advertisement
Basic Operating Instructions
Digital Camera
Model No.
DMC-LF1
Please read these instructions carefully before using this product, and save this manual for future use.
More detailed instructions on the operation of this camera are contained in “Operating Instructions for advanced features (PDF format)” in the supplied CD-ROM. Install it on your PC to read it.
Web Site: http://www.panasonic-europe.com
Model number suffix “EB” denotes UK model.
EB
VQT5A24
M0513KZ0
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic
Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your Digital Camera may look somewhat different from those shown in the illustrations in these Operating Instructions.
Carefully observe copyright laws.
•Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.
Information for Your Safety
WARNING:
To reduce the risk of fire, electric shock or product damage,
•Do not expose this unit to rain, moisture, dripping or
splashing.
•Use only the recommended accessories.
•Do not remove covers.
•Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
The socket outlet shall be installed near the equipment and shall be easily accessible.
■
Product identification marking
Product
Digital camera Bottom
Location
2
VQT5A24 (ENG)
■
About the battery pack
CAUTION
•Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.
•When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.
•Do not heat or expose to flame.
•Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above
60 °C or incinerate.
■
About the AC adaptor (supplied)
CAUTION!
To reduce the risk of fire, electric shock or product damage,
•Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
•The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
(ENG) VQT5A24
3
■
Cautions for Use
•Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).
•Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
•If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
•Do not use this unit near cell phones because doing so may result in noise adversely affecting the pictures and/or sound.
•Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors.
•Electromagnetic wave radiation generated by microprocessors may adversely affect this unit, disturbing the pictures and/or sound.
•If this unit is adversely affected by electromagnetic equipment and stops functioning properly, turn this unit off and remove the battery or disconnect AC adaptor (supplied). Then reinsert the battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
•If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound may be adversely affected.
4
VQT5A24 (ENG)
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www.doc.panasonic.de
Contact to Authorized Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
This product is intended for general consumer. (Category 3)
This product on purpose to connect to access point of 2.4 GHz WLAN.
This symbol indicates separate collection of waste electrical and electronic equipment.
More detailed information is contained in “Operating Instructions for advanced features (PDF format)”.
This symbol indicates separate collection of waste batteries.
More detailed information is contained in “Operating Instructions for advanced features (PDF format)”.
(ENG) VQT5A24
5
Contents
Information for Your Safety .... 2
Before use ................................ 6
Standard accessories ............. 7
Names and Functions of
Main Parts ................................ 9
Inserting and removing the battery or SD memory card
(optional) ................................ 11
Charging the battery ............. 12
Setting the clock .................... 13
Setting the menu ................... 14
Taking still pictures ............... 15
Recording motion pictures ... 17
Using the control ring ........... 18
Taking pictures with the composition determined
[Composition Guide] ............. 20
Viewing your pictures ........... 21
Deleting pictures ................... 22
What you can do with the
Wi-Fi
®
function ....................... 23
Reading the Operating
Instructions (PDF format) ..... 25
Supplied software .................. 26
Specifications ........................ 28
Before use
■
●
Keep the camera away from excessive vibration, force, or pressure.
●
The camera is not dust resistant, splash resistant, or waterproof.
Avoid using the camera in places with excessive dust or sand, or where water can come into contact with the camera.
■
Condensation (When the lens, the LCD monitor or the viewfinder is fogged up)
●
Condensation may occur when the camera is exposed to sudden changes of temperature or humidity. Avoid these conditions, which may make the lens, the LCD monitor or the viewfinder dirty, cause mould, or damage the camera.
●
If condensation does occur, turn off the camera and wait about two hours before using it. Once the camera adjusts to the surrounding temperature, the fogging will clear naturally.
6
VQT5A24 (ENG)
Standard accessories
Check that all the accessories are supplied before using the camera. Part numbers are as of May 2013. These may be subject to change.
Battery pack
DMW-BCN10E
•Charge the battery before use.
Battery pack is indicated as battery pack or battery in the text.
USB connection cable
K1HY08YY0034
AC adaptor
VSK0775
Hand strap
VFC4297
CD-ROM
•Software:
Use it to install the software on your
PC.
