5. OTHER
Enter, Back Exit
• The original language of each disc will be selected.
• Voice is played back in English.
• Voice is played back in Spanish.
• Voice is played back in French.
• You can select other languages for audio playback.
POWER
TIMER SET
VCR/TV
DVD
DVD/VCR
OUTPUT
MEMORY
VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
SETUP/LANGUAGE
SUBTITLE
1. AUTO
2. ENGLISH
3. SPANISH
4. FRENCH
5. OTHER
Enter, Back Exit
• Subtitles are shown in the automatically selected language.
• Subtitles are shown in English.
• Subtitles are shown in Spanish.
• Subtitles are shown in French.
• You can select other languages for subtitles.
SETUP/LANGUAGE
DISC MENU
1. AUTO
2. ENGLISH
3. SPANISH
4. FRENCH
5. OTHER
Enter, Back Exit
• The disc menu is shown in the automatically selected language.
• The disc menu appears in English.
• The disc menu appears in Spanish.
• The disc menu appears in French.
• You can select other languages for the disc menu.
SETUP/LANGUAGE
PLAYER MENU
1. ENGLISH
2. SPANISH
3. FRENCH
• The on-screen display and DVD Player menus appear in English.
• The on-screen display and DVD Player menus appear in Spanish.
• The on-screen display and DVD Player menus appear in French.
Enter, Back Exit
Go to step 4 to change the settings within AUDIO, SUB-
TITLE, DISC MENU or PLAYER MENU.
Helpful Hints
• If the original or automatic settings for AUDIO and SUBTITLE are the same language, the subtitles will not be shown.
• Language settings for AUDIO, SUB-
TITLE, and DISC MENU are not available with some discs. Use the
AUDIO and SUBTITLE buttons instead to select different languages for the audio and subtitles.
Details are on pages 62 and 63.
• Not all discs provide different languages for audio, subtitles, or disc menus.
Language Settings (cont’d) 71
●
●
4
Press a Number button to select a setting.
If OTHER is selected on the AUDIO, SUBTITLE or DISC
MENU screen, the COUNTRY CODE screen will appear. Press four Number buttons to enter the country code you desire, then press the ENTER button. Refer to the list on page 72. The codes are listed alphabetically, according to language.
You can only select other languages for AUDIO, SUBTITLE, and
DISC MENU if the language is available on the Disc.
POWER
TIMER SET
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
SETUP/LANGUAGE
COUNTRY CODE
[ _ _ _ _ ]
REW
PLAY
F.FWD
STOP
Enter, Back Exit
5
Press the SETUP button to remove the menu.
4
5
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Helpful Hint
• If you accidentally set the PLAYER
MENU LANGUAGE to French or
Spanish and need English:
1) Press the DVD button, then press the SETUP button.
2) Press the Number 1 button
(IDIOMA or LANGUE).
3) Press the Number 4 button
(MENÚ EN PANTALLA or MENU
SUR ÈCRAN).
4) Press the Number 1 button
(INGLÉS or ANGLAIS).
5) Press the SETUP button to remove the menu.
72 Language Settings (cont’d)
Language Country Code Language Country Code Language Country Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bangla
Bashkir
Basque
Bengali
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese (CHI)
Corsican
Croatian
Czech
Danish
Dutch (DUT)
English (ENG)
Esperanto
Estonian
Faroese
Fiji
Finnish
French (FRE)
Frisian
Gaelic (Scots)
Galician
Georgian
German (GER)
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
F-H
4765
4771
4772
4860
4847
5167
4860
5072
4748
4747
4752
6563
4759
4764
5471
4854
4855
4864
4853
5971
4851
5261
5256
5255
5264
5271
5350
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
I-K
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian (ITA)
Japanese (JPN)
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean (KOR)
Kurdish
L-N
Laothian
Latin
Latvian
Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
O-R
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto
Persian
Polish
Portugese
Pushto
Quechua
Rhaeto-Romance
Romanian
Russian
5861
5847
5868
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6258
6266
6265
6367
6459
6461
6467
6149
6164
6159
6247
6265
5247
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5565
5560
5547
5551
5557
5347
5566
6560
6550
6555
6565
6557
6558
6561
5165
6559
6553
6457
6564
6554
6566
6660
6567
6569
6568
6658
6653
6647
6666
6652
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6961
4971
6961
7054
5655
7161
7267
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
S
Samoan
Sangho
Sanskrit
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish (SPA)
Sundanese
Swahili
Swedish
T
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
● Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
When playback is stopped, press the DVD button, then
press the SETUP button. The setup screen will appear.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
2
Press the Number 2 button to select VIDEO.
SETUP/VIDEO
1. TV MODE
2. STILL MODE
[4:3LB]
[AUTO]
1
2-4
Video Settings 73
POWER
TIMER SET
VCR/TV
DVD/VCR
OUTPUT
MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8 9
+10
SEARCH MODE
0
DISPLAY CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Enter, Back Exit
3
Press the corresponding Number button to select an item: TV MODE or STILL MODE.
SETUP/VIDEO
TV MODE
1. 4:3 PAN&SCAN
2. 4:3 LETTER BOX
3. 16:9 WIDE
Enter, Back Exit
• Full-height pictures are shown, with one
or both sides trimmed.
