advertisement
Charging the battery
•The battery that can be used with this unit is DMW-BCN10E.
•The battery is not charged when the camera is shipped. Charge the
battery before use.
•Charge the battery with the AC adaptor (supplied) indoors (10 °C to
30 °C (50 °F to 86 °F)).
Make sure that the camera is turned off.
Insert the battery to this unit, and then connect this unit to the AC adaptor (supplied) ( ) or a PC ( )
To the electrical outlet
USB connection cable (supplied)
■
Charging lamp ( )
On: Charging in progress (Red)
Off: Charging stops (Charging time: Approx. 160 min)
When using the AC adaptor (supplied), observe the following points as improper connections may cause malfunctions.
●
Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).
●
Do not use any other AC adaptors except the supplied one.
Do not use the AC adaptor (supplied) or the USB connection cable (supplied) with other devices.
12
VQT5A24 (ENG)
advertisement
Related manuals
advertisement
Table of contents
- 2 Information for Your Safety
- 6 Before use
- 7 Standard accessories
- 9 Main Parts
- 11 (optional)
- 12 Charging the battery
- 13 Setting the clock
- 14 Setting the menu
- 15 Taking still pictures
- 17 Recording motion pictures
- 18 Using the control ring
- 20 [Composition Guide]
- 21 Viewing your pictures
- 22 Deleting pictures
- 23 function
- 25 Instructions (PDF format)
- 26 Supplied software
- 28 Specifications