CD-ROM
VFF1215
•Operating
Instructions for advanced features
•SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the text.
• Cards are optional. You can record or play back pictures on the built-in memory when you are not using a card.
•Consult the dealer or your nearest Service Centre if you lose the supplied accessories. (You can purchase the accessories separately.)
•Please dispose of all packaging appropriately.
•Keep small parts in a safe place out of the reach of children.
•The illustrations and screens in this manual may differ from the actual product.
(ENG) VQT5A24
7
Standard accessories
■
Optional Accessories
Battery pack
USB connection cable
AV cable
DMW-BCN10
DMW-USBC1
DMW-AVC1
•Some optional accessories may not be available in some countries.
Sales and Support Information
Customer Communications Centre
•For customers within the U.K.: 0844 844 3899
•For customers within Ireland: 01289 8333
•Monday - Friday 9:00am - 5:00pm (Excluding public holidays).
•For further support on your product, please visit our website: www.panasonic.co.uk
Direct Sales at Panasonic U.K.
•Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre
Monday - Friday 9:00am - 5:00pm (Excluding public holidays).
•Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
•Most major credit and debit cards accepted.
•All enquiries transactions and distribution facilities are provided directly by
Panasonic U.K.
•It couldn’t be simpler!
•Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.
8
VQT5A24 (ENG)
15
16
17
18
19
20
11
12
13
Names and Functions of Main Parts
1 2 3 4 5
6
14
7
8
9
10
27
28
29
30
21 22 23 24 25 26
31 32 33 34
(ENG) VQT5A24
9
Names and Functions of Main Parts
1 Camera [ON/OFF] button
2 Shutter button
3 Mode dial
4 Microphones
5 [Wi-Fi] antenna
6 Diopter adjustment dial
7 Strap eyelet
8 Control ring
9 NFC antenna
10 Lens barrel
11 Zoom lever
12 Flash
13 Self-timer indicator/
AF Assist Lamp
14 Lens
15 Viewfinder
16 LCD monitor
17 [LVF] button
•Use this to switch display between viewfinder and LCD monitor.
18 [Wi-Fi] button
19 Charging lamp/
Wi-Fi
®
connection lamp
20 [Fn] button
21 Playback button
22 Control dial
23 Cursor button
•In this manual, the button that is to be used is indicated by
.
24 [MENU/SET] button
25 [DISP.] button
26 [Q.MENU/ ] / [ ] button
27 Motion picture button
28 Strap eyelet
•We recommend using the supplied hand strap to avoid dropping the camera.
29 [HDMI] socket
30 [AV OUT/DIGITAL] socket
•This socket is also used when charging the battery.
31 Tripod mount
•Do not attach to a tripod with a 5.5 mm (0.22 inch) or longer screw. Doing so may damage this unit.
32 Speaker
33 Card/Battery door
34 Release lever
10
VQT5A24 (ENG)
Inserting and removing the battery or
SD memory card (optional)
Make sure that the camera is turned off.
Slide the release lever ( ) to the
[OPEN] position and open the card/ battery door
Insert the battery and card, making sure that their orientation is correct
•Battery: Insert the battery all the way firmly and check that it is locked by lever ( ).
•Card: Insert the card all the way firmly until it clicks. Do not touch the terminals on the back of the card.
Close the door
Slide the release lever to the [LOCK] position.
■
To remove
•To remove battery:
Move lever in direction of arrow.
•To remove card:
Push the card until it clicks, then pull the card out.
Lever
Press Pull out
●
Always use genuine Panasonic batteries (DMW-BCN10E).
If you use other batteries, we cannot guarantee the quality of this product.
●
Keep the Memory Card out of reach of children to prevent swallowing.
We recommend using a Panasonic card.
(ENG) VQT5A24
11
Charging the battery
•The battery that can be used with this unit is DMW-BCN10E.
•The battery is not charged when the camera is shipped. Charge the
battery before use.
•Charge the battery with the AC adaptor (supplied) indoors (10 °C to
30 °C (50 °F to 86 °F)).