• Wide screen (full-width) pictures are
shown, with black bars at top and bottom.
• Select if a wide screen TV
is connected to the DVD Player.
SETUP/VIDEO
STILL MODE
1. AUTO
2. FIELD
3. FRAME
• AUTO is normally selected.
• Select if pictures are blurred in auto mode.
• Select to show Still pictures in high resolution.
Enter, Back Exit
4
Press the corresponding Number button to select a setting.
5
Press the SETUP button to remove the menu.
1,5
Helpful Hint
• You may select a different TV
MODE setting only if it is available on the Disc.
74 Other Menu Settings
●
Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.
1
When disc playback is stopped, press the DVD button,
then press the SETUP button. The setup screen will appear.
SETUP
1. LANGUAGE
2. VIDEO
3. AUDIO
4. LOCK
5. OTHERS
Enter / Exit
2
Press the Number 5 button to select OTHERS.
SETUP/OTHERS
1. OSD MESSAGE [ON]
2. ANGLE ICON [ON]
3. BACKGROUND [BLUE]
1
2-4
Enter, Back Exit
3
Press the corresponding Number button to select an item:
OSD MESSAGE, ANGLE ICON, or BACKGROUND.
SETUP/OTHERS
OSD MESSAGE
1. ON
2. OFF
• Select ON to display messages on the screen, such as PLAY, STOP, etc.
1,5
Enter, Back Exit
SETUP/OTHERS
ANGLE ICON
1. ON
2. OFF
• Select ON to display the angle icon.
POWER TIMER SET
VCR/TV
DVD/VCR
OUTPUT MEMORY
DVD VCR
PLAY
REW F.FWD
STOP
1
CHANNEL
SKIP
2 3
RECORD
PAUSE
4 5 6
7
SPEED
8
SEARCH MODE
0
DISPLAY
9
+10
CLEAR
SLOW
A B
TIME SEARCH STATUS/EXIT
MENU
REPEAT
TITLE
ENTER RETURN
SETUP MODE AUDIO SUB TITLE ANGLE
Enter, Back Exit
SETUP/OTHERS
BACKGROUND
1. BLUE
2. GRAY
• Turns the Player menu background to blue
• Turns the Player menu background to gray
Enter, Back Exit
4
Press a Number button to select a setting.
5
Press the SETUP button to remove the menu.
Care and Maintenance / Specifications 75
Care and Maintenance
Cleaning the DVD/VCR
• Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the DVD/VCR. Do not spray insecticide liquid near the DVD/VCR. Such chemicals may discolor the surface or damage the DVD/VCR.
Don’t use cleaners.
Cleaning a Disc
• Use a soft, dry cloth to wipe the Disc.
• Wipe the Disc in a straight line from the center to the edge. Never wipe the Disc in a circular motion.
Wipe Discs from the center to the edge.
• Do not use detergent or abrasive cleaning agents.
• Handle the Discs so that fingerprints and dust do not adhere to the surfaces of the Discs.
Handle Discs by the edges.
• Always store the Disc in its protective case when it is not in use.
Keep the Disc in its case.
Checking the Laser
• If the DVD/VCR does not operate as described in this owner’s manual, the laser may be dirty.
Consult an Authorized Service Center for inspection and cleaning of the laser.
Specifications
Video Heads
Four heads - Hi-Fi
Antenna
VHF/UHF – 75 ohm external antenna terminal
VHF Output Signal
Channel 03 or 04 (switchable)
75 ohms unbalanced
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Cable TV Channels
1-125
Product Type
Digital Video Disc Player & Video Cassette
Recorder
Playable Discs
DVD-Video
Audio CD
Color System
NTSC
Frequency Response
DVD (linear sound):
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
Audio CD: 20 Hz to 20 kHz
Signal-to-Noise Ratio (S/N Ratio)
Audio CD:
110 dB EIAJ (Electronic Industries Association of
Japan)
Dynamic Range
DVD (linear sound): 95 dB
Audio CD: 94 dB (EIAJ)
Total Distortion Factor
Audio CD: 0.007% (EIAJ)
Wow and Flutter
Below the measurement limitation
(±0.001% W PEAK) (EIAJ)
Power Requirement
120V AC +/- 10%, 60 Hz +/- 0.5%
Power Consumption
Power on: 37 W
Standby (power off): 4 W
Operating Temperature
41°F (5°C) to 104°F (40°C)
Relative Humidity
30% to 80%
Dimensions
17-1/8” (W) x 4-1/16” (H) x 12-11/16” (D)
(435mm x 103mm x 323mm)
Weight
11.0 lbs. (5.0 kg.)
NOTE: Designs and specifications are subject to
76 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.
The DVD/VCR has no power.
• Make sure the power cord is connected completely to an AC (alternating current) outlet.
• Press the POWER button to turn on the DVD/VCR. “HELLO” will appear briefly on the display panel as the power is turning on.
The remote control will not operate the DVD/VCR.
• Aim the remote control directly at the DVD/VCR’s remote sensor. Details are on page 26.
• Remove all obstacles between the remote control and the DVD/VCR.
• Inspect and/or replace the batteries in the remote control. Details are on page 15.
