Sylvania 6509DD TV DVD Combo Owner`s manual

TD001.QX33 03.2.10 11:48 PM Page 1

OWNER’S

MANUAL

9-INCH COLOR TV/DVD

6509DD

As an E

NERGY

S

TAR

Partner, our company has determined that this product meets the E

NERGY

S

TAR

guidelines for energy efficiency. E

NERGY

S

TAR

is a U.S. registered mark.

This Owner’s Manual is made of recycled paper.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-968-3429.

Or visit our WEB SITE at

http://www.funai-corp.com

Please read before using this equipment

TD001.QX33 03.1.31 10:31 PM Page 2

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE

APPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions should be followed.

5.Cleaning-Unplug TV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments-Do not use attachments not recommended by the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD near waterfor example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Do not place this TV/DVD on an unstable cart, stand, tripod, bracket, or table. The TV/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the

TV/DVD. Any mounting of the appliance should follow the manu-

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE facturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

S3126A

Accessoires- Ne placez pas cette TV/DVD sur une table roulante, un support, un trépied, une console ou une table instable. Cette TV/DVD risquerait de tomber, pouvant gravement blesser quelqu'un et l'appareil même pourrait

être sérieusement endommagé. N'utilisez qu'une table roulante, un support, un trépied, une console ou une table recommandé par le fabriquant, ou vendu avec la TV/DVD.

Pour n'importe quelle installation de l'appareil, on devra suivre les instructions du fabriquant et l'on devra utiliser les accessoires d'installation recommandés par le fabriquant.

L'ensemble combiné de l'appareil avec une table roulante devra être déplacé avec précaution. Des arrêts brusques, une force excessive et des surfaces inégales peuvent provoquer le renversement de l'ensemble combiné de l'appareil/table roulante.

9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/DVD and to protect it from overheating, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TV/DVD on a bed, sofa, rug, or other similar surface. This

TV/DVD should never be placed near or over a radiator or heat register. This TV/DVD should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources-This TV/DVD should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/DVDs intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 3

F IGUR E A

EXAMPLE OF ANTENNA GROUNDING AS PER

NA TIONA L ELECT RIC AL CODE

GROUN D

C L A M P

AN TE NN A

L E A D I N

W I R E

A NTEN NA

DI S CHA RG E UN I T

(NEC SE CTI ON 8 10 -2 0)

E L E CT RI C

S E RV I CE

E Q U I P M E N T

S 2 8 9 8 A

NE C - NA TI O NAL EL E CTRI CAL CO DE

G RO UNDI NG CO NDUCT ORS

(NEC SE CTI ON 8 10 -2 1)

G RO UND CL AM PS

P OWE R S E RVI C E G RO UNDI NG

E L E C TR O DE S Y S T E M

(NEC A RT 2 50 , P ART H)

12.Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges.

15.Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD.

18.Servicing-Do not attempt to service this TV/DVD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/DVD.

c. If the TV/DVD has been exposed to rain or water.

d. If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV/DVD to its normal operation.

e. If the TV/DVD has been dropped or damaged in any way.

f. When the TV/DVD exhibits a distinct change in performance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check-Upon completion of any service or repairs to this TV/DVD, ask the service technician to perform routine safety checks to determine that the TV/DVD is in proper operating condition.

22.Heat-This TV/DVD product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 4

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST-

MENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK

MECHANISM.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC

ÉLECTRIQUES, INTRODUIRE LA LAME LA

PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 5

LOCATION

For safe operation and satisfactory performance of your TV/DVD, keep the following in mind when selecting a place for its installation:

•

Shield it from direct sunlight and keep it away from sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

•

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the TV/DVD near strong magnetic fields.

•

Avoid moving TV/DVD to locations where temperature differences are extreme.

SUPPLIED ACCESSORY

• Remote Control Unit

(PART NO.: NE207UD)

• 2 AA Batteries

• Indoor Antenna

(PART NO.:

0EMN00723 or 0EMN01183)

• Matching Adapter

(300ohm-75ohm)

(PART NO.: 1813641 or

1780258 or UCPGANTPK004)

• Car Battery Cord

(PART NO.: WPC0202GA001 or WPC0202HHH001)

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

•

If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•

Do not put your fingers or objects into the

TV/DVD disc loading tray.

•

Do not place anything directly on top of the unit.

WARNING

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. If a DVD is played in a TV/DVD which has moisture, it may damage the DVD and

TV/DVD. Therefore when the condensation occurs inside the unit, turn POWER on and allow at least 2 hours for the unit to dry out.

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings

TV

: Description refers to TV operation (in the TV mode).

DVD-V

: Description refers to playback of DVD video discs

(in the DVD mode).

CD

: Description refers to playback of audio CDs

(in the DVD mode).

MP3

: Description refers to playback of MP3 discs

(in the DVD mode).

QUICK

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 6

TABLE OF CONTENTS

C

IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

C

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C

OPERATING CONTROLS AND FUNCTIONS . . .8

INSTALLING THE BATTERIES . . . . . . . . . . .9

C

PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

INDOOR ANTENNA . . . . . . . . . . . . . . . . . . .10

CONNECTING TO EXTERNAL INPUT JACKS .11

CONNECTING TO A STEREO SYSTEM . . . .12

CONNECTING TO AN AMPLIFIER

EQUIPPED WITH DIGITAL INPUT JACKS,

MD DECK OR DAT DECK (for DVD only) . .12

CONNECTING TO A DOLBY DIGITAL

DECODER (for DVD) . . . . . . . . . . . . . . . . . . .13

TV SECTION

C

SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .14

CHANNEL SET UP FOR THE FIRST TIME . .14

DELETING (OR ADDING) CHANNEL . . . . .14

CHANNEL SET UP AGAIN . . . . . . . . . . . . . .15

SELECTING THE LANGUAGE . . . . . . . . . . .15

C

TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .16

WATCHING A TV PROGRAM . . . . . . . . . . . .16

DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .16

PICTURE CONTROL . . . . . . . . . . . . . . . . . . .16

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .17

DVD SECTION

C

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .18

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .18

DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .18

C

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .19

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .19

GENERAL FEATURES . . . . . . . . . . . . . . . . . .19

DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .19

TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .19

RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

STEP BY STEP PLAYBACK . . . . . . . . . . . . .20

FAST FORWARD/REVERSE SEARCH . . . . .20

SLOW FORWARD / SLOW REVERSE . . . . .20

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

C

SEARCH FUNCTION . . . . . . . . . . . . . . . . . .21

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .21

TITLE / CHAPTER SEARCH . . . . . . . . . . . . .21

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .21

MARKER SETUP SCREEN . . . . . . . . . . . . . .21

C

SPECIAL PLAYBACK FUNCTION . . . . . . . .22

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .22

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .22

C

PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .23

MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .23

TRACK SELECTION . . . . . . . . . . . . . . . . . . .23

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23

C

CHANGING THE SETTINGS . . . . . . . . . . . .24

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .24

AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .24

STEREO SOUND MODE . . . . . . . . . . . . . . . .24

CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .24

BLACK LEVEL SETTING . . . . . . . . . . . . . . .24

VIRTUAL SURROUND . . . . . . . . . . . . . . . . .24

C

THE ON-SCREEN INFORMATION . . . . . . .25

C

CHANGING THE DVD SETUP ITEMS . . . .26

LANGUAGE SETTING . . . . . . . . . . . . . . . . .26

DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .27

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .27

PARENTAL CONTROL . . . . . . . . . . . . . . . . .28

C

TROUBLESHOOTING GUIDE . . . . . . . . . . .29

C

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .31

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .31

C

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .32

C

WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 7

FEATURES

TV Mode

•

181 channel capability PLL frequency synthesizer tuner with direct station call

(A converter may be necessary to view scrambled cable channels.)

•

Infrared remote control

•

Trilingual on screen menu display selectable in

English, Spanish, or French

¡

Sleep Timer

The Sleep Timer function enables you to shut off the power without pressing POWER after a desired time period.

¡

Auto Shut Off Function

If there is no air signal input from the antenna terminal and no operation for 15 minutes, the TV will turn itself off automatically.

DVD Mode

¡

Dolby Digital sound

This player can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.

¡

Still/fast/slow/step playback

Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.

¡

Random playback for audio CD and MP3

This player can shuffle the order of tracks to play them in random order.

¡

Program playback for audio CD and MP3

You can program the order of tracks to play them in any desired order.

¡

DVD menus in a desired language

You can display DVD menus in a desired language, if available on a DVD.

¡

Screen saver/Auto power-off functions

The screen saver program starts when there is no input from the player for five minutes in the stop mode. When the screen saver program is activated for 15 minutes, the power is automatically turned off.

¡

Subtitles in a desired language

You can select a desired language for the display subtitles, if that language is available on a disc.

¡

Selecting a camera angle

You can select the desired camera angle, if a disc contains sequences recorded from different angles.

¡

Choices for audio language and sound mode

You can select the desired audio language and sound mode, if different languages and modes are available on a disc.

¡

Parental lock

You can set the control level to limit playback of discs which may not be suitable for children.

¡

Automatic detection of discs

This player automatically detects if the loaded disc is

DVD, audio CD or MP3 on disc.

¡

On-screen display

Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control.

¡

Search

Chapter search / Title search / Track search / Time search

¡

Repeat

Chapter / Title / Track / Group / All / A-B

¡

Zoom

Magnified screen can be displayed.

¡

Marker

The part designated by user can be called back.

¡

Resume Play

User can resume to playback from the part at which the play was stopped.

¡

Virtual Surround

¡

Bit rate indication

¡

DRC (Dynamic range control)

You can control the range of sound volume.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 8

OPERATING CONTROLS AND FUNCTIONS

TV/DVD FRONT PANEL

[Fig. 1]

TV/DVD REAR VIEW

[Fig. 3]

DC 13.2V

ANT.