Make sure that the camera is turned off.
Insert the battery to this unit, and then connect this unit to the AC adaptor (supplied) ( ) or a PC ( )
To the electrical outlet
USB connection cable (supplied)
■
Charging lamp ( )
On: Charging in progress (Red)
Off: Charging stops (Charging time: Approx. 160 min)
When using the AC adaptor (supplied), observe the following points as improper connections may cause malfunctions.
●
Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).
●
Do not use any other AC adaptors except the supplied one.
Do not use the AC adaptor (supplied) or the USB connection cable (supplied) with other devices.
12
VQT5A24 (ENG)
Setting the clock
The clock is not set when the camera is shipped.
Disconnect the unit from the AC adaptor (supplied).
Press the Camera [ON/OFF] button ( )
Press [MENU/SET] ( )
Press to select the items (year, month, day, hour, minute, display order or time display format), and press to set
•To cancel → Press [Q.MENU/ ] button.
Press [MENU/SET] to set
Confirm the setting and press [MENU/SET]
•To return to the previous screen, press [Q.MENU/ ] button.
■
Changing time settings
Select [Clock Set] from [Rec] or [Setup] menu, perform and .
Please see the next page on how to set the menu.
(ENG) VQT5A24
13
Setting the menu
Refer to the following procedures to operate the menus.
Example: Setting [AF Mode] from to in the [Program AE] Mode
Press [MENU/SET] to display the menu
Switching to the [Rec] menu
Use cursor button to select [Rec] and press
[MENU/SET]
•Items can also be selected by turning the control dial.
Press to select [AF Mode] and then press [MENU/SET]
•Depending on the item, its setting may not appear or it may be displayed in a different way.
Press to select and then press
[MENU/SET] to set
Press [Q.MENU/ ] button several times to close the menu
•In recording mode, the menu screen can also be exited by pressing the shutter button halfway.
14
VQT5A24 (ENG)
Taking still pictures
Press the Camera [ON/OFF] button ( )
Set to the desired recording mode
Align the mode dial correctly to the mode that you want to use.
Use the zoom lever ( ) to adjust the range of the picture to be captured
Capture a wider area
(wide-angle)
Enlarge the subject
(telephoto)
Press the shutter button ( ) halfway to focus
Press the shutter button ( ) fully to take the picture
(ENG) VQT5A24
15
Taking still pictures
■
Recording mode
Take pictures with automatic settings.
Take pictures with automatic shutter speed and aperture value settings.
Determine aperture, then record pictures.
Determine shutter speed, then record pictures.
Determine aperture and shutter speed, then record pictures.
Record pictures using pre-registered settings.
Record panorama pictures.
Take pictures using Scene modes.
Take pictures by selecting your preferred picture effect.
■
Holding the camera
Flash AF Assist Lamp
Hand strap
●
To avoid camera shake, hold it with both hands keeping your arms close to your body while standing with your feet slightly apart.
●
Do not touch the lens.
Do not block the flash or the lamp. Do not look at it from close range.
16
VQT5A24 (ENG)
Recording motion pictures
You can record motion pictures with audio (stereo). Zoom can also be used during recording.
Press the motion picture button ( ) to start recording
●
Do not block the microphones ( ) when recording motion pictures.
●
Immediately release the motion picture button after pressing it.
Press the motion picture button ( ) again to end recording
●
About recording time
•You can continuously record a motion picture in [MP4] for up to 29 minutes
59 seconds or approx. 4 GB. (Since recording in [MP4] with [FHD] creates larger files, the recording time for such motion pictures will be shorter than
29 minutes 59 seconds.)
•You can continuously record [AVCHD] motion pictures for up to 29 minutes
59 seconds.
●
If the surrounding temperature is high, or a motion picture is recorded continuously, is displayed and recording may be stopped halfway through to protect the camera.
●
You can record a motion picture to the built-in memory only in [MP4] using the
[VGA] setting.
(ENG) VQT5A24
17
Using the control ring
Using the control ring allows you to perform frequently used operations and settings such as Step zoom and ISO Sensitivity directly.