• Use the remote control within 23 feet of the DVD/VCR.
• Press the DVD button, then try the other DVD feature buttons. (Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR. This means the DVD/VCR is in DVD mode.)
• Press the VCR button, then try the other VCR feature buttons. (Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR. This means the DVD/VCR is in VCR mode.)
• In VCR mode, make sure the VCR/TV light appears on the front of the DVD/VCR. If it does not, press the VCR/TV button once.
No picture in DVD mode.
• Make sure the video cable is connected correctly. You may connect either the yellow video cable (supplied), an optional S-Video cable, or optional component video cables. Details are on pages 12-14.
• Make sure the TV is set to the correct Video In channel (usually the AUX IN, A/V IN, Auxiliary In,
Component Video In or S-Video In channel). Check your TV owner’s manual for details.
• Insert a Disc that is playable on this DVD/VCR. Details are on page six.
Disc cannot be played.
• Insert a playable Disc. Details are on page six.
• Place the Disc correctly in the recesses in the Disc tray. If the Disc is one-sided, place the Disc in the tray with the label facing up. If the Disc is two-sided, make sure the side you want to play is facing up.
• Clean the Disc.
• Cancel the parental lock, enter the password, or change the control level. Details are on pages 66-67.
• Make sure the Disc is labelled for use in Region 1 or ALL regions. Details are on page six.
Helpful Hints (cont’d) 77
No sound
• Connect the audio cables firmly. Make sure the cables are connected to the AUDIO IN jacks on the TV or audio equipment. Details are on pages 12-14.
• Check the audio settings of the DVD/VCR. Details are on pages 62 and 68-69.
• Turn on the power of the audio equipment and make sure it is set to the correct channel, usually
Auxiliary IN. Refer to the owner’s manual of the audio equipment for details.
• Check the audio settings of the Disc. For example, you may have selected “soundtrack” playback on a
DVD. Only the music of the movie will play, not the characters’ dialog; music might not be recorded throughout the entire DVD.
Distorted picture
• Connect the DVD/VCR directly to the TV. Details are on pages 8-14.
• There are some cases where the picture may be distorted slightly; this is not a malfunction of the
DVD/VCR.
The camera angle cannot be changed.
• The DVD might not contain segments recorded from different camera angles. See if multiple angles are available. Details are on page 64.
The audio or subtitle language cannot be changed.
• The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or subtitles in multiple languages. See if other languages are available. Details are on pages 62-63.
"No feature" symbol appears on the screen, prohibiting an operation.
• That operation is currently prohibited by the DVD/VCR or is not available on the Disc. Details are on
page five.
The DVD/VCR switches to VCR mode automatically.
• The DVD/VCR will switch to VCR mode automatically if disc playback is paused or stopped for more than 30 minutes (and no buttons are pressed on the remote control or the DVD/VCR).
A screen saver appears on the TV screen.
• The DVD whale will appear on the TV screen if Disc playback is stopped for more than one minute (and no buttons are pressed on the remote control or the DVD/VCR). The DVD whale moves around on the screen to prevent damage to your TV’s picture tube. A prolonged still image, including TV station identification logos or video games, may damage the picture tube.
78 Helpful Hints (cont’d)
Power Failure
• Timer recordings, the clock setting, the language selection, and channel setup may be lost if the power fails for more than one minute. Follow the steps on pages 16 and 20. Then, see pages 36-38 to reprogram your timer recordings.
A TV program cannot be recorded.
• Put the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR.
• Check the connections between the DVD/VCR, TV, antenna/cable, and Cable Box/Direct Broadcast
System (if applicable). Details are on pages 8-11.
• Make sure the tape has a record tab. Details are on page seven.
• Check the TV/VCR position. Details are on page 25.
• Check the CH3/CH4 switch. Details are on pages 8-11. Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the TV. Details are on page
12.
The DVD/VCR will not perform a timer recording.
• Make sure the recording start and stop times are set correctly. Details are on pages 36-39.
• Make sure a tape is in the DVD/VCR and the tape has a record tab. Details are on page seven. If, after programming a timer recording, you press the TIMER SET button without putting a tape in the
DVD/VCR, the TIMER SET light will blink.
• If the record tab on a tape is missing, the DVD/VCR will eject the tape. The TIMER SET light will blink.
• Press the TIMER SET button to put the DVD/VCR in standby mode for the timer recording. The TIMER
SET light should appear on the front of the DVD/VCR.
• Make sure the clock is set. Details are on page 20.
• The DVD/VCR may not perform or continue a timer recording if a power failure of more than one minute occurs.
• If you have a Cable Box/Direct Broadcast System, timer recordings are programmed differently. Details
are on page 10.
• Finish programming a timer recording at least five minutes before the recording is set to begin.
• 12 p.m. is noon; 12 a.m. is midnight.
There is no picture or the picture is noisy or contains streaks during video cassette tape playback.
• Put the DVD/VCR in VCR mode. Press the DVD/VCR OUTPUT button so that the green VCR light appears on the front of the DVD/VCR.
• Make sure the TV is on the same channel as the DVD/VCR’s CH3/CH4 switch. Or, if you connected the
DVD/VCR to the TV using audio and video cables, select the correct audio and video in channel at the
TV. Details are on page 12.