VIDEO L AUDIO

R POWER VOLUME CHANNEL STOP

SKIP

PLAY

SKIP

PAUSE OPEN/CLOSE HEADPHONE

SEARCH

L

AUDIO OUT

R

COAXIAL

1 2 3 4 5 6 7 8 9 10111213 14

37 38

39 40 41

REMOTE CONTROL

[Fig. 2]

POWER PICTURE SELECT

OPEN/

CLOSE

4

36

16

12

15

24

25

23

20

21

22

17

9

11

10

1

4

7

SLEEP

8

SKIP

0

2

5

3

6

CH.

9

+100

+10

ZOOM

VOL.

MUTE

REV

PAUSE SLOW

PLAY

STOP

FWD

DISC

MENU

DISPLAY

SETUP TITLE

ENTER

RETURN

CLEAR SEARCH MODE REPEAT A-B

MODE AUDIO SUBTITLE ANGLE

8

33

32

31

30

29

28

27

26

13

34

6

5

35

19

18

1.

Disc loading tray

2.

VIDEO input Jack [page 11]

Connect to the video output jack of a video camera or VCR.

3.

AUDIO L/R input Jacks [page 11]

Connect to the audio output jacks of a video camera or VCR.

4.

POWER Button [page 14]

Press to turn the power on and off.

5.

VOLUME K/L (VOL. m/n) Buttons

Press to control the volume level for the DVD and TV.

6.

CHANNEL K/L (CH.K/L) Buttons [page 14]

Press to select memorized channel.

Press to change to TV mode when DVD mode.

7.

Remote Sensor Window

8.

STOP Button [page 19]

Stops operation of the disc.

9.

SKIP H Button [page 21]

Plays back from the beginning of the current chapter or track.

SEARCH (REV) E Button (Front Panel)

[page 20]

During playback or in the pause mode, press and hold button down for a few seconds to change reverse playback speed.

10.

PLAY Button [page 19]

Starts playback of the disc contents.

Press to change to DVD mode when TV mode.

11.

SKIP G Button [page 21]

Plays back from the beginning of the next chapter or track.

SEARCH (FWD) D Button (Front Panel)

[page 20]

During playback or in the pause mode, press and hold button down for a few seconds to change forward playback speed.

12.

PAUSE Button [page 20]

Pauses the current disc operation.

13.

OPEN/CLOSE Button [page 19]

Press to insert discs into or remove them from the tray.

14.

HEADPHONE Jack

To connect headphone (not supplied) for personal listening.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 9

15.

MODE Button [pages 22-24]

Activates program playback or random playback mode when playing CDs or MP3.

16.

Number Button

TV Mode: [page 14]

Press two digits to directly access the desired channel.

Remember to press a "0" before a single digit channel.

+100 Button–

Press to select cable channels which are equal or greater than number 100.

DVD Mode: [page 21]

Press to enter the desired number.

+10 Button–

Press to enter the desired numbers which are equal or greater than number 10.

17.

SLEEP Button [page 17]

Press SLEEP to display the sleep timer and start the function. The shut off time can be determined by the number of times you press this button. (0,

30, 60, 90, or 120 minutes)

18.

REV h Button [page 20]

Press to view the DVD picture in fast reverse motion. Press PAUSE, then press this button to begin slow motion playback. Press this button repeatedly to change the reverse speed of slow motion.

FWD g Button [page 20]

Press to fast forward the Disc. Press PAUSE, then press this button to begin slow motion playback.

Press this button repeatedly to change the forward speed of slow motion.

19.

ZOOM Button [page 20]

Expands the picture to fill the entire screen.

20.

SETUP Button [pages 14, 26-28]

Press to enter or exit the TV menu or DVD setup mode.

21.

TITLE Button [page 19]

Displays the title menu.

22.

CLEAR Button [pages 21-23]

Resets a setting.

23.

DISPLAY Button

TV Mode:

Press to display the channel number on the screen. If you press it again, the channel number will disappear.


Displays the current status on the TV screen for checking purposes.

24.

SEARCH MODE Button [page 21]

Press to locate a desired point.

25.

AUDIO Button [page 24]

Press to select a desired audio language or sound mode.

26.

SUBTITLE Button [page 24]

Press to select a desired subtitle language.

27.

REPEAT Button [page 22]

Repeats playback of the current disc, title, chapter or track.

28.

ANGLE Button [page 24]

Press to change the camera angle to see the sequence being played back from a different angle.

29.

REPEAT A-B [page 22]

Repeats playback of a selected section.

30.

RETURN Button [page 24]

Returns to the previous operation.

31.

ENTER Button [pages 14, 19]

Press to accept a setting.

32.

Arrow Buttons

TV Mode: [page 14]

Press to select a setting mode from the menu on the TV screen.

Press to select or adjust from a particular menu.


Use when making settings while watching the display on a TV screen.

33.

DISC MENU Button [page 19]

Displays the menus in the DVD.

34.

SELECT Button [pages 11, 19]

Press to change to TV mode, external input mode or DVD mode.

NOTE:

When you select the DVD mode by this button, press PLAY or OPEN/CLOSE first.

Otherwise, the DVD features are not operated.

35.

MUTE Button

Press MUTE to turn off the sound portion of the TV program. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press

MUTE again or press VOL. m or n to restore sound.

36.

PICTURE Button [page 16]

Press to enter picture adjustment mode.

37.

Power cord

Connect to a standard AC outlet (120V/60Hz).

NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet.

38.

AUDIO L/R output Jack

Connect to the analog audio input of an external amplifier or decoder.

39.

COAXIAL digital audio out Jack (DVD Audio

Only)

Connect to the digital input of an external amplifier or decoder.

40.

ANT. in Jack

Connect to an antenna, cable system, or satellite system.

41.

DC 13.2V Jack

Connect to the Car Battery Cord.

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

NOTES

¡ Do not mix alkaline and manganese batteries.

¡ Do not mix old and new batteries.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 10

Satellite Box or

Cable Box

OUT

(Not supplied)

IN

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

From Cable System or

Satellite Dish

VHF/UHF Antenna

(Not supplied)

VHF Antenna

(Not supplied)

From

Cable System

DC 13.2V

UHF Antenna

(Not supplied)

ANT.

L

AUDIO OUT

R

COAXIAL or

VHF/UHF

Combiner

(Not supplied)

ANT.

75-ohm Coaxial

Cable (Not supplied) or

Flat twin-lead cable

[Fig. 4]

or

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

NOTE:

Before plugging the an antenna into the ANT. IN jack of the TV/DVD, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into the ANT. IN jack of the TV/DVD.

VHF/UHF COMBINED ANTENNA

A VHF UHF 75 ohm combination antenna can be connected to ANT terminal.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/DVD without a converter box.

Use the TV/ DVD Remote Control to select channels.

Bent pin

Cable

Plug

(Needs to be straightened)(Straight pin)

CABLE WITH CONVERTER/DESCRAM-

BLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.

Channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/ DVD Remote Control.

TO VIEW A SCRAMBLED/UNSCRAMBLED

CHANNEL

1. Set the TV/DVD channel selector to the output channel of the Cable Converter Box or Satellite

Box. (Ex. CH3)

2.Select the channel to view at your Cable Converter

Box or Satellite Box.

INDOOR ANTENNA

The Indoor Antenna (supplied) is detachable. Insert the stem of the antenna into the hole on the upper-back portion of the TV/DVD. Connect the Indoor Antenna to the

TV/DVD as shown in the diagram. For the best reception, fully extend the Indoor

Antenna and make the necessary adjustments. (Avoid touching the top section when adjusting.)

NOTE:

The connection of an Indoor antenna may not always give acceptable TV reception.

Indoor Antenna

(Supplied)

Flat twin-lead cable

Matching

Adapter

(Supplied)

DC 13.2V

AUDIO OUT

COAXIAL

ANT.

ANT.

[Fig. 5]

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 11

CONNECTING TO EXTERNAL INPUT JACKS

When you watch a program recorded on an another source (VCR or video camera), use the audio/video input jacks on the front of the TV/DVD.

Connect the audio/video output jacks of another source to the

AUDIO L/R and VIDEO jacks of this TV/DVD. Then press SELECT until "AUX" appears on the screen.

AUX

NOTE:

•

When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the monaural VCR (another source) to the

AUDIO L jack of this TV/DVD. The audio will output in both L and R channel equally.

[Another source] To the audio output jacks

To the video output jack

etc.

MOBILE CONNECTION

Audio/Video cables

(not supplied)

[Front of the TV/DVD]

VIDEO

VIDEO L AUDIO R POWER

L AUDIO R

[Fig. 6]

WARNING: The driver should never watch the TV/DVD while operating a motor vehicle.

CAUTION:

•

When used in moving vehicle, be sure that the unit is secure at all the times to prevent injury.

Consult a professional installer.

•

If you use the TV/DVD with the vehicle’s engine off, recharge the vehicle’s battery after about every 4 hours of use to prevent it from running down. After you finish using the TV/DVD be sure you unplug the car-battery cord from the cigarette-lighter socket.

•

Do not use this TV/DVD while driving.

•

Do not leave this TV/DVD in a car.

•

This TV/DVD is not designed for use in a car.

1) The supplied indoor antenna is adequate when your vehicle is stationary. For best reception on the road, use a high-quality VHF/UHF mobile TV antenna.

2) Attach the car battery cord to the DC13.2V(12V) connector on the back of the TV/DVD. Then, connect the other end to your vehicle’s cigarettelighter socket.

To the vehicle's cigarette-lighter socket

VHF/UHF Combination

Mobile Antenna

(Not supplied)

NOTES:

•

Be sure your vehicle has a 13.2-volt (12-volt), negative-ground electrical system.

•

Be sure you use only the supplied car battery cord.

Using another cord could damage the TV/DVD.

•

Be sure the socket is free of ashes and other debris.

•

Be sure to push the car battery cord’s plug completely into the cigarette-lighter socket.

•

Always unplug the car battery from the cigarettelighter socket before you unplug it from the

TV/DVD.