Turn the control ring ( )
•You can also perform operations with the control dial. (Some operations may differ under certain recording conditions such as [Manual
Exposure] mode.)
(when in [Intelligent Auto]
Mode ( ))
Items that can be set by the control ring vary depending on recording modes.
Following are the pre-assigned settings.
Step zoom
ISO Sensitivity
Aperture adjustment
Shutter speed adjustment
Aperture adjustment
You can adjust the shutter speed with the control dial on the back.
Picture effects change
18
VQT5A24 (ENG)
Using Quick menu
Using the Quick menu, you can change camera settings with the control ring.
Press [Q.MENU/ ] button ( )
Press to select menu items
Turn the control ring to change the setting
•You can also change settings with the control dial.
Press [MENU/SET] ( )
(ENG) VQT5A24
19
Taking pictures with the composition determined
[Composition Guide]
By using the viewfinder or LCD monitor to consider the placement of your subject (the composition), you can take more impressive still pictures.
Press [Fn] button ( )
•[Fn Button Set] is set to [Composition
Guide] at the time of purchase. If another function has been set, select [Composition
Guide] from the [Setup] menu.
Press to select the guideline to display and press
[MENU/SET]
•To turn off guideline display, select [No Guide].
•If the guideline allows horizontal flipping, use to flip.
■
Guidelines (Examples)
[Rule of Thirds Offset] [Diagonal lines] [Tunnel]
[Radiation] [S-shape]
20
VQT5A24 (ENG)
Viewing your pictures
When a card is in the camera, pictures are played back from the card, and without a card, pictures are played back from the built-in memory.
Press the Playback button ( )
•By holding down the Playback button while the camera is off, you can turn the camera on in Playback Mode.
Press to select a picture to be displayed
•When the buttons are held down, the pictures can be scrolled quickly forward or backward.
•Pictures can also be selected with the control dial.
Folder/File number Picture number/Total pictures
(ENG) VQT5A24
21
Viewing your pictures
Viewing motion pictures
Select a picture with the motion picture icon, and press
Motion picture icon
(differs depending on the recording mode and picture quality setting)
Motion picture recording time
■
Operations during motion picture playback
: Pause/play
: Stop
: Fast rewind (2 steps)/Single-frame rewind (while paused)
: Fast forward (2 steps)/Single-frame forward (while paused)
[MENU/SET]: Capturing still pictures from motion pictures (while paused)
Control dial: Fast rewind/Fast forward (same as )
Zoom lever: Volume adjustment
Deleting pictures
Pictures will be deleted from the card if the card is inserted, or from the built-in memory if the card is not inserted. (Deleted pictures cannot be recovered.)
Press [ ] button ( ) to delete the displayed picture
Press to select [Yes] and then press [MENU/SET] ( )
22
VQT5A24 (ENG)
What you can do with the Wi-Fi
®
function
For details about Wi-Fi connections, please read “Wi-Fi connection guide”.
■
Using a smartphone as a camera remote control
By installing the “Panasonic Image App” on your smartphone, you can operate the camera remotely and use the smartphone to record and play back.
•By using the NFC function, you can hold your smartphone close to the camera and easily make a Wi-Fi connection without making troublesome
Wi-Fi settings.
■
Using WEB services
Through LUMIX CLUB, you can send still pictures and motion pictures to social networking services, etc. By selecting the setting to automatically transfer still pictures and motion pictures to [Cloud Sync. Service], you can receive the transferred still pictures and motion pictures on a PC or a smartphone.
Wireless access point
LUMIX CLUB
WEB services
Cloud synchronization services
(ENG) VQT5A24
23
What you can do with the Wi-Fi
®
function
■
Transferring pictures automatically [Smart Transfer]
During battery charging, recorded pictures are transferred automatically to
PC, AV equipment and cloud folders.
■
Sending pictures to Wi-Fi compatible equipment
You can select pictures on your camera and transfer them to a TV, printer, AV equipment, PC, etc.
Also, during recording, you can transfer still pictures as they are recorded
(except for transferring to a printer).
■
Panasonic Image App
The “Panasonic Image App” is an application provided by Panasonic.