• Make sure the DVD/VCR is in VCR position. Press the VCR/TV button so that the VCR/TV light appears on the front of the DVD/VCR.
• Make sure channel 03 or 04 is properly adjusted at the TV.
• Adjust the tracking. Details are on page 45.
• TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR away from the TV.
The Number buttons won’t work for channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. Details are on page 30.
TV programs cannot be watched normally.
• Put the DVD/VCR in VCR mode, then put it in TV position. Press the DVD/VCR OUTPUT button so that the green VCR light appears. Then, press the VCR/TV button so that the VCR/TV light disappears from the front of the DVD/VCR. Details are on page 29.)
• Check the connections between the DVD/VCR, TV, antenna/cable, and Cable Box/Direct Broadcast
System (if applicable). Details are on pages 8-11.
Tape cannot be inserted.
• Insert the tape, window side up, with the record tab facing you.
• Make sure a tape isn’t already in the DVD/VCR by pressing the STOP/EJECT button on the DVD/VCR.
• Gently push on the center of the tape when putting it in the DVD/VCR. Never force the tape into the
DVD/VCR.
• If a timer recording is programmed and the DVD/VCR is in standby mode for the timer recording, you can not insert a tape without a record tab.
Helpful Hints (cont’d) 79
Tape cannot be removed.
• Make sure the power plug is completely connected to a power outlet.
• You have set a timer recording. Press the TIMER SET button to temporarily cancel standby mode. Then, press the STOP/EJECT button on the DVD/VCR to eject the tape. Be sure to insert a tape and press the
TIMER SET button to put the DVD/VCR in standby mode for the timer recording.
• Unplug the DVD/VCR power cord for five minutes. Then, plug in the power cord again, then press the
POWER button on the DVD/VCR. If the tape does not eject, press the STOP/EJECT button on the DVD/VCR three to five times. If the tape still does not eject, you may need to have an authorized servicer remove the tape.
DVD/VCR ejects the tape when the RECORD button is pressed or when the TIMER SET button is pressed to set a timer recording.
• Make sure the tape has a record tab. Details are on page seven.
Poor reception
• You may need to tune your TV again.
The motor (cylinder) rotates even when the tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism allows the tape mechanism to switch from Stop mode to Play mode in one second.
Direct Broadcast System Hookups
• Watching one TV channel while recording another may not be possible if you have a DBS hookup. You may have to set your TV to channel 03 or 04, then make your channel selections at the DBS.
• With many DBS hookups, if you use accessory audio and video cables to connect your DVD/VCR to your TV, you will have to put your DVD/VCR in Line Input mode (channel 001 or 002).
Line Input mode
• If you accidentally enter Line Input mode (AV FRONT or AV REAR will appear on your TV screen briefly), press the CHANNEL o/p buttons or use the Number buttons to select another channel.
Hi-Fi Stereo Sound
• During playback, Hi-Fi audio may temporarily revert to normal audio when you adjust tracking. This is normal.
• When connecting the DVD/VCR to a stereo TV, you will only get stereo sound if you use audio cables to connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, and if the TV is in Line (Auxiliary) Input mode.
• When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, the stereo light on the TV might not glow. But, as long as the status display indicates you are receiving a stereo signal, you are receiving a stereo signal. This is normal. Details are on page 46.
• Only tapes recorded in Hi-Fi audio will play back in Hi-Fi audio. Tapes recorded in normal audio will play back in monaural audio.
Cleaning the Video Heads
• Your DVD/VCR automatically cleans the video heads of the VCR each time you insert a tape. However, the heads may become dirty. If so, use a commercially-available head cleaner or have an authorized servicer clean the video heads. Eventually, the heads may need to be replaced.
The playback picture is too dim, too bright, or fluctuates in brightness.
• Some programs may be broadcast with copyright protection technology in order to protect the rights of copyright owners. This technology is used on programs that are recorded on video tapes or Digital
Video Discs (DVDs), as well as some programs broadcast by antenna/cable/satellite television channels.
Programs broadcast with copyright protection technology may not record clearly. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may not be clear. Tapes of copyright protected programs may have a picture that is dark or dim, or the brightness of the picture may fluctuate. Therefore, you should avoid recording or playing copies of copyright protected programs.
This DVD/VCR incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
80 Limited Warranty
Digital Video Disc Player / Video Cassette Recorder Combination
90 days Free Exchange / 91 days–One Year Reduced-Cost Exchange
WHO IS COVERED?
You must have proof of the date of purchase to exchange your product. A sales receipt or other document showing the date that you purchased the product is considered such proof.
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of date of purchase. Attach it to the owner’s manual and keep both nearby. Also keep the original box and packing material in case you need to return your product.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For 90 days thereafter, you may exchange the defective product for a new or renewed product at the store from which it was purchased or through Philips. Either exchange is made at no cost to you.
From 91 days to one year from the date of purchase, you will pay a preset exchange fee to obtain a new or renewed product. Follow the exchange procedures on the next page. This exchange opportunity ends one year after the date of purchase. The replacement product is covered only for the warranty period of the original product. When the warranty on the original product expires, the warranty on all replaced products also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
• shipping charges to return defective product.
• labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product.