•

You must disconnect the car battery cord from the

TV/DVD before you can use the AC power.

•

Be sure to replace the fuse with only the same type,

6A, 250V.

Car battery cord

(Supplied)

ANT.

DC 13.2V

AUDIO OUT

R

COAXIAL

ANT.

DC13.2V

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 12

Stereo system

CONNECTING TO A STEREO SYSTEM

DC 13.2V

L

AUDIO OUT

R

COAXIAL

L

AUDIO OUT

R

COAXIAL

ANT.

To ANALOG AUDIO INPUT jacks

To Right (red) and Left (white)

AUDIO OUT jacks

[Fig. 7]

NOTES:

•

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the

TV/DVD.

•

The monaural sound is output from the stereo system when the TV/DVD is in the TV mode.

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD only)

Use an audio coaxial digital cable available at retail for the audio connections.

Amplifier equipped with digital input jacks, MD deck,

DAT deck, etc.

To COAXIAL DIGITAL

AUDIO INPUT jack

DC 13.2V

L

AUDIO OUT

R

COAXIAL

L

AUDIO OUT

R

COAXIAL

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

(only DVD AUDIO OUT)

ANT.

[Fig. 8]

NOTES:

•

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•


•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (See page 27 to set DOLBY

DIGITAL to OFF.)

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 13

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail for the audio connections.

Front speaker

(left)

Center speaker

Front speaker

(right)

Surround speaker

(left)

Dolby Digital decoder

Surround speaker

(right)

To COAXIAL DIGITAL

AUDIO INPUT jack

Subwoofer

L

AUDIO OUT

R

COAXIAL

To DIGITAL AUDIO OUT

(PCM/BITSTREAM)

COAXIAL jack

DC 13.2V

L

AUDIO OUT

R

COAXIAL

ANT.

[Fig. 9]

NOTES:

•


•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.

(See page 27 to set DOLBY DIGITAL to ON.)

•

Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 14

TV SECTION

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

TV

1

Plug in the TV/DVD power cord

Plug the TV/DVD power cord into a standard AC outlet.

NOTE:

•

If some digits appear in the corner of the screen, press POWER without unplugging the power cord.

2

Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

DELETING (OR ADDING)

CHANNEL

TV

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

- TV SETUP -

1

Select “CHANNEL SET UP”

Press SETUP on the remote control.

Press K or L to point to “CHAN-

NEL SET UP”.

Then, press ENTER.

B CHANNEL SET UP

LANGUAGE [ENGLISH]

3

Select the On Screen

– SET UP –

Language

Press K or L to point to “LAN-

GUAGE”.

B LANGUAGE

[ENGLISH] ESP

AUTO PRESET

FRA

Then, press ENTER to select

“ENGLISH” or “ESP”=Spanish or

“FRA” =French. “[ ]” indicate the selected language.

2

Select “ADD/DELETE CH”

Press K or L to point to

“ADD/DELETE CH”.

Then, press ENTER.

– CHANNEL SET UP –

B

ADD / DELETE CH (TV)

AUTO PRESET

3

Enter the desired channel number

Press K or L until your desired channel number appears. (You can also use Number or CH. K/L to enter it.) (Example: CH8)

ADD / DELETE

08

4

Begin auto preset

Press K or L to point to “AUTO

PRESET”. Then, press ENTER.

The tuner scans and memorizes all active channels in your area.

– SET UP –

LANGUAGE

[ENGLISH] ESP

B AUTO PRESET

FRA

NOTES:

•

The TV/DVD distinguishes between standard TV channels and cable(CATV) channels.

•

The TV/DVD may memorize TV channels as

CATV channels if reception conditions is poor. If this happens, try AUTO PRESET action again when reception conditions are better. See “CHAN-

NEL SET UP AGAIN” on page 15.

5

After scanning

The tuner stops on the lowest memorized channel.

If you want to recall the selected channels, you can select the desired channel directly with Number or

CHANNEL(CH.) K or L.

4

Delete (or add) it from (into) memory

Press ENTER. The channel number changes to light red. The channel is deleted from memory.

Added channel: Light blue.

Deleted channel: Light red.

•

To delete another channel, repeat steps [3] and [4].

•

If you press ENTER again, the channel is memorized again.

5

Exit the channel setup mode

Press SETUP on the remote control to returns to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press CHANNEL(CH.) K or L.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 15

CHANNEL SET UP AGAIN

TV

1

Select “CHANNEL SET UP”


Press K or L to point to “CHAN-

NEL SET UP”.

Then, press ENTER.

- TV SETUP -

B

CHANNEL SET UP

LANGUAGE [ENGLISH]

2

Begin auto preset

Press K or L to point to “AUTO

PRESET”. Then, press ENTER.

The tuner scans and memorizes all the active channels in your area.

– CHANNEL SET UP –

ADD / DELETE CH (TV)

B

AUTO PRESET

NOTES:

•

The TV/DVD distinguishes between standard TV channels and cable(CATV) channels.

•

The TV/DVD may memorize TV channels as

CATV channels if reception conditions is poor. If this happens, try AUTO PRESET action again when reception conditions are better.

3

After scanning

The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE

TV

NOTE: This function effects only the language on the screen menu and not the audio source.

1

Select “LANGUAGE”


Press K or L to point to “LAN-

GUAGE”.

Then, press ENTER to select

“ENGLISH” or “ESPAÑOL”=

Spanish or “FRANÇAIS”= French.

- TV SETUP -

CHANNEL SET UP

B

LANGUAGE [ENGLISH]

2

Exit the Language mode

Press SETUP on the remote control to return to TV mode.

NOTE: If Spanish or French is selected accidentally,

1) Press SETUP on the remote control.

2) Press K or L to point to “IDIOMA [ESPAÑOL]” or “LANGAGE” [FRANÇAIS].

3) Press ENTER to select your desired language.

4) Press SETUP to exit.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 16

TV OPERATION

WATCHING A TV PROGRAM

1

Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

TV

2

Select the channel number

Press CHANNEL(CH.) K or L to select your desired channel number or press Number on the remote control.

Note for using the Number on the remote control:

¡ When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press

“+100” then press “2” and “5”).

¡ You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

Remember:

¡

If the TV/DVD is connected to a cable box or satellite box, the TV/DVD must be on CH3 or

CH4, then the channel to be viewed must be selected on the cable box or satellite box.

3

Adjust sound

Press VOLUME(VOL.)

X Y to adjust the volume.

VOLUME 20

C C C C C C

C C C C C C C C C C

NOTE:

•

If you press the CHANNEL(CH.) o or p in the

DVD mode, you can change the TV channels.

Even if you turn off the TV/DVD in the DVD mode, when you turn it on again, it will go into the

TV mode.

PICTURE CONTROL

TV

The TV/DVD’s picture controls – BRIGHT, CON-

TRAST, COLOR, TINT and SHARPNESS – are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image.

Make sure ...

•

TV/DVD power must be turned on.

1

Select “PICTURE CONTROL”

Press PICTURE on the remote control.

2

Select item you want to adjust

Press K or L until desired control is displayed.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

3

Adjust the picture control

BRIGHT

Press B or s to adjust to your desired level within

5 seconds.

NOTE:

•

At step 3, the picture adjustment display will disappear from the TV screen after about 5 seconds unless you press any buttons, even though you may not be finished. In this case, repeat from step [1].

+

DEGAUSSING

Magnetism from nearby appliances and speakers might affect the color of the TV picture.

If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power cord from AC outlet then reconnect it after 30 minutes.

s

BRIGHT

to decrease brightness

CONTRAST

to decrease contrast

COLOR

to pale

TINT

to purple

SHARPNESS

to soft

B to increase brightness to increase contrast to brilliant to green to clear

•

If there is a power failure of any kind, the unit will retain its memory for this feature.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 17

SLEEP TIMER

TV

The Sleep Timer function enables you to shut off the power without pressing POWER after a desired time period.

1

Set “SLEEP TIMER”

Press SLEEP on the remote control.

You may change the sleep time with pressing SLEEP on the remote control repeatedly. The timer is set up to 120 minutes, 30 minutes each time SLEEP is pressed.

SLEEP 120 MINUTE

To cancel the sleep timer:

Press SLEEP repeatedly until "SLEEP 0 MINUTE" is displayed.

NOTES:

•

When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

•

To view the time left for sleep timer press SLEEP once when SLEEP display disappears. After 10 seconds, display will disappear again.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 18

DVD SECTION

ABOUT THE DISCS

PLAYABLE DISCS DISC TYPES

The following discs can be played back on this TV/DVD.

¡

DVD video

¡

DVD-R/RW*

¡

DVD+R/RW*

¡

Audio CD

¡

CD-R/RW*

¡

MP3*

* Depending on the types or the writing method of the medium some discs can not be played.

• Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs made on personal computers, or on DVD recorders may not be played back properly due to the factors such as scratches, dirt or special properties of the disc.

• Discs made on personal computers may not be played back properly due to the different environment or the settings of the application you use. We recommend always to use the standardized, rightly formatted discs.

(Please contact the sales agency for more detail).

[DVD]

Data on a DVD is divided into sections called "titles", and then into subsections called "chapters", each of which is given a title or chapter number. Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If a function you selected does not run as desired, refer to the manual accompanying the disc.

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2

This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as

PAL or SECAM.

¡ Some discs include region codes as shown below.

[AUDIO CD]

Data on an audio CD is divided into sections called

“tracks”, each of which is given a track number.

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

¡

The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on TV/DVD with the same region code.

The following discs cannot be played back on this

TV/DVD.

¡

DVD with region codes other than 1 or ALL.

¡

DVD-ROM

¡

DVD-RAM (Never play back, otherwise malfunction may result.)

¡

CD-ROM

¡

VSD

¡

CDV (Only plays back the audio part.)

¡

CD-G (Only plays back the sound.)

¡

CD-I (Never play back, otherwise malfunction may result.)

