Subtitle Language. Philips DV900VHS

DVD

The DVD/VCR allows you to select a language for subtitles from those available on the disc.

● Before you begin, place the DVD/VCR in DVD mode.

Press the DVD/VCR OUTPUT button so that the red DVD light appears on the front of the DVD/VCR.

1

Press the DVD button, then press the SUBTITLE button

during playback. The subtitle menu will appear on the TV screen.

2

Within 15 seconds, press the o/p buttons to select a sub-

title language. Select a language from those available on the

DVD.

SUBTITLE 1 : E N G / 8

Press the o/p buttons.

1

2

1

SUBTITLE 2 : F R E / 8

Press the o/p buttons to select another language.

Subtitle 2

Subtitle Language 63

POWER TIMER SET

VCR/TV

DVD/VCR

OUTPUT MEMORY

DVD VCR

PLAY

REW F.FWD

STOP

1

CHANNEL

SKIP

2 3

RECORD

PAUSE

4 5 6

7

SPEED

8

SEARCH MODE

0

DISPLAY

9

+10

CLEAR

SLOW

A B

TIME SEARCH STATUS/EXIT

MENU

REPEAT

TITLE

ENTER RETURN

SETUP MODE AUDIO SUB TITLE ANGLE

SUBTITLE 0 : O F F / 8

To turn off subtitles, press the o/p buttons repeatedly until OFF appears in the subtitle menu.

No subtitles

➜

•••

HELLO

SUBTITLE 1

BONJOUR

SUBTITLE 2

3

The subtitle menu will disappear after about 15 seconds.

Helpful Hints

• With some DVDs, you may select a subtitle language in the Disc menu.

• If the desired language is not shown

after pressing the o/p buttons sev-

eral times, the Disc does not have subtitles in that language.

• The subtitles may be delayed for a few seconds.

• Your subtitle selection will be cancelled if you open the Disc tray or turn off the power. The default setting of the DVD will be selected again.