• product repair and/or part replacement because of improper installation, abuse, neglect, misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics.
• reception problems caused by signal conditions or cable or antenna systems outside the product.
• a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
• incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders.
• a product that is used for commercial or institutional purposes (including but not limited to rental purposes).
WHERE IS EXCHANGE AVAILABLE?
Warranty exchange is available in all countries where the product is officially distributed by Philips Consumer
Electronics. In countries where Philips Consumer
Electronics does not distribute the product, the local
Philips service organization will attempt to exchange the product, although there may be a delay if the appropriate product is not readily available.
BEFORE EXCHANGING THE PRODUCT...
Please check your owner’s manual before exchanging the product. Adjustments of the controls discussed there may save you time and money.
LIMITATION OF LIABILITY AND REMEDY...
Philips is not liable under any circumstances for any direct, indirect, special, incidental, or consequential damages, howsoever incurred, even if notified of the possibility of such damages.
To the extent permitted by local law, the remedies provided in this warranty statement are your sole and exclusive remedy.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.
TO EXCHANGE YOUR PRODUCT IN THE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Follow the instructions stated previously in the “What is
Covered” section, or refer to the exchange instructions on the next page.
In the U.S.A., Puerto Rico, and U.S. Virgin Islands, all implied warranties, including the implied warranties of noninfringement, merchantability and fitness for a particular purpose, are specifically disclaimed, and to the extent inconsistent with law of the locality of the user, limited in duration to the duration of this express warranty. Because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.
TO EXCHANGE A PRODUCT IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
In Canada, this warranty is given in lieu of all other warranties. There are no other warranties, express or implied, including any implied warranties of merchantability or fitness for a particular purpose.
TO GET OUT-OF-WARRANTY EXCHANGE...
In the U.S.A., Puerto Rico, or U.S. Virgin Islands, contact
Philips Service Solutions Group at 1-800-531-0039 to obtain the cost of out-of-warranty exchange.
REMEMBER...
Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.
MODEL #__________________________________
SERIAL #__________________________________
Philips Service Solutions Group, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800
EL6473E002 /3-01
Limited Warranty (cont’d) 81
EXCHANGE INSTRUCTIONS
If your product is defective, you may be able to exchange it at the store from which it was purchased.
Most stores display a Return Policy. If not, ask the manager or sales associate how many days you have to exchange a product with them. After the store’s return period has expired, or if the store does not have an exchange program, you may exchange the product with Philips if you have your original sales receipt.
To exchange your product with Philips (per the warranty conditions stated previously), remember:
• If you exchange the product within 90 days of the original purchase, there is no cost to you.
• If you exchange the product more than 90 days after but less than one year after the day of original purchase, contact Philips Service Solutions Group (PSSG) at 1-800-531-0039 to determine the preset cost for exchange.
• After 12 months from the day of original purchase, contact PSSG at 1-800-531-0039 for information regarding out-of-warranty exchange.
• If you do not have your original sales receipt, or if you have any questions, call PSSG at 1-800-531-0039.
To obtain a replacement product from Philips:
1. Contact PSSG at 1-800-531-0039 to determine the cost for exchange.
2. Complete the Exchange Form below.
3. Pack the product and its accessories in the original box or a suitable alternative. You will receive replacement accessories with your replacement product. For packing details, call 1-800-531-0039.
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into an envelope. DO NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return
Documents Enclosed.” Place this envelope in the box with the product.
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight prepaid, to:
Philips Recovery Center
Rojas 6
12420 Mercantile Avenue
El Paso, TX 79928
ATTENTION: DVD/VCR COMBINATION EXCHANGE
A replacement will be sent to you via UPS within 48 business hours of Philips’ receipt of the product.
EXCHANGE FORM
Your Address (street address to which replacement should be delivered, no P.O. boxes allowed):
Name:
Street Address: Apt. #:
City:
Phone (day):
State/Province:
Phone (night):
Zip Code/Postal Code:
Exchange Fee: + Sales Tax: = Total:
Method of Payment: (Check one. Please, no cash or CODs.)
_____ Check/Money order Check/Money order No.
_____
_____
_____
_____
American Express
Visa
Novus/Discover
Mastercard
Account number
___________________________
___________________________
___________________________
___________________________
Expiration date
__________
__________
__________
__________
Signature: _____________________________________________________________
Detailed reason for return, use additional paper if necessary: _____________________________________________
_______________________________________________________________________________________________
Model Number Serial Number
Remember, the return box should include the following:
• The product,
• Completed Exchange Form and sales receipt,
• Accessories supplied with the product, and
• Payment, if applicable.
82 Glossary
AUDIO IN/OUT Jacks: jacks located on the front and back of the DVD/VCR which are used to receive audio from another source (IN) or to send audio to another system (OUT).
Automatic Channel Setup: process in which the DVD/VCR memorizes all available TV channels. Then, when you press the CHANNEL o/p buttons, you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69).
• Cable – all standard channels can be received without a Cable Box.
Cable Box/DBS Output Channel: 03 or 04.
CD: Compact Disc (audio)
Coaxial jack: Used to send digital audio to a decoder or amplifier, allowing you to adjust the volume at the decoder or amplifier. This connection provides the 5.1 channel surround sound as heard in movie theaters.