¡

SACD

¡

Photo CD (Never play back, otherwise malfunction may result.)

¡

Video CD (Never play back, otherwise malfunction may result.)

Any other discs without compatibility indications.

[MP3]

Data on an MP3 is divided into sections called "groups", and then into subsections called "tracks", each of which is given a group or track number.

Example

Group 1

Track 1 Track 2 Track 3 Track 4

Group 2

Track 1 Track 2

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 19

PLAYING A DISC

BASIC PLAYBACK

DVD-V CD

Getting started

¡ Turn on the power of amplifier and any other components, if necessary.

1

Press POWER.

¡ The power will turn on.

2

Press OPEN/CLOSE to open disc loading tray.

3

Place the chosen disc in the tray, with the label facing up.

GENERAL FEATURES

DVD may contain menus to navigate the disc and access special features. Press appropriate numerical key or use Arrow (L/K/B/s) to highlight your selection in the DVD main menu and press ENTER to confirm.

NOTES

¡ Select DVD mode by pressing SELECT on the remote control. Then, press PLAY or OPEN/CLOSE before you operate the DVD functions.

¡ Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen.

DISC MENU

DVD-V

1

Press DISC MENU.

¡ The DVD main menu will appear.

4

Press PLAY.

¡

The tray will close automatically, and playback will then start from the first chapter or track of the disc.

If the playback does not start automatically, press

PLAY.

¡

When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to “TITLE MENU”.

2

If the feature is not available, may appear on the TV screen.

symbol

3

If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection.

4

Press Arrow (L/K/B/s) to select an item,

and ENTER to confirm selection.

5

Press STOP to stop playback.

TITLE MENU

NOTES

¡

When the DVD mode has been switched to the TV mode, the DVD mode shuts down first and then TV picture and sound appears in about 4 seconds.

Similarly, when POWER is pressed to turn off in the

DVD mode, this mode shuts down first and then the

TV/DVD’s power is turned off.

¡

A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.

¡ With DVDs that use titles for playback program signals, playback may start from the second title, or it may skip these titles.

¡

During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

1

Press TITLE.

¡

The title menu will appear.

2

If the feature is not available, may appear on the TV screen.

3

Press Arrow (L/K/B/s) to select an item,

and ENTER to confirm selection.

CALLING UP A MENU SCREEN

DVD-V symbol

DURING PLAYBACK

For DVD-Vs

¡ Press DISC MENU to call up the DVD menu.

¡

Press TITLE to call up the title menu.

NOTE

¡

Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 20

RESUME

SLOW FORWARD /

SLOW REVERSE

DVD-V CD

DVD-V

1

During playback, press STOP.

¡

Resume message will appear on the TV screen.

2

Press PLAY, playback will resume from the point at which playback was stopped.

¡ To cancel resume, press STOP twice.

¡ If turn off the TV/DVD, resume function will be cancelled.

1

PAUSE

DVD-V

During playback, press PAUSE.

¡ Playback will pause and sound will be muted.

2

To continue playback, press PLAY.

CD

1


2

Press FWD

g

or REV

h

.

3

Press FWD

g

or REV

h

repeatedly to select the required speed: 1/16, 1/8, 1/2 of the normal playback.

4

To return to normal playback, press PLAY.

Note for using buttons on the main unit:

Press PAUSE, then, press and hold down the SKIP G /

SEARCHg or SKIPH /SEARCHh on the

TV/DVD for a few seconds to begin Search in 1/16 speed of the normal playback. Press and hold down again to change speed to 1/8. Repeat this procedure to change to 1/2.

ZOOM

STEP BY STEP PLAYBACK

DVD-V

DVD-V

1


¡

Playback will pause and sound will be muted.

The Zoom function allows you to enlarge the video image and to pan through the enlarged image.

2

The disc goes forward by one frame each time PAUSE is pressed.

3

To exit step by step playback, press PLAY.

1

Press ZOOM during playback.

¡ Playback will continue.

2

Press ZOOM repeatedly to select the required zoom factor: ZOOM1, ZOOM2,

ZOOM3, or OFF.

FAST FORWARD/REVERSE

SEARCH

DVD-V CD MP3

1

During playback, press FWD

g

or REV

h

repeatedly to select the required forward or

¡

reverse speed: x2, x8, x50, x100.

For audio CDs, the speed is fixed at

×16.

¡ For MP3, the speed is fixed at

×8.

3

Use the Arrow (

K / L / s / B

) to move the zoomed picture across the screen.

4

To exit zoom mode, press ZOOM to OFF.

NOTES

¡

Zooming function does not work while disc menu is shown.

¡

Zooming function is not available on some discs.

2

To return to normal playback, press PLAY.

Note for using buttons on the main unit:

During playback, press and hold down the SKIP G /

SEARCHg or SKIPH /SEARCHh on the

TV/DVD for a few seconds to begin Search in x2 speed. Press and hold down again to change speed to x8. Repeat this procedure to change to x50 and x100.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 21

SEARCH FUNCTION

TRACK SEARCH

CD

TIME SEARCH

DVD-V CD

There are three ways to begin playback on an Audio

CD at a specific Track.

Using Number on the remote control

1

Press Number to enter the desired Track number.

¡ Playback will start at the selected track.

¡ For single digit tracks (1-9), press a single number

(eg. track 3, press 3).

¡ To play track 26, press +10, 2, 6.

1

During playback, press SEARCH MODE three times (CD: twice) to display the Time

Search on the TV screen.

2

Within 30 seconds, enter a desired disc time using Number on the remote control.

¡ Playback will start at the specified time.

¡ Press CLEAR to erase the incorrect input.

MARKER SETUP SCREEN

Using SEARCH MODE

1

Press SEARCH MODE.

¡ The track search display appears.

2

Within 30 seconds, select a desired track number using Number on the remote control.

¡ For single digits press 0 first.

¡ Playback will start at the selected track.

DVD-V CD

Use markers to memorise your favorite places on a disc.

1

Press SEARCH MODE four times (CD: three times) during playback.

¡

The display screen and Markers will appear on the

TV screen.

Using SKIP

H G

During playback, press SKIP G to move the next track. Press it repeatedly to skip subsequent tracks.

Press SKIP H to go back to beginning of the current track. Press it repeatedly to go to the previous tracks.

¡ If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track.

NOTE

¡ SKIP H G are not available when playback is stopped.

TITLE / CHAPTER SEARCH

DVD-V

1

Press SEARCH MODE once for the Chapter search, twice for the Title search during playback.

/2

2

Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,

7, 8, 9, or 10 and ensure that “- : - - : - -” appears in the display.

3

When reaches the desired point, press

ENTER.

¡

The Title or Track and elapsed playing time will appear in the TV screen.

4

To return to the Marker later, press SEARCH

MODE four times (CD: three times) during

playback and Arrow (s/ B) to choose the

desired marker, then press ENTER.

NOTES

¡

Opening the disc tray or turning off the power or select AC at step 2 and press ENTER will erase all

Markers.

¡ To clear a marker, using Arrow (s/ B), position the cursor on to the marker number to be cleared and press CLEAR.

¡

You can mark up to 10 points.

5

Press SEARCH MODE or RETURN to exit.

2

Enter the desired chapter/title number using

Number on the remote control.

¡ Playback will start at the selected Chapter or Track.

¡ Press CLEAR to erase the incorrect input.

¡ For single digits press 0 first.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 22

SPECIAL PLAYBACK FUNCTION

REPEAT

REPEAT is available only during playback.

REPEAT TITLE / CHAPTER

DVD-V

PROGRAM

CD

You may determine the order in which tracks will play.

To activate the repeat function, press REPEAT during playback.

¡

The repeat mode changes as described below every time you press the button.

CHAPTER TITLE

(current chapter repeat) (current title repeat)

OFF

(repeat off)

1

In stop mode, press MODE.

¡ The PROGRAM screen will appear.

2

Press

▲ or ▼ to select a track, then press

ENTER.

¡ Press CLEAR to erase the most recently entered program.

TOTAL

NOTES

¡

Repeat Title/Chapter is not available with some scenes.

¡

The REPEAT setting will be cleared when moving to other title or chapter.

REPEAT TRACK

CD

To activate the repeat function, press REPEAT during playback.

¡

The repeat mode changes as described below every time you press the button.

TRACK

(current track repeat)

ALL

(entire disc repeat)

OFF

(repeat off)

NOTES

¡

Repeat setting will be cleared when moving to other track.

¡

Repeat playback does not function during repeat A-

B playback.

REPEAT A-B

DVD-V CD

3

Repeat step 2 until you have selected all the tracks you want to play in the program.

4

Press PLAY to play the programmed tracks.

NOTES

¡ While the program is being played back, the STOP works as follows.

¡ Press STOP once and then PLAY again, playback will restart from the point where STOP was pressed.

(Program continued)

¡ Press STOP twice and then PLAY again, playback will restart from the track in the usual way. (Program cleared)

¡ Up to 99 programs can be entered.

¡ If you like to repeat the current track in the program, press REPEAT repeatedly until TRACK appears during playback. If you like to repeat the entire program press REPEAT repeatedly until ALL appears during playback.

RANDOM PLAYBACK

CD

¡

1

Press REPEAT A-B at your chosen starting point.

A- appears briefly on the TV screen.

This shuffles the playing order of tracks instead of playback in the sequence.

2

Press REPEAT A-B again at your chosen

¡

end point.

A-B appears briefly on the TV screen, and the repeat sequence begins.

3

To exit the sequence, press REPEAT A-B.

NOTES

¡ The repeat A-B section can only be set within the current title (for DVDs), or current track (for audio CDs).

¡ Repeat A-B is not available with some scenes in DVD.

¡ To cancel the A point which was set, press CLEAR.

¡ Repeat A-B playback does not function during title, chapter, track or all repeat playback.

1

In stop mode, press MODE twice.

¡ RANDOM screen appears.