For details, refer to “Wi-Fi connection guide”.
■
LUMIX CLUB
If you register this unit to the “LUMIX CLUB”, you can synchronize images between the devices you are using, or transfer these images to WEB services.
For details, refer to the “LUMIX CLUB” site.
http://lumixclub.panasonic.net/eng/c/
24
VQT5A24 (ENG)
Reading the Operating Instructions (PDF format)
More detailed instructions on the operation of this camera are contained in
“Operating Instructions for advanced features (PDF format)” in the supplied
CD-ROM. Install it on your PC to read it.
■
For Windows
Turn the PC on and insert the CD-ROM containing the
Operating Instructions (supplied)
Select the desired language and then click [Operating Instructions] to install
Double-click the “Operating
Instructions” shortcut icon on the desktop
■
When the Operating Instructions (PDF format) will not open
You will need Adobe Acrobat Reader 5.0 or later, or Adobe Reader 7.0 or later to browse or print the Operating Instructions (PDF format).
•You can download and install a version of Adobe Reader that you can use with your OS from the following website.
http://get.adobe.com/reader/otherversions/
(ENG) VQT5A24
25
Supplied software
The supplied CD-ROM contains the following software.
Install the software on your computer to use.
PHOTOfunSTUDIO
9.2 AE
SILKYPIX
Developer Studio
LoiLoScope
(30-day full-trial version)
Pictures can be captured to a PC, and can be viewed, organised, printed, etc. Also, still pictures can be corrected and motion pictures can be edited.
•Compatible OS: Windows 8 / 7 / Vista / XP
This software develops and edits RAW file pictures.
Edited pictures can be saved in a file format such as
JPEG or TIFF that can be displayed on a PC, etc.
For details on how to use the SILKYPIX Developer
Studio, refer to the “Help” or the Ichikawa Soft
Laboratory’s support website: http://www.isl.co.jp/SILKYPIX/english/p/support/
•Compatible OS: Windows 8 / 7 / Vista / XP
Mac OS X v10.4 / v10.5 / v10.6 / v10.7 / v10.8
You can edit motion pictures easily. This will only install a shortcut to the trial version download site.
For details about using LoiLoScope, please download and see the manual from the following site.
http://loilo.tv/product/20/
•Compatible OS: Windows 8 / 7 / Vista / XP
For details about operating environment and usage, please read “Operating
Instructions for advanced features” (PDF format) or the manuals for each
●
PHOTOfunSTUDIO / LoiLoScope are not compatible with Mac.
26
VQT5A24 (ENG)
Installing supplied software
Preparations:
•Check your PC’s specifications and operating environment for each software.
•Before inserting the CD-ROM (supplied), close all running applications.
■
Windows
Insert the CD-ROM with the supplied software
•The installation menu runs.
Click [Recommended Installation]
•Continue the installation procedure following the instructions displayed on the screen.
■
Mac (SILKYPIX Developer Studio)
Insert the CD-ROM with the supplied software
Double-click the recognised disc to open
Double-click the [SILKYPIX] folder to open
Double-click an icon in the folder
•Continue the installation procedure following the instructions displayed on the screen.
(ENG) VQT5A24
27
Specifications
Digital Camera: Information for your safety
Power Source
Power
Consumption
Camera effective pixels
Image sensor
DC 5 V
1.7 W (When recording with LCD Monitor)
1.1 W (When playing back with LCD Monitor)
12,100,000 pixels
Lens
1/1.7″ MOS sensor, total pixel number 12,800,000 pixels
Primary colour filter
Optical 7.1x zoom f=6.0 mm to 42.8 mm
(35 mm film camera equivalent: 28 mm to 200 mm) /
F2.0 (Max. Wide) to F5.9 (Max. Tele)
Optical method
Image Stabiliser
Focus range
Normal
Macro / iA mode /
Motion picture /
MF
Scene Mode
50 cm (1.6 feet) (Max. Wide) /
80 cm (2.6 feet) (Max. Tele) to
3 cm (0.098 feet) (Max. Wide) /
80 cm (2.6 feet) (Max. Tele) to
Shutter system
Shutter speed
Minimum
Illumination
The focus ranges listed above may vary depending on the selected Scene Mode.