COMPONENT VIDEO OUT Jacks: jacks located on the back of the DVD/VCR which are used to send high-quality video to a TV with Component Video In jacks.
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in movie theaters.
DTS: Digital Theater Systems. This is a surround sound system, but it is different from Dolby Digital. The formats were developed by different companies.
Dubbing: copying a video cassette tape using another VCR.
DVD: Digital Video Disc.
Frame: a still picture.
HQ: high quality; a feature in the VCR circuitry which provides enhanced picture detail.
Line Input: The channel to which you set your DVD/VCR during video cassette tape dubbing. If you use the
AUDIO and VIDEO In jacks on the front of the DVD/VCR, select channel 002 (AV FRONT). If you use the
AUDIO and VIDEO IN jacks on the back of the DVD/VCR, select 001 (AV REAR). If you accidentally enter
Line Input mode, press the CHANNEL o/p buttons or use the Number buttons to select another channel.
OPTICAL DIGITAL AUDIO OUT Jack: Converts electrical signals into optical signals before sending the audio to the amplifier. Optical audio is not prone to external electrical influences and has less noise, which reduces adverse effects on external equipment. Be sure to keep the protective cap on the jack when the jack is not being used. This keeps dust out of the jack.
OTR: One-Touch Recording; a timed recording on the VCR that starts immediately and records for 30 minutes to eight hours.
Remote Control: the small unit that came with your DVD/VCR; allows you to operate your DVD/VCR from a distance.
RF coaxial cable: A cable supplied with your DVD/VCR. Use it to connect your DVD/VCR to your TV
(or Cable Box or DBS). The supplied cable is a snap-on type. However, you may use a screw-on type if you prefer.
Special Effects: forward and reverse searching; a still picture; slow motion playback.
S-Video: Produces a clearer picture by sending separate signals for the luminance and the color. If you connect an optional S-Video cable, you will not need to use the supplied yellow video cable.
Tape Speeds: how fast the video cassette tape travels during a recording or playback.
• SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours); best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours).
VCR: video cassette recorder.
VIDEO IN/OUT Jacks: jacks located on the front and back of the DVD/VCR which are used to receive video from another source (IN) or to send video to another system (OUT).
Index 83
ac power cord . . . . . . . . . . . . . . . . .27
accessories . . . . . . . . . . . . . . . . . . . .84
angle button . . . . . . . . . . . . . . . .31, 64 ant-in (antenna in) jack . . . . . .8-14, 27 ant-out (antenna out) jack . . .9-11, 27 arrow buttons . . . . . . . . . . . . . . . . .31
audio button . . . . . . . . . . . . . . .31, 62 audio cd . . . . . . . . . . . . . . . . . . . . . . .6
audio in/out jacks . . .12-13, 27, 40, 46 automatic playback . . . . . . . . . . . . . . . . . . . .45
rewind, eject . . . . . . . . . . . . . . . .45
a-b repeat . . . . . . . . . . . . . . . . . . . .59
a-b repeat button . . . . . . . . . . . .29, 59 batteries . . . . . . . . . . . . . . . . . . . . . .15
bit rate . . . . . . . . . . . . . . . . . . . .68-69 blue background . . . . . . . . . . . . . . .49
camera angle . . . . . . . . . . . . . . . . . .64
cassette compartment . . . . . . . . . . .25
ch3/ch4 switch . . . . . . . . . . . .8-11, 27 channel adding . . . . . . . . . . . . . . . . . . . . . .18
deleting . . . . . . . . . . . . . . . . . . . .18
reviewing . . . . . . . . . . . . . . . . . . .19
selection . . . . . . . . . . . . . . . . . . . .30
setup . . . . . . . . . . . . . . . . . . . .16-17 o
/p buttons . . . . . . . . . .26, 30, 45 chapters . . . . . . . . . . . . . . . . . . . .6, 56 clear button . . . . . . . . . . . . .30, 42, 60 clock setting . . . . . . . . . . . . . . . . . . .20
coaxial jack . . . . . . . . . . . . . .14, 27, 82 component video out jacks .13, 27, 82 connections . . . . . . . . . . . . . . . . .8-14 contents, table of . . . . . . . . . . . . . . . .4
controls dvd/vcr . . . . . . . . . . . . . . . . . . . . .26
remote . . . . . . . . . . . . . . . . . .28-31 copyright protection . . . . . . . . .40, 79 counter only mode . . . . . . . . . . . . .23
cst. in light . . . . . . . . . . . . . . . . . . . .25
daylight-savings time . . . . . . . . . . . .21
display/status/exit button . . .23, 30, 65 display panel . . . . . . . . . . . . . . . .24-25 duplication . . . . . . . . . . . . . . . . . . . .40
dvd button . . . . . . . . . . . . . . . . . . . .28