RANDOM

CD [AUDIO] TOTAL 0:45:55

PLAY

RANDOM PROGRAM

- - no indication - -

2

Press PLAY to start random playback.

NOTE

¡ If you like to repeat the current track in the random selection, press REPEAT repeatedly until

TRACK appears during playback. If you like to repeat the entire random selection press REPEAT repeatedly until ALL appears during playback.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 23

PLAYING A MP3 DISC

MP3 PLAYBACK TRACK SELECTION

MP3 MP3

When a CD with MP3 files is in the TV/DVD, the

MP3 menu will appear on the TV screen in stop mode.

1

Press SEARCH MODE during playback.

¡ The FILE LIST will appear.

1

In stop mode, press Arrow (

K

/

L

) to select the desired group track.

¡ If a group is selected, press

B or ENTER to go on to the track selection screen. Press

Arrow (

K

/

L

) to choose a track, then press ENTER.

¡ If a track is selected, press

ENTER to start playing tracks. Starting from the one you’ve just chosen the subsequent tracks will be played.

¡ Choose FIRST PLAY to start playback from the beginning of the listed tracks.

¡ Press TITLE to return to the first item.

2

Select a desired track using Arrow

(

K / L /s/B

).

¡ Press

B when you want to go to the next hierarchy.

¡ Press s when you want to go back to the previous hierarchy.

3

Press PLAY to start playback.

NOTES

¡ Press SEARCH MODE to exit.

¡ Some selections may take a while to be recognized.

PROGRAM

2

Press STOP to stop playback.

NOTES

¡ Folders are known as Groups; files are known as

Tracks.

¡ MP3 files are accompanied by

3 icon.

¡ Maximum of 255 folders can be recognized.

¡ Maximum of 256 files can be recognized.

¡ Up to 8 hierarchies can be created.

This player recommends the use of files recorded at the below specifications:

¡ Sampling frequency: 44.1kHz or 48kHz

¡ Constant bit rate: 112kbps ~ 320kbps.

This feature allows you to program an MP3 disc to play in a desired sequence.

1

In stop mode, press MODE.

¡ The PROGRAM screen will appear.

2

Select a desired track using Arrow

MP3

(

K / L /s/B

). Then, press ENTER.

¡

Press

B when you want to go to the next hierarchy.

¡ Press s when you want to go back to the previous hierarchy.

¡ Press CLEAR to erase the most recently entered program.

3

Repeat step 2 until you have selected all the

Tracks you want to play in the program.

4

Press PLAY to start programmed playback.

RANDOM PLAYBACK

1

In stop mode, press MODE twice.

¡ RANDOM screen appears.

2

Press PLAY to start random playback.

MP3

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 24

CHANGING THE SETTINGS

SUBTITLE LANGUAGE

DVD-V

CAMERA ANGLE

DVD-V

The DVD allows you to select a language for subtitles during DVD disc (if available) playback.

1

Press SUBTITLE during playback.

2

Press SUBTITLE repeatedly to select your desired subtitle language.

¡ The subtitle language will be displayed on the display bar at the top of the screen.

Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen.

1

Press ANGLE during playback.

¡ The selected angle will be displayed on the display bar at the top of the screen.

2

Press ANGLE repeatedly to select your desired angle.

3

To turn off subtitles, press SUBTITLE repeatedly until OFF appears.

NOTES

¡ Some discs allow audio language setting/subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

¡ If the desired language is not shown after pressing

SUBTITLE several times, the disc does not have subtitles in that language.

¡ If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other languages, ‘---’ will be displayed instead.

(Refer to page 26.)

AUDIO LANGUAGE

BLACK LEVEL SETTING

Adjust the Black Level Settings to make the black parts of the picture brighter.

1

Press MODE during playback.

ON

DVD-V

DVD-V

2

Press ENTER to switch ON/OFF.

ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

The TV/DVD allows you to select a language during

DVD disc (if multi language available) playback.

3

Press MODE twice or RETURN to exit.

1

Press AUDIO during playback.

2

Press AUDIO repeatedly to select your desired language.

NOTE

¡ Pressing AUDIO may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu).

STEREO SOUND MODE

VIRTUAL SURROUND

DVD-V CD MP3

You can enjoy stereophonic visual space on your existing stereo system.

1

Press MODE twice (CD/MP3: once) during playback.

OFF

CD

1

Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH.

¡

STEREO - both right and left channels are active

(stereo)

L-CH - only left channel is active

R-CH - only right channel is active

NOTE

¡ If the Virtual Surround setting is ON, the sound mode will be fixed to STEREO, and can not be changed.

2

Press ENTER to set it 1 (Natural effect) or 2

(Emphasized effect) or OFF.

3

Press MODE or RETURN to exit.

NOTE (for CD play only)

¡

Virtual Surround will not be effective if the sound mode is set to something other than STEREO.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 25

THE ON-SCREEN INFORMATION

DVD-V CD MP3

You can check the information about the current disc by pressing DISPLAY on the remote control.

For DVD-Vs

1

Press DISPLAY during playback to show current Chapter.

¡ The elapsed and remaining playing time of the current chapter will be displayed.

9/49 0:00:00 -0:00:00

For audio CDs

1

Press DISPLAY during playback to show the current Track.

¡ The elapsed and remaining playing time of the current track will be displayed.

2

Press DISPLAY again to show current Title.

¡

The elapsed and remaining playing time of the current title will be displayed.

2

Press DISPLAY again to show current Total

Track.

¡ The elapsed and remaining playing time of the current total track will be displayed.

3

Press DISPLAY again.

¡

The BIT RATE and the current repeat setting will be displayed.

¡

If you are playing a dual layered disc, the layer number will also be displayed (L0: Layer 0 is playing.

L1: Layer 1 is playing).

4

Press DISPLAY again to exit the display.

3


For MP3

1

Press DISPLAY during playback.

¡

The name of the file currently in play will be displayed.

2

Press DISPLAY again to show the track number, the repeat status, and the playback status at the top of the screen.

¡ will be displayed when repeat play has been selected.

T - indicates Track repeat

G - indicates Group (folder) repeat

A - indicates Disc repeat

3


EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 26

CHANGING THE DVD SETUP ITEMS

LANGUAGE SETTING

DVD-V

Language options are not available with some discs.

1

Press SETUP twice in STOP mode so that the DVD SETUP menu appears.

¡ If the menu does not appear, press PLAY, STOP, then SETUP twice.

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

ON

2

Press B to select CUSTOM, then press

ENTER.

¡ CUSTOM mode will appear.

3

Press Arrow (s/ B) to select LANGUAGE,

then press ENTER to confirm.

LANGUAGE

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

4

Press Arrow (

K / L

) to select the next items, then press ENTER.

AUDIO:

¡

Sets the audio language.

SUBTITLE:

¡

Sets the subtitle language.

DISC MENU:

¡

Sets the language for DVD menu.

5

Press Arrow (

K / L

) to select a setting, then press ENTER.

¡ If OTHER is selected on the AUDIO, SUBTITLE or

DISC MENU screen, press four-digit number to enter the code for the desired language. (Refer to the language code list below.)

¡ Only the languages supported by the disc can be selected.

6

Press SETUP to exit.

NOTE

¡ Language Setting for Audio and Subtitle is not available with some discs. Then use the AUDIO and the

SUBTITLE button. Details are on page 24.

TO CHANGE THE ON-SCREEN MENUS

You can access the TV SETUP menu by pressing

SETUP from the DVD mode. Refer to “Selecting the

Language” on page 15 to changing the on-screen menus.

¡ In case of selecting from the DVD mode, you cannot select “CHANNEL SET UP” menu.

Language

A-B

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

Chinese [CHI]

Corsican

Croatian

Czech

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Faroese

Fiji

Finnish [FIN]

F-H

French [FRE]

Frisian

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

Kurdish

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

5261

5256

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Code Language

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Serbo-Croatian

Sesotho

Setswana

Shona

Sindhi

Singhalese

Siswat

Slovak

Slovenian

Somali

Spanish [SPA]

Sundanese

Swahili

Swedish [SWE]

T

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

U-Z

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian [NOR]

O-R

Occitan

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

S

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 24. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

Code

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

5861

5847

5868

5860

5866

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 27

DISPLAY SETTING

DVD-V

AUDIO SETTINGS

Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs.

You can change certain aspects of the DVD display screens and on-screen messages on the TV screen.

1



1



QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

ON

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

ON

2


ENTER.

¡ CUSTOM mode will appear.

2


ENTER.

¡

CUSTOM mode will appear.

3

Press Arrow (s/ B) to select AUDIO, then

press ENTER to confirm.

3

Press Arrow (s/ B) to select DISPLAY, then

press ENTER to confirm.

AUDIO

DRC

DOLBY DIGITAL

OFF

ON

DOWN SAMPLING ON DISPLAY

TV MODE 4:3 LETTER BOX

ANGLE ICON ON

AUTO POWER OFF ON

4

Press Arrow (

K / L

) to select the below items, then press ENTER.

TV MODE:

QUICK

¡ Press Arrow (K/L) for an item selection, then press

ENTER.

¡ Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen.

¡ Select 4:3 PAN & SCAN for a full height picture with both sides trimmed.

¡ The default setting is 4:3 LETTER BOX.

4

Press Arrow (

K / L

) to select the below items, then press ENTER.

DRC (Dynamic Range Control):

¡ To compress the range of sound volume.

¡ The default setting is OFF.

DOLBY DIGITAL:

QUICK

Set to On when the unit is connected to a Dolby Digital

Decoder.

(ON: Output by Dolby Digital)

(OFF: Convert the Dolby Digital to PCM (2 channel stereo))

¡ The default setting is ON.

ANGLE ICON:

¡ Press ENTER repeatedly to turn Angle icon ON or

OFF.


DOWN SAMPLING:

¡ Set to ON when outputting in 48 kHz.


When playing disc with copyright Protection

¡ If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz.

AUTO POWER OFF:

¡ Press ENTER repeatedly to turn Auto Power off ON or OFF.