Electronic shutter + Mechanical shutter
250 seconds to 1/4000th of a second
[Starry Sky] Mode:
15 seconds, 30 seconds, 60 seconds
Approx. 6 lx (when i-Low light is used, the shutter speed is 1/25th of a second)
28
VQT5A24 (ENG)
Exposure (AE)
Metering Mode
LCD monitor
Viewfinder
Programme AE (P) / Aperture-priority AE (A) /
Shutter-priority AE (S) / Manual exposure (M)
[Multi Metering] / [Center Weighted] / [Spot]
3.0″ TFT LCD (3:2) (Approx. 921,600 dots)
Colour LCD Viewfinder (Approx. 200,000 dots)
(with diopter adjustment -4 to +4 diopter)
Microphones
Speaker
Recording media
Stereo
Monaural
Built-in Memory (Approx. 87 MB)
SD Memory Card / SDHC Memory Card /
SDXC Memory Card
Recording file format
Still picture
RAW / JPEG (based on Design rule for Camera File system, based on Exif 2.3 standard /
DPOF corresponding) / MPO
Motion pictures
AVCHD / MP4
Audio compression format
AVCHD: Dolby
®
MP4: AAC (2 ch)
Digital (2 ch)
Interface
Digital
USB 2.0 (High Speed)
Data from the PC can not be written to the camera using the USB connection cable.
Analogue video
NTSC / PAL Composite (Switched by menu)
Audio
Terminal
Audio line output (Monaural)
HDMI: MicroHDMI TypeD
AV OUT/DIGITAL: Dedicated jack (8 pin)
Dimensions
Approx. 102.5 mm (W) x 62.1 mm (H) x 27.9 mm (D)
[4.0″ (W) x 2.4″ (H) x 1.1″ (D)]
(excluding the projection part)
(ENG) VQT5A24
29
Specifications
Mass
With card and battery: Approx. 192 (0.42 lb)
Excluding card and battery: Approx. 170 (0.37 lb)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating humidity 10%RH to 80%RH
Wi-Fi
Compliance standard
Frequency range used
(central frequency)
IEEE 802.11b/g/n
(standard wireless LAN protocol)
2412 MHz to 2462 MHz (1ch to 11ch)
Encryption method Wi-Fi compliant WPA™ / WPA2™
Access method
Infrastructure mode
NFC
Compliance standard
ISO / IEC 18092 NFC-F (Passive Mode)
AC adaptor
(Panasonic VSK0775): Information for your safety
Input
~ 110 V to 240 V, 50/60 Hz, 0.2 A
Output
5 V, 800 mA
Battery pack (lithium-ion)
(Panasonic DMW-BCN10E): Information for your safety
Voltage / capacity
3.7 V / 950 mAh
Specifications are subject to change without notice.
30
VQT5A24 (ENG)
•SDXC Logo is a trademark of SD-3C, LLC.
•HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
•HDAVI Control™ is a trademark of Panasonic Corporation.
•“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
•Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
•Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
•QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.
•App Store is a service mark of Apple Inc.
•The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
•The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
•“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
•DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
•This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered trademark of DynaComware Taiwan Inc.
•Other names, company names, and product names mentioned in these instructions are trademarks or registered trademarks of the companies concerned.
(ENG) VQT5A24
31
Manufactured by: Panasonic Corporation
Kadoma, Osaka, Japan
Importer: Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Web Site: http://panasonic.net
© Panasonic Corporation 2013
EU
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Information for Your Safety
- 6 Before use
- 7 Standard accessories
- 9 Main Parts
- 11 (optional)
- 12 Charging the battery
- 13 Setting the clock
- 14 Setting the menu
- 15 Taking still pictures
- 17 Recording motion pictures
- 18 Using the control ring
- 20 [Composition Guide]
- 21 Viewing your pictures
- 22 Deleting pictures
- 23 function
- 25 Instructions (PDF format)
- 26 Supplied software
- 28 Specifications