dvd video . . . . . . . . . . . . . . . . . . . . . .6
dvd/vcr output button . . . . . . . . . . .28
enter button . . . . . . . . . . . . . . . . . .29
ejecting a tape . . . . . . . . . . . . . . . . .79
fast forward . . . . . . . . . . . . . . . .44, 54 front panel . . . . . . . . . . . . . . . . . . . .26
f.fwd button . . . . . . .26, 31, 44, 53, 54 glossary . . . . . . . . . . . . . . . . . . . . . .82
head cleaner . . . . . . . . . . . . . .7, 79-81 helpful hints . . . . . . . . . . . . . . . .76-79 hi-fi stereo sound system . . . . . . . . .48
hookups amplifier with digital in jacks/ md deck/dat deck . . . . . . . . . . . .14
dolby digital decoder/ dts decoder . . . . . . . . . . . . . . . .14
dolby surround compatible amplifier . . . . . . . . . .14
s-video . . . . . . . . . . . . . . . . . . . . .12
stereo . . . . . . . . . . . . . . . . . . . . .13
tv . . . . . . . . . . . . . . . . . . . . . . .8-14 with cable box/dbs . . . . . . . . .10-11 with stereo tv . . . . . . . . . . . . . . .12
without cable box/dbs . . . . . . . .8-9 language (dvd) . . . . . . . . . . . . . . .70-72 language selection (vcr) . . . . . . . . . .22
line input mode . . . . . . . . . .17, 40, 82 long play . . . . . . . . . . . . . . . . . . .38, 82 lp . . . . . . . . . . . . . . . . . . . . . . . .38, 82 memory button . . . . . . . . . . . . .29, 42 menu button . . . . . . . . . . . . . . . . . .29
menus . . . . . . . . . . . . . . . . . . . . .5, 51 mode button . . . . . . . . . . . . .30, 60-61 number buttons . . . . . . . . . . . . . . . .30
on-screen status displays (vcr) . . . . .23
on-screen display (discs) . . . . . . . . .65
one-touch recording . . . . . . . . . . . .35
open/close button . . . . . . . . . . .26, 50 optical jack . . . . . . . . . . . . . .14, 27, 82 output button . . . . . . . . . . . . . . . . .26
parental lock . . . . . . . . . . . . . . . .66-67 password . . . . . . . . . . . . . . . . . . . . .67
pause button . . . . . . . . . .30, 44, 52-53 play button . . . . . . . . . . .26, 31, 32, 50 playing discs . . . . . . . . . . . . . . . . . . .50
playing tapes . . . . . . . . . . . . . . . . . . .32
power button . . . . . . . . . . . . . . . . . .26, 28 cord . . . . . . . . . . . . . . . . . . . . . . .27
light . . . . . . . . . . . . . . . . . . . . . . .25
program (audio cd) . . . . . . . . . . . . .60
random playback . . . . . . . . . . . . . . .61
real-time counter . . . . . . . . . . . . . . .42
rear panel . . . . . . . . . . . . . . . . . . . . .27
record button . . . . . . . .26, 31, 33, 35 record light . . . . . . . . . . . . . . . . . . .25
recording basic . . . . . . . . . . . . . . . . . . . . . . .33
one channel/ watching another . . . . . . . . . . . . .34
prevention . . . . . . . . . . . . . . . . . . .7
timer . . . . . . . . . . . . . . . . . . . .36-39 remote control buttons . . . . . . . . . . . . . . . . . .28-31 sensor . . . . . . . . . . . . . . . . . . . . .26
using . . . . . . . . . . . . . . . . .15, 28, 30 repeat button . . . . . . . . . . . . . . .29, 58 repeat play (tape) . . . . . . . . . . . . . . .41
repeat playback (discs) . . . . . . . . . . .58
rerecording . . . . . . . . . . . . . . . . . . .40
resuming play . . . . . . . . . . . . . . . . . .52
return button . . . . . . . . . . . . . . . . . .28
reverse searching . . . . . . . . . . . .44, 54 rew(ind) button . . . . . . .26, 28, 44, 54 rf coaxial cable . . . . . .9-11, 40, 46, 82 safety precautions . . . . . . . . . . . . . . .3
screen saver . . . . . . . . . . . . . . . .50, 77 search buttons . . . . . . . . . . . . . . . . .26
search mode/time search button
. . . . . . . . . . . . . . . . . .28, 43, 55-57 searching . . . . . . . . . . . . . . . . . .44, 54 second audio broadcast receiving . . . . . . . . . . . . . . . . .46-47 recording . . . . . . . . . . . . . . . .46-47 sensor (remote) . . . . . . . . . . . . . . . .26
settings (dvd) audio . . . . . . . . . . . . . . . . . . . .68-69 language . . . . . . . . . . . . . . . . .70-72 other . . . . . . . . . . . . . . . . . . . . . .74
video . . . . . . . . . . . . . . . . . . . . . .73
setup button . . . . . . . . . . . . .28, 66-74 skip/channel buttons . . . . . . . . .30, 55 slow button . . . . . . . . . . . . . . . . . .30, 44 motion . . . . . . . . . . . . . . . . . .44, 53 slp . . . . . . . . . . . . . . . . . . . . . . .38, 82 sound mode . . . . . . . . . . . . . . . . . . .62
sp . . . . . . . . . . . . . . . . . . . . . . . .38, 82 speed button . . . . . . . . . . . . . . . . . .31
sqpb . . . . . . . . . . . . . . . . . . . . . . . . .32