¡ The default setting is ON and it will turn the

TV/DVD to off automatically after 15 minutes of no use.

5


5


EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 28

PARENTAL CONTROL

DVD-V

Parental Control limits the disc viewing that exceed your settings. (with a password or playback will stop.)

This feature allows you to prevent discs with alternative scenes from being played by your children.

PARENTAL LEVEL

Parental Level allows you to set the rating level of your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.

1

Press SETUP twice in STOP mode so that the QUICK SETUP menu appears.


CONTROL LEVELS

¡ALL

All parental lock is cancelled.

¡Level 8

DVD software of any grade (adult/general/children) can be played back.

¡Levels 7 to 2

Only DVD software intended for general use and children can be played back.

¡Level 1

Only DVD software intended for children can be played back, with those intended for adult and general use prohibited.

IF YOU FORGET THE PASSWORD

QUICK SETUP

TV MODE

DOLBY DIGITAL

4:3 LETTER BOX

ON

1

Press 4, 7, 3, 7 at step 4. Then enter your new password.

¡

Password will be cleared and parental level will be set to ALL.

2

Press

B

to select CUSTOM, then press

ENTER.

3

Press Arrow (

s

/B

) to select PARENTAL, then press ENTER.

2

Proceed the above Steps 5-7 again.

PARENTAL

PARENTAL LEVEL ALL

4

Enter your four-digit password then press

ENTER.

5

Press Arrow (

K / L

) to select PARENTAL

LEVEL, then press ENTER.

6

Press Arrow (

K / L

) to select the desired level.

7

Press SETUP to exit

NOTES

¡ When doing this for the first time, enter any 4 digits.

(except for 4737) That number will be used as the password from the second time onward.

¡ To change the password, press Arrow (K/L) to select CHANGE at step 5, then press ENTER. Enter the four-digit pass-word, then press ENTER.

¡ With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

¡ Record the password in case you forget it.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 29

TROUBLESHOOTING GUIDE

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the player, consulting the following checklist.

Problem

No power.

The TV/DVD does not respond to the remote control.

Corrective Action

•

Make sure the power plug is connected to an AC outlet.

•

Make sure the power is turned on.

•

Check if the power plug is connected to an AC outlet.

•

Check the batteries in the remote control.

•

Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote.

•

You have to be within 23 feet of the TV/DVD.

•

Check if the correct mode is selected. If not switch the mode by pressing SELECT on the remote control,whichever you need.

TV Mode

Problem

No Picture or Sound

Bars On Screen

Picture Distorted or Blurred

Picture Rolls Vertically

Lines or Streaks in Picture

No Color

Poor Reception on Some Channels

Ghosts in Picture

Weak Picture

Sound OK, Picture Poor

Picture OK, Sound Poor

Different color marks on screen.

Corrective Action

•

Try a new channel, if OK, then possible station trouble.

•

Make sure the power is turned on.

•

Press SELECT on the remote control to select TV mode. Then try other TV feature.

•

Is antenna connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•


•

Check for local interference.

•


•


•


•


•


•


•


•


•

Adjust COLOR control.

•


•


•


•


•


•


•


•

Adjust CONTRAST & BRIGHT control.

•


•


•


•


•

Adjust CONTRAST & BRIGHT control.

•


•


•

Magnetism from nearby appliances and geomagnetism might affect the color of the TV picture. Move the TV/DVD away from the appliances, the TV/DVD can repair itself automatically. If you want to repair immediately, unplug the TV/DVD power cord, then plug it in again 30 minutes or so later.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 30

DVD Mode

No picture.

Problem Corrective Action

• Connect the video cables firmly.

• Insert a correct video disc that plays on this TV/DVD.

• Press SELECT on the remote control to select DVD mode. Next, press PLAY or OPEN/CLOSE. Then, try other DVD feature.

• Insert the disc.

Disc cannot be played.

• Clean the disc.

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

• Connect the audio cables firmly.

No sound.

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

• This TV/DVD does not support DTS audio. This is not a malfunction.

No DTS audio is output.

Distorted picture.

• There are some cases where pictures may be slightly distorted, which are not a sign of a malfunction.

Audio or subtitle language does not match the set up

• Although pictures may stop for a moment, this is not a malfunction.

• The selected language is not available for audio or subtitles on the DVD.

This is not a malfunction

The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera angles. This is not a malfunction

Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected changed language. This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by the player or the disc.

screen, prohibiting an operation

CD sound dropout

No CD reproduction

DVD picture dropout

DVD picture freeze

DVD picture in mosaic

No DVD reproduction

This is not a malfunction.

• Scratched disc. Replace the disc with unscratched one.

NOTES:

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

EN

0C28

TD001.QX33 03.1.31 10:31 PM Page 31

MAINTENANCE

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of the TV/DVD with a soft cloth immersed in lukewarm water and wrung dry.

•

Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces.

SERVICING

•

Should your TV/DVD become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800-

968-3429, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

•

If the player still does not perform properly when it is operated while referring to the relevant sections and to

"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Recordable

ReWritable

DISC HANDLING

•

Use discs which have the following logos on them.

(Optical audio digital discs.)

•

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

•

Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•

Always store the disc in its protective case when it is not used.

EN

0C28

TD001.QX33 03.2.3 6:26 PM Page 32

SPECIFICATIONS

GENERAL SPECIFICATIONS

TV

CRT : 9 inch in-line gun,

90˚ deflection tube

NTSC-M Television system:

TV Standard

Closed caption system: §15.119/FCC

Channel coverage:

VHF:

UHF:

CATV:

2 ~ 13

14 ~ 69

2 ~13, A ~ W,

Tuning System:

Channel access:

W+1 ~ W+84,

A-5 ~ A-1, 5A

181 channel frequency synthesized tuning system

Direct access keyboard, programmable scan and up/down

ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Terminals

Antenna input:

Headphone:

Coaxial digital

VHF/UHF/CATV

75 ohm unbalanced (F-type)

Video input: RCA connector

[

1

Audio L/R input: RCA connector

[

2

1/8” stereo (3.5 mm) audio output

(only DVD): One pin jack,

500m Vpp (75 ohm)

Analog audio L/R output:

Remote control:

RCA connector

[

2

Digital encoded infrared light system

Operating temperature: 5°C to 40°C

(41°F~104°F)

Power requirement : AC 120V/60Hz

DC 13.2V

Power consumption : AC 55W / DC 60W

(Maximum)

Dimensions: H:12-1/4” (311mm)

W:10-7/8” (276mm)

Weight:

D:12-1/2” (318mm)

17.6 lbs (8.0 kg)

DVD

Discs: DVD video, Audio CD

Output signal format: NTSC color

Frequency response

(output jack)

DVD (linear sound): 20 Hz to 22 kHz

(sample rate: 48 kHz)

CD:

Signal-to-noise ratio

20 Hz to 44 kHz

(sample rate: 96 kHz)

20 Hz to 20 kHz

(S/N ratio)(output jack)

CD: 100 dB (EIAJ)

Dynamic range

(output jack)

DVD (linear sound): 85 dB

CD: 84 dB (EIAJ)

Total distortion factor

CD:

Wow and flutter:

0.07% (EIAJ)

Below the measurement limitation (+/-0.001%

W PEAK) (EIAJ)

•

Designs and specifications are subject to change without notice.

•

If there is a discrepancy between languages, the default language will be English.

– 32 –

EN

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 33

INDICE

■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 33

PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 33

MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 33

VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 34

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 34

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 34

LA ANTENA INTERIOR . . . . . . . . . . . . . . . . . . . . . . . . 35

CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 35

■ CONEXION MOVIL . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

CONEXIÓN A UN SISTEMA ESTÉREO . . . . . . . . . . . . 36

CONEXIÓN A UN AMPLIFICADOR EQUIPADO CON

TOMAS DE ENTRADA DIGITAL, PLATINA MD O

PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . . . . . . 36

CONEXCIONA UN DECODIFICADOR DOLBY

DIGITAL (Para DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

TV SECTION

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 37

SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 37

BORRADO (O AGREGACION) DE CANALES . . . . . . 37

DVD SECTION

■ REPRODUCCIÓN DE UN DVD DE VÍDEO O UN

CD DE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

REPRODUCCION BASICA . . . . . . . . . . . . . . . . . . . . . . 38

CONTROLES DE

OPERACIÓN Y FUNCIONES

PANEL FRONTAL DEL

TELEVISOR/DVD

Consulte la figura 1 de la página 8

MANDO A DISTANCIA


VISTA POSTERIOR


1. Bandeja de carga del disco

2. Toma de entrada VIDEO

Conecte aquí la toma de salida de vídeo de una videocámara o de una videograbadora.

3. Tomas de entrada AUDIO L/R

Conecte aquí las tomas de salida de audio de una videocámara o de una videograbadora.

4. Botón POWER

Púlselo para conectar y desconectar la alimentación.

5. Botones VOLUME

o

/p(VOL.m/n)

Púlselos para controlar el nivel del volumen para el DVD y el televisor.

6. Botones CHANNEL o/p(CH.o/p)

Púlselo para seleccionar el canal memorizado.

Púlselo para cambiar a un modo de televisor cuando esta en el modo de DVD.

7. Ventanilla del sensor del mando a distancia

8. Botón STOP

Detiene la operación del disco.

9. Botón SKIP H

Reproduce desde el inicio del capítulo o canción actual.

Botón SEARCH (REV) h (panel delantero)

Durante la reproducción o en el modo de pausa, mantenga presionado el botón durante unos segundos para cambiar la velocidad de reproducción hacia atrás.

10. Botón PLAY

Inicia la reproducción del contenido del disco.

Púlselo para cambiar a un modo de DVD cuando esta en el modo de televisor.

11. Botón SKIP G

Reproduce desde el inicio del siguiente capítulo o canción.

Botón SEARCH (FWD) g (panel delantero)

Durante la reproducción o en el modo de pausa, mantenga presionado el botón durante unos segundos para cambiar la velocidad de reproducción en avance.