standard play . . . . . . . . . . . . . . .38, 82 status display (vcr) . . . . . . . . . . . . . .23
stereo broadcast receiving . . . . . . . . . . . . . . . .46-47 recording . . . . . . . . . . . . . . .46-47 hookups . . . . . . . . . . . . . . . . . . .46
stereo TV hookups . . . . . . . . . . . . .12
still picture . . . . . . . . . . . . . . . . .44, 52 stop button . . . . . . . . . . . . . . . . . . .28
stop/eject button . . . . . . . . . . . . . . .26
subtitle button . . . . . . . . . . . . . .29, 63 super high speed searching . . . . . . .44
super long play . . . . . . . . . . . . . .38, 82 s-video out jack . . . . . . . . . . . . .12, 27 table of contents . . . . . . . . . . . . . . . .4
tape duplication . . . . . . . . . . . . . . . . . .40
eject . . . . . . . . . . . . . . . . . . . .26, 45 speed . . . . . . . . . . . . . . . . . . .38, 82 timer recording cancelling . . . . . . . . . . . . . . . . . .39
checking . . . . . . . . . . . . . . . . . . .39
setting . . . . . . . . . . . . . . . . . .36-38 timer set button . . . . . . . . . .26, 29, 38 timer set light . . . . . . . . . . . . . . . . . .25
title button . . . . . . . . . . . . . . . . .28, 51 titles . . . . . . . . . . . . . . . . . . . .6, 51, 56 tracking . . . . . . . . . . . . . . . . . . . . . .45
tracks . . . . . . . . . . . . . . . . . . . . . .6, 55 tv hookups . . . . . . . . . . . . . . . . . .8-14 tv position . . . . . . . . . . . . . .25, 29, 34 vcr position . . . . . . . . . . . . . . . .25, 29 vcr/tv button . . . . . . . . . . . . . . . . . .29
vcr/tv light . . . . . . . . . . . . . . . . . . . .25
video in/out jacks .12, 14, 26-27, 40, 46 warranty . . . . . . . . . . . . . . . . . . .80-81
S
UPPLIED
A
CCESSORIES
The following items are supplied with your DVD/VCR; they are provided to help you use or set up your DVD/VCR.
Remote Control 4835 218 37301
Two AA Batteries 4835 138 17012
Audio and Video Cables
4835 321 17148
RF Coaxial Cable, 75 ohm
4835 323 27011
O
PTIONAL
A
CCESSORIES
The following additional items are not provided with your
DVD/VCR, but they are designed for use with your new DVD/VCR.
To order these optional accessories, contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
VHS Cassette Rewinder
#M61117
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
This owner’s manual is made of recyclable materials.
Remember to recycle!
IB8251E004
Printed In China
0VMN02575 / H9000UD * *
advertisement
Key Features
- Plays both DVDs and VHS tapes
- Progressive scan for enhanced video quality
- Dolby Digital and DTS decoding for surround sound
- 10-bit video DAC for accurate color reproduction
- Parental control for restricting access to certain content
- Multi-language on-screen display for easy navigation
- Remote control for convenient operation
Related manuals
Frequently Answers and Questions
Can I play both DVDs and VHS tapes on this device?
Does it support high-quality video playback?
Can I connect it to my surround sound system?
Is there a way to restrict access to certain content?
advertisement
Table of contents
- 3 Safety and General Information
- 4 Table of Contents
- 5 Introduction
- 6 Playable Discs
- 7 Playable Video Cassette Tapes
- 8 Broadcast System
- 12 Optional Hookups
- 15 Remote Control Setup
- 16 Turning on Your DVD/VCR
- 17 Automatic Channel Setup
- 20 Setting the Clock
- 21 Daylight-Savings Time
- 22 Language Selection (VCR)
- 23 On-Screen Status Displays (VCR)
- 24 DVD/VCR Display - DVD Features
- 25 DVD/VCR Display - VCR Features
- 26 Front Panel
- 27 Rear Panel
- 28 Remote Control Buttons
- 32 Playing a Video Cassette Tape
- 33 Recording on a Video Cassette Tape
- 34 Another
- 35 One-Touch Recording
- 36 Timer Recording
- 40 Rerecording (Tape Duplication)
- 41 Repeat Play (Video Cassette Tapes)
- 42 Real-Time Counter Memory
- 43 Time Search
- 44 Special Effects Playback
- 45 Automatic Operation Features
- 46 MTS System
- 48 Hi-Fi Stereo Sound System
- 49 Blue Background
- 50 Playing a Disc
- 51 Disc Menus
- 52 Pausing Playback
- 53 Step by Step Playback/Slow Motion
- 54 Fast Forward/Reverse Search
- 55 Track Playback
- 56 Title/Chapter Playback
- 57 Specific Time Playback
- 58 Repeat Playback (Discs)
- 59 A-B Repeat Playback
- 60 Programmed Playback
- 61 Random Playback
- 62 Audio Language/Sound Mode
- 63 Subtitle Language
- 64 Camera Angles
- 65 Status Display (Discs)
- 66 Parental Lock Levels
- 67 Parental Lock Password
- 68 Audio Settings
- 70 Language Settings
- 73 Video Settings
- 74 Other Menu Settings
- 76 Helpful Hints
- 80 Limited Warranty
- 82 Glossary
- 83 Index
- 84 Accessories