12. Botón PAUSE

Hace una pausa en la operación del disco.

13. Botón OPEN/CLOSE

Púlselo para insertar discos en la bandeja o retirarlos de ella.

14. Toma HEADPHONE

Para conectar auriculares (no suministrados) y escuchar en privado.

15. Botón MODE

Activa el modo de reproducción programada o el modo de reproducción aleatoria cuand se reproducen CDs o MP3.

16. Botones de números

Modo del televisor:

Pulse dos dígitos para tener acceso directamente al canal deseado.

Recuerde pulsar "0" antes de elegir un canal de un solo dígito.

Botón +100

Púlselo para seleccionar canales de televisión por cable cuyo número sea igual o superior al 100.

Modo DVD:

Púlselo para introducir el número deseado.

Botón +10

Púlselo para introducir los números deseados cuyo número sea igual o superior al 10.

17. Botón SLEEP

Pulse el botón SLEEP para visualizar el temporizador para dormir y activar la función.

La hora de apagado puede determinarse por el número de veces que usted pulsa el botón. (0,

30,60,90 o 120 minutos)

18. Botón REV h

Presione para ver la imagen en DVD en retroceso rápido. Presione PAUSE y presione este botón para empezar la reproducción en cámara lenta. Presione repetidamente este botón para cambiar la velocidad en avance de la cámara lenta.

Botón FWD g

Presione para avanzar rápidamente en el disco.

Presione PAUSE y presione este botón para empezar la reproducción en cámara lenta.

Presione repetidamente este botón para cambiar la velocidad de avance de la cámara lenta.

19. Botón ZOOM

Expand la Imagen para que llene toda la pantalla.

– 33 –

ES

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 34

20. Botón SETUP

Púlselo para activar o salir del modo de menús de televisor o preparación de DVD.

21. Botón TITLE

Visualiza el menú de títulos.

22. Botón CLEAR

Repone un ajuste.

23. Botón DISPLAY

Modo del televisor:

Púlselo para visualizar el número del canal en la pantalla.

Si lo pulsa de nuevo, el número del canal desaparecerá.

Modo de DVD:

Visualiza el estado actual en la pantalla del televisor con fines de comprobación.

24. Botón SEARCH MODE

Púlselo para localizar un punto deseado.

25. Botón AUDIO

Púlselo para seleccionar un idioma de audio o un modo de sonido deseado.

26. Botón SUBTITLE

Púlselo para seleccionar un idioma de subtítulos deseado.

27. Botón REPEAT

Repite la reproducción del disco, título, capítulo o pista actual.

28. Botón ANGLE

Púlselo para cambiar el ángulo de la cámara y ver, desde un ángulo diferente, la secuencia que está siendo reproducida.

29. Botón A-B REPEAT

Repite la reproducción de una sección seleccionada.

30. Botón RETURN

Para volver a la operación anterior.

31. Botón ENTER

Púlselo para establecer un ajuste.

32. Botones de flechas

Modo de televisor:

Púlselo para seleccionar un modo de ajuste desde el menú que aparece en la pantalla del televisor.

Púlselo para seleccionar o ajustar desde un menú particular.

Modo de DVD:

Se utiliza cuando se hacen ajustes mientras se observa la visualización en una pantalla de televisor.

33. Botón DISC MENU

Visualiza menús en el DVD.

34. Botón SELECT

Púlselo para cambiar a un modo de televisor, modo de entrada externa o modo de DVD.

•

NOTA: Retire el cable de alimentación del gancho para evitar romperlo antes de conectarlo a una toma de CA convencional.

38. Toma de salida AUDIO L/R

Conéctela a la entrada de audio analógico de un amplificador o decodificador externo.

39. Toma de salida de audio digital COAXIAL

(DVD Audio solamente)

Conéctela a la entrada digital de un amplificador o decodificador externo.

40. Toma de entrada ANT.

Conéctela a una antena, sistema de televisión por cable o sistema de satélite.

41. Toma DC 13.2V

Conecte en el cable de batería del coche.

PARA INSERTAR LAS PILAS

1) Abra la cubierta del compartimiento de las pilas empujando la cubierta del mando a distancia en el sentido de la flecha.

2) Inserte 2 pilas "AA" en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-).

3) Vuelva a poner la cubierta.

NOTAS:

•

No mezcle pilas alcalinas y de manganeso.

No mezcle pilas viejas y nuevas.

PREPARACIÓN PARA LA

UTILIZACIÓN

CONEXIONES DE

ANTENA/CABLE


Nota para el instalador de sistemas CATV

Esta nota tiene la finalidad de llamar la atención del instalador de sistemas CATV para que tenga en cuenta el Artículo 820-40 del NEC, el cual proporciona consejos para hacer una conexión a tierra apropiada y, en particular, especifica que la tierra del cable deberá estar conectada al sistema de puesta a tierra del edificio, tan cerca del punto de entrada del cable como sea posible.

NOTA: Cuando seleccione el modo DVD con este botón, pulse primero PLAY u

OPEN/CLOSE. De lo contrario, las funciones del DVD no se activarán.

35. Botón MUTE

Pulse el botón MUTE para apagar el sonido de un programa de TV. (La visualización del nivel del sonido cambia de ROJO CLARO a AZUL

CLARO.) Pulse de nuevo el botón MUTE o el botón VOL m o n para restaurar el sonido.

36. Botón PICTURE

Presione para entrar en el modo de ajuste de imagen.

37. Cable de alimentación

Conéctelo a una toma de CA convencional

(120 V/60 Hz).

– 34 –

NOTA:

Antes de enchufar la antena a la toma ANT.IN del televisor/DVD, compruebe que la clavija no esté doblada. Si esta doblada, póngala derecha como se muestra en la ilustración, y luego conéctela en la toma ANT.IN del televisor/DVD.

Clavija doblada

Cable Clavija

(Necesita enderezarse) (Clavija derecha)

ANTENA COMBINADA DE VHF/UHF

La antena combinada de VHF/UHF de 75 ohmios puede conectarse al terminal ANT.

ES

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 35

ANTENA SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena exterior.

TELEVICION POR CABLE SIN CAJA

DE CONVERTIDOR / DECODIFICADOR

Utilice esta conexión si su sistema de televisión por cable se conecta directamente a su televisor/DVD sin una caja de convertidor. Utilice el mando a distancia del televisor/DVD para seleccionar los canales.

TELEVICION POR CABLE CON CAJA

DE CONVERTIDOR/DECODIFICADOR

O CAJA DE SATRLITE

Si su compañía de televisión por cable le suministra una caja de convertidor, o si usted utiliza un sistema de satélite, usted podrá utilizar la conexión básica mostrada aquí.

La selección de los canales deberá hacerse con la caja de convertidor o con la caja de satélite. Esto significa que los canales no se podrán cambiar utilizando el mando a distancia del televisor/DVD.

PARA VER UN CANAL

CODIFICADO/DECODIFICADO

1) Ponga el selector de canales del televisor/DVD en la posición del canal de salida de la caja de convertidor de televisión por cable o de la caja de satélite. (Ej., CH3)

2) Seleccione el canal que va a ver en su caja de convertidor de televisión por cable o caja de satélite.

LA ANTENA INTERIOR

La antena interior (suministrada) es desmontable.

Inserte el vástago de la antena en el orificio de la parte posterior superior del televisor/DVD. Conecte la antena interior al televisor/DVD. Para obtener la mejor recepción, extienda completamente la antena interior y luego haga los ajustes necesarios. (Evite tocar la sección superior cuando haga los ajustes.)

NOTA:

• La conexión de una antena interior puede no dar siempre una recepción de TV aceptable.


CONEXIÓN A TOMAS DE

ENTRADA EXTERNA

Cuando vea un programa grabado en otra fuente

(videograbadora o videocámara), utilice las tomas de entrada de audio/vídeo de la parte delantera del televisor/DVD.

Conecte las tomas de salida de audio/vídeo de otra fuente a las tomas AUDIO L/R y VIDEO de este televisor/DVD. Luego pulse SELECT hasta que aparezca "AUX" en la pantalla.

NOTA:

•

Cuando conecte una videograbadora monofónica

(otra fuente) a este televisor/DVD, conecte la toma de salida de audio de la videograbadora monofónica (otra fuente) a la toma AUDIO L de este televisor/DVD. El audio saldrá igualmente por los canales izquierdo y derecho.

CONEXION MOVIL

ADVERTENCIA: El conductor nunca debe mirar el TV/DVD mientras conduce un vehículo.

PRECAUCION:

•

Cuando se utiliza en un vehículo en movimiento, cerciórese que la unidad está asegurada en todo momento para evitar que sufra heridas. Consulte con un instalador profesional.

•

Si utiliza el TV/DVD con el motor del vehículo parado, vuelva a cargar la batería del vehículo después de unas 4 horas de uso para evitar que se agote. Después de terminar de utilizar el TV/DVD cerciórese de desenchufar el cable de batería de coche de la toma del encendedor de cigarrillos.

•

No utilice este TV/DVD durante la conducción.

•

No deje el TV/DVD en un coche.

•

Este TV/DVD no fue diseñado para utilizar en un coche.

1) La antena interior entregada es adecuada cuando el vehículo está estacionado. Para una mejor recepción en la calle o carretera, utilice una antena de TV móvil de VHF/UHF de alta calidad.

2) Enchufe el cable de batería de coche en el conector DC13,2 V (12V) en la parte trasera del

TV/DVD.

Para la toma del encendedor de cigarrillos del vehículo.

ANT.


Antena móvil con combinación de

VHF/UHF (no entregada)

Cable de batería de coche

(entregado)

DC 13.2V

AUDIO OUT

R

COAXIAL

ANT.

DC13.2V

– 35 –

ES

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 36

NOTAS:

•

Cerciórese que su vehículo tiene un sistema eléctrico con tierra negativa de 13,2 voltios (12 voltios).

•

Cerciórese de utilizar sólo el cable de batería de coche entregado. El uso de otros cables puede dañar el TV/DVD.

•

Cerciórese que la toma está limpia de cenizas y otros restos.

•

Cerciórese de enchufar firmemente el cable de batería de coche en la toma del encendedor de cigarrillos.

•

Desenchufe siempre la batería del coche de la toma del encendedor de cigarrillos antes de desenchufarlo del TV/DVD.

•

Debe desconectar el cable de batería de coche del

TV/DVD antes de poder utilizar la electricidad de

CA.

•

Cerciórese de cambiar el fusible sólo por uno del mismo tipo, 6A, 250V.

CONEXIÓN A UN SISTEMA

ESTÉREO


NOTAS:

•

Asegrese de desconectar la alimentación de todos los componentes del sistema antes de conectar otro componente.

•

Consulte el manual del propietario de su sistema estéreo y de cualquier otro componente que vaya a conectar al televisor/DVD.

•

Se escucha un sonido monoaural del sistema estéreo cuando el TV/DVD está en el modo de TV.

CONEXIÓN A UN

AMPLIFICADOR EQUIPADO

CON TOMAS DE ENTRADA

DIGITAL, PLATINA MD O

PLATINA DAT (Para DVD)

Utilice un cable digital coaxial de audio de venta en el comercio especializado para hacer las conexiones de audio.

•

Ponga DOLBY DIGITAL en OFF para la salida de audio en el modo de preparación. La reproducción en un televisor/DVD utilizando ajustes incorrectos puede causar distorsión de ruido, y también se pueden dañar los altavoces. (Consulte la página 29 para poner DOLBY DIGITAL en OFF.)

CONEXCIONA UN

DECODIFICADOR DOLBY

DIGITAL (Para DVD)

Si utiliza este televisor/DVD para reproducir un disco

DVD en un formato de sonido ambiental Dolby

Digital de 5,1 canales, el televisor/DVD dará salida a un flujo de datos DOLBY DIGITAL desde su toma de salida de audio digital COAXIAL. Conectando el reproductor a un decodificador Dolby Digital, usted podrá disfrutar de un ambiente más convincente y real, con un sonido ambiental potente y de alta calidad similar al de los cines.

Utilice cables digitales coaxiales de audio disponibles en el comercio especializado para hacer las conexiones de audio.


NOTAS:

•

Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de conector a otro componente.

•

Consulte los manuales del propietario de los componentes que vaya a conectar al televisor/DVD.

•

Si conecta un decodificador Dolby Digital, ponga

DOLBY DIGITAL en ON para la salida de audio en el modo de preparación. (Consulte la página 29 para poner DOLBY DIGITAL en ON.)

•

A menos que se haga la conexión a un decodificador Dolby Digital , ponga DOLBY

DIGITAL en OFF para la salida de audio en el modo de preparación. La reproducción en el televisor/DVD utilizando ajustes incorrectos puede generar distorsión de ruido, y también puede estropear los altavoces.

Fabricado bajo licencia de Dolby

Laboratories. “Dolby” y el símbolo de la D doble son marcas de fábrica de Dolby

Laboratories.


NOTAS:

•

La fuente de audio de un disco en un formato de sonido ambiental Dolby Digital de 5,1 canales no se puede grabar como sonido digital mediante una platina MD o DAT.

•

Asegúrese de desconectar la alimentación de todos los componentes antes de conectar otro componente.

•

Consulte los manuales del propietario de los componentes que va a conectar al televisor/DVD.

– 36 –

ES

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 37

TV SECTION

PREPARACIÓN PARA LA

UTILIZACIÓN

Puede programar el sintonizador para explorar todos los canales que pueda recibir en su zona.

NOTA: La programación de la memoria de canales no es necesaria cuando se hace la conexión a una caja de televisión por cable o a una caja de satélite. Ponga el selector de canales del televisor/DVD en la posición correspondiente al canal de salida de la caja de televisión por cable o caja de satélite (ej., CH3).

Luego seleccione el canal que va a ver en la caja de televisión por cable o en la caja de satélite.

SELECCIÓN DE IDIOMA

TV

1 Preparacion de canales por primera vez

Enchufe el cable de alimentación del televisor/DVD en una toma de CA.

NOTA:

Si aparecen algunos dígitos en la esquina de la pantalla, pulse POWER sin desenchufar el cable de la alimentación.

5 Tras la exploración

El sintonizador se detiene en el canal memorizado más bajo. Si desea recuperar los canales seleccionados, podrá seleccionar los canales directamente con los botones de números o

CHANNEL(CH.) K o L.

BORRADO

(O AGREGACION) DE CANALES

TV

Los canales que ya no reciban más o que se vean muy raramente podrán borrarse de la memoria. (Por supuesto, podrá volver a agregar en la memoria los canales que haya borrado de la misma.)

1 Seleccione “AJUSTE DE CANAL”

Pulse SETUP en el mando a distancia. Pulse K o L para apuntar a "AJUSTE DE CANAL".

Luego, pulse ENTER.

2 Seleccion “AGREGAR/BORRAR”

Pulse K o L para apuntar a "AGREGAR/BORRAR".

Luego, pulse ENTER.

2 Encienda el televisor/DVD

Pulse POWER para encender el televisor/DVD.

3 Introduzca el número del canal deseado

Pulse K o L hasta que aparezca el número del canal deseado. (Podrá utilizar también los botones de números o CH. K/L para introducirlos.)

(Ejemplo: CH8)

3 Seleccione el idioma de la pantalla

Pulse K o L para apuntar a "LANGUAGE".

Luego, pulse ENTER para seleccionar "ENGLISH" o

"ESP" = Spanish o "FRA" = French. "[ ]" indica el idioma seleccionado.

4 Inicie el preajuste automático

Pulse K o L para apuntar a

"AUTOPRESELECCION". Luego, pulse ENTER. El sintonizador explora y memoriza todos los canales activos de su zona.

NOTAS:

• El televisor/DVD distingue entre los canales de TV estándar y los canales de televisión por cable

(CATV).

• El televisor/DVD puede memorizar canales de TV como canales de CATV si las condiciones de la recepción no son buenas. Si pasa esto, vuelve a intentar la acción AUTOPRESELECCION cuando las condiciones de la recepción sean mejores.

4 Bórrelo de la memoria o agréguelo a ella

Pulse ENTER. Los números de los canales se encienden en rojo. El canal se borra de la memoria.

Canal agregado: Azul claro

Canal borrado: Rojo claro

¡

Para borrar otro canal, repita los pasos [3] y [4].

¡

Si pulsa de nuevo ENTER, el canal se memorizará de nuevo.

5 Salga del modo de preparación de canales

Pulse SETUP en el mando a distancia para volver al modo del televisor.

NOTA:

Para confirmar que los canales hayan sido borrado o agregados, pulse CHANNEL(CH.) K o L.

– 37 –

ES

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 38

DVD SECTION

REPRODUCCIÓN DE UN

DVD DE VÍDEO O UN CD

DE AUDIO

REPRODUCCION BASICA

DVD-V CD

Para empezar

¡ Conecte el interruptor del amplificador y otros equipos, si fuera necesario.

1 Pulse el boton POWER.

¡

La alimentación se conectará.

2 Pulse el botón OPEN/CLOSE.

¡ La bandeja de carga del disco se abrirá.

3 Ponga el dlsco en la bandeja con el lado de la eliguta hacia arriba.

4 Pulse el botón PLAY.

¡

La bandeja se cerrará automáticamente y la reproducción empezará luego desde el primer capítulo o pista del disco. Si la reproducción no empieza automáticamente, pulse PLAY.

¡ Cuando reproduzca un DVD que tenga grabado un menú de títulos, el menú aparecerá en la pantalla.

5 Pulse el botón STOP para detener la reproducción.

– 38 –

ES

0C28

TD001ES.QX33 03.1.31 10:32 PM Page 39

MEMO

– 39 –

ES

0C28

TD001.QX33 03.1.31 10:31 PM Page 33

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR:

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH

THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED

SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI

AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service procedure, please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION, INC.

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-968-3429 http://www.funai-corp.com

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in Malaysia 0EMN02108

TD001UB

★★★★★

Sylvania 6509DD TV DVD Combo Owner`s manual

OWNER’S

MANUAL

9-INCH COLOR TV/DVD

6509DD

This Owner’s Manual is made of recycled paper.

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-968-3429.

Or visit our WEB SITE at

http://www.funai-corp.com

Please read before using this equipment

WARNING:

CAUTION

IMPORTANT SAFEGUARDS

PRECAUTIONS

LOCATION

SUPPLIED ACCESSORY

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

WARNING

SYMBOLS USED IN THIS MANUAL

TABLE OF CONTENTS

FEATURES

TV Mode

DVD Mode

OPERATING CONTROLS AND FUNCTIONS

TV/DVD FRONT PANEL

TV/DVD REAR VIEW

REMOTE CONTROL

INSTALLING THE BATTERIES

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

VHF/UHF COMBINED ANTENNA

VHF/UHF SEPARATE ANTENNAS

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

CABLE WITH CONVERTER/DESCRAM-

BLER BOX OR SATELLITE BOX

INDOOR ANTENNA

CONNECTING TO EXTERNAL INPUT JACKS

MOBILE CONNECTION

CONNECTING TO A STEREO SYSTEM

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS, MD DECK OR DAT DECK (for DVD only)

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

TV SECTION

SET UP FOR USE

CHANNEL SET UP FOR THE

FIRST TIME

1

2

DELETING (OR ADDING)

CHANNEL

1

3

2

3

4

5

4

5

CHANNEL SET UP AGAIN

1

2

3

SELECTING THE LANGUAGE

1

2

TV OPERATION

WATCHING A TV PROGRAM

1

TV

2

3

PICTURE CONTROL

1

2

3

DEGAUSSING

SLEEP